Synthesis and helicity of optically active poly(N‐propargylphosphonamidates) having chiral phosphorus center

Novel chiral N‐propargylphosphonamidate monomers (HC?CCH₂NHP(?O)R? O? menthyl, 1 : R = CH₃, 2 : R = C₂H₅, 3 : R = n‐C₃H₇, 4 : R = Ph) were synthesized by the reaction of the corresponding phosphonic dichlorides with menthol and propargylamine. Pairs of diastereomeric monomers 1 – 4 with different ratios were obtained due to the chiral P‐center and menthyl group. One diastereomer could be separated from another one in the cases of monomers 1 and 2 . Polymerization of 1 – 4 with (nbd)Rh⁺[η⁶‐C₆H₅B^?(C₆H₅)₃] as a catalyst in CHCl₃ gave the polymers with number‐average molecular weights ranging from 5000 to 12,000 in 65–85%. Poly( 1 )–poly( 4 ) exhibited quantitative cis contents, and much larger specific rotations than 1 – 4 did in CHCl₃. The polymers showed an intense Cotton effect around 325 nm based on the conjugated polyacetylene backbone. It was indicated that the polymers took a helical structure with predominantly one‐handed screw sense, and intramolecular hydrogen bonding between P?O and N? H of the polymers contributed to the stability of the helical structure. Poly( 1a ) and poly( 2a ) decreased the CD intensity upon raising CH₃OH content in CHCl₃/CH₃OH. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 1515–1524, 2007     

Synthesis of polyisocyanide derived from phenylalanine and its temperature‐dependent helical conformation

Screw‐sense‐selective polymerization of the chiral isocyanide monomers derived from phenylalanine with NiCl₂ as a catalyst in methanol to yield helical‐conjugated polyisocyanide was investigated with respect to the thermal stability of its helical conformation. Poly(1‐tert‐butoxycarbonyl‐2‐phenylethyl isocyanide) (poly 1c ) took a stable helical conformer independent of the polymerization temperature. In poly(1‐ethoxycarbonyl‐2‐phenylethyl isocyanide) (poly 2c ), which had slightly smaller side groups, the helical conformation was thermally destabilized. The specific rotation and circular dichroism of poly 2c prepared at temperatures greater than 40 °C were considerably depressed in comparison with the values for poly 2c prepared at or below room temperature. Additionally, poly 2c prepared at low temperatures exhibited reversible temperature‐dependent specific rotation and circular dichroism, whereas poly 1c showed few changes. It is suggested that polyisocyanide derived from phenylalanine takes various helical conformers (i.e., from tightly to loosely coiled helices), the thermal stability of which depends on the size of the side group. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 40: 399–408, 2002     

alpha and piDL helical states of alternating poly(gamma-benzyl D-L-glutamate) in solution.

As in solid state, strictly alternating poly(gamma-benzyl D-L-glutamate) in solution can adopt two different helical conformations. Besides the alpha helix, a second helical conformation is found at higher temperatures in dioxane and chloroform, the properties of which correspond to that of the piDL4 helix. As the molecules have a finite length a screw sense is favored for both helical forms thus giving rise to optical activity allowing the study of the transconformation by optical rotatory dispersion and circular dichroism besides infrared and dielectric measurements. Thus, as the temperature is raised the equilibria right-left handed alpha helices and alpha-piDL helical forms can be followed. The favored screw senses are determined by the number of interacting side chains for the alpha helix and by the number of hydrogen bonds which are formed in the piDL helical conformation. The side chain-side chain interactions in the alpha helix are experimentally shown to be attractive.     

Control of helical chirality of poly(quinoxaline‐2,3‐diyl)s based on postpolymerization modification of the terminal group by small chiral molecules

Poly(quinoxaline‐2,3‐diyl)s having a terminal formyl or boronyl group were prepared by living polymerization of 1,2‐diisocyanobenzenes using organopalladium initiators bearing a protected formyl or boronyl group. Poly(quinoxaline‐2,3‐diyl)s were successfully deracemized by reacting them with small optically active molecules at their terminal formyl or boronyl group, leading to the induction of optically active helical structures. Poly(quinoxaline‐2,3‐diyl) having terminal formyl groups was converted to one‐handed helical polymer, in which the screw‐sense excess was 68% (84:16). The helix sense of the boronyl‐terminated poly(quinoxaline‐2,3‐diyl) was reversibly controlled by attaching and removing the chiral group. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Optically Active Polysilylenes: State‐of‐the‐Art Chiroptical Polymers

