Synthesis and morphology of Fe3O4/polystyrene/poly(isopropylacrylamide‐co‐methyl acrylate acid) magnetic composite latex – 2,2′‐azobis (2‐methylpropionamidine) dihydrochloride as initiator

In this work, Fe₃O₄/polystyrene/poly(N‐isopropylacryl amide‐co‐methylacrylate acid) (Fe₃O₄/PS/P(NIPAAM‐co‐MAA)) magnetic composite latex was synthesized by the method of two stage emulsion polymerization. In this reaction system, 2,2′‐azobis(2‐methyl propionamidine) dihydrochloride (AIBA) was used as initiator to initiate the first stage reaction and second stage reaction. The Fe₃O₄ particles were prepared by a traditional coprecipitation method. Fe₃O₄ particles were surface treated by either PAA oligomer or lauric acid to form the stable ferrofluid. The first stage for the synthesis of magnetic composite latex was to synthesize PS in the presence of ferrofluid by soapless emulsion polymerization to form the Fe₃O₄/PS composite latex particles. Following the first stage of reaction, the second stage of polymerization was carried out by the method of soapless emulsion polymerization with NIPAAM and MAA as monomers and Fe₃O₄/PS latex as seeds. The magnetic composite particles, Fe₃O₄/PS/P(NIPAAM‐co‐MAA), were thus obtained. The mechanism of the first stage reaction and second stage reaction were investigated. Moreover, the effects of PAA and lauric acid on the reaction kinetics, morphology, and particle size distribution were studied. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 3912–3921, 2007     

Synthesis and characteristics of poly(N‐isopropylacrylamide‐co‐methacrylic acid)/Fe3O4/poly(N‐isopropylacrylamide‐co‐methacrylic acid) two‐shell thermosensitive magnetic composite hollow latex particles

In this study, the poly(N‐isopropylacrylamide‐methylacrylate acid)/Fe₃O₄/poly(N‐isopropylacrylamide‐methylacrylate acid) (poly(NIPAAm‐MAA)/Fe₃O₄/poly(NIPAAm‐MAA)) two‐shell magnetic composite hollow latex particles were synthesized by four steps. The poly(methyl methacrylate‐co‐methylacrylate acid) (poly(MMA‐MAA)) copolymer latex particles were synthesized first. Then, the second step was to polymerize NIPAAm, MAA, and crosslinking agent in the presence of poly(MMA‐MAA) latex particles to form the linear poly(MMA‐MAA)/crosslinking poly(NIPAAm‐MAA) core–shell latex particles. Then, the core–shell latex particles were heated in the presence of NH₄OH to dissolve the linear poly(MMA‐MAA) core to form the poly(NIPAAm‐MAA) hollow latex particles. In the third step, the Fe₃O₄ nanoparticles were generated in the presence of poly(NIPAAm‐MAA) hollow polymer latex particles and formed the poly(NIPAAm‐MAA)/Fe₃O₄ magnetic composite hollow latex particles. The fourth step was to synthesize poly(NIPAAm‐MAA) in the presence of poly(NIPAAm‐MAA)/Fe₃O₄ latex particles to form the poly(NIPAAm‐MAA)/Fe₃O₄/poly(NIPAAm‐MAA) two‐shell magnetic composite hollow latex particles. The effect of various variables such as reactant concentration, monomer ratio, and pH value on the morphology and volume‐phase transition temperature of two‐shell magnetic composite hollow latex particles was studied. Moreover, the latex particles were used as carriers to load with caffeine, and the caffeine‐loading characteristics and caffeine release rate of latex particles were also studied. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 2880–2891     

Synthesis and characteristics of poly(N‐isopropylacrylamide‐co‐methacrylic acid)/Fe3O4 thermosensitive magnetic composite hollow latex particles

