Novel,highly efficient polymeric benzophenone photoinitiator containing coinitiator moieties for photopolymerization

A novel polymeric photoinitiator P(MPBP‐co‐DMAEMA), bearing side‐chain benzophenone (BP) and coinitiator amine, was synthesized through free radical copolymerization of a polymerizable photoinitiator, 4‐[(4‐maleimido)phenoxy]benzophenone (MPBP), and a polymerizable coinitiator amine, N, N‐dimethylaminoethyl methacrylate (DMAEMA). In order to find out the influences of coinitiator amine on photopolymerization, a polymeric coinitiator amine, P(DMAEMA), was also synthesized for comparison. FT‐IR, ¹H NMR, and GPC analyses confirm the structures of polymers. The UV‐Vis spectra of polymeric photoinitiator P(MPBP‐co‐DMAEMA) and polymerizable photoinitiator MPBP are similar, and both exhibit high red‐shifted maximal absorption as compared with BP. The photopolymerization of 1,6‐hexanediol diacrylate (HDDA) and trimethylolpropane triacrylate (TMPTA), initiated by MPBP/DMAEMA, MPBP/P(DMAEMA), and P(MPBP‐co‐DMAEMA) systems, was studied by photo‐DSC. The results indicate that P(MPBP‐co‐DMAEMA) is most efficient for the polymerization of both HDDA and TMPTA, and MPBP/P(DMAEMA) is the least efficient of the three photoinitiating systems. Copyright © 2009 John Wiley & Sons, Ltd.     

Novel polymeric,thio‐containing photoinitiator comprising in‐chain benzophenone and an amine coinitiator for photopolymerization

A novel thio‐containing diamine with a benzophenone structure, 4‐amino‐4′‐[4‐aminothiophenyl]benzophenone (AATBP), was synthesized. Two kinds of polymeric photoinitiators, PUPIA and PUPI, were synthesized through the polycondensation of toluene‐2,4‐diisocyanate with AATBP and/or N‐methyldiethanolamine (MDEA). A macroamine, PUPA, was also synthesized for comparison. Fourier transform infrared, ¹H NMR, and gel permeation chromatography analyses confirmed the structures of all the polymers. The ultraviolet–visible spectra of PUPIA, PUPI, and AATBP were similar, and all exhibited the maximal absorption above 325 nm. The photopolymerization of two monomers with different functionalities, poly(propylene glycol)diacrylate and trimethylolpropane triacrylate initiated by PUPIA, PUPI/MDEA, PUPI/PUPA, AATBP/MDEA, and AATBP/PUPA, was studied through differential scanning photocalorimetry. The results showed that both PUPIA and PUPI/MDEA had high photoefficiency, and their low‐molecular‐weight counterparts could hardly initiate the photopolymerization. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 576–587, 2007     

Novel polymeric photoinitiators comprising of side-chain benzophenone and coinitiator amine: Photochemical and photopolymerization behaviors

Three kinds of macrophotoinitiators, PBP-P, PBP-E and PBP-B, were synthesized by step-polymerization of benzophenone and different coinitiator amino monomers. The low molecular weight analogue, 2,4-di(3-(diethyl amino)-2-hydroxypropoxy)-benzophenone (DAHBP), was also synthesized as a low molecular weight model compound. The UV-vis spectra of PBP-P, PBP-E, PBP-B and DAHBP are similar with large red-shifted maximum absorption comparing with BP. ESR spectra of PBP-P and DAHBP possess the same initiation mechanism with DEBP/TEA systems. The photopolymerization of two monomers with different functionality poly(propylene glycol)diacrylate (PPGDA) and trimethylolpropane triacrylate (TMPTA), initiated by macrophotoinitiators and low molecular weight analogs, was studied through photo-DSC. The results show that different efficiency of photoinitiators towards monomers: first, polymeric photoinitiators are more efficient than low molecular weight analogs; then PBP-E is the most efficient for PPGDA; lastly, PBP-B is the most efficient for TMPTA. The efficiency of the photopolymerization is mainly affected by structure of amine in macrophotoinitiator.     