Controlled synthesis, chiroptical characterization, and manipulation of artificial helical polymers are challenging issues in modern polymer stereochemistry. Although many artificial polymers adopting a preferential screw‐sense helical structure have been investigated, optically active polysilylenes bearing chiral side chains may be among the most suitable to elucidate the inherent nature of the helical structure, since these polymers offer powerful spectroscopic probes as a result of their ideal chromophoric and fluorophoric main chain properties around 300–330 nm. The present paper will review comprehensively the helix‐property‐functionality relationship between side chain structure, global and local main chain conformation, (chir)optical properties, electronic properties, several helical cooperative phenomena, the effects of temperature and solvent polarity, and molecular imaging. This knowledge and understanding of the nature of the polysilylene helix might constitute a bridge between artificial polymers and biopolymers and will assist in designing and controlling new types of helical polymers directed to diverse screw‐sense‐related properties and applications in the future.     

Control of helix sense by composition of chiral-achiral copolymers of N-propargylbenzamides

N-Propargylbenzamides 1-7 were polymerized with (nbd)Rh(+)[eta(6)-C(6)H(5)B(-)(C(6)H(5))(3)] to afford polymers with moderate molecular weights (M(n) = 26,000-51,000) in good yields. The (1)H NMR spectra demonstrated that the polymers have fairly stereoregular structures (81-88 % cis). The optically active polymers, poly(1) and poly(2), were proven by their intense CD signals and large optical rotations to adopt a stable helical conformation with an excess of one-handed screw sense when heated in CHCl(3) or toluene. The sign of Cotton effect could be controlled by varying the content in the copolymers of either chiral bulky 1 and achiral nonbulky 3, or chiral nonbulky 2 and achiral bulky 7. The smaller the pendant group in the copolymerization of achiral monomers with 1, the more easily did the preferential helical sense change with the copolymer composition. However, the copolymers of chiral nonbulky 2 and achiral nonbulky 3 did not change the helical sense, irrespective of the composition. The free energy differences between the plus and minus helical states, as well as the excess free energy of the helix reversal, of those chiral-achiral random copolymers were estimated by applying a modified Ising model.     

Influence of stereoregularity and linkage groups on chiral recognition of poly(phenylacetylene) derivatives bearing L‐leucine ethyl ester pendants as chiral stationary phases for HPLC

Stereoregular poly(phenylacetylene) derivatives bearing L ‐leucine ethyl ester pendants, poly‐1 and poly‐2a , were, respectively, synthesized by the polymerization of N‐(4‐ethynylphenylcarbamoyl)‐L ‐leucine ethyl ester ( 1 ) and N‐(4‐ethynylphenyl‐carbonyl)‐L ‐leucine ethyl ester ( 2 ) using Rh(nbd)BPh₄ as a catalyst, while stereoirregular poly‐2b was synthesized by solid‐state thermal polymerization of 2 . Their chiral recognition abilities for nine racemates were evaluated as chiral stationary phases (CSPs) for high‐performance liquid chromatography (HPLC) after coating them on silica gel. Both poly‐1 and poly‐2a with a helical conformation showed their characteristic recognition depending on coating solvents and the linkage groups between poly(phenylacetylene) and L ‐leucine ethyl ester pendants. Poly‐2a with a shorter amide linkage showed higher chiral recognition than poly‐1 with a longer urea linkage. Coating solvents played an important role in the chiral recognition of both poly‐1 and poly‐2a due to the different conformation of the polymer main chains induced by the solvents. A few racemates were effectively resolved on the poly‐2a coated with a MeOH/CHCl₃ (3/7, v/v) mixture. The separation factors for these racemates were comparable to those obtained on the very popular CSPs derived from polysaccharide phenylcarbamates. Stereoirregular poly‐2b exhibited much lower chiral recognition than the corresponding stereoregular, helical poly‐2a , suggesting that the regular structure of poly(phenylacetylene) main chains is essential to attain high chiral recognition. © 2013 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Spectroscopic evidence for diastereomeric helical segments of polysilane bearing enantiopure (S)- and (R)-3,7-dimethyloctyl groups

