Synthesis and electrochemical properties of nanostructured LiCoO2 fibers as cathode materials for lithium-ion batteries

Nanostructured LiCoO2 fibers were prepared by the sol-gel related electrospinning technique using metal acetate and citric acid as starting materials. The transformation from the xerogel fibers to the LiCoO2 fibers and the nanostructure of LiCoO2 fibers have been investigated in detail. The LiCoO2 fibers with 500 nm to 2 mum in diameter were composed of polycrystalline nanoparticles in sizes of 20-35 nm. Cyclic voltammetry and charge-discharge experiments were applied to characterize the electrochemical properties of the fibers as cathode materials for lithium-ion batteries. The cyclic voltammogram curves indicated faster diffusion and migration of Li+ cations in the nanostructured LiCoO2 fiber electrode. In the first charge-discharge process, the LiCoO2 fibers showed the initial charge and discharge capacities of 216 and 182 (mA.h)/g, respectively. After the 20th cycle, the discharge capacity decreased to 123 (mA.h)/g. The X-ray diffraction and high-resolution transmission electron microscopy analyses indicated that the large loss of capacity of fiber electrode during the charge-discharge process might mainly result from the dissolution of cobalt and lithium cations escaping from LiCoO2 to form the crystalline Li2CO3 and CoF2 impurities.     

Synthesis and electrochemical properties of graphene-SnS2 nanocomposites for lithium-ion batteries

Graphene-SnS₂ nanocomposites were prepared via a solvothermal method with different loading of SnS₂. The nanostructure and morphology of the samples were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), and transmission electron microscopy (TEM). The XRD patterns revealed that hexagonal SnS₂ was obtained. SEM and TEM results indicated that SnS₂ particles distributed homogeneously on graphene sheets. The electrochemical properties of the samples as active anode materials for lithium-ion batteries were examined by constant current charge–discharge cycling. The composite with weight ratio between graphene and SnS₂ of 1:4 had the highest rate capability among all the samples and its reversible capacity after 50 cycles was 351 mAh/g, which was much higher than that of the pure SnS₂ (23 mAh/g). With graphene as conductive matrix, homogeneous distribution of SnS₂ nanoparticles can be ensured and volume changes of the nanoparticles during the charge and discharge processes can be accomodated effectively, which results in good electrochemical performance of the composites.     

Negative and positive electrode materials for lithium-ion batteries

MnV₂O_{6 + δ}5 (0.5 < δ < 1) amorphous oxides reversibly insert large amounts of Li (e.g. Li₁₂MnV₂O_6.96) at low voltage (≈ 1 V). During the first Li insertion, Mn⁴⁺ is first reduced to Mn²⁺ and V⁵⁺ is reduced to V³⁺. Upon further cycling, the V oxidation state varies reversibly between +3 and +5, whereas the average Mn oxidation state varies reversibly between +2 and ~+2.6. Reversible lithium deintercalation of LiCr_yMn_{2 − y}O₄ (0 < y < 1) occurs in two steps at ≈ 4.9 V and 4 V. The cyclability is excellent for y≤ 0.5. It becomes very poor for y ≥ 0.75 due to a migration of transition metal cations from 16d to 8a and I6c sites, where they accumulate upon cycling.     

Electrode materials for lithium-ion batteries of new generation

The studies of fundamentally new electrochemical systems for lithium-ion batteries of new generation, which were performed at the Frumkin Institute of Physical Chemistry and Electrochemistry, Russian Academy of Sciences, are briefly reviewed. The results of investigation of lithium insertion into negative electrodes based on silicon and silicon-carbon composites and operation of positive electrodes of nano-structured materials based on vanadium oxides are described.     

原子尺度锂离子电池电极材料的近平衡结构

锂离子电池充放电过程中电极材料的结构变化与材料的电化学反应机理和性能密切相关.通过在原子尺度上直接观察脱/嵌锂前后电极材料的近平衡微观结构,有助于从更深层次认识电极反应机理和性能演化规律,对于全面理解材料的电化学行为以及改善锂离子电池性能具有重要的指导意义.本文详述了球差校正扫描透射成像技术在研究电极材料表界面结构及反应机理方面的进展,探讨了未来建立电极材料原子尺度结构与性能相关联可能的研究方向.     

