Thermodynamics of Cadmium Chloride in 2-Butanone + Water Mixtures (5, 10, and 15 Mass%) from Electromotive Force Measurements

The emf (electromotive force) of the cell: CdHg_x (two phase) | CdCl₂ (m) | AgCl | Ag in 2-butanone + water mixtures (containing 5, 10, and 15 mass% 2-butanone) was measured at varying temperature (293.15, 298.15, 303.15, 308.15, and 313.15 K) and in the CdCl₂ molality range from 0.002 to 0.02 mol-kg^–1. At each temperature the standard emf of the cell (E_m^o) was determined using potentiometric data and literature values for the stability constants of chlorocadmium complexes. The E_m^o values were used to calculate the standard thermodynamic quantities for the cell reaction, the stoichiometric mean molal activity coefficients of CdCl₂, and the thermodynamic functions for CdCl₂ transfer from water to 2-butanone + water mixtures. The transfer process is a forced one and results in an entropy decrease. The transfer functions were compared to those obtained for the same electrolyte in acetone + water mixtures, as well as to those for HBr in ketone + water mixtures. Medium effects upon CdCl₂ were calculated and discussed for the examined mixtures (2-butanone + water).     

Kinetic Study of Erbium Ion Adsorption on Activated Charcoal from Aqueous Solutions

The kinetics of the adsorption of erbium ions on activated charcoal from aqueous solutions has been studied in the temperature range of 10 to 40∘C. It was observed that the diffusion of erbium ions in to the pores of activated charcoal controls the kinetics of the adsorption process, and the values of intra-particle diffusion rate constant, k_d (g/g ⋅ min^1/2) were evaluated as 0.7 × 10⁻³ to 1.6 × 10⁻³ in the temperature range studied. Various thermodynamic parameters Δ H, Δ G and Δ S were also computed from values of the equilibrium constant K_C. The results showed that the adsorption of erbium ions on activated charcoal is an endothermic process.     

Thermochemistry of the solid complex Gd(Et<Subscript>2</Subscript>dtc)<Subscript>3</Subscript>(phen)

Summary A ternary solid complex Gd(Et₂dtc)₃(phen) has been obtained from reactions of sodium diethyldithiocarbamate (NaEt₂dtc), 1,10-phenanthroline (phen) and hydrated gadolinium chloride in absolute ethanol. The title complex was described by chemical and elemental analyses, TG-DTG and IR spectrum. The enthalpy change of liquid-phase reaction of formation of the complex, Δ_rH^Θ_m(l), was determined as (-11.628±0.0204) kJ mol^-1 at 298.15 K by a RD-496 III heat conduction microcalorimeter. The enthalpy change of the solid-phase reaction of formation of the complex, Δ_rH^Θ_m(s), was calculated as (145.306±0.519) kJ mol^-1 on the basis of a designed thermochemical cycle. The thermodynamics of reaction of formation of the complex was investigated by changing the temperature of liquid-phase reaction. Fundamental parameters, the apparent reaction rate constant (k), the apparent activation energy (E), the pre-exponential constant (A), the reaction order (n), the activation enthalpy (Δ_rH^Θ_≠), the activation entropy (Δ_rS^Θ_≠), the activation free energy (Δ_rG^Θ_≠) and the enthalpy (Δ_rH^Θ_≠), were obtained by combination of the thermodynamic and kinetic equations for the reaction with the data of thermokinetic experiments. The constant-volume combustion energy of the complex, Δ_cU, was determined as (-18673.71±8.15) kJ mol^-1 by a RBC-II rotating-bomb calorimeter at 298.15 K. Its standard enthalpy of combustion, Δ_cH^Θ_m, and standard enthalpy of formation, Δ_fH^Θ_m, were calculated to be (-18692.92±8.15) kJ mol^-1 and (-51.28±9.17) kJ mol^-1, respectively.     

