Phase-vanishing reactions that use fluorous media as a phase screen. Facile,controlled bromination of alkenes by dibromine and dealkylation of aromatic ethers by boron tribromide

In fluorous triphasic reactions, such as bromination of alkenes by dibromine and dealkylation of aromatic ethers by boron tribromide, the middle fluorous phase acts as a liquid membrane permitting passive transport of the reagents at the bottom to the top layer involving the substrates, thereby regulating the reactions.     

Copper‐Catalyzed Regio‐ and Enantioselective Addition of Silicon Grignard Reagents to Alkenes Activated by Azaaryl Groups

A new application of silicon Grignard reagents in C(sp³)?Si bond formation is reported. With the aid of BF₃?OEt₂, these silicon nucleophiles add across alkenes activated by various azaaryl groups under copper catalysis. An enantioselective version employing benzoxazole‐activated alkenes as substrates and a CuI‐josiphos complex as catalyst has been developed, forming the C(sp3)?Si bond with good to high enantiomeric ratios (up to 97:3). The method expands the toolbox for “conjugate addition” type C(sp³)?Si bond formation.     

Reversible fluorous phase-switching of pyridyl-tagged porphyrins: Application to the sensing of histamine in water

Upon stirring a chloroform/perfluorodecalin biphasic system, the 5,10,15,20-tetrapyridyl porphyrin (TPyP) solubilized in the organic phase was almost quantitatively extracted (∼99.9%) into the fluorous phase containing an excess of the “heavy fluorous” copper(II)-carboxylate complex 1. The porphyrin was quantitatively and almost instantaneously released into the chloroform after addition of excess tetrahydrofuran (THF), which successfully competed with the pyridine ligand for binding sites on complex 1. Metallation of TPyP by copper(II) ions was never observed during the “catch-and-release” process. With the 5,10,15-tripyridyl-20-phenylporphyrin (TPyMPP) or the 5,15-dipyridyl-10,20-diphenylporphyrin (trans-DPyDPP) both efficient extraction (98%) and metallation occurred simultaneously leading to the immobilization of the metallated copper(II)-porphyrins in the fluorous phase. The metalloporphyrins were quantitatively released in the organic phase by addition of THF. With the 5-pyridyl-10,15,20-triphenylporphyrin (MPyTPP) no extraction but rapid metallation was observed under biphasic stirring leading to the quantitative recovery of the Cu²⁺-metalloporphyrin in the organic phase. The “catch-and-release” methodology of TpyP was exploited to develop a triphasic C₆F₁₄/DCM/water indicator displacement assay (IDA) for histamine in which the receptor–indicator complex is compartimentalized in the perfluorocarbon. It has been shown that in such IDA methodology the fluorous phase can play the role of a membrane impervious to water, allowing the detection of histamine in water at micromolar concentrations.     

The “Borrowing Hydrogen Strategy” by Supported Ruthenium Hydroxide Catalysts: Synthetic Scope of Symmetrically and Unsymmetrically Substituted Amines

The N‐alkylation of ammonia (or its surrogates, such as urea, NH₄HCO₃, and (NH₄)₂CO₃) and amines with alcohols, including primary and secondary alcohols, was efficiently promoted under anaerobic conditions by the easily prepared and inexpensive supported ruthenium hydroxide catalyst Ru(OH)_x/TiO₂. Various types of symmetrically and unsymmetrically substituted “tertiary” amines could be synthesized by the N‐alkylation of ammonia (or its surrogates) and amines with “primary” alcohols. On the other hand, the N‐alkylation of ammonia surrogates (i.e., urea and NH₄HCO₃) with “secondary” alcohols selectively produced the corresponding symmetrically substituted “secondary” amines, even in the presence of excess amounts of alcohols, which is likely due to the steric hindrance of the secondary alcohols and/or secondary amines produced. Under aerobic conditions, nitriles could be synthesized directly from alcohols and ammonia surrogates. The observed catalysis for the present N‐alkylation reactions was intrinsically heterogeneous, and the retrieved catalyst could be reused without any significant loss of catalytic performance. The present catalytic transformation would proceed through consecutive N‐alkylation reactions, in which alcohols act as alkylating reagents. On the basis of deuterium‐labeling experiments, the formation of the ruthenium dihydride species is suggested during the N‐alkylation reactions.     

Fluorous solvent as a new phase-screen medium between reagents and reactants in the bromination and chlorination of alcohols

[reaction: see text] A perfluorohexane layer regulates the rate of reagent transport in the bromination and chlorination of alcohols. A fluorous triphasic U-tube method is effective for lighter reagents; the thionyl chloride layer (yellow) vanishes, and the chlorides are obtained from the right top organic layer in the chlorination of alcohols.     

Oxidant promoted 1,3‐dipolar cycloaddition of benzimidazolium ylides to alkenes for preparation of 4H‐pyrrolo[1,2‐a]benzimidazole

An oxidant promoted 1,3‐dipolar cycloaddition of benzimidazolium ylides to alkenes was developed for the preparation of 4H‐pyrrolo[1,2‐a]benzimidazole derivatives in moderate yields under mild conditions. In the presence of a suitable oxidant, the most commercially available “normal” alkenes, instead of alkynes or “abnormal” alkenes, could be used as dipolarophiles successfully. Moreover, CrO₃/Et₃N has been proved to be a more effective dehydrogenating reagent than MnO₂ or tetrakispyridine cobalt (II) dichromate (TPCD) in this procedure.     

Polystyrene‐Supported (Catecholato)oxorhenium Complexes: Catalysts for Alcohol Oxidation with DMSO and for Deoxygenation of Epoxides to Alkenes with Triphenylphosphine

Polymer‐supported catalysts offer practical advantages for organic synthesis, such as improved product isolation, ease of catalyst recycling, and compatibility with parallel solution‐phase techniques. We have developed the (carboxypolystyrene‐catecholato)rhenium catalyst 2 derived from tyramine (=4‐(2‐aminoethyl)phenol), which is effective for alcohol oxidation with dimethylsulfoxide (DMSO) and for epoxide deoxygenation with triphenylphosphine. The supported [Re(catecholato)]catalyst 2 is air‐ and moisture‐stable and can be recovered and used repeatedly without decreasing activity. The procedures work with non‐halogenated solvents (toluene). DMSO for Re‐catalyzed alcohol oxidation is inexpensive and safer for transport and storage than commonly used peroxide reagents. The oxidation procedure was best suited for aliphatic alcohols, and the mild conditions were compatible with unprotected functional groups, such as those of alkenes, phenols, nitro compounds, and ketones (see Tables 1 and 2). Selective oxidation of secondary alcohols in the presence of primary alcohols was possible, and with longer reaction time, primary alcohols were converted to aldehydes without overoxidation. Epoxides (oxirans) were catalytically deoxygenated to alkenes with this catalyst and Ph₃P (see Table 3). Alkyloxiranes were converted to the alkenes with retention of configuration, while partial isomerization was observed in the deoxygenation of cis‐stilbene oxide ( cis‐1,2‐diphenyloxirane). These studies indicate that supported [Re(catecholato)] complexes are effective catalysts for O‐atom‐transfer reactions, and are well suited for applications in organic synthesis.     

Yb[N(SO2C8F17)2]3-catalyzed allylation of 1,3-dicarbonyl compounds with allylic alcohols in a fluorous biphase system

Allylation of 1,3-dicarbonyl compounds with allylic alcohols was successfully accomplished using rare earth metal (III) bis(perfluorooctanesulfonyl)imide [RE(NPf₂)₃, RE = La∼Lu] as catalysts in fluorous solvents. Ytterbium bis(perfluorooctanesulfonyl)imide [Yb(NPf₂)₃] catalyzes the high efficient reaction of allylation in fluorous solvents. By simple separation, fluorous phase containing only catalyst can be reused several times.     

Metal–Support Cooperative Catalysts for Environmentally Benign Molecular Transformations

Metal–support cooperative catalysts have been developed for sustainable and environmentally benign molecular transformations. The active metal centers and supports in these catalysts could cooperatively activate substrates, resulting in high catalytic performance for liquid‐phase reactions under mild conditions. These catalysts involved hydrotalcite‐supported gold and silver nanoparticles with high catalytic activity for organic reactions such as aerobic oxidation, oxidative carbonylation, and chemoselective reduction of epoxides to alkenes and nitrostyrenes to aminostyrenes using alcohols and CO/H₂O as reducing reagents. This high catalytic performance was due to cooperative catalysis between the metal nanoparticles and basic sites of the hydrotalcite support. To increase the metal–support cooperative effect, core–shell nanostructured catalysts consisting of gold or silver nanoparticles in the core and ceria supports in the shell were designed. These core–shell nanocomposite catalysts were effective for the chemoselective hydrogenation of nitrostyrenes to aminostyrenes, unsaturated aldehydes to allyl alcohols, and alkynes to alkenes using H₂ as a clean reductant. In addition, these solid catalysts could be recovered easily from the reaction mixture by simple filtration, and were reusable with high catalytic activity.     

Catalyst‐Free Hydroxytrifluoromethylation of Alkenes UsingIodotrifluoromethane

The importance of CF₃‐containing molecules in pharmaceuticals, agrochemicals and materials intrigues the intense interest in synthetic methodology of these compounds. With a purpose to enrich trifluoromethylation methodology, we carefully examined the substrate scope of hydroxytrifluoromethylation of alkenes using iodotrifluoromethane, and the reaction provided β‐trifluoromethyl alcohols in good yields under extremely mild conditions without catalysts. We found that our reaction can be applied to not only styrenes but also various aliphatic alkenes with excellent selectivity; no ketone was detected in most of our cases. Another feature of our discovery is “simple”. The reaction was carried out in air, irradiated by visible light, at room temperature and most importantly no catalyst was needed. A solution of CF₃I in DMSO was used as the facile trifluoromethylating reagent, which simplified the utilization of gaseous CF₃I. Based on ¹⁹F NMR spectroscopy, we observed a halogen bond between CF₃I and tertiary amine in this reaction. The interaction may promote single electron transfer by the visible light irradiation.     

Phase‐Transfer Activation of Transition Metal Catalysts

With metal‐based catalysts, it is quite common that a ligand (L) must first dissociate from a catalyst precursor (L′_nM?L) to activate the catalyst. The resulting coordinatively unsaturated active species (L′_nM) can either back react with the ligand in a k_?1 step, or combine with the substrate in a k₂ step. When dissociation is not rate determining and k_?1[L] is greater than or comparable to k₂[substrate], this slows the rate of reaction. By introducing a phase label onto the ligand L and providing a suitable orthogonal liquid or solid phase, dramatic rate accelerations can be achieved. This phenomenon is termed “phase‐transfer activation”. In this Concept, some historical antecedents are reviewed, followed by successful applications involving fluorous/organic and aqueous/organic liquid/liquid biphasic catalysis, and liquid/solid biphasic catalysis. Variants that include a chemical trap for the phase‐labeled ligands are also described.     

Ionic Transformations in Extremely Nonpolar Fluorous Media: Easily Recoverable Phase‐Transfer Catalysts for Halide‐Substitution Reactions

Solutions of the fluorous alkyl halides R_f8(CH₂)_mX (R_fn=(CF₂)_n?1CF₃; m=2, 3; X=Cl, Br, I) in perfluoromethylcyclohexane or perfluoromethyldecalin are inert towards solid or aqueous NaCl, NaBr, KI, KCN, and NaOAc. However, halide substitution occurs in the presence of fluorous phosphonium salts (R_f8(CH₂)₂)(R_f6(CH₂)₂)₃P⁺X^? (X=I ( 1 ), Br ( 3 )) and (R_f8(CH₂)₂)₄P⁺I^? (10 mol %), which are soluble in the fluorous solvents under the reaction conditions (76–100 °C). Stoichiometric reactions of a) 1 with R_f8(CH₂)₂Br and b) 3 with R_f8(CH₂)₂I were conducted under homogenous conditions in perfluoromethyldecalin at 100 °C and yielded the same R_f8(CH₂)₂I/R_f8(CH₂)₂Br equilibrium ratio (≈60:40). This shows that ionic displacements can take place in extremely nonpolar fluorous phases and suggests a classical phase‐transfer mechanism for the catalyzed reactions. Interestingly, the nonfluorous salt (CH₃(CH₂)₁₁)(CH₃(CH₂)₇)₃P⁺I^? ( 4 ) also catalyzes halide substitutions, but under triphasic conditions with 4 suspended between the lower fluorous and upper aqueous layers. NMR experiments established very low solubilities in both phases, which suggests interfacial catalysis. Catalyst 1 is easily recycled, optimally by simple precipitation onto teflon tape.     

Oxydifluoromethylation of Alkenes by Photoredox Catalysis: Simple Synthesis of CF2H‐Containing Alcohols

We have developed a novel and simple protocol for the direct incorporation of a difluoromethyl (CF₂H) group into alkenes by visible‐light‐driven photoredox catalysis. The use of fac‐[Ir(ppy)₃] (ppy=2‐pyridylphenyl) photocatalyst and shelf‐stable Hu's reagent, N‐tosyl‐S‐difluoromethyl‐S‐phenylsulfoximine, as a CF₂H source is the key to success. The well‐designed photoredox system achieves synthesis of not only β‐CF₂H‐substituted alcohols but also ethers and an ester from alkenes through solvolytic processes. The present method allows a single‐step and regioselective formation of C(sp³)–CF₂H and C(sp³)?O bonds from C=C moiety in alkenes, such as hydroxydifluoromethylation, regardless of terminal or internal alkenes. Moreover, this methodology tolerates a variety of functional groups.     

Access to Polysulfides through Photocatalyzed Dithiosulfonylation

In this study, we outline a general method for photocatalyzed difunctionalization of alkenes, a diene, alkynes, 1,3-enynes, and [1.1.1]propellane using dithiosulfonate reagents (ArSO₂-SSR) with improved atom economy. Both “ArSO₂-” and “-SSR” on the dithiosulfonate are transferred under mild conditions with broad substrate scope, high stereoselectivity, and complete regioselectivity. Significantly, the resulting dithiosulfonylated styrene is a general and practical nucleophilic disulfuration reagent, reacting with a variety of electrophiles efficiently. Both reactions can be conducted on gram scale, rendering the approach highly valuable.     

Cobalt(II) octanoate and cobalt(II) perfluorooctanoate catalyzed atom transfer radical polymerization of styrene in toluene and fluorous media—A versatile route to catalyst recycling and oligomer formation

Cobalt(II) perfluorooctanoate‐catalyzed atom transfer radical polymerization (ATRP) and reverse ATRP were developed to prepare oligostyrenes (M_n < 2500) with low polydispersities M_w/M_n < 1.5. Fluorous biphase catalysis was applied for effective recycling of catalyst and fluorous solvent. The homogeneous polymerization reaction was performed at 90 °C in toluene/cyclohexane/perfluorodecalin mixture (1:1:1) and fluorine‐free solvents. Temperature‐induced phase separation of this fluorous solvent mixture occurred at room temperature and proved to be the key for the very effective separation of the cobalt(II) perfluorooctanoate from the oligostyrene and fluorine‐free solvents. Both the fluorine‐tagged cobalt catalysts and the fluorous media were recycled and reused up to three times without encountering catalyst activity losses. The roles of cobalt catalysts, fluorous media, and monomer/initiator ratio were examined with respect to the polymerization kinetics. Fluorine‐containing and fluorine‐free cobalt(II) octanoate catalyzed controlled styrene oligomerization according to the ATRP mechanism. The molar mass control range was limited in fluorous biphase catalysis most likely because of precipitation of high molar mass polystyrenes in the fluorous reaction medium. To the best of our knowledge, this is the first time temperature‐induced phase separation of fluorous and fluorine‐free solvents has been successfully applied to polymerization processing. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 3804–3813, 2005     

Synthesis of Carbon/Sulfur Nanolaminates by Electrochemical Extraction of Titanium from Ti2SC

Herein we electrochemically and selectively extract Ti from the MAX phase Ti₂SC to form carbon/sulfur (C/S) nanolaminates at room temperature. The products are composed of multi‐layers of C/S flakes, with predominantly amorphous and some graphene‐like structures. Covalent bonding between C and S is observed in the nanolaminates, which render the latter promising candidates as electrode materials for Li‐S batteries. We also show that it is possible to extract Ti from other MAX phases, such as Ti₃AlC₂ , Ti₃SnC₂ , and Ti₂GeC, suggesting that electrochemical etching can be a powerful method to selectively extract the “M” elements from the MAX phases, to produce “AX” layered structures, that cannot be made otherwise. The latter hold promise for a variety of applications, such as energy storage, catalysis, etc.     

Shape,Size, and Phase‐Controlled Rare‐Earth Fluoride Nanocrystals with Optical Up‐Conversion Properties

High‐quality rare‐earth fluorides, α‐NaMF₄ (M=Dy, Ho, Er, Tm, Y, Yb, and Lu) nanocrystals and β‐NaMF₄ (M=Pr, Nd, Sm, Eu, Gd, Tb, Dy, Ho, Er, Tm, Y, Yb, and Lu) nanoarrays, have been synthesized by using oleic acid as a stabilizing agent through a facile hydrothermal method at 130–230 °C. The phase, shape, and size of the products are varied by careful control of synthetic conditions, including hydrothermal temperature and time, and the amounts of reactants and solvents. Tuning the hydrothermal temperature, time, and the amount of NaOH can cause the transformation from the cubic α‐NaMF₄ to hexagonal phase β‐NaMF₄. Upon adjustment of the amount of NaOH, NaF, M³⁺, and ethanol, the morphologies for the β‐NaMF₄ nanoarrays can range from tube, rod, wire, and zigzagged rod, to flower‐patterned disk. Simultaneously, the size of the rare‐earth fluoride crystals is variable from 5 nm to several micrometers. A combination of “diffusion‐controlled growth” and the “organic–inorganic interface effect” is proposed to understand the formation of the nanocrystals. An ideal “1D growth” of rare‐earth fluorides is preferred at high temperatures and high ethanol contents, from which the tube‐ and rodlike nanoarrays with high aspect ratio are obtained. In contrast, the disklike β‐NaMF₄ nanoarrays with low aspect ratios are produced by decreasing the ethanol content or prolonging the reaction time, an effect probably caused by “1D/2D ripening”. Multicolor up‐conversion fluorescence is also successfully realized in the Yb³⁺/Er³⁺ (green, red) and Yb³⁺/Tm³⁺ (blue) co‐doped α‐NaYF₄ nanocrystals and β‐NaYF₄ nanoarrays by excitation in the NIR region (980 nm).     

From C1 to C3: Copper‐Catalyzed gem‐Bis(trifluoromethyl)olefination of α‐Diazo Esters with TMSCF3

A Cu‐catalyzed gem‐bis(trifluoromethyl)olefination of α‐diazo esters, using TMSCF₃ as the only fluorocarbon source, has been developed and provides an exquisite method to access gem‐bis(trifluoromethyl)alkenes. This unprecedented olefination process involves a carbene migratory insertion into “CuCF₃” to generate the α‐CF₃‐substituted organocopper species, which then undergoes β‐fluoride elimination and two consecutive addition‐elimination processes to give the desired products. The key to this efficient one‐pot C₁‐to‐C₃ synthetic protocol lies in the controllable double (over single and triple) trifluoromethylations of the gem‐difluoroalkene intermediates.     

Stable Oxypyridinium Triflate (OPT) Salts for the Synthesis of Halobenzyl Ethers

A collection of new oxypyridinium triflate reagents (1a–d) for the synthesis of halobenzyl ethers from alcohols under “mix‐and‐heat” conditions is described. The reagents are stable organic salts that can be stored indefinitely and handled without special precautions, making them attractive for general use in organic synthesis. Halobenzylation of representative alcohols occurs in good to excellent yield.     

Cyclopropanation of Terminal Alkenes through Sequential Atom‐Transfer Radical Addition/1,3‐Elimination

An operationally simple method to affect an atom‐transfer radical addition of commercially available ICH₂Bpin to terminal alkenes has been developed. The intermediate iodide can be transformed in a one‐pot process into the corresponding cyclopropane upon treatment with a fluoride source. This method is highly selective for the cyclopropanation of unactivated terminal alkenes over non‐terminal alkenes and electron‐deficient alkenes. Due to the mildness of the procedure, a wide range of functional groups such as esters, amides, alcohols, ketones, and vinylic cyclopropanes are well tolerated.