Carboxylic acid-assisted solid-state synthesis of LiFePO4/C composites and their electrochemical properties as cathode materials for lithium-ion batteries

To enhance the capability of LiFePO₄ materials, we attempted to coat carbon by incorporating various organic carboxylic acids as carbon sources. The purity of LiFePO₄ was confirmed by XRD analysis. Galvanostatic cycling, cyclic voltammetry, electric impedance spectroscopy, and conductivity measurements were used to evaluate the material’s electrochemical performance. The best cell performance was delivered by the sample coated with 60 wt.% malonic acid. Its first-cycle discharge capacity was 149 mA h g^?1 at a 0.2 C rate or 155 mA h g^?1 at a 0.1 C rate. The presence of carbon in the composite was verified by total organic carbon and Raman spectral analysis. The actual carbon content of LiFePO₄ was 1.90 wt.% with the addition of 60 wt.% malonic acid. The LiFePO₄/C samples sintered with 60 wt.% various carboxylic acids were measured by Raman spectral analysis. The intense broad bands at 1,350 and 1,580 cm^?1 are assigned to the D and G bands of residual carbon in LiFePO₄/C composites, respectively. The peak intensity (I _D/I _G) ratio of the synthesized powders is from 0.907 to 0.935. Carbon coatings of LiFePO₄ with low I _D/I _G ratios can be produced by incorporating carboxylic acid additives before the final calcining process. The use of carboxylic acid as a carbon source increases the overall conductivity (～10^?4 S cm^?1) of the material.     

Intrinsic characteristics of cathode and anode materials for lithium-ion batteries

Fundamental aspects of solving the problem of how the working capacity of lithium-ion batteries in prolonged cycling can be raised and the basic tendencies in the relationship between the intrinsic parameters of active materials of various brands and the electrochemical behavior of anodes and cathodes fabricated from these materials are considered.     

Cycling parameters of silicon anode materials for lithium-ion batteries

Integrated analysis of the cycling parameters (reversible specific capacity, Coulomb efficiency, irreversible loss of cycle capacity, accumulated irreversible capacity, and retention of reversible capacity) of synthetic graphite of MAG brand as an active material for the negative electrode of lithium-ion batteries was made.     

Nano-sized carboxylates as anode materials for rechargeable lithium-ion batteries

Nano-sized caiboxylales Na2C7H3NO4 and Na2C6H2N2O4 were prepared and investigated as anode materials for lithium-ion batteries.Both carboxylates exhibit high reversible capacities around 190 mAh/g above a cut-off voltage of 0.8 V vs.Li＋/Li.potentially improving the safety of the batteries.In addition,good rate performance and long cycle life of these carboxylates make them promising candidates as anode materials for lithium-ion batteries.     

New electrode materials for lithium-ion batteries (Review)

The main principles of operation of modern lithium-ion batteries and the modern trends in development of new-generation batteries are described.     

Recent progress on Ge oxide anode materials for lithium-ion batteries

正1 Introduction As environmental pollution continues to worsen,governments are increasing their efforts to develop green transport vehicles,such as electric vehicles and hybrid cars.Efficient energy storage and conversion systems are urgently needed     

Enhancing LiNiO2 cathode materials by concentration-gradient yttrium modification for rechargeable lithium-ion batteries

Lithium nickel oxide (LiNiO2) cathode materials are featured with high capacity and low cost for rechargeable lithium-ion batteries but suffer from severe inter...     

Preparation and electrochemical properties of Si0.8Sb/C nanofiber composite anode materials for lithium-ion batteries

Journal of Solid State Electrochemistry - The Si0.8Sb/C nanofiber composite anode materials were synthesized with the method of high-energy ball milling combined with electrospinning. The...     

Synthesis and properties of nanosized tin-zinc composite oxides as lithium storage materials

After preparing the precursor by a liquid precipitation method, a series of tin-zinc composite oxides with different components and structures were synthesized as the anode materials for lithium ion batteries when the precursor was pyrolyzed at different temperatures. The products were characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM), and electrochemical measurements. The reversible capacity of amorphous ZnSnO₃ is 844 mA · h/g in the first cycle and the charge capacity is 695 mA · h/g in the tenth cycle. The reversible capacity of ZnO · SnO₂ is 845 mA · h/g in the first cycle and the charge capacity is 508 mA · h/g in the tenth cycle. The reversible capacity of SnO₂ · Zn₂SnO₄ is 758 mA · h/g in the first cycle and the charge capacity is 455 mA · h/g in the tenth cycle. Results show that amorphous ZnSnO₃ exhibits the best electrochemical property among all of the tin-zinc composite oxides. With the formation of crystallites in the samples, the electrochemical property of the tin-zinc composite oxides decreases. Translated from Chem J Chin Univ, 2006, 27(12): 2252–2255 [译自: 高等学校化学学报]     

Physical and electrochemical properties of La-doped LiFePO4/C composites as cathode materials for lithium-ion batteries