Natural abundance C REDOR coupled to a singly N-labeled nucleus: simultaneous determination of interatomic distances in crystalline ammonium [N] -glutamate monohydrate

REDOR technique was applied to natural abundance ¹³C nuclei coupled to a singly labeled ¹⁵N nucleus to determine the ¹³C, ¹⁵N interatomic distances simultaneously in crystalline ammonium [¹⁵N] -glutamate monohydrate (1). Consequently, the interatomic C–N distances between ¹⁵N and ¹³C=O, ¹³C_α, ¹³C_β, ¹³C_γ, and ¹³C_δ carbon nuclei for 1 were determined with a precision of ±0.15 Å, after the experimental conditions such as the location of samples in the rotor, length of π pulse etc. were carefully optimized. ¹³C-REDOR factors for three spin system, (ΔS/S₀)_CN1N2, and the sum of two isolated 2-spin system, (ΔS/S₀)^*=(ΔS/S₀)_CN1+(ΔS/S₀)_CN2, were further evaluated by the REDOR measurements on isotopically diluted 1 in a controlled manner. Subsequently, the intra- and intermolecular C–N distances were separated by searching the minima in the contour map of root mean square deviation (RMSD) between the theoretically and experimentally obtained (ΔS/S₀)^* values against two interatomic distances, r_C–N1 and r_C–N2. When the intramolecular C–N distance (r_C–N1) of the particular carbon nucleus is substantially shorter than the intermolecular one (r_C–N2), C–N distances within a single molecule were obtained with an accuracy of ±0.06 Å as in the cases of C=O, C_α and C_β carbon nuclei. C–N distances between the molecule in question and the nearest neighboring molecules can be also obtained, although accuracy was lower. On the contrary, it was difficult to determine the interatomic distances in the same molecule when the intermolecular dipolar contribution is larger than the intramolecular one as in the case of C_δ carbon nucleus.     

Standard potentials of silver-silver bromide electrode and related thermodynamic quantities in (5, 10 and 15 wt-%) 2-butanol-water mixtures

The standard potentials of silver-silver bromide electrode in 5, 10 and 15 wt.-% 2-butanol have been determined from e.m.f. measurements of a cell of the type: Pt(or Pd), H₂(g)|HBr(m), 2-butanol-water mixtures| AgBr, Ag at temperatures 15°, 25° and 35°C and in the molality range of HBr from 0.003 to 0.1 mol kg^?1. Standard potentials were utilized to calculate: (1) the standard thermodynamic quantities for the cell reaction and for the reaction of HBr formation, (2) the mean activity coefficients of HBr, and (3) the standard thermodynamic quantities for transfer of HBr from water to 2-butanol-water mixtures. The thermodynamic functions for the transfer process have been interpreted in regard to the acid-base properties and structure of the solvents.     

Structure determination from powder diffraction data and thermal behaviour of layered lead nitrate oxalate hydrate, Pb2(NO3)2(C2O4).2H2O

The mixed lead nitrate oxalate, Pb₂(NO₃)₂(C₂O₄).2H₂O, has been obtained in a polycrystalline form in the course of a study on precursors of nanocrystalline PZT-type oxides. Its crystal structure has been solved from powder diffraction data collected using a monochromatic radiation from a conventional X-ray source. The symmetry is monoclinic, space group P2₁/c (No. 14), the cell dimensions are a=10.623(2) Å, b=7.9559(9) Å, c=6.1932(5) Å, β=104.49(1)° and Z=4. The structure consists of a stacking of complex double sheets parallel to (1 0 0), forming layers held together by hydrogen bonds. The sheets result from the condensation of PbO₁₀ polyhedra, in which the oxalate and nitrate groups, as well as water molecules, play a major role. The structure is discussed in terms of Pb---O distances, polyhedra shape and lead coordination, with emphasis on the dimensional polymerisation role of water molecules. The thermal behaviour of this layered compound is carefully described from temperature-dependent powder diffraction and thermogravimetric measurements. The enthalpy, Δ_rH=232(3) kJ mol⁻¹, and entropy, Δ_rS=532(8) J K⁻¹ mol⁻¹, of the dehydration reaction have been determined. The high value of Δ_rH demonstrates that the water molecules are strongly bonded in the structure. The complex decomposition proceeds through the crystallisation and decomposition of Pb(NO₃)₂(C₂O₄) into Pb(NO₃)₂ and PbC₂O₄, and, finally, various lead oxides.     