In this study, the poly(NIPAAm–MAA)/Fe₃O₄ hollow latex particles were synthesized by three steps. The first step was to synthesize the poly(methyl methacrylate‐co‐methylacrylate acid) (poly(MMA‐MAA)) copolymer latex particles by the method of soapless emulsion polymerization. Following the first step, the second step was to polymerize N‐isopropylacrylamide (NIPAAm), MAA, and crosslinking agent (N,N'‐methylene‐bisacrylamide (MBA)) in the presence of poly(MMA‐MAA) latex particles to form the linear poly(MMA‐MAA)/crosslinking poly (NIPAAm‐MAA) core‐shell latex particles. After the previous processes, the core‐shell latex particles were heated in the presence of NH₄OH to dissolve the linear poly(MMA‐MAA) core in order to form the poly(NIPAAm‐MAA) hollow latex particles. In the third step, Fe²⁺ and Fe³⁺ ions were introduced to bond with the ? COOH groups of MAA segments in the poly(NIPAAm‐MAA) hollow polymer latex particles. Further by a reaction with NH₄OH and then Fe₃O₄ nanoparticles were generated in situ and the poly(NIPAAm‐MAA)/Fe₃O₄ magnetic composite hollow latex particles were formed. The concentrations of MAA, crosslinking agent (N,N'‐methylene bisacrylamide), and Fe₃O₄ nanoparticles were important factors to influence the morphology of hollow latex particles and lower critical solution temperature of poly(NIPAAm–MAA)/Fe₃O₄ magnetic composite hollow latex particles. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Synthesis of P(AA‐SA)/ZnO composite latex particles via inverse miniemulsion polymerization and its application in pH regulation and UV shielding

Poly(acrylic acid‐co‐sodium acrylate)/zinc oxide, P(AA‐SA)/ZnO, composite latex particles were synthesized by inverse miniemulsion polymerization. The ZnO nanoparticles were prepared by hydrothermal synthesis and undergone oleic acid (OA) surface treatment. The X‐ray diffraction pattern and FT‐IR spectra characterized the crystal structure and functional groups of OA‐ZnO nanoparticles. An appropriate formulation in preparing P(AA‐SA) latex particles, ensuring the dominant in situ particle nucleation and growth, was developed in our experiment first. Sodium hydroxide was chosen as a costabilizer, because of its ability to increase the deprotonation of acylic acid and enhance the hydrophilicity of monomer, acrylic acid besides providing osmotic pressure. The growth mechanism of P(AA‐SA)/ZnO composite particles was proposed. The OA‐ZnO nanoparticles were adsorbed on or around the surface of P(AA‐SA) latex particles by hydrophobic interaction, thus enhanced the interfacial tension over latex particles. The P(AA‐SA)/ZnO composite latex particles owned better thermal stability than pure latex particles. The pH regulation capacity was excellent for both ZnO and P(AA‐SA) particles. Combining P(AA‐SA) and ZnO nanoparticles into composite particles, the performance in pH regulation and UV shielding was discussed from our experimental results. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 8081–8090, 2008     

A facile route to hollow superparamagnetic magnetite/polystyrene nanocomposite microspheres via inverse miniemulsion polymerization

In this article, we report a facile route to the preparation of hollow superparamagnetic magnetite/polystyrene nanocomposite microspheres via inverse miniemulsion polymerization at room temperature and under ambient pressure. Water droplets act as a soft template for the formation of hollow structure. Meanwhile, the existence of amphipathic magnetite nanoparticles (MPs) which can assemble at the interface of W/O is favorable to the interfacial polymerization of styrene, ensuring the formation of hollow nanocomposite microspheres. The final products were thoroughly characterized by X‐ray powder diffraction (XRD), fourier transform infrared spectroscopy (FTIR), transmission electron microscopy (TEM), field‐emission scanning electron microscopy (FESEM), thermogravimetric analysis (TGA), and X‐ray photoelectron spectroscopy (XPS), which showed the formation of hollow magnetite/polystyrene nanocomposite microspheres. Magnetic hysteresis loop measurements revealed that both MPs and hollow nanocomposite microspheres displayed superparamagnetism. The effects of the content of H₂O, sorbitan monooleate (Span 80) and styrene and the dose rate on the morphology of nanocomposite microspheres were studied. Furthermore, the mechanism of the formation of the hollow magnetic microspheres was also discussed. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 3900–3910, 2008     

Synthesis and morphology of an iron oxide/polystyrene/poly(isopropylacrylamide‐co‐methacrylic acid) thermosensitive magnetic composite latex with potassium persulfate as the initiator

