Advances in fluorination of organic compounds with sulphur tetrafluoride

Sulphur tetrafluoride has been known since 1958 as an efficient fluorinating agent for replacing oxygen atoms in carbonyl groups by fluorines. In the past fifteen years a number of new reactions of sulphur tetrafluoride with carbonyl compounds have been discovered. These include formation of bis(1,1-difluoroalkyl) ethers from alkanecar☐ylic acids, bis(1-fluoroalkyl) ethers from aliphatic aldehydes, and cyclic fluoroethers from difunctional car☐ylic acids and aldehydes. In the reactions with branched aldehydes rearrangements of hydrogen and fluorine atoms and also of the carbon skeleton were observed. Tertiary amides were successfully converted to 1,1-difluoroamines and tertiary formamides to trifluoromethylamines. This last reaction involves simultaneous fluorination of the carbon-oxygen and carbon-hydrogen bonds.Participation of carbocations in the mechanism of fluorination of carbonyl groups has been proved and a revised mechanism proposed. Evidence for a reduction-oxidation mechanism for the replacement of formyl hydrogen by fluorine has also been found.     

New synthesis methods for fluorinated carbon nanofibres and applications

Several new synthesis methods of fluorinated carbon nanofibres, such as controlled fluorination using fluorinating agent (TbF₄ or XeF₂), or assisted fluorination under UV and gamma irradiation, are reviewed and compared with the direct fluorination using undiluted fluorine gas. The results highlight the different fluorination mechanisms for the direct fluorination and the new methods. The other advantage of those alternative fluorination routes is the possibility to provide fine tuning of the fluorination level, i.e. from F/C atomic ratio close to zero, as a functionalization, to the unity (CF₁) according to the required application, electrochemical or tribological. Two applications are described in this paper as a function of the fluorine content: protection against ozonation and use as solid lubricants.     

Electrophilic fluorination with N,N′-difluoro-2,2′-bipyridinium salt and elemental fluorine

N,N′-Difluoro-2,2′-bipyridinium bis(tetrafluoroborate) (MEC-31) was shown to be a highly reactive electrophilic fluorinating agent with the highest effective fluorine content in its class. We have developed the perfect recycled fluorination system with MEC-31 for the lower-cost industrial fluorination and for an environment. MEC-31 can be completely recycled including the counter-anion. We found the fluorination of 2-naphthol in liquid CO₂ with MEC-31 in the presence of catalytic amount of NaOTf proceeded quantitatively without the generation of by-product.

In the fluorination of 1,3-dicarbonyl compounds with elemental fluorine, we found the introduction method of fluorine gas would be very important in order to make a reaction efficient. As fluorination goes on, the quantity of 1,3-dicarbonyl compounds of the starting material is reduced gradually, and therefore the quantity of fluorine must be reduced by the method to control the flow rate or the concentration of fluorine gas diluted with nitrogen, together the fluorination to proceed efficiently.     

Elemental fluorine. Part 24.[1]: Fluorination of ethers by fluorine and Selectfluor

Reactions of dialkyl ethers with either fluorine or Selectfluor™ led to the formation of unusual difluorinated polyether products in modest yields. A mechanism involving initial fluorination of the site adjacent to ether oxygen followed by elimination of hydrogen fluoride, reaction of the generated enol system with a further equivalent of fluorinating agent giving an oxonium system which reacts with water during aqueous work-up to lead eventually to the products observed, is suggested.     

Corrosion of equipment and its protection at producing and technical application of organofluorine products

Extension of the nomenclature of fluorine-containing products, and modernization of the methods for their synthesis (liquid-phase and gas-phase fluorination of the feedstock with hydrogen fluoride, electrochemical fluorination in anhydrous hydrogen fluoride, direct fluorination with gaseous fluorine and with the use of metals carrying fluorine, etc.) require extension of research on the corrosion safety of equipment at the implementation of new technologies. Therefore, the Laboratory of Corrosion is systematically involved in the work on improving the technology of producing basic fluorinating agents, elemental fluorine and hydrogen fluoride, that are highly aggressive towards structural materials.     