We synthesized two optically active helical polysilanes, poly[(S)-3,7-dimethyloctyl-3-phenylpropylsilane] (PS1) and poly[(R)-3,7-dimethyloctyl-3-phenylpropylsilane] (PS2), bearing a flexible and rodlike silicon main chain and enantiopure alkyl side chains with (S)- and (R)-chiral centers, respectively, at the γ-positions. PS1 and PS2 underwent a thermodriven helix–helix transition at 10 °C in isooctane. Circular dichroism (CD) and UV studies demonstrated the transition characteristics, such as the transition temperature, population of right- and left-handed helical motifs, global shape, and screw pitch. At −80 °C, the dissymmetry ratio suggested that a preferential right-handed or left-handed screw sense was present in the polymer chains of PS1 and PS2, respectively. However, above the transition temperature, the appearance of a bisignate cotton band in the CD spectra suggested that both right-handed screw-sense, tight helical segments and left-handed screw-sense, loose helical segments coexisted in the same chains of PS1 and PS2. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 4518–4527, 2004     

Chiral oxazoline substituted optically active poly(m‐phenylene)s: Synthesis and coupling polymerizations of (S)‐4‐benzyl‐2‐(3,5‐dihalidephenyl) oxazoline using transition metal catalysts

Optically active poly(m‐phenylene)s substituted with chiral oxazoline derivatives have been synthesized by the nickel‐catalyzed Yamamoto coupling reaction of optically active (S)‐4‐benzyl‐2‐(3,5‐dihalidephenyl)oxazoline derivatives (X = Br or I). The structures and chiroptical properties of the polymers were characterized by spectroscopic methods and thermal gravimetric analyses. The polymers showed higher absolute optical specific rotation values than their corresponding monomer, and showed a Cotton effect at transition region of conjugated main chain. The optical activities of the polymers should be attributed to the higher order structure such as helical conformations. Moreover, the helical conformation could be induced by addition of metal salts into polymer solutions. The polymers showed good thermal stabilities, which was attributable to the oxazoline side chains. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Synthesis of optically active poly(N‐propargylsulfamides) with helical conformation

A novel chiral N‐propargylsulfamide monomer ( 1a ) and its enantiomer ( 1b ) were synthesized and polymerized with (nbd)Rh⁺B^?(C₆H₅)₄ as a catalyst providing poly(1) (poly( 1a ) and poly( 1b )) in high yields (≥99%). Poly(1) could take stable helices in less polar solvents (chloroform and THF), demonstrated by strong circular dichroism signals and UV–vis absorption peaks at about 415 nm and the large specific rotations; but in more polar solvents including DMF and DMSO, poly(1) failed to form helix. Quantitative evaluation with anisotropy factor showed that the helical screw sense had a relatively high thermal stability. These results together with the IR spectra measured in solvents showed that hydrogen bonding between the neighboring sulfamide groups is one of the main driving forces for poly(1) to adopt stable helices. In addition, copolymerization of monomer 1a and monomer 2 was conducted, the solubility of poly(1) was improved drastically. However, the copolymerization had adverse effects on the formation of stable helices in the copolymers. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 500–508, 2007     

Synthesis and characterization of optically active helical vinyl polymers via free radical polymerization

A facile synthetic route to prepare the dual‐functional molecule, 2,5‐bis(4′‐carboxyphenyl)styrene, was developed. The esterification of this compound with chiral alcohols, that is, (S)‐(+)‐sec‐butanol/(R)‐(?)‐sec‐butanol, (S)‐(+)‐sec‐octanol/(R)‐(?)‐sec‐octanol, and D ‐(+)‐menthol/L ‐(?)‐menthol, respectively, yielded three enantiomeric pairs of novel vinyl monomers, which underwent radical polymerization to obtain helical polymers with an excess screw sense. These polymers exhibited optical rotations as large as fourfold those of the corresponding monomers. Their helical conformations were quite stable as revealed by the almost unchanged chiroptical properties measured at different temperatures. The polymers with linear alkyl tails in the side‐groups formed irreversibly columnar nematic phases in melt although the corresponding monomers were not liquid crystalline. Whereas, the polymers with cyclic tails generated no mesophase. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 2408–2421, 2009     

Helical polyacetylenes carrying 2,2,6,6‐tetramethyl‐1‐piperidinyloxy and 2,2,5,5‐tetramethyl‐1‐pyrrolidinyloxy moieties: Their synthesis,properties, and function

