Volume‐dependent potential approach for tungsten

A scheme to produce density‐of‐states‐(DOS)‐dependent potentials for d‐metals on the basis of the local density approximation calculations is suggested. As an example this scheme is applied to construct a DOS‐dependent potential for tungsten. The second moment of the tungsten DOS is calculated. We show that the obtained potentials give a good agreement of cohesive properties with the experimental data. ©1999 John Wiley & Sons, Inc. Int J Quant Chem 71: 343–348, 1999     

Anionic alternating copolymerization of 3,4‐dihydrocoumarin and glycidyl ethers: A new approach to polyester synthesis

Anionic copolymerizations of 3,4‐dihydrocoumarin (DHCM) and a series of glycidyl ethers (n‐butyl glycidyl ether, tert‐butyl glycidyl ether, and allyl glycidyl ether) with 2‐ethyl‐4‐methylimidazole as an initiator proceeded in a 1:1 alternating manner to give the corresponding polyesters, whose structures were confirmed by spectroscopic analyses and reductive scission of the ester bonds in the main chain with lithium aluminum hydride, followed by detailed analyses of the resulting fragments. The polyester obtained by the copolymerization of DHCM and allyl glycidyl ether inherited the allyl groups in the side chain, whose applicability to chemical modifications of the polyester was successfully demonstrated by a platinum‐catalyzed hydrosilylation reaction. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 4092–4102, 2008     

Density of states of alternant cyclic polyenes (CH)N by a direct Lanczos method

A direct full configuration interaction approach, previously used for studying individual low-lying eigenvalues, is combined with iterative Lanczos calculations, in order to obtain global properties of large Hermitean Hamiltonian matrices. To this effect systematic generation of random start vectors is used to compute statistical approximations to the density of states (DOS). Applications for cyclic polyenes in order to illustrate the viability of the scheme modeled by correlated, high-binding Pariser-Parr-Pople (PPP) Hamiltonians of increasing complexity are presented. The degree of correlation in the solutions is controlled by the parameter β. Convergence properties of the DOS for N = 10 and N = 14 are studied varying the extent of correlation. © 1997 John Wiley & Sons, Inc. Int J Quant Chem 63: 719–728, 1997     

Catalyst‐Dependent Selectivity in the Relay Catalytic Branching Cascade

The synthesis of small organic molecules as probes for discovering new therapeutic agents has been an important aspect of chemical biology. One of the best ways to access collections of small molecules is to use various techniques in diversity‐oriented synthesis (DOS). Recently, a new form of DOS, namely “relay catalytic branching cascades” (RCBCs), has been introduced, wherein a common type of starting material reacts with several scaffold‐building agents (SBAs) to obtain structurally diverse molecular scaffolds under the influence of catalysts. Herein, the RCBC reaction of a common type of substrate with SBAs is reported to give two different types of molecular scaffolds and their formation is essentially dependent on the type of catalyst used.     

Real‐time FTIR monitoring of the mechanism of initiation of isobutylene polymerizations by epoxide/Lewis acid systems

Real‐time Fourier Transformation Infrared (FTIR) spectroscopy with a fiber optic transmission probe (TR) was used to monitor the polymerization of isobutylene (IB) initiated by α‐methylstyrene epoxide (MSE) and 1,2‐epoxi‐2,4,4‐trimethylpentane (TMPO‐1) in conjunction with TiCl₄ and BCl_3. In the presence of an equimolar amount of BCl₃, MSE and TMPO‐1 underwent ring opening via S_N1 mechanism. In contrast to TiCl₄‐coinitiated reactions, no oligoether formation via S_N2 mechanism was observed. TMPO‐1 with excess BCl₃ initiated IB polymerization, yielding a telechelic PIB carrying α‐primary OH and ω‐tertiary Cl functionalities with 70% initiator efficiency. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 3611–3618, 2008     

Synthesis and properties of helical poly(phenylacetylene) derivatives. Effect of chirality combination on the helicity