In this work, an iron oxide (Fe₃O₄)/polystyrene (PS)/poly(N‐isopropylacryl amide‐co‐methacrylic acid) [P(NIPAAM–MAA)] thermosensitive magnetic composite latex was synthesized by the method of two‐stage emulsion polymerization. The Fe₃O₄ particles were prepared by a traditional coprecipitation method and then surface‐treated with either a PAA oligomer or lauric acid to form a stable ferrofluid. The first stage for the synthesis of the thermosensitive magnetic composite latex was to synthesize PS in the presence of a ferrofluid by emulsion polymerization to form Fe₃O₄/PS composite latex particles. Following the first stage of reaction, the second stage of polymerization was carried out with N‐isopropylacryl amide and methacrylic acid as monomers and with Fe₃O₄/PS latex as seeds. The Fe₃O₄/PS/[P(NIPAAM–MAA)] thermosensitive magnetic particles were thus obtained. The effects of the ferrofluids on the reaction kinetics, morphology, and particle size of the latex were discussed. A reaction mechanism was proposed in accordance with the morphology observation of the latex particles. The thermosensitive property of the thermosensitive magnetic composite latex was also studied. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 3062–3072, 2007     

Synthesis of large,high‐solid‐content latexes by miniemulsion polymerization

Multiple and diverse applications have been recently found for miniemulsions and miniemulsion polymerization. In this work, miniemulsion polymerization is presented as a suitable technique for the preparation of high‐solid‐content latices with large particle sizes. Monomer miniemulsions were prepared with a high‐pressure homogenizer, and droplet sizes of 200–700 nm were obtained. Latexes with particle sizes larger than the sizes commonly accepted for miniemulsion polymerization were obtained. With fixed operational conditions of the homogenizer, the type of stabilizer was the key parameter determining the droplet size and the droplet size distribution. The particle size of the latices obtained by miniemulsion polymerization indicated that the particles were mainly formed by droplet nucleation. Latexes obtained by this process have multiple applications, including use as seeds in the polymerization of high‐solid‐content latices. This article shows that potential new applications for miniemulsion polymerization are far from being exhausted. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 4222–4227, 2004     

Effects of alkali post‐treatment on the particle morphology of soap‐free poly(methyl methacrylate‐ethyl acrylate‐acrylic acid) latices

Poly(methyl methacrylate‐ethyl acrylate‐acrylic acid) P(MMA‐EA‐AA) latices with narrow particle size distribution and “clean” particle surface were first synthesized by batch soap‐free emulsion polymerization, and the latex particles with anomalous morphology were obtained by alkali post‐treatment. Effects of treatment temperature and time, initial pH value, as well as 2‐butanone amount, on the morphology of latex particles were investigated. Results showed that anomalous structure of the dried latex particles could be easily identified using transmission electron microscopy (TEM) observation under the conditions of temperature >60°C, initial pH > 10.5 and 4.0–7.0 ml of 2‐butanone used. The higher the pH value is, the earlier the anomalous structure will occur. The volume expansion (ΔV) of the particle increased with the increase in treatment temperature and 2‐butanone amount. However, with the increase of initial pH value and treatment time, ΔV increased first and then decreased, and different maximum of ΔV values were observed based on different conditions. Copyright © 2004 John Wiley & Sons, Ltd.     

Polymer encapsulation of yttrium oxysulfide phosphorescent particles via miniemulsion polymerization

Yttrium oxysulfide upconverting phosphor particles can absorb infrared light and emit dopant‐dependent visible phosphorescence. This unique optical property has been used for particle‐based immunoassay applications. In this study, upconverting phosphor particles were encapsulated with a functionalized polymer (carboxylated polystyrene) shell layer via several approaches, which included the following: (1) the physical adsorption of the carboxylated polystyrene polymer onto the phosphor surfaces, (2) the miniemulsification of the preformed carboxylated polystyrene in a solvent in the presence of the phosphor particles and the subsequent stripping off of the solvent, and (3) the miniemulsification and miniemulsion copolymerization of styrene and methacrylic acid in the presence of the phosphor particles with hexadecane as a costabilizer in combination with a surfactant (sodium dodecyl sulfate, sodium dodecylbenzene sulfonate, or sodium dihexyl sulfosuccinate). Miniemulsion technology proved to be the most effective method for forming a functionalized polymeric nanoshell surrounding the phosphor particles. The morphology of the encapsulated phosphor particles was found to vary from symmetric core–shell (i.e., a uniform nanoshell layer with varying shell thicknesses), asymmetric core–shell, dumbbell‐like, or raspberry‐like partial encapsulation to multiparticle encapsulation. The amount of multiparticle encapsulation could be reduced by the postaddition of a surfactant, but it could not be eliminated completely. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 1038–1054, 2007     