Olivine-type LiFePO₄ is one of the most promising cathode materials for lithium-ion batteries, but its poor conductivity and low lithium-ion diffusion limit its practical application. The electronic conductivity of LiFePO₄ can be improved by carbon coating and metal doping. A small amount of La-ion was added via ball milling by a solid-state reaction method. The samples were characterized by X-ray diffractometer (XRD), scanning electron microscopy (SEM)/mapping, differential scanning calorimetry (DSC), transmission electron microscopy (TEM)/energy dispersive X-ray spectroscopy (EDS), and total organic carbon (TOC). Their electrochemical properties were investigated by cyclic voltammetry, four-point probe conductivity measurements, and galvanostatic charge and discharge tests. The results indicate that these La-ion dopants do not affect the structure of the material but considerably improve its rate capacity performance and cyclic stability. Among the materials, the LiFe_0.99La_0.01PO₄/C composite presents the best electrochemical behavior, with a discharge capacity of 156 mAh g^?1 between 2.8 and 4.0 V at a 0.2 C-rate compared to 104 mAh g^?1 for undoped LiFePO₄. Its capacity retention is 80% after 497 cycles for LiFe_0.99La_0.01PO₄/C samples. Such a significant improvement in electrochemical performance should be partly related to the enhanced electronic conductivities (from 5.88?×?10^?6 to 2.82?×?10^?3 S cm^?1) and probably the mobility of Li⁺ ion in the doped samples. The LiFe_0.99La_0.01PO₄/C composite developed here could be used as a cathode material for lithium-ion batteries.     

High-energy 'composite' layered manganese-rich cathode materials via controlling Li2MnO3 phase activation for lithium-ion batteries

The 'composite' layered materials for lithium-ion batteries have recently attracted great attention owing to their large discharge capacities. Here, the 0.5Li(2)MnO(3)·0.5LiMn(0.42)Ni(0.42)Co(0.16)O(2)'composite' layered manganese-rich material is prepared and characterized by the synchrotron X-ray powder diffraction (SXPD). The relationship between its electrochemical performance and its 'composite' components, the Li(2)MnO(3) phase activation process during cycling and the cycle stability of this material at room temperature are elucidated based on its kinetic controlled electrochemical properties, dQ/dV curves and Raman scattering spectroscopies associated with different initial charge-discharge current densities (5 mA g(-1), 20 mA g(-1) and 50 mA g(-1)), cut-off voltages (4.6 V and 4.8 V) and cycle numbers (50 cycles and 150 cycles). Furthermore, its reaction pathways are tracked via a firstly introduced integrated compositional phase diagram of four components, Li(2)MnO(3), LiMn(0.42)Ni(0.42)Co(0.16)O(2), MO(2) (M = Mn(1-α-β)Ni(α)Co(β); 0 ≤α≤ 5/12, 0 ≤β≤ 1/6) and LiMnO(2), which turns out to be a very important guiding tool for understanding and utilizing this 'composite' material.     

Synthesis and electrochemical characterizations of nano-crystalline LiFePO4 and Mg-doped LiFePO4 cathode materials for rechargeable lithium-ion batteries

Nano-crystalline LiFePO₄ and LiMg_0.05Fe_0.95PO₄ cathode materials were synthesized by sol–gel method in argon atmosphere using succinic acid as a chelating agent. Physico-chemical characterizations were done by thermogravimetric and differential thermal analysis, X-ray diffraction, scanning electron microscopy, transmittance electron microscopy, and Raman spectroscopy. Electrochemical behavior of the cathode materials were analyzed using cyclic voltammetry, and galvanostatic charge/discharge cycling studies were employed to characterize the reaction of lithium-ion insertion into and extraction from virginal and magnesium-doped LiFePO₄, in the voltage range 2.5 to 4.5 V (Vs Li/Li⁺) using 1 M LiPF₆ with 1:1 ratio of ethylene carbonate and dimethyl carbonate as electrolytes. LiMg_0.05Fe_0.95PO₄ exhibits initial charge and discharge capacities of 159 and 141 mAh/g at 0.2 C rate respectively, as compared to 121 and 107 mAh/g of pristine LiFePO₄. Furthermore, LiMg_0.05Fe_0.95PO₄ has retained more than 89% of the capacity even after 60 cycles. Hence, LiMg_0.05Fe_0.95PO₄ is a promising cathode material for rechargeable lithium-ion batteries.     

Recent progress of advanced anode materials of lithium-ion batteries

The rapid development of electric vehicles and mobile electronic devices is the main driving force to improve advanced high-performance lithium ion batteries (L...