Transition metal catalysis and nucleophilic fluorination

Transition metal catalyzed transformations using fluorinating reagents have been developed extensively for the preparation of synthetically valuable fluorinated targets. This is a topic of critical importance to facilitate laboratory and industrial chemical synthesis of fluorine containing pharmaceuticals and agrochemicals. Translation to (18)F-radiochemistry is also emerging as a vibrant research field because functional imaging based on Positron Emission Tomography (PET) is increasingly used for both diagnosis and pharmaceutical development. This review summarizes how fluoride sources have been used for the catalytic nucleophilic fluorination of various substrates inclusive of aryl triflates, alkynes, allylic halides, allylic esters, allylic trichloroacetimidates, benzylic halides, tertiary alkyl halides and epoxides. Until recently, progress in this field of research has been slow in part because of the challenges associated with the dual reactivity profile of fluoride (nucleophile or base). Despite these difficulties, some remarkable breakthroughs have emerged. This includes the demonstration that Pd(0)/Pd(II)-catalyzed nucleophilic fluorination to access fluoroarenes from aryl triflates is feasible, and the first examples of Tsuji-Trost allylic alkylation with fluoride using either allyl chlorides or allyl precursors bearing O-leaving groups. More recently, allylic fluorides were also made accessible under iridium catalysis. Another reaction, which has been greatly improved based on careful mechanistic work, is the catalytic asymmetric hydrofluorination of meso epoxides. Notably, each individual transition metal catalyzed nucleophilic fluorination reported to date employs a different F-reagent, an observation indicating that this area of research will benefit from a larger pool of nucleophilic fluoride sources. In this context, a striking recent development is the successful design, synthesis and applications of a fluoride-derived electrophilic late stage fluorination reagent. This new class of reagents could greatly benefit preclinical and clinical PET imaging.     

Nucleophilic fluoroalkylation of epoxides with fluorinated sulfones

The unprecedented nucleophilic fluoroalkylation of simple epoxides with fluorinated sulfones was achieved to give the beta-fluoroalkyl alcohols in one step. The negative "fluorine effect" in the nucleophilic fluoroalkylation of epoxides with fluorinated carbanions was probed by the reactivity comparison between carbanions PhSO2CF2- (3) and PhSO2CCl2- (4) and between carbanions PhSO2CHF- (7) and PhSO2CHCl- (13). The mediation of this fluorine effect by introducing another electron-withdrawing benzenesulfonyl group was found to be an effective way to significantly increase the nucleophilicity of the fluorinated carbanions, with the reactivity order [(PhSO2)2CF-] (16) > PhSO2CFH- (7) > PhSO2CF2- (3).     

Solid-state NMR and EPR study of fluorinated carbon nanofibers

Carbon nanofibers were fluorinated in two manners, in pure fluorine gas (direct fluorination) and with a fluorinating agent (TbF₄ during the so-called controlled fluorination). The resulting fluorinated nanofibers have been investigated by solid-state nuclear magnetic resonance (NMR) and electron paramagnetic resonance (EPR). This underlines that the fluorination mechanisms differ since a (CF)_n structural type is obtained, whatever the temperature, with the controlled reaction, whereas, during the direct process, a (C₂F)_n type is formed over a wide temperature range. Through a careful characterization of the products, i.e. density of dangling bonds (as internal paramagnetic centers), structural type (acting on molecular motion) and specific surface area (related to the amount of physisorbed O₂), the effect of atmospheric oxygen molecules on the spin-lattice nuclear relaxation has been underlined.     

有机分子中引入二氟亚甲基方法的最新进展

本综述从直接氟化法和间接氟化法两个方面就近些年来在有机化合物中引入二氟亚甲基的方法进行了概括。直接氟化法中，主要介绍了利用亲核和亲电两类氟化试剂在分子中导入-CF~2-的一些最新进展；间接氟化法则主要介绍了一些新的含-CF~2-的合成砌块在合成二氟亚甲基化合物中的应用。     