Surface functionalization of styrene/butyl acrylate latex with a water‐soluble monosaccharide monomer. Synthesis and morphology of the polymer particles

New polymer latexes bearing saccharide moieties on the particle surface were synthesized by using a water‐soluble sugar monomer, such as 1‐deoxy‐1‐methacryl‐amido‐D ‐glucitol, (MAG). All the latexes were prepared by a two‐stage emulsion polymerization technique. In the first step, the core was prepared with butyl acrylate (BA) and styrene (St). In the second step, the seed latex was polymerized with ethyl acrylate (EA) and MAG. The influence of a bifunctional monomer such as allyl methacrylate (ALMA), introduced at various concentrations, on the final latexes morphologies and properties was investigated. It was found that the latex particles exhibit a core‐shell structure. The mass balance of MAG showed that the main part of the sugar moiety is on the shell layer. The molecular properties, such as structure, composition, and molecular weight, were determined by elemental analysis, ¹H‐ and ¹³C‐NMR spectroscopy. Colloidal (particle size and their distributions), thermal, and rheological properties were also studied. Copyright © 2003 John Wiley & Sons, Ltd.     

Tailoring of carboxyl‐decorated magnetic latex particles using seeded emulsion polymerization

In this research, submicron and carboxyl‐functionalized magnetic latex particles were elaborated by using seeded emulsion polymerization technique in presence of oil‐in‐water (o/w) magnetic emulsion as seed. The polymerization conditions were optimized in order to get well‐defined latex particles with magnetic core and polymer shell bearing carboxylic (–COOH) functionality. Starting from (o/w) magnetic emulsion as seed, synthesis process was performed by copolymerization of styrene (St) monomer with the cross‐linker divinylbenzene (DVB) in presence of 4,4′‐azobis(4‐cyanopentanoic acid) (ACPA) as a carboxyl‐bearing initiator. The prepared magnetic latex particles were first characterized in terms of particle size, chemical composition, morphology, magnetic properties, magnetic content, and colloidal stability using various techniques, e.g. particle size analyzer using dynamic light scattering (DLS) technique, Fourier transform infrared, transmission electron microscopy, vibrating sample magnetometer, thermogravimetric analysis, and zeta potential measurements as a function of pH of the dispersion media, respectively. The prepared magnetic latex particles were then used as second seed for further functionalization with methacrylic acid (MAA) in order to enhance carboxylic groups on the magnetic particle's surface. The results showed that final magnetic latex particles possessed spherical morphology with core‐shell structure and enriched carboxylic acid functionality. More importantly, they exhibited superparamagnetism with high magnetic content (58.42 wt%) and high colloidal stability, which considered as the main requirements for their application in the biomedical diagnostic domains. Copyright © 2017 John Wiley & Sons, Ltd.     

Controllable preparation of epoxy‐functionalized magnetic polymer latexes with different morphologies by modified miniemulsion polymerization

The synthesis of functional magnetic polymer latexes (MPLs) with epoxy groups introduced via a modified miniemulsion polymerization route was described. The epoxy group content on the surface could be controlled by seed emulsion followed and characterized by FTIR and zeta potential measurements. We also developed a novel approach to achieve manipulation of the morphology of the MPLs based on kinetic control of the polymerization system. MPLs with different morphologies were obtained ranging from core–shell microstructures, dispersed microstructures to asymmetric microstructure, which were characterized by TEM, DLS, and TGA. The mechanisms of the contribution of kinetic factors such as polymerization rate, reaction time, and temperature contributing to the formation of the different morphologies were also investigated. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 2284–2293, 2010     

Fe3O4-PMMA复合纳米微球的制备与表征

采用化学共沉淀法合成了超顺磁Fe3O4纳米粒子,并采用油酸和油酸钠对其表面进行修饰,制备了可稳定分散于水中的磁流体。以该磁流体为种子,通过一步乳液聚合制备了表面带有功能化羧基的Fe3O4-聚甲基丙烯酸甲酯复合纳米微球（Fe3O4-PMMA）。利用动态光散射、透射电镜观察、傅里叶红外光谱、热失重分析、振动样品磁强计测试等手段表征了复合微球的尺寸、形态、结构、组成和磁性能。结果表明,复合微球的平均直径约120nm,表面带有羧基功能基团,在室温下具有超顺磁性和较高的饱和磁化强度。     