2,2,6,6‐Tetramethyl‐1‐piperidinyloxy (TEMPO)‐ and 2,2,5,5‐tetramethyl‐1‐pyrrolidinyloxy (PROXYL)‐containing (R)‐1‐methylpropargyl TEMPO‐4‐carboxylate ( 1 ), (R)‐1‐methylpropargyl PROXYL‐3‐carboxylate ( 2 ), (rac)‐1‐methylpropargyl PROXYL‐3‐carboxylate ( 3 ), (S)‐1‐propargylcarbamoylethyl TEMPO‐4‐carboxylate ( 4 ), and (S)‐1‐propargyloxycarbonylethyl TEMPO‐4‐carboxylate ( 5 ) (TEMPO, PROXYL) were polymerized to afford novel polymers containing the TEMPO and PROXYL radicals at high densities. Monomers 1–3 and 5 provided polymers with moderate number‐average molecular weights of 8200–140,900 in 49–97% yields in the presence of (nbd)Rh⁺[η⁶‐C₆H₅B^?(C₆H₅)₃], whereas 4 gave no polymer with this catalyst but gave polymers possessing low M_n (3800–7500) in 56–61% yield with [(nbd)RhCl]₂‐Et₃N. Poly( 1 ), poly( 2 ), and poly( 4 ) took a helical structure with predominantly one‐handed screw sense in THF and CHCl₃ as well as in film state. The helical structure of poly( 1 ) and poly( 2 ) was stable upon heating and addition of MeOH, whereas poly( 4 ) was responsive to heat and solvents. All of the free radical‐containing polymers displayed the reversible charge/discharge processes, whose capacities were in a range of 43.2–112 A h/kg. In particular, the capacities of poly( 2 )–poly( 5 )‐based cells reached about 90–100% of the theoretical values regardless of the secondary structure of the polymer, helix and random. Poly( 1 ), poly( 2 ), and poly( 4 ) taking a helical structure exhibited better capacity tolerance towards the increase of current density than nonhelical poly( 3 ) and poly( 5 ) did. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 5431–5445, 2007     

Synthesis,structural, and retrostructural analysis of helical dendronized poly(1‐naphthylacetylene)s

Structural and retrostructural analysis of chiral, nonracemic ( poly [(3,4,5)dm8G1‐1EN] ), and achiral ( poly[(3,4,5)12G1‐1EN] ) poly(1‐naphthylacetylene)s demonstrates new design principles for helical dendronized polyarylacetylenes. The oblate cylindrical dendronized polymers self‐organize in a c2mm centered rectangular columnar (Φ_r‐c) lattice. An all cis‐polyene backbone microstructure with very high cisoid character is introduced to rationalize features from small‐ and wide‐angle X‐ray diffraction experiments. More compact helical conformations are ideal for efficient communication or amplification of chirality over long distances. Peripheral chiral tails select a preferred helical screw sense of the polyene backbone. In solution, the preferred helical conformation persists over a wide temperature range. In bulk, the naphthyl moiety facilitates a longer correlation length for helical order compared to an analogous minidendritic poly(phenylacetylene). These attributes suggest that the naphthyl moiety may be better suited for expressing helical chirality in monolayer domains. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 4974–4987, 2007     

pH-responsive self-assembly and conformational transition of partially propyl-esterified poly(alpha,beta-L-aspartic acid) as amphiphilic biodegradable polyanion

Poly(alpha,beta-L-aspartate) (PAsp) was partially esterified to afford an amphiphilic biodegradable polyanion, poly(sodium aspartate-co-propyl aspartate) (PAsp-Na/PAsp-P). The synthesized polyanion could be assembled into the nano-scaled aggregates in aqueous medium. The aggregate morphologies were studied by scanning electron microscopy (SEM) and transmission electron microscopy (TEM) as a function of pH. It was demonstrated that micellization of this random copolymer occurred with stimulus of pH changes to form various morphological micelles. The copolymer existed as precipitate at low pH (pH<2). When pH increased to 4, the polymers were associated into spherical micelles with the core of poly(propyl aspartate) (PAsp-P) hydrophobic units and shell of some negatively charged poly(sodium aspartate) (PAsp-Na) units. At higher pH (pH>5), toroidal nanostructures of the micelles were formed because rigid polyamide chains directly assemble into the large hollow spheres. The CD study showed that the conformation underwent a transition between alpha-helix and random coil at pH 3-7. The cooperative transitions were regulated by the degree of ionization of carboxylic side chains. When they were protonated (neutralized), the molecular backbone was in favor of the regular helical structure; when deprotonated (ionized), the electrostatic repulsions among side chains destabilized the intramolecular hydrogen bonds, thus randomizing the regular conformation.     