Novel 4‐ethynylphthaloyl amino acid esters carrying different terminal groups, 4‐ethynylphthaloyl glycine (1S,2R,5S)‐menthyl ester ( 1 ), 4‐ethynylphthaloyl glycine (1R,2S,5R)‐menthyl ester ( 2 ), 4‐ethynylphthaloyl L ‐leucine methyl ester ( 3 ), 4‐ethynylphthaloyl L ‐leucine (1S,2R,5S)‐menthyl ester ( 4 ), 4‐ethynylphthaloyl L ‐leucine (1R,2S,5R)‐menthyl ester ( 5 ) were synthesized and polymerized with a rhodium catalyst. Polymers with high molecular weights were obtained in 71–92% yields. The helical conformation of the polymers could be tuned by the chirality of the amino acid connected to the backbone, together with the chirality and bulkiness of the terminal pendent groups. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 4183–4192, 2008     

A planning strategy for diversity-oriented synthesis

In contrast to target-oriented synthesis (TOS) and medicinal or combinatorial chemistry, which aim to access precise or dense regions of chemistry space, diversity-oriented synthesis (DOS) populates chemical space broadly with small-molecules having diverse structures. The goals of DOS include the development of pathways leading to the efficient (three- to five-step) synthesis of collections of small molecules having skeletal and stereochemical diversity with defined coordinates in chemical space. Ideally, these pathways also yield compounds having the potential to attach appendages site- and stereoselectively to a variety of attachment sites during a post-screening, maturation stage. The diverse skeletons and stereochemistries ensure that the appendages can be positioned in multiple orientations about the surface of the molecules. TOS as well as medicinal and combinatorial chemistries have been advanced by the development of retrosynthetic analysis. Although the distinct goals of DOS do not permit the application of retrosynthetic concepts and thinking, these foundations are being built on, by using parallel logic, to develop a complementary procedure known as forward-synthetic analysis. This analysis facilitates synthetic planning, communication, and teaching in this evolving discipline.     

Styrene polymerization catalyzed by metal porphyrin complex/MAO for in situ synthesizing polystyrene containing air stable π cation radicals

A novel catalyst system based on nickel(II) tetraphenylporphyrin (Ni(II)TPP) and methylaluminoxane for styrene polymerization was developed. This catalyst system has a high thermal stability and show fairly good activity. The obtained polystyrene (PS) was isotactic‐rich atactic polymer by ¹³C NMR analysis, and its molecular weight distribution was rather narrow (M_w/M_n ≈ 1.6, by GPC analysis). ESR revealed that Ni(II)TPP π cation radicals were formed in the polymerization and could remain in the resulting PS stably. The mechanism of the polymerization was discussed and a special coordination mechanism was proposed. The PS product containing Ni(II)TPP π cation radicals can be used as a potential functional material. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 1240–1248, 2008     

Semiempirical calculations of TiO2 (rutile) clusters

The densities of states for small (TiO₂)_x-clusters, x = 1, 3, 6, 9, and 14, have been calculated by means of the INDO method. The shape of the valence bands' density of states (DOS ) are discussed in terms of the distribution of coordination numbers. A one-slab cluster with uniform distribution of the coordination numbers was used to compare our calculations with experimental spectra. The photoelectric DOS and DOS for a cluster with an oxygen vacancy are in very good agreement with experimental findings for the TiO₂ (001) surface. O1s core level shifts between a surfacelike and a bulklike oxygen atom have been estimated. It is concluded that the observed surface–bulk shift for the TiO₂ (001) surface contains a substantial relaxation contribution. © 1992 John Wiley & Sons, Inc.     

Copolymerization of ethylene with cycloolefins by titanium complexes containing tridentate [o−NSR] ligands

A family of titanium complexes of the general formula [N‐(3,5‐di‐tert‐butylsalicylidene)‐2‐alkylsulfanylanilinato]Ti(IV)Cl₃ 5a – f was prepared from the reaction of TiCl₄ with the potassium salts of the corresponding ligands. These complexes were fully characterized by various spectroscopic techniques and elemental analyses. The molecular structures of 5b and 5e were further confirmed by single‐crystal X‐ray analyses. Complexes 5a – f (except for 5c ) exhibited good to high catalytic activities in ethylene copolymerization with cycloolefins such as norbornene, cyclopentene, dicyclopentadiene in the presence of modified methylaluminoxane. The reaction conditions and the steric hindrance of the alkyl substituents on sulfur atom in the precatalysts influenced strongly the copolymerization behaviors and the structures of the resultant copolymers. Complex 5c with bulky tert‐butylthio sidearm showed both low catalytic activity and comonomer incorporation ratio. The n‐alkylthio complexes 5a , 5d – f all exhibited good ethylene copolymerization capabilities with cycloolefins, which is superior to the corresponding phenylthio complex 5g . © 2008 Wiley Periodicals, Inc. JPolym Sci Part A: Polym Chem 46: 2807–2819, 2008     