Fluorination with xenon difluoride. Reaction with halogenated hydrocarbons

Filler and coworkers [1-5] have demonstrated the utility of xenon difluoride as a selective fluorinating agent for aromatic hydrocarbons in the liquid phase, while Mackenzie and coworker [6] have fluorinated aromatic compounds in the vapour phase. We have developed a fluorination reaction of phenyl substituted olefins resulting in high yields of vicinal difluorides [7,8] and trifluoroacetates, depending on the catalyst. In our continued interest in the use of xenon difluoride as a mild fluorinating agent for fluorination of organic compounds, we have tries to fluorinate some heterocyclic ring systems, e.g. imidazo-(1,2-b)-pyridazine, under conditions similar of those used for fluorination of phenyl substituted olefins [7,8,9] (room temperature, methylene chloride as solvent, hydrogen fluoride as catalyst). It is well known that heteroaromatic compounds are less reactive toward electrophilic substitution reactions then aromatic hydrocarbon systems. However, it has been shown that bromination of imidazo-(1,2-b) -pyridazine results in 3-bromo products [10], while in chlorination with phosphorus pentachloride [11], the entering order of chlorine atoms is at position 3 > 2, 7 > 8 > 6 (Radical reactions).     

Reaction of 1-fluoro-2-trifluoromethoxy-1,1,2-trichloroethane with fluorinating agents

Conclusions In the reaction of 1-fluoro-2-trifluoromethoxy-1,1,2-trichloroethane with different fluorinating systems, dehydrochlorination and fluorination products are formed. It is assumed that substitution of chlorine atoms by fluorine takes place by the elimination-addition mechanism.Translated from Izvestiya Akademii Nauk SSSR, Seriya Khimicheskaya, No. 8, pp. 1885–1887, August, 1984.     

Photoredox-catalyzed deoxyfluorination of activated alcohols with Selectfluor®

Herein we disclose a deoxyfluorination of alcohols with an electrophilic fluorine source via visible-light photoredox catalysis. This radical-mediated C–F coupling is capable of fluorinating secondary and tertiary alcohols efficiently, complementing previously reported nucleophilic deoxyfluorination protocols.     

Fluorination of poly(p-phenylene) using TbF4 as fluorinating agent

The fluorination using TbF₄ as fluorinating agent was successfully performed on poly(p-phenylene). The method allows the fluorine content of the polymer to be controlled and the formation of structural defects, such as dangling bonds, to be significantly decreased by comparison with the direct fluorination using pure F₂ gas. The aromatic character of the phenyl ring is partly maintained through the fluorination contrary to the direct fluorination (using pure F₂ gas), for which a quasi-perfluorination and a partial decomposition of the polymer occur. Complementary analytical techniques have been used, such as ¹⁹F and ¹³C solid state NMR, FT-IR and EPR to compare the samples as a function of the reaction conditions.     

Selectfluor: Mechanistic Insight and Applications

The replacement of hydrogen atoms with fluorine substituents in organic substrates is of great interest in synthetic chemistry because of the strong electronegativity of fluorine and relatively small steric footprint of fluorine atoms. Many sources of nucleophilic fluorine are available for the derivatization of organic molecules under acidic, basic, and neutral conditions. However, electrophilic fluorination has historically required molecular fluorine, whose notorious toxicity and explosive tendencies limit its application in research. The necessity for an electrophilic fluorination reagent that is safe, stable, highly reactive, and amenable to industrial production as an alternative to very hazardous molecular fluorine was the inspiration for the discovery of selectfluor. This reagent is not only one of the most reactive electrophilic fluorinating reagents available, but it is also safe, nontoxic, and easy to handle. In this Review we document the many applications of selectfluor and discuss possible mechanistic pathways for its reaction.     

Selectfluor: mechanistic insight and applications

The replacement of hydrogen atoms with fluorine substituents in organic substrates is of great interest in synthetic chemistry because of the strong electronegativity of fluorine and relatively small steric footprint of fluorine atoms. Many sources of nucleophilic fluorine are available for the derivatization of organic molecules under acidic, basic, and neutral conditions. However, electrophilic fluorination has historically required molecular fluorine, whose notorious toxicity and explosive tendencies limit its application in research. The necessity for an electrophilic fluorination reagent that is safe, stable, highly reactive, and amenable to industrial production as an alternative to very hazardous molecular fluorine was the inspiration for the discovery of selectfluor. This reagent is not only one of the most reactive electrophilic fluorinating reagents available, but it is also safe, nontoxic, and easy to handle. In this Review we document the many applications of selectfluor and discuss possible mechanistic pathways for its reaction.     