Hydrogen bonding and the conformations of poly(alkyl acrylamides)

The conformations of poly(alkyl acrylamide) oligomers in nonpolar solvents were studied using molecular dynamics techniques. Poly(methyl acrylamide) was found to collapse to a globule-like conformation at low temperatures; however, excluded volume effects inhibited the collapse of poly(octadecyl acrylamide). A high density of structured units, characterized by a trans-gauche-trans-trans-gauche-trans torsional sequence along the backbone, was noted in all simulations. Such units were found to create a particularly stable set of intramolecular hydrogen bonds. An oligomer constructed with these stable units was found to have significantly lower minimized energy than both the all-trans and the helical backbone conformations. The constructed conformation had lower Coulomb energy (more hydrogen bonds) than the all-trans conformation and lower dihedral energy (less backbone distortion) than the helical conformation. The propensity for poly(octadecyl acrylamide) to form hydrogen bonds introduced significant disorder into the orientation of the alkyl side chains. This disorder would inhibit crystallization and restrict the ability of such polymers to form epitaxial seeds for nucleating paraffin crystals.     

Synthesis and photoisomerization of poly(1‐methylpropargyl ester)s carrying azobenzene moieties

Optically active 1‐methylpropargyl esters bearing azobenzene groups, namely, (S)‐(?)‐3‐methyl‐3‐{4‐[4‐(n‐butyloxy)phenylazophenyl]carbonyl}oxy‐1‐propyne ( 1 ), (S)‐(?)‐3‐methyl‐3‐{4‐[4‐(n‐hexyloxy)phenylazophenyl]carbonyl}oxy‐1‐propyne ( 2 ), and (S)‐(?)‐3‐methyl‐3‐{4‐[4‐(n‐octyloxy)phenylazophenyl]carbonyl}oxy‐1‐propyne ( 3 ) were synthesized and polymerized with Rh⁺(nbd)[η⁶‐C₆H₅B^?(C₆H₅)₃] (nbd, norbornadiene) as a catalyst to afford the corresponding poly(1‐methyloropargyl ester)s with moderate molecular weights (M_n = 24,000–31,300) in good yields (79–84%). Polymers were soluble in common organic solvents including toluene, CHCl₃, CH₂Cl₂, THF, and DMSO, whereas insoluble in diethyl ether, n‐hexane, and methanol. Large optical rotations and strong CD signals demonstrated that all the polymers take a helical structure with a predominantly one‐handed screw sense. The helical structure of the polymers changed with the addition of MeOH and heat. The trans‐azobenzene of the polymer side chains isomerized into cis on UV irradiation, which was accompanied with drastic helical conformational changes of the polymer backbone. The cis‐azobenzene moiety reisomerized into trans on visible‐light irradiation, which induced the recovery of chiral geometry of azobenzene moieties in the side chain. Conformational analysis revealed that the polymers form a tightly twisted right‐handed helical structure with a dihedral angle of 70° at the single bond of the main chain. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 4749–4761, 2009     

Synthesis and chiroptical properties of L‐valine‐containing poly(phenylacetylene)s with (a)chiral pendant terminal groups

Poly(phenylacetylene)s containing L ‐valine residues (P 1 ) with (a)chiral pendant terminal groups R^(*) [?(HC?C{C₆H₄CONHCH[CH(CH₃)₂]COO? R^(*)})_n?]; R^(*) = 1‐octyl (P 1 o), (1S,2R,5S)‐(+)‐menthyl [P 1 (+)], (1R,2S,5R)‐(?)‐menthyl [P 1 (?)] are designed and synthesized. The polymers are prepared by organorhodium catalysts in high yields (yield up to 88%) with high molecular weights (M_w up to ?6.4 × 10⁵). Their structures and properties are characterized by NMR, IR, TGA, UV, and circular dichroism analyses. All the polymers are thermally fairly stable (T_d ≥ 320 °C). The chiral moieties induce the poly(phenylacetylene) chains to helically rotate in a preferred direction. The chirality of the pendant terminal groups affects little the helicity of the polymers but their bulkiness stabilizes the helical conformation against solvent perturbation. The backbone conjugation and chain helicity of the polymers can be modulated continuously and reversibly by acid. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 2117–2129, 2006     