Synthesis of oily core‐hybrid shell nanocapsules through interfacial free radical copolymerization in miniemulsion: Droplet formation and nucleation

Nanocapsules with an oily core and an organic/inorganic hybrid shell were elaborated by miniemulsion (co)polymerization of styrene, divinylbenzene, γ‐methacryloyloxy propyl trimethoxysilane, and N‐isopropyl acrylamide. The hybrid copolymer shell membrane was formed by polymerization‐induced phase separation at the interface of the oily nanodroplets with water. It was shown that the size, size distribution, and colloidal stability of the miniemulsion droplets were extremely dependent on the nature of the oil phase, the monomer content and the surfactant concentration. The less water‐soluble the hydrocarbon template and the higher the monomer content, the better the droplet stability. The successful formation of nanocapsules with the targeted core‐shell morphology (i.e., a liquid core surrounded by a solid shell) was evidenced by cryogenic transmission electron microscopy. Both nanocapsules and nanoparticles were produced by polymerization of the miniemulsion droplets. The proportion of nanoparticles increased with increasing monomer concentration in the oil phase. These undesirable nanoparticles were presumably formed by homogeneous nucleation as we showed that micellar nucleation could be neglected under our experimental conditions even for high surfactant concentrations. The introduction of γ‐methacryloyloxy propyl trimethoxysilane was considered to be the main reason for homogeneous nucleation. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 593–603, 2010     

Further insight into the mechanism of poly(styrene‐co‐methyl methacrylate) microsphere formation

Polymeric microspheres have been used in a broad range of applications from chromatographic separation techniques to analysis of air flow over aerodynamic surfaces. The preparation of microspheres from many polymer families has consequently been extensively studied using a variety of synthetic approaches. Although there are a myriad of polymeric microsphere synthesis methods, free‐radical initiated emulsion polymerization is one of the most common techniques. In this work, poly(styrene‐co‐methyl methacrylate) microspheres were synthesized via surfactant‐free emulsion polymerization. The effects of co‐monomer composition and addition time on particle size distribution, particle formation, and particle morphology were investigated. Particles were characterized using dynamic light scattering and scanning electron microscopy to gain further insight into particle size and size distributions. Reaction kinetics were analyzed through consideration of characterization results. A particle formation mechanism for poly(styrene‐co‐methyl methacrylate) microspheres was proposed based on characterization results and known reaction kinetics. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 2249–2259     

Synthesis of iron oxide/poly(methyl methacrylate) composite latex particles: Nucleation mechanism and morphology

A magnetic poly(methyl methacrylate) (PMMA) composite latex was prepared by soapless emulsion polymerization in the presence of ferrofluid, and the ferrofluid was prepared by means of a coprecipitation method. The effects of various polymerization parameters, such as the monomer concentration, ferrofluid content, and initiator concentration, on the conversion curve and particle size of the magnetic composite latex particles were examined in detail. The results showed that two nucleation mechanisms were involved according to the polymerization conditions. In the monomer‐rich and less ferrofluid system, self‐nucleation of PMMA was dominant over the entire course of emulsion polymerization. In the ferrofluid‐rich system, seeded emulsion polymerization was the main course to form the magnetic composite latex particles. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 5695–5705, 2004     

Preparation of composite polyacrylate latex particles with in situ‐formed methylsilsesquioxane cores

Composite polyacrylate latex particles were prepared through a simple method by dissolving organosilicon monomer methyltrimethoxysilane in a monomer mixture of acrylic monomers methyl methacrylate (MMA), n‐butyl acrylate (n‐BA), and acrylic acid (AA). With the addition of water needed for hydrolysis, methyltrimethoxylsilane hydrolyzed under catalysis by AA and further condensed to form polymeric methylsilsesquioxane (MSQ). The monomer mixture containing in situ‐formed MSQ was then subjected to emulsification and emulsion polymerization. Transmission electron microscopy (TEM) images showed that the obtained latex particles had a core–shell structure. Differences between the X‐ray photoelectron spectroscopy (XPS) results of the contents of silicon atoms on surfaces of films formed at temperatures above and below glass transition temperatures (T_gs) of polyacrylate evidenced that the cores were made up of MSQ and the shells were made up of polyacrylate. The static water contact angle measurements indicated that the incorporation of MSQ can result in composite latex with higher hydrophobicity. Copyright © 2009 John Wiley & Sons, Ltd.