New PVK‐based nonlinear optical polymers: Enhanced nonlinearity and improved transparency

A series of poly(vinylcarbazole)‐based polymers containing sulfonyl‐based nonlinear optical chromophores as the side chains were prepared conveniently through a postfunctionalization approach. In the polymers, the subtle structure of the chromophore moieties could be easily modified by the introduction of different isolation group, to adjust the property of the resultant polymers. The polymers exhibited good optical transparency, besides their good processability and thermal stability. The poled polymer films exhibited large second harmonic generation (SHG) coefficients of d₃₃ values (up to 28.6 pm/V) with excellent thermal stability (about 90% of the maximal SHG coefficients remain at ～ 110 °C). © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 2983–2993, 2008     

Synthesis of amphiphilic poly(methyl methacrylate‐ b‐ethylene oxide) copolymers from monohydroxy telechelic poly(methyl methacrylate) as macroinitiator

The synthesis of well‐defined poly(methyl methacrylate)‐block‐poly(ethylene oxide) (PMMA‐b‐PEO) dibock copolymer through anionic polymerization using monohydroxy telechelic PMMA as macroinitiator is described. Living anionic polymerization of methyl methacrylate was performed using initiators derived from the adduct of diphenylethylene and a suitable alkyllithium, either of which contains a hydroxyl group protected with tert‐butyldimethylsilyl moiety in tetrahydrofuran (THF) at ?78 °C in the presence of LiClO₄. The synthesized telechelic PMMAs had good control of molecular weight with narrow molecular weight distribution (MWD). The ¹H NMR and MALDI‐TOF MS analysis confirmed quantitative functionalization of chain‐ends. Block copolymerization of ethylene oxide was carried out using the terminal hydroxyl group of PMMA as initiator in the presence of potassium counter ion in THF at 35 °C. The PMMA‐b‐PEO diblock copolymers had moderate control of molecular weight with narrow MWD. The ¹H NMR results confirm the absence of trans‐esterification reaction of propagating PEO anions onto the ester pendants of PMMA. The micellation behavior of PMMA‐b‐PEO diblock copolymer was examined in water using ¹H NMR and dynamic light scattering. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 2132–2144, 2008     

Synthesis and properties of porous polyvinylamine microspheres from acrylonitrile

A novel route to synthesize crosslinked porous polyvinylamine (PVAm) microspheres from acrylonitrile (AN) was developed. In the first step, crosslinked porous polyacrylonitrile (PAN) spheres were prepared by copolymerization of AN and divinylbenzene (DVB). Then they were hydrolyzed to form polyacrylamide (PAM) spheres. And lastly, the porous PVAm spheres were successfully obtained via Hofmann degradation of PAM spheres. Scanning electron microscope (SEM) indicated that these PVAm microspheres have rough surfaces and porous interior structure. The pore size, the amino content, and the content of equilibrium water were also investigated. The pore size of these PVAm microspheres increased with the hydrolytic process. The contents of equilibrium water was changed from 49.6 to 96.5% depending on the different crosslinking degrees, and the amino contents were varied between 9.60 and 15.30 mmol/g depending on the different molar ratio of n(NaClO)/n(NaOH). © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 1674–1682, 2008     

A novel stereoselective synthesis of (2Z)‐2‐arylsulfanylallylic alcohols by tin–lithium exchange of (E)‐α‐stannylvinyl sulfides

Tin–lithium exchange reaction of (E)‐α‐stannylvinyl sulfides 1 with n‐butyllithium gave (Z)‐α‐arylsulfanylvinyllithiums 2 , which reacted with aldehydes or ketones 3 to afford stereoselectively (2Z)‐2‐arylsulfanylallylic alcohols 4 in good to high yields. © 2008 Wiley Periodicals, Inc. Heteroatom Chem 19:639–643, 2008; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/hc.20487     