Synthesis and properties of optically active amino acid based polyacetylenes bearing eugenol and fluorene moieties

Novel optically active amino acid based polyacetylenes bearing eugenol and fluorene moieties were synthesized, and their properties, including chiroptical ones, were analyzed. N‐[1‐(3,4‐Dimethoxyphenyl)‐2‐propyloxycarbonyl]‐L ‐alanine N′‐propargylamide ( 1 ), N‐[1‐(3,4‐dimethoxyphenyl)‐2‐propyloxycarbonyl]‐L ‐alanine propargyl ester ( 2 ), N‐(9‐fluorenylmethoxycarbonyl)‐L ‐alanine N′‐propargylamide ( 3 ), and N‐(9‐fluorenylmethoxycarbonyl)‐L ‐alanine propargyl ester ( 4 ) were polymerized with a rhodium‐zwitterion catalyst in tetrahydrofuran to afford the corresponding polymers with moderate molecular weights ranging from 10,800 to 17,300 in good yields. Because of the large specific rotation and circular dichroism (CD) signal, it was concluded that the poly(N‐propargylamide)s [poly( 1 ) and poly( 3 )] took a helical structure with a predominantly one‐handed screw sense. The solvent and temperature could tune the helical structure of poly( 1 ). On the other hand, the poly(propargyl ester)s [poly( 2 ) and poly( 4 )] exhibited only small specific rotations and CD signals. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 810–819, 2006     

Host–guest complexation‐triggered chiroptical change of poly(phenylacetylene)s bearing binaphthocrown ether moieties on the main chain

Diacetylene monomers with respective lengths of the oxyethylene chains were cyclopolymerized with a rhodium catalyst to produce novel poly(phenylacetylene)s bearing a different cavity size of the chiral crown ether in the repeating units ( 2a – c ). In the circular dichroism spectra of the resulting polymers, characteristic Cotton effects were observed in the range from 350 to 500 nm corresponding to the absorption of the conjugated polymer backbone, indicating that the polymers possessed a helical structure with an excess single screw sense induced by the covalently bonded binaphthyl units. The host–guest complexation of 2a – c with achiral guests produced a chiroptical change based on the fluctuation in the main chain conformation. The behavior of the complexation‐induced chiroptical change was essentially dictated by the cavity size of the binaphthocrown ether units. Additionally, a chirality‐responsive helicity change was observed in the case of the complexation of 2a – c with chiral guests, which also depended on the crown ether size. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 1197–1206, 2010     

Synthesis of double hydrophilic graft copolymer containing poly(ethylene glycol) and poly(methacrylic acid) side chains via successive ATRP

A well‐defined double hydrophilic graft copolymer, with polyacrylate as backbone, hydrophilic poly(ethylene glycol) and poly(methacrylic acid) as side chains, was synthesized via successive atom transfer radical polymerization followed by the selective hydrolysis of poly(methoxymethyl methacrylate) side chains. The grafting‐through strategy was first used to prepare poly[poly(ethylene glycol) methyl ether acrylate] comb copolymer. The obtained comb copolymer was transformed into macroinitiator by reacting with lithium diisopropylamine and 2‐bromopropionyl chloride. Afterwards, grafting‐from route was employed for the synthesis of poly[poly(ethylene glycol) methyl ether acrylate]‐g‐poly(methoxymethyl methacrylate) amphiphilic graft copolymer. The molecular weight distribution of this amphiphilic graft copolymer was narrow. Poly(methoxymethyl methacrylate) side chains were connected to polyacrylate backbone through stable C? C bonds instead of ester connections. The final product, poly[poly(ethylene glycol) methyl ether acrylate]‐g‐poly(methacrylate acid), was obtained by selective hydrolysis of poly(methoxymethyl methacrylate) side chains under mild conditions without affecting the polyacrylate backbone. This double hydrophilic graft copolymer was found be stimuli‐responsive to pH and ionic strength. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 4056–4069, 2008