Formation of a cationic alkylidene complex via formal hydride abstraction: synthesis and structural characterization of [W(PMe3)4(η2-CHPMe2)H]X (X = Br, I)

W(PMe(3))(4)(η(2)-CH(2)PMe(2))H reacts with aryl halides to give the alkylidene complex, [W(PMe(3))(4)(η(2)-CHPMe(2))H](+), which reacts with LiAlD(4) to give selectively W(PMe(3))(4)(η(2)-CHDPMe(2))H, in which the deuterium resides in the methylene group; subsequent migration of deuterium from the methylene group provides a means to measure the rate constant for the formation of the 16-electron species [W(PMe(3))(5)] from W(PMe(3))(4)(η(2)-CH(2)PMe(2))H.     

Step-by-step uncoordination of the pyrazolyl rings of hydrotris(pyrazolyl)borate ligands in comlexes of Rh and RhIII

Compounds of rhodium(I) and rhodium(III) that contain ancillary hydrotris(pyrazolyl)borate ligands (Tp') react with monodentate and bidentate tertiary phosphanes in a step-wise manner, with incorporation of P-donor atoms and concomitant replacement of the Tp' pyrazolyl rings. Accordingly, [Rh(kappa3-TpMe2)(C2H4)(PMe3)] (1b), converts initially into [Rh(kappa2-TpMe2)-(PMe3)2] (3), and then into [Rh(kappa1-TpMe2)-(PMe3)3] (2) upon interaction with PMe3 at room temperature, in a process which can be readily reversed under appropriate experimental conditions. Full disengagement of the Tp' ligand is feasible to give Tp' salts of rhodium(I) complex cations, for example, [Rh(CO)(dppp)2]-[TpMe2,4-Cl] (5; dppp = Ph2P(CH2)3PPh2), or [Rh(dppp)2][TpMe2,4-Cl] (6). Bis(hydride) derivatives of rhodium(III) exhibit similar substitution chemistry, for instance, the neutral complex [Rh(Tp)-(H)2(PMe3)] reacts at 20 degrees C with an excess of PMe3 to give [Rh(H)2-(PMe3)4][Tp] (9b). Single-crystal X-ray studies of 9b, conducted at 143 K, demonstrate the absence of bonding interactions between the [Rh(H)2(PMe3)4]+ and Tp ions, the closest Rh...N contact being at 4.627 A.     

Insertion of alkynes into the Pt-Si bond of silylplatinum complexes leading to the formation of 4-sila-3-platinacyclobutenes and 5-sila-2-platina-1,4-cyclohexadienes

The reaction of dimethyl acetylenedicarboxylate (DMAD) with [Pt(SiHPh(2))(2)(PMe(3))(2)] produces cis-[Pt(CZ=CZ-SiHPh(2))(SiHPh(2))(PMe(3))(2)] (cis-1, Z = COOMe) and [Pt(CZ=CZ-SiPh(2))(PMe(3))(2)] (2) depending on the reaction conditions. cis-1 and 2 are equilibrated in solution at room temperature, and they are isolated by recrystallization of the mixtures. cis-1 is converted slowly in solution into trans-[Pt(CZ=CZ-SiHPh(2))(SiHPh(2))(PMe(3))(2)] (trans-1) via intermediate 2 followed by reaction with H(2)SiPh(2). DMAD also reacts with [Pt(SiHPh(2))(2)(dmpe)] (dmpe = 1,2-bis(dimethylphosphino)ethane) to afford [Pt(CZ=CZ-SiHPh(2))(SiHPh(2))(dmpe)] (3). Conversion of 3 into 4-sila-3-platinacyclobutene [Pt(CZ=CZ-SiPh(2))(dmpe)] (4) takes place, accompanied by formation of H(2)SiPh(2), to give an equilibrated mixture of the two complexes. Crystallographic and spectroscopic data of cis-1, trans-1, and 3 suggest the presence of an intramolecular interaction between the Si-H group of the 3-sila-1-propenyl ligand and Pt via an Si-H-Pt three-center-four-electron bond in the solid state and in solution. DMAD reacts with 2 to give 5-sila-2-platina-1,4-cyclohexadiene with pi-coordinated DMAD, [Pt(CZ=CZ-SiPh(2)-CZ=CZ)(DMAD)(PMe(3))(2)] (5), which is also obtained from the reaction of excess DMAD with [Pt(SiHPh(2))(2)(PMe(3))(2)]. Unsymmetrical six-membered silaplatinacycles without pi-coordinated alkyne, [Pt(CZ=CