On the structure of CO adlayers on Cu(100) and Cu(111)

Alternative models for the high coverage compressed overlayers of CO on copper (100) and (111) are proposed in which the LEED patterns previously attributed to out-of-registry, uniformly compressed structures are re-interpreted in terms of adsorption on linear and bridged sites. The models provide a simpler explanation for the small influence of compression on the frequency of the infrared adsorption bond near 2000 cm^?1 compared with the large change of surface potential.     

Azimuthal orientation of formate and acetate on Cu(100) studied by angle-scanned photoelectron diffraction

Surface formate and acetate species obtained by the reaction of formic and acetic acid with preadsorbed oxygen on Cu(100) have been studied by angle-scanned photoelectron diffraction. Our results are clearly indicative of molecules oriented with their planes parallel to the (011) and (01̄1) planes of the copper crystal.     

Crystallographic structure of ultrathin Fe films on Cu(100)

We report the observation of bcc-like crystal structures in 2-4 monolayer (ML) Fe films grown on fcc Cu(100) using scanning tunneling microscopy. The local bcc structure provides a straightforward explanation for their frequently reported outstanding magnetic properties, i.e., ferromagnetic ordering in all layers with a Curie temperature above 300 K. The nonpseudomorphic structure, which becomes pseudomorphic above 4 ML film thickness, is unexpected in terms of conventional rules of thin film growth and stresses the importance of finite thickness effects in ferromagnetic ultrathin films.     

Electronic structure of a cobalt monolayer on Cu(100)

Angular resolved photoemission spectra using synchrotron radiation have been measured for different amounts of cobalt evaporated on Cu(100). At room temperature cobalt grows layer-bylayer forming well-ordered layers in registry with the substrate, as judged by AES, LEED and UPS measurements. The energy position and linewidth of the Cu peaks remain unchanged when cobalt is deposited onto the surface, suggesting a rather weak interaction between the d-bands of Co and Cu. The two-dimensional band structure of the monolayer of cobalt has been determined. We have obtained a value for the magnetic exchange splitting of ΔE_exch = 0.80 ± 0.15 eV, which is nearly identical to the bulk value. A shift in the energy positions of the critical points for the monolayer versus bulk of cobalt is interpreted in terms of a narrower 2D density of states in the monolayer as compared to the bulk. A resonant valence-band two-electron satellite has been found. The correlation energy and screening effects of the two d-holes are very similar to the corresponding bulk values, while the decreased intensity of the satellite at resonance compared to the one for Co(0001) suggests that there are more d-states relative to s-states in the monolayer than in a bulk cobalt single crystal, in agreement with recent models of the valence band electronic structure at surfaces.     

Structural studies of formate and methoxy groups on the Cu(100) surface using NEXAFS and SEXAFS

Local chemisorption geometries of formate (HCO₂) and methoxy (CH₃O) groups on Cu(100) were examined by means of surface extended (SEXAFS) and near-edge X-ray absorption fine structure (NEXAFS) measurements above the O K edge. At 300 K the oxygen of the formate group are equivalent and asymmetrically located near the four-fold hollow site yielding two CuO distances between 2.31 and 2.45 Å. These distances are at least 0.3 Å longer than typical CuO distances of surface and bulk compounds due to a Cu-C steric interaction. The CO bonds and the OCO angle of the formate are estimated to be $\text{1.27 ± 0.04}\text{A}\text{?}$ and 127 ± 7°, respectively. At 200 K the methoxy group has a CuO distance of $\text{1.97 ± 0.05}\text{A}\text{?}$ and the CO axis is tilted with respect to the surface normal. The exact chemisorption site of the methoxy goup could not be determined, but the atop site is ruled-out.     

Local atomic structure of ultra-thin Fe films grown on Cu(100)

Ultra-thin epitaxial Fe films grown by thermal deposition on Cu(100) are analyzed by scanning tunneling microscopy. Evidence is presented that the morphological characteristics and magnetic properties are a direct consequence of FCC-to-BCC transitions reminiscent of those occurring in bulk Fe. In contrast to the assumption of a ferromagnetic FCC phase in previous models of the Fe/Cu(100) system, we observe a tightly twinned and strained BCC-like phase termed nanomartensite in films below 5 ML thickness, which encompasses almost the entire film volume of 3 ML films. In addition, the surface of 7–8 ML films reconstructs by forming non-close-packed structures with BCC-like bond angles. The formation of these BCC-like phases is the reason for the expansion of the interlayer spacing observed in these films and correlates perfectly with their ferromagnetic ordering. PACS 68.55.-a; 64.70.-p; 81.30.-t     

The energetics of mercury adsorption on Cu(100)

We have investigated the adsorption of mercury overlayers on Cu(100) by atom beam scattering, low energy electron diffraction and angle resolved photoemission. From our data we have calculated the isosteric heats in the adsorbed Hg layer on Cu(100) and compared these with results obtained for mercury on Fe(100), W(100) and Ni(100). We observe changes in the isosteric heat of adsorption that can be associated with the ordering of a c(2 × 2) Hg overlayer phase and the transition from a c(2 × 2) overlayer to a c(4 × 4) overlayer. The isosteric heat of adsorption is 0.50 ± 0.07 eV/atom (48 ± 7 kJ/mol) at zero coverage and reaches a maximum of 0.73 ± 0.04 eV/atom (70 ± 4 kJ/mol). From a combination of ABS and LEED, the structures of the two equilibrium ordered phases of Hg on Cu(100) have been identified, as well as the structures of several non-equilibrium phases.     

ESR of Cu doped cadmium (II) formate dihydrate

Electron spin resonance (ESR) of Cu²⁺ doped cadmium formate dihydrate single crystal was studied at room temperature. Copper enters the lattice substitutionally and is trapped at two magnetically inequivalent sites. The observed spectra are fitted to a spin-Hamiltonian of rhombic symmetry with the following values of the spin-Hamiltonian parameters, Cu²⁺(I): g_x=2.097±0.002, g_y=2.1166±0.002, g_z=2.2887±0.002 and A_x=(140±2)×10⁻⁴ cm⁻¹, A_y=(151±2)×10⁻⁴ cm⁻¹, A_z=(239±2)×10⁻⁴ cm⁻¹, Cu²⁺(II): g_x=2.0843±0.002, g_y=2.1045±0.002, g_z=2.2742±0.002 and A_x=(141±2)×10⁻⁴ cm⁻¹, A_y=(158±2)×10⁻⁴ cm⁻¹, A_z=(267±2)×10⁻⁴ cm⁻¹. The ground state wave function of the Cu²⁺ ion in this lattice is evaluated. It is found that the ground state is predominantly |x²−y²〉. The g-factor anisotropy is also calculated and compared with the experimental value. With the help of the optical absorption study, the nature of bonding in the complex has been discussed.     

Local probing of adsorbate electronic structure using soft X-ray emission; atomic nitrogen on Ni(100) and Cu(100)

The N 2p partial density of states of p4g-N/Ni(100) and c(2 × 2)-N/Cu(100) overlayers have been studied by soft X-ray emission spectroscopy (SXES) and comparisons with corresponding UV photoelectron spectra are made. Broad states (∼10 eV) are observed due to the hybridisation between the N 2p and the substrate 3d and 4sp bands. For both N/Cu and N/Ni the intensity stretches out to the Fermi level, where a prominent peak for N/Cu is observed. These states close to the Fermi level are interpreted as antibonding 2p-3d hybridised states. The higher occupancy of these states in N/Cu is expected due to the higher binding energy of the 3d band in Cu than in Ni. For a complete interpretation of the SXE spectra, especially for N/Cu where many features are observed, further theoretical studies are required.     

Cu(100)表面CO分子单层膜的原子结构

利用第一性原理研究了覆盖度分别为1.00, 0.50和0.25 ML时CO分子单层膜在Cu(100)表面的吸附系统. 计算表明CO分子对不稳定. 获得了CO分子单层膜在虚拟Cu(100)表面的原子结构, 以及CO分子单层膜在Cu(100)表面吸附系统的原子结构. 当CO分子单层膜在Cu(100)表面的三个吸附位吸附, 覆盖度为1.00 ML时, 顶位和桥位都稳定, 而空心位不稳定; 覆盖度为0.50和0.25 ML时, 三个吸附位都稳定.比较吸附前后CO分子单层膜的原子结构, 可知CO分子和Cu(100)表面的相互作用强于CO分子单层膜之间的相互作用. 关键词： CO分子单层膜 自组装 CASTEP Cu(100)     

Physisorption of metal carbonyls on Cu(100)

Chromium hexacarbonyl (Cr(CO)₆) and cyclopentadienyl rhodium dicarbonyl ((η⁵ − C₅H₅)Rh(CO)₂) were physisorbed on the Cu(100) surface and their molecular orientations were deduced from their reflection-absorption infrared (RAIR) spectra. No thermal decomposition of the compounds was observed. Physisorbed Cr(CO)₆ exhibited a substantial degree of dipole-dipole coupling within the adlayer, which was successfully disrupted by coadsorption in Ar at 23 K. The large absorption coefficient of the T_1u mode and the different boundary conditions of this ultrathin layer on a surface resulted in the observation of the longitudinal optical mode, confirming that the molecule is oriented with one carbonyl group adjacent to the surface. A Lyndane-Sachs-Teller splitting of 75 cm⁻¹ was observed for the T^1u mode. The physisorbed layer of (η⁵ − C₅H₅)Rh(CO)₂ did not exhibit strong dipole-dipole coupling, and was oriented with the C₅H₅ (Cp) ring parallel to the surface.     

Face-dependent bond lengths in molecular chemisorption: the formate species on Cu(111) and Cu(110)

Many previous structural studies of molecular adsorbates on metal surfaces indicate that the local coordination and bonding is closely similar to that in organometallic compounds, implying that the metallic substrate has no significant influence. Here we show that such an influence is detectable for one model system, namely, the formate species, HCOO, adsorbed on the atomically rough and smooth (110) and (111) surfaces of Cu, leading to a statistically significant difference (0.09±0.05 ?) in the Cu-O chemisorption bond length. The effect is reproduced in density functional theory calculations.     

The surface structure of V(100)

The structure of the clean V(100)?(1×1) surface is determined, based on an r-factor comparison of experimental LEED intensity-energy spectra with the results of multiple-scattering model calculations. Minimization of the r-factor with respect to the calculational variables leads to optimum values of the first and second interlayer spacings of $\text{d}{}_1\text{=1.41 ± 0.01}\text{A}\text{?}$ and $\text{d}{}_2\text{=1.53 ±0.01}\text{A}\text{?}$, corresponding respectively to a contraction of 7% and an expansion of 1% with respect to the bulk value of $\text{d}{}_{\mathrm{<mtext>B</mtext>}}\text{=1.5141}\text{A}\text{?}$. Preliminary studies of the adsorption of O₂ and CO confirm that the V(100)?(5×1) structure observed during the process of cleaning the crystal is not characteristic of the clean surface, as suggested recently by Davies and Lambert (Surface Science 107 (1981) 391), but rather is associated with the presence of a significant concentration of oxygen in the surface region.