Synthesis and photoinitiating behavior of hyperbranched polymeric photoinitiators bearing coinitiator amine

A series of benzophenone (BP)‐terminated hyperbranched polyester (BoltornTM P1000), bearing amine moieties as synergists by reacting with piperidine, were synthesized as yellowish liquids with low viscosity, and used as polymeric photoinitiators (HPPIs). For comparison, acrylate groups were introduced to the terminals of hyperbranched polyester for obtaining a polymerizable photoinitiator. The chemical structures were characterized by FTIR and ¹H NMR spectroscopy. HPPIs and BP exhibited the similar absorptions by UV–vis spectroscopy. The photoinitiating behavior of HPPIs with trimethylolpropane triacrylate (TMPTA) as a trifunctional monomer was investigated by using photo‐DSC analysis. The results indicated that the maximum photopolymerization rate and unsaturation conversion of TMPTA initiated by HPPIs were both lower than that by BP. Among them, the HPPI with double tertiary amine moiety of BP moiety was found to be the most efficient photoinitiator. Additionally, the films cured with bisphenol A epoxy acrylate EB605 initiated by HPPIs were uniform and possessed high T_g from DMTA. Copyright © 2010 John Wiley & Sons, Ltd.     

Synthesis of main chain polymeric benzophenone photoinitiator via thiol‐ene click chemistry and Its use in free radical polymerization

Main chain polymeric benzophenone photoinitiator (PBP) was synthesized by using “Thiol‐ene Click Chemistry” and characterized with ¹H NMR, FTIR, UV, and phosphorescence spectroscopies. PBP as a polymeric photoinitiator presented excellent absorption properties (ε₂₉₄ = 28,300 mol^?1L^?1cm^?1) compared to the molecular initiator BP (ε₂₅₂ = 16,600 mol^?1L^?1cm^?1). The triplet energy of PBP was obtained from the phosphorescence measurement in 2‐methyl tetrahydrofurane at 77 K as 298.3 kJ/mol and according to phosphorescence lifetime, the lowest triplet state of PBP has an n‐π* nature. Triplet–triplet absorption spectrum of PBP at 550 nm following laser excitation (355 nm) were recorded and triplet lifetime of PBP was found as 250 ns. The photoinitiation efficiency of PBP was determined for the polymerization of Hexanedioldiacrylate (HDDA) with PBP and BP in the presence of a coinitiator namely, N‐methyldiethanolamine (MDEA) by Photo‐DSC. The initiation efficiency of PBP for polymerization of HDDA is much higher than for the formulation consisting of BP. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Amphiphilic polymeric Michler's ketone (MK) photoinitiators (APMKs) containing PEO chain and coinitiator amine

A series of amphiphilic polymeric Michler's ketone (MK) photoinitiators (APMKs) were synthesized by incorporating PEO short chain, MK moiety, and coinitiator amine into the same polymeric chain. APMKs possess good amphiphilic ability and become water‐soluble when the molar ratio of MK(pipaz)₂/PEO/piperazine is 2:3:1. UV–Vis measurement shows that APMKs possess the same characteristic absorption to MK derivatives. The photopolymerization of three monomers with different functionality and hydrophilicity, polyethylene glycol diacrylate (PEGDA), phenoxy ethyl acrylate (AMP‐10G), and 2,2‐bis[4‐(acryloxypolyethoxy)phenyl]propane (A‐BPE‐10) initiated by APMKs was investigated by photodifferential scanning (photo‐DSC). The results show that APMKs can photoinitiate the polymerization of hydrophilic and hydrophobic monomers efficiently. As for photopolymerization of water‐soluble PEGDA, the final conversion is higher than 94%. Therefore, APMKs will be expected to find potential in many fields. Copyright © 2009 John Wiley & Sons, Ltd.     

One‐component photoinitiator based on benzophenone and sesamol

A new benzodioxole derivative, 4‐(1,3‐benzodioxol‐5‐yloxy) benzophenone (BPBDO), based on benzophenone and sesamol was precisely synthesized, and it can be used as a 1‐component type II photoinitiator. Elementary analysis, atmospheric pressure chemical ionization mass spectrometry, ¹H nuclear magnetic resonance, and ¹³C nuclear magnetic resonance studies revealed that the molecular structure of BPBDO consisted of both benzophenone (BP) and benzodioxole (BDO) structures. The laser flash photolysis experiments and electron spin resonance test indicated that the process of radicals generated from BPBDO after irradiation was similar to 3 processes of ethyl 4‐dimethylaminobenzoate and BP. The kinetics of photopolymerization of the photoinitiator was also studied by real‐time infrared spectroscopy. The oxygen content, light intensity, and viscosity of the monomer affected the decomposition (R_d) and polymerization rate, and the final double bond conversion was also studied. All the results suggest that BPBDO is a 1‐component photoinitiator that is an efficient photoinitiator for free radical polymerization. In contrast to typical dual‐component photoinitiators, eg, BP/ethyl 4‐dimethylaminobenzoate or BP/BDO, BPBDO does not require an additional amine coinitiator for the initiation and is applicable in nonamine resin systems.     

Highly efficient,polymerizable, sulfur‐containing photoinitiator comprising a structure of planar N‐phenylmaleimide and benzophenone for photopolymerization

In a continuation of research on chemically bonded photoinitiators comprising a structure of planar N‐phenylmaleimide (NPMI) and benzophenone (BP), a novel, highly efficient, polymerizable, sulfur‐containing photoinitiator, 4‐[(4‐maleimido)thiophenyl]benzophenone (MTPBP), was synthesized by the introduction of an NPMI group into BP. Another chemically bonded photoinitiator, 4‐[(4‐maleimido)phenoxy]benzophenone (MPBP), was selected to evaluate its photoefficiency. The results showed that MTPBP possessed a greatly redshifted UV maximal absorption and a very weak fluorescence emission. Electron spin resonance spectra indicated that the C? S bond in its molecule underwent photolysis reactions to generate radicals to initiate the polymerization. Three representative types of different functionality monomers—methyl methacrylate, 1,6‐hexanediol diacrylate, and trimethylolpropane triacrylate—were chosen to be initiated through dilatometry and differential scanning photocalorimetry with unsaturated tertiary amine N,N‐dimethylaminoethyl methacrylate as the coinitiator. The results showed surprisingly high efficiency of MTPBP due to the mutual influence between NPMI and BP as in their physical mixtures and photolysis reactions at the C? S bond. Both MPBP and MTPBP behaved with similar regularity toward different monomers. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 3738–3750, 2006     

Synthesis and photopolymerization kinetics of benzophenone piperazine one‐component initiator

A one‐component type II photoinitiator (PDBP), based on 4‐hydroxybenzophenone (HBP), acryloyl chloride, and piperazine, was synthesized and its structure was confirmed by ¹H‐NMR. The photopolymerization kinetics of the photoinitiator was studied by real‐time Infrared spectroscopy (FT‐IR). It indicated that PDBP was a more effective photoinitiator than that of BP/triethylamine (TEA). The rate of polymerization, final conversion increased and the induction period shortened with increase in PDBP concentration, light intensity, and amine concentration. The kinetics of photopolymerization for TPGDA incorporating PDBP in the presence of different tertiary amines as the initiating system indicated that the PDBP/TEA combination exhibited the highest polymerization rates among the PDBP/amine combinations. Copyright © 2007 John Wiley & Sons, Ltd.     

Radical polymeric photoinitiators bearing side‐chain camphorquinone moieties linked to the main chain through a flexible spacer

New polymeric photoinitiators bearing the side‐chain camphorquinone moiety spaced from the backbone by a long and flexible connection have been prepared and tested in the photocuring of acrylic monomers upon irradation with visible light in the presence of tertiary amine coinitiator. The results indicate that the photoinitiating activity of the polymeric initiators may be comparable to the related combination of low molecular weight derivatives when the camphorquinone component has a polymeric structure, and depends on the chemical structure of both the components of the initiator/coinitiator pair. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 5879–5888, 2005     

Synthesis and characterization of copolymerizable one‐component type II photoinitiator

A copolymerizable one‐component Type II photoinitiator (CMEBP), based on 4‐hydroxybenzophenone (HBP), epichlorohydrin, morpholine, and acryloyl chloride, was synthesized and its structure was confirmed by ¹H‐NMR. The properties of CMEBP were investigated with UV spectroscopy and photo‐differential scanning calorimetry (photo‐DSC). The maximum of UV absorption red‐shifted significantly compared to benzophenone (BP). Photopolymerization results of tripropylene glycol diacrylate (TPGDA) indicated that CMEBP had larger maximum rate of polymerization than that of BP/triethanolamine (TEOHA) and HBP/triethylamine (TEA), larger final double bond conversion than that of HBP/TEA, but lower than that of BP/TEOHA. The rate of polymerization, final conversion increased and the induction period shortened with increase in CMEBP concentration. Copyright © 2008 John Wiley & Sons, Ltd.     