A Thermodynamic Study Between 18-Crown-6 with Mg2+, Ca2+, Sr2+and Ba2+ Cations in Water–Methanol and Water–Ethanol Binary Mixtures Using The Conductometric Method

The complexation reactions between Mg²⁺, Ca²⁺, Sr²⁺ and Ba²⁺ cations with the macrocyclic ligand, 18-Crown-6 (l8C6) in water–methanol (MeOH) binary systems as well as the complexation reactions between Ca²⁺ and Sr²⁺ cations with 18C6 in water–ethanol (EtOH) binary mixtures have been studied at different temperatures using conductometric method. The conductance data show that the stoichiometry of all the complexes is 1:1. It was found that the stability of 18C6 complexes with Mg²⁺, Ca²⁺, Sr²⁺ and Ba²⁺ cations is sensitive to solvent composition and in all cases, a non-linear behaviour was observed for the variation of log K _f of the complexes versus the composition of the mixed solvents. In some cases, the stability order is changed with changing the composition of the mixed solvents. The selectivity order of 18C6 for the metal cations in pure methanol is: Ba²⁺ > Sr²⁺ > Ca²⁺ > Mg²⁺. The values of thermodynamic parameters (Δ H _c ° and Δ S _c °) for formation of 18C6–Mg²⁺, 18C6–Ca²⁺, 18C6–Sr²⁺ and 18C6–Ba²⁺complexes were obtained from temperature dependence of the stability constants. The obtained results show that the values of (Δ H _c ° and Δ S _c °) for formation of these complexes are quite sensitive to the nature and composition of the mixed solvent, but they do not vary monotonically with the solvent composition.This revised version was published online in July 2005 with a corrected issue number.     

Excess Molar Volumes,Viscosity Deviations and Isentropic Compressibility of Binary Mixtures Containing 1,3-Dioxolane and Monoalcohols at 303.15 K

The excess molar volume (V ^E), viscosity deviations (Δη) and Gibbs excess energy of activation for viscous flow (G^∗E) have been investigated from density (ρ) and viscosity (η) measurements of eight binary mixtures of 1,3-dioxolane with methanol, ethanol, 1-propanol, 2-propanol, 1-butanol, 2-butanol, t-butanol, and i-amyl alcohol over the entire range of mole fractions at 303.15 K. The viscosity data have been correlated with the Grunberg and Nissan equation. Furthermore, excess isentropic compressibilities (K_S^E) have been calculated from ultrasonic speed measurements of these binary mixtures at 303.15 K. The deviations have been fitted by a Redlich–Kister equation and the results are discussed in terms of molecular interactions and structural effects. The excess properties are found to be either negative or positive depending on the molecular interactions and the nature of the liquid mixtures. The systems studied exhibit very strong cross association through hydrogen bonding.     

Activity Coefficient Determinations of KCl in the KCl + Formamide + Water Mixed Solvent System Based on Potentiometric Measurements at 298.2 K

In this work mean activity coefficient measurements for KCl in the KCl + formamide + water system, using the potentiometric method, are reported. The electromotive force measurements were performed on a galvanic cell of the type Ag | AgCl | KCl (m), formamide (w%), H₂O (1−w)% | K-ISE, in solvent mixtures containing w=(0,10,20,30, and 40)% mass percent of formamide over ionic strengths ranging from 0.0010 to 3.9578 mol⋅kg⁻¹. Modeling of the activity coefficients of this ternary system was based on an extended Debye–Hückel equation and the Pitzer ion-interaction model. The resulting values of the mean activity coefficients, the osmotic coefficients and the excess Gibbs energy, together with Pitzer ion-interaction parameters (β ⁽⁰⁾, β ⁽¹⁾ and C ^ϕ ) and Debye–Hückel parameters (a, c and d), are reported for the investigated system.     

Ionization Constants of o-Phthalic Acid and Standard pH Values of Potassium Hydrogen Phthalate Buffer Solutions in Glycerol + Water Solvent Mixtures at Normal and Subzero Temperatures

Determination of primary standards for pH measurements in glycerol + water solventmixtures has been carried out based on reversible emf measurements of the cellPt|H₂|KHPh (m _PS) + KCl (m _Cl)|AgCl|Ag|Ptwhere KHPh denotes the potassium hydrogen phthalate buffer solution of molalitym _PS = 0.05 mol-kg^–1, at glycerol mass fractions w _G = 0.2 and 0.4, within thetemperature range –10 to 40°C. A multilinear regression procedure as a functionof electrolyte molality, glycerol mass fraction w _G, and temperature T has beenapplied for the data processing leading to the values of primary standards pH_PS.These can be represented by the following regression equationpH_PS = (4.007037±0.001113) + (3.55844±0.01776)x _G+(0.39622±0.01410)z + (4.3084±0.3377)z ²– (50.66±10.53)x _G z ² + (457.10±78.48)x _G ² z ²where z = (T – 298.15)/298.15. Parallel values of the first ionization constantof o-phthalic acid (H₂Ph; benzene-1,2-dicarboxylic acid, the parent acid of KHPh),which are essential for the above calculations, have been determined fromreversible emf measurements of the cellPt|H₂|H₂Ph (m ₁) + KHPh (m ₂) + KCl (m ₃)|AgCl|Ag|Ptover the range of solvent composition and temperatures mentioned above.     

Adsorption of <Emphasis Type="Italic">n</Emphasis>-Butanol from Aqueous Solutions on an Sn-Ga Electrode in the Absence of a Metal-Water Chemisorption Interaction

Data on the dependence of the differential capacitance on potential at the Sn-Ga/H₂O interface in 0.05 M solutions of Na₂SO₄ with various additives of n-butanol are obtained by a bridge method at a frequency of 420 Hz and a temperature of 32°C. In the region of potentials studied, the chemisorption interaction (Sn-Ga)-H₂O is completely absent. The adsorption parameters of n-butanol are obtained by a method of a regression analysis of these data. The data obtained are compared with similar data on various hydrophobic electrodes. Shown is that, on the Sn-Ga and Pb-Ga electrodes, whose “electronic” capacitance is similar, the free energies of adsorption of n-butanol are also similar but differ from the adsorption energy on electrodes of Hg, Bi-Ga, and Tl-Ga. The results that are obtained on an Sn-Ga electrode nicely fit a general correlation dependence between the reciprocal value of the electronic capacitance of various electrodes in the absence of a metal-water chemisorption interaction, (C _m ⁻¹ ), and the free energies of adsorption of molecules of n-butanol on these, ΔG _A ⁰ . The dependence of the free energies of adsorption of molecules of n-butanol in the absence of a metal-water chemisorption interaction on the magnitude of the electronic capacitance of the metal confirms the assumption that we had put forth previously that it is necessary to introduce corrections to criteria of hydrophilicity of metals based on a comparison of quantities ΔG _A ⁰ and potentials of cathodic peak of adsorption-desorption E _des, which are expressed in a rational scale. With the obtained correlation relationships taken into account, criteria of hydrophilicity are suggested, which take into account these correlation relationships.__________Translated from Elektrokhimiya, Vol. 41, No. 7, 2005, pp. 884–892.Original Russian Text Copyright © 2005 by Emets, Damaskin.     

Studies of the complex formation of silver (I) ion with 18-crown-6 in H2O-DMSO mixtures by calorimetry

The thermodynamic parameters (D_rG⁰, D_r H ⁰, TD_r S ⁰) of the reaction of [Ag18C6]⁺ complex formation were obtained for a wide range of H₂O-DMSO mixtures from the calorimetric data at 298.15 K. The relation between the thermodynamic parameters of complex formation and solvation of each reagent was investigated. This revised version was published online in July 2006 with corrections to the Cover Date.     

Standard potentials of the silver,silver bromide electrode and the thermodynamic properties of hydrobromic acid in 1,2-dimethoxyethane and its aqueous mixtures

The standard potentials of the silver, silver bromide electrode have been determined in 1,2-dimethoxyethane (DME) and in nineteenDME + water solvents from the e.m.f. measurements of cells of the type Pt|H₂(g, 1 atm)|HBr (m), solvent|AgBr|Ag at intervals of 5°C from 5 to 45°C. The molality of HBr covered the range from 0.01 to 0.1 mol kg^–1. In solvents of highDME content, where the dielectric constant is small, it was necessary to correct for ion-pair formation. The temperature variation of the standard potential has been used to evaluate the standard thermodynamic functions for the cell reaction, and the standard quantities for the transfer of HBr from water to the respective solvents. The results have been discussed both in relation to the acid-base nature of the solvent mixtures and also their structural effects on the transfer process.