使用DBDMH和Et3N·3HF的苯乙酮一锅法α-亲核氟代

报道一种通过溴代和氟代的一锅法操作,从苯乙酮直接制备α-氟代苯乙酮的新方法.使用1,3-二溴-5,5-二甲基海因(DBDMH)作为溴代试剂,三乙胺三氟化氢作为氟代试剂,除了p-和m-硝基苯乙酮之外,α-氟代苯乙酮以82%～87%的收率被获得.本方法使用的试剂价廉、收率较高、操作简单方便,有较高的应用价值.     

甲基磺酰氟Simons电化学氟化过程特性和机理研究

选择CH₃SO₂F电化氟化制备CF₃SO₂F过程为研究系统,研究了电化氟化过程操作电压和反应时间的关系、操作条件对氟化产物组成的影响规律以及Ni电极在电化氟化过程的变化情况. 实验结果表明,Simons电化学氟化过程主要由三个步骤组成：F-在阳极发生电化学氧化反应生成F,该步骤是Simons电化学氟化过程的控制步骤;在Ni电极上生成的F与Ni或NiF₂反应生成高价NiF_n (n≥3),NiFn为Simons电化学氟化过程的氟化剂;NiF_n可以在电极/电解液界面与有机物发生氟化反应生成氟化产物,也可以发生分解反应生成游离F²,NiF_n与有机物发生氟化反应的机理与用CoF₃等为氟化剂氟化有机物的机理相同. 但NiF_n的反应活性比CoF₃高,且在实验条件下极不稳定.     

氟代芳香族化合物四甲基氟化铵氟代脱硝法的合成

以高活性无水四甲基氟化铵（TMAFanh.）为氟化试剂,优化反应的条件为：n(Substrate)∶n(TMAF_anh.)=1∶1.4、DMF用量为0.4 L/mol Substrate,由硝基芳烃化合物经低温氟代脱硝反应合成了含氟芳香族化合物,反应温度80~100 ℃,反应时间1~5 h,氟代产物收率19.4%~99.0%。 反应具有原料易得、工艺简单、条件温和、产物收率高和副反应少等优点。     

Novel ruthenium(II)2 carboxylates as catalysts for alkene metathesis

The reactions of [Ru-(=CHR)Cl2(PCy3)2] (1: R = Ph; 1a: R = -CH=CPh2) with silver salts of carboxylic acids afforded new dimeric complexes of the general formula [Ru2(=CHR)2-(R'CO2)2(mu-R'CO2)2(PCy3)2(mu-H2O)] (2: R = Ph, R' = CF3; 3: R = Ph, R' = C2F5; 4: R = -CH=CPh2, R' = CF3; 5: R = Ph, R' = C6F5; 6: R = -CH=CPh2, R' = C6F5; 7: R = -CH=CPh2, R'=CCl3) in good yields. With R' = CF3, C2F5 or CCl3 these complexes are active catalysts for metathesis of acyclic alkenes, including unsaturated fatty acid esters, as well as for ring closing metathesis. The reactivity of these complexes with bases and weak donor solvents has been studied and their half-life times in several media were determined.     

1,1,3,3,3-Pentafluoropropene secondary amine adducts new selective fluorinating agents

Addition of secondary amine SA (dimethylamine DMA, diethylamine DEA, pyrrolidine Pyr, piperidine Pip, morpholine Mor) to pentafluoropropene PFP gives rise to generation of mixtures of two products (1-dialkylamine-1,3,3,3-tetrafluoropropene and N,N-dialkyl-1,1,3,3,3-pentafluoropropylamine) in different ratios. Those reaction mixtures, however, were found to be efficient fluorinating agents replacing hydroxyl groups in alcohols into fluorine. In general, they react with alcohols yielding corresponding fluorides, equimolar amounts of appropriate 3,3,3-trifluoropropionamide and hydrogen fluoride. Aliphatic primary alcohols including octanol and benzylic alcohol yield only alkyl fluorides. The secondary and tertiary alcohols, beside the desired fluorides, give usually considerably amount of alkenes.