Naphthodioxinone‐1,3‐benzodioxole as photochemically masked one‐component type II photoinitiator for free radical polymerization

A 1,3‐benzodioxole derivative of naphthodioxinone, namely 2‐(benzo[d][1,3]dioxol‐5‐yl)‐9‐hydroxy‐2‐phenyl‐4H‐naphtho[2,3‐d][1,3]dioxin‐4‐one was synthesized and characterized. Its capability to act as caged one‐component Type II photoinitiator for free radical polymerization was examined. Upon irradiation, this photoinitiator releases 5‐benzoyl‐1,3‐benzodioxole possessing both benzophenone and 1,3‐dioxole groups in the structure as light absorbing and hydrogen donating sites, respectively. Subsequent photoexcitation of the benzophenone chromophore followed by hydrogen abstraction generates radicals capable of initiating free radical polymerization of appropriate monomers. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Effect of coinitiator type on initiation efficiency of two‐component photoinitiator systems based on Eosin

Effect of coinitiator structure on relative initiation efficiency of two‐component Eosin/coinitiator systems has been evaluated quantitatively in polymerization of poly(ethylene glycol) diacrylate as an example monomer. The initiation efficiency has been measured by the Fluorescence Probe Technique (FPT), using Eosin both as a photoinitiator component and as a fluorescent probe. A LED/fiber optic‐based measurement system has been developed and applied in this study. It has been found that from among 17 compounds tested, the following coinitiators form most efficient photoinitiating systems in combination with Eosin, when exposed to visible light: coinitiator, relative efficiency = triethanolamine, 1.0; 2,6‐diisopropyl‐N,N‐dimethylaniline, 0.70; 2‐benzyl‐2‐(dimethylamino)‐4′‐morpholinobutyrophenone (Irgacure 369), 0.91; carbon tetrabromide, 2.1; [4‐[(2‐hydroxytetradecyl)oxy]phenyl]phenyliodonium hexafluoroantimonate (SarCat 1012), 28. These relative efficiencies refer to the following component concentrations: [Eosin] = 8.6 × 10^?4 M, (0.05% by weight); [coinitiator] = 4.3 × 10^?2 M. The factors affecting the initiation efficiency of the systems studied are discussed. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 3519–3532, 2008     

A benzophenone‐naphthalimide derivative as versatile photoinitiator of polymerization under near UV and visible lights

A benzophenone‐naphthalimide derivative (BPND) bearing tertiary amine groups has been developed as a high‐performance photoinitiator in combination with 2,4,6‐tris(trichloromethyl)‐1,3,5‐triazine or an iodonium salt for both the free radical polymerization (FRP) of acrylates and the cationic polymerization (CP) of epoxides upon exposure to near UV and visible LEDs (385–470 nm). BPND can even produce radicals without any added hydrogen donor. The photochemical mechanisms are studied by molecular orbital calculations, steady state photolysis, electron spin resonance spin trapping, fluorescence, cyclic voltammetry and laser flash photolysis techniques. These novel BPND based photoinitiating systems exhibit an efficiency higher than that of the well‐known camphorquinone‐based systems (FRP and CP) or comparable to that of bis(2,4,6‐trimethylbenzoyl)‐phenylphosphineoxide (FRP at λ ≤ 455 nm). © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 445–451     

Photoinitiating behavior of benzophenone derivatives covalently bonded tertiary amine group for UV‐curing acrylate systems

A series of benzophenone derivatives (N‐BPs) containing tertiary amine group used as hydrogen abstraction‐type (type II) photoinitiators were synthesized through the addition reaction of secondary amines with 4‐(2,3‐epoxypropyloxy) benzophenone. The chemical structures were characterized with ¹H NMR, FTIR spectroscopy, and UV spectrum measurements. The N‐BPs showed the higher absorption in 300–400 nm than benzophenone (BP). The photoinitiating activity was examined based on the photopolymerization of 1,6‐hexanediol diacrylate using photo‐DSC method. The results showed that the photoinitiating efficiency was negatively affected by the molecular structure of alkyl group connected to the tertiary amine with the order of isopropyl (N‐BPI) < methyl (N‐BPM) < ethyl (N‐BPE) < propyl (N‐BPP). Moreover, the diethanolamine‐modified benzophenone derivative (N‐BPOH) had the highest‐photoinitiating efficiency for free radical polymerization systems among the N‐BPs. Copyright © 2011 John Wiley & Sons, Ltd.     