Kaolin: A recyclable catalyst for the synthesis of 1,5‐benzodiazepines

2,3‐Dihydro‐1H‐1,5‐benzodiazepines are synthesized by the condensation of o‐phenylenediamine and various ketones in the presence of kaolin as a recyclable catalyst in dichloroethane. © 2008 Wiley Periodicals, Inc. Heteroatom Chem 19:215–217, 2008; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/hc.20354     

Palladium‐mediated polymerization of cyclic diazoketones

Palladium‐mediated polymerization of cyclic diazoketones was investigated. Although cyclic diazoketones 1a,b derived from cyclohexanone and 1‐tetralone did not homopolymerize, they can be used as a comonomer for copolymerization with polymerizable acyclic diazoketones. On the other hand, an α,β‐unsaturated cyclic diazoketone 2a prepared from 2‐cyclohexen‐1‐one polymerized to give a polymer poly 2a ′ with M_n = 1400 in a 23.8% yield. Addition of some nucleophiles to C?C bond in poly 2a ′ was carried out. Copolymerization of 2a and its dimethyl‐substituted analogues 2b,c with acyclic diazoketones was also investigated. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 1638–1648, 2008     

Synthesis of hetero‐telechelic polymers by self‐polyaddition of monomers containing both oxetanyl and carboxyl groups

The synthesis and self‐polyaddition of new monomers, o‐, m‐, and p‐[(3‐ethyloxetane‐3‐yl)methoxyethyl]benzoic acid (o‐EOMB, m‐EOMB, and p‐EOMB) containing both oxetanyl groups and carboxyl groups were examined. The reactions of o‐EOMB, m‐EOMB, and p‐EOMB in the presence of tetraphenylphosphonium bromide as a catalyst in o‐dichlorobenzene at 150–170 °C resulted in self‐polyaddition to give the corresponding hetero‐telechelic polymers poly(o‐EOMB), poly(m‐EOMB), and poly(p‐EOMB) with M_ns = 14,500–33,400 in satisfactory yields. The M_n of poly(o‐EOMB) decreased at higher reaction temperatures than 150 °C, unlike those of poly(m‐EOMB) and poly(p‐EOMB), possibly due to inter‐ or intraester exchange side reactions. It was also found that the thermal properties and solubilities of these polymers were supposed with the proposed structures. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 7835–7842, 2008     

MnCl2‐Promoted synthesis of quinoxaline derivatives at room temperature

MnCl₂ efficiently catalyzes the condensation of o‐phenylenediamine derivatives with 1,2‐diketones at room temperature to afford the corresponding quinoxaline derivatives in high yields. © 2008 Wiley Periodicals, Inc. Heteroatom Chem 19:218–220, 2008; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/hc.20401     

“Click” chemistry for in situ formation of thermoresponsive P(NIPAAm‐co‐HEMA)‐based hydrogels

The strategy for in situ chemical gelation of poly(N‐isopropylacrylamide‐co‐hydroxylethyl methacrylate) [P(NIPAAm‐co‐HEMA)]‐based polymers was demonstrated. Two types of new P(NIPAAm‐co‐HEMA) derivatives with alkyne and azide pendant groups, respectively, were prepared. When the solutions of the two derivatives were mixed together, a crosslinking reaction, a type of Huisgen's 1,3‐dipolar azide‐alkyne cycloaddition, in the presence of Cu(I) catalyst occurs. The morphology, equilibrium swelling ratio, swelling kinetics, and temperature response kinetics of the in situ gelated hydrogels were studied. In comparison with the conventional PNIPAAm hydrogel, because of the spatial hindrance of polymeric chains, the resulted hydrogels had a macroporous structure as well as a fast shrinking rate. The strategy described here presents a potential alternative to the traditional synthesis techniques for the in situ formation of thermoresponsive hydrogels. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 5263–5277, 2008     

A convenient and practical method for the synthesis of N‐thiophosphoryl aldimines and ketimines

A convenient and practical method for the preparation of N‐thiophosphoryl imines was developed through the thermal condensation of acetals with different thiophosphoramides at 120–160°C. © 2008 Wiley Periodicals, Inc. Heteroatom Chem 19:238–244, 2008; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/hc.20412