---

Standardpotentiale der Silber, Silberbromid-Elektrode und thermodynamische Eigenschaften von H Br in 1,2-Dimethoxyethan und 1,2-Dimethoxyethan—Wasser-Mischungen

Zusammenfassung Die Standardpotentiale der Silber, Silberbromid-Elektrode wurden in 1,2-Dimethoxyethan (DME) und in 19 verschiedenenDME—Wasser-Gemischen aus EMK-Messungen der Zelle Pt|H₂(g,1 atm)|HBr (m), Lsgsm.|AgBr|Ag in Temperaturintervallen von 5°C zwischen 5 und 45°C bestimmt. Die Molalität von HBr deckte den Bereich von 0,01 bis 0,1 mol kg^–1. Bei Lösungen mit höheremDME-Gehalt — und damit niedrigen Dielektrizitätskonstanten —war es nötig, für die Bildung von Ionenpaaren eine Korrektur einzuführen. Über die Temperaturvariation wurden die thermodynamischen Größen für die Zellenreaktion und die Standardgrößen für den Transfer von HBr aus Wasser in das jeweilige Lösungsmittel bestimmt. Die Ergebnisse werden sowohl im Zusammenhang zur Säure-Base-Natur de Lösungsmittelmischungen als auch in bezug auf strukturelle Effekte im Transferprozeß diskutiert.

     

Micellization behavior of [C16-12-C16], 2Br gemini surfactant in binary aqueous-solvent mixtures

The micellization behavior of bis cationic gemini surfactant, N,N′-dihexadecyl-N,N,N′,N′-tetramethyl-1,12-dodecanediammonium dibromide [C₁₆H₃₃N⁺(CH₃)₂-(CH₂)₁₂-N⁺(CH₃)₂C₁₆H₃₃, 2Br⁻] has been studied in binary aqueous mixtures of dimethyl sulfoxide, methanol, 1,4-dioxane, glycerol and ethylene glycol by conductivity and surface tension measurements at 300 K. The critical micellar concentration, degree of micelle ionization (α), surface excess concentration (Г_max), minimum surface area per molecule of surfactant (A_min), Gibbs free energy of micellization (ΔG_m°), the surface pressure at cmc (π_cmc), and the Gibbs energy of adsorption (ΔG_ad°) of the gemini surfactant have also been determined. The cmc, α, A_min increases where as (ΔG_m°), Г_max, and π_cmc decreases with increasing volume percentage of the solvents in the solvent–water binary mixture. The interfacial properties of the gemini surfactant, solute–solute, solvent–solute interactions and the effectiveness of a surface-active molecule in binary solvent systems have been discussed.     

Synthesis and Crystal Structure of [Co(H<Subscript>2</Subscript>O)<Subscript>6</Subscript>](C<Subscript>19</Subscript>H<Subscript>17</Subscript>O<Subscript>4</Subscript>SO<Subscript>3</Subscript>)<Subscript>2</Subscript>⋅8H<Subscript>2</Subscript>O

The title compound, cobalt 4′,7-diethoxylisoflavone-3′-sulfonate([Co(H₂O)₆](X)₂⋅8H₂O, X = C₁₉H₁₇O₄SO₃) was synthesized and its structure was determined by single-crystal X-ray diffraction analysis. It crystallizes in the triclinic space group P-1 with cell parameters a = 9.026(3) Å, b = 16.431(5) Å, c = 18.195(6) Å, α = 72.289(4)^∘, β = 87.498(4)^∘, γ = 82.775(5)^∘, V = 2550.1(13) Å⁻³, D_c = 1.419 Mg m⁻³, and Z = 2. The results show that the title compound consists of one cobalt cation, six coordinated water molecules, eight lattice water molecules, and two 4′,7-diethoxylisoflavone-3′-sulfonate anions, C₁₉H₁₇O₄SO⁻₃. Two anions have different conformations. Twelve H atoms of six coordinated water molecules, as donors, form hydrogen bonds with four oxygen atoms of sulfo-groups of two anions and eight oxygen atoms of eight lattice water molecules. In addition, π < eqid1 > ⋅ < eqid2 > π stacking interactions exist in the crystal structure, which together with hydrogen bonds lead to supramolecular formation with a three-dimensional network.     