Iodonium sulfonates as high‐performance coinitiators and additives for CQ‐based systems: Toward aromatic amine‐free photoinitiating systems

Iodonium sulfonates are proposed here as a new class of high‐performance coinitiators for camphorquinone (CQ)‐based systems for the polymerization of methacrylates under blue light irradiation. When combined with CQ, the new proposed coinitiators present excellent polymerization performances and are excellent candidates for the replacement of tertiary aromatic amines subjected to toxicological concerns in the well‐established CQ/amine photoinitiating system (PIS). Remarkably, good bleaching properties are obtained after polymerization. The use of the new PIS for dental adhesives is also investigated. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019, 57, 1664–1669     

Synthesis of photoactive single‐chain folded polymeric nanoparticles via combination of radical polymerization techniques and Menschutkin click chemistry

This contribution reports that synthesis of polystyrene based photoactive polymeric nanoparticles by radical copolymerization and Menschutkin Chemistry methodology. In the first step, poly(styrene‐co‐chloromethyl styrene) was achieved by thermally initiated radical copolymerizations and subsequently copolymers were reacted to commercially available Type II photoiniator (Michler's ketone) in dilute condition in order to achieve intramolecular crosslinked polymeric nanoparticles. After the characterization studies, polymeric nanoparticles were used for free radical photopolymerization of methacrylic formulations to determine the initiation efficiency. Upon UV irradiation, resulting polymeric nanoparticle lost its globular structure by releasing benzophenone part and transformed into linear copolymer analogue. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 1998–2003     

Synthesis and characterization of multiarm (Benzoin-PS)m-polyDVB star polymer as a polymeric photoinitiator for polymerization of acrylates and methacrylates

In this study, a new benzoin-based multi-arm star polymer was synthesized by using ATRP, and characterization was achieved by spectrophotometric and chromatographic methods. Obtained multiarm (Benzoin-PS)_m-polyDVB star polymer was employed as a polymeric photoinitiator for polymerization of methacrylates and acrylates. Photophysical properties of this initiator were determined by fluorescence and phosphorescence measurements, the phosphorescence lifetime was calculated as 29 ms hence the lowest triplet state nature was n-π* character, and laser flash photolysis technique was additionally used to get more information about triplet state and triplet lifetime which was calculated as 1.34 ms. Photokinetics of difunctional acrylate such as HDDA was studied with a multi-arm (Benzoin-PS)_m-polyDVB star polymeric initiator using Photo-DSC.     

Monitoring photopolymerization reactions through thermal imaging: A unique tool for the real‐time follow‐up of thick samples, 3D printing,and composites

The ever increasing applications of photopolymers from historical thin (<50 µm) coatings to very deep samples (>1 cm) require the development of robust 4D monitoring strategies able to assess photopolymerization efficiencies (first dimension) as a function of time (second dimension) and position (third and fourth dimensions). Therefore, here, we demonstrated that thermal imaging is a valuable photopolymerization monitoring device showing: (a) very high response times (<1 s); (b) high repeatability of the measurement; (c) strong adaptability of the setup to various conditions (e.g., onto irregular surfaces or inside a real time Fourier transformed infrared spectrometer (RT‐FTIR)); (d) extremely deep photopolymerization follow‐ups (and subsequent rationalization) with good resolution in time and in space (real‐time thermal imaging microscopy experiments); (e) adaptability to applied materials. This monitoring strategy was found particularly robust when taking into account all the heat generating phenomena (i.e., direct heating from the lamp vs. temperature raised due to monomer conversion). As a result, we propose thermal imaging as the next reference monitoring system for the new ranges of thick and/or filled samples (e.g., 3D objects, composites) and/or applied photopolymerizations (e.g., 3D printing) more and more present in the literature. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 889–899     

High‐throughput kinetic analysis of acrylate and thiol‐ene photopolymerization using temperature and exposure time gradients

In this work, a high‐throughput technique for evaluating photopolymers is developed to enable simultaneous measurement of the effects of temperature in combination with exposure time. Temperature and exposure time gradients were produced in orthogonal directions on a single sample, and subsequently sampled using Fourier transform infrared (FTIR) spectroscopy. The technique developed here allows for photopolymerization kinetics to be analyzed rapidly over a large range of industrially relevant temperatures, giving insight into the role temperature and the polymer's glass transition temperature have in dictating the photopolymerization kinetics. In the 70/30 wt % hexyl acrylate and hexanediol diacrylate system, conversion in samples below the glass transition temperature (T_G) was 66 ± 2% after 12 s, significantly lower than the 93 ± 4% conversion at 12 s for samples polymerized at temperatures above the T_G. In addition, a thiol‐ene system was analyzed to study the effect of temperature on the ene homopolymerization in allyl ether monomers, which leads to incomplete thiol conversion in stoichiometrically balanced systems. At a 60% thiol conversion, the allyl ether‐ene conversion at all temperatures is 65 ± 3% irrespective of initial formulation temperature, indicative of the homopolymerization behavior being nearly independent of temperature. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 1502–1509, 2008