Influence of Hydrolysis Water Content on the Microstructure of BaTiO3 Xerogels Prepared from High Concentration Metal Alkoxide Solutions

Optically clear and partially crystallized barium titanate (BaTiO₃) monolithic xerogels were prepared by hydrolyzing the high concentration precursor solutions (1.1 mol/L) of metal alkoxides with water vapor to have different hydrolysis water contents (H₂O/Ba-alkoxide mole ratio (r _w) = 2.5–7.0). The microstructural changes of the xerogels have been studied by TEM, XRD and nitrogen adsorption/desorption analysis. The crystallite size of the xerogels was found to increase consecutively with increasing r _w, while the average pore size showed no substantial increase until r _w = 5.0 and it grew rapidly for r _w > 5.0. The influence of r _w on the microstructural development of the xerogels with heat-treatment was also discussed.     

Excess thermodynamic parameters of binary mixtures of methanol,ethanol, 1-propanol,and 2-butanol + chloroform at (288.15–323.15 K) and comparison with the Flory theory

In this work we used the experimental result for calculating the thermal expansion coefficients α, and their excess values α ^E , and isothermal coefficient of pressure excess molar enthalpy and comparison the obtain results with Flory theory of liquid mixtures for the binary mixtures {methanol, ethanol, 1-propanol and 2-butanol-chloroform} at 288.15, 293.15, 298.15, 303.15, 308.15, 313.15, 318.15, and 323.15 K. The excess thermal expansion coefficients α ^E and the isothermal coefficient of pressure excess molar enthalpy ((∂H _m^E/∂P) _T,x for binary mixtures of {methanol and ethanol + chloroform} are S-shaped and for binary mixtures of {1-propanol and 2-butanol + chloroform} are positive over the mole fraction. The isothermal coefficient of pressure excess molar enthalpy (∂H _m^E/∂P) _T,x , are negative over the mole fraction range for binary mixture of {1-propanol and 2-butanol + chloroform}. The calculated values by using the Flory theory of liquid mixtures show a good agreement between the theory and experimental.     

Thermodynamics of mixed-ligand complexation of cerium group lanthanide ethylenediaminetetraacetates

The thermodynamic parameters (logK, Δ _r G ⁰, Δ _r H, and Δ _r S) for mixed-ligand complexation of LnEdta⁻ (Ln³⁺ = La³⁺, Ce³⁺, Pr³⁺, Nd³⁺, Sm³⁺, Gd³⁺) with iminodiacetate and nitrilotriacetate ions in aqueous solution at 298.15 K and ionic strength I = 0.5 (KNO₃) were determined by calorimetry and pH-metry. The variation of the thermodynamic parameters of the reactions over the lanthanide series was discussed.     

High-pressure preparation, crystal structure, and properties of the new rare-earth oxoborate β-Dy2B4O9

In this work we report about a new rare-earth oxoborate β-Dy₂B₄O₉ synthesized under high-pressure/high-temperature conditions from Dy₂O₃ and boron oxide B₂O₃ in a B₂O₃/Na₂O₂ flux with a walker-type multianvil apparatus at 8 GPa and 1000°C. Single crystal X-ray structure determination of β-Dy₂B₄O₉ revealed: , a=616.2(1) pm, b=642.8(1) pm, c=748.5(1) pm, α=102.54(1)°, β=97.08(1)°, γ=102.45(1)°, Z=2, R1=0.0151, wR₂=0.0475 (all data). The compound exhibits a new structure type which is built up from bands of linked BO₃- (Δ) and tetrahedral BO₄-groups (□). The Dy³⁺-cations are positioned in the voids between the bands. According to the conception of fundamental building blocks β-Dy₂B₄O₉ can be classified with the notation 2Δ6□:Δ3□=4□=3□Δ. Furthermore we report about temperature-resolved in situ powder diffraction measurements and IR-spectroscopic investigations on β-Dy₂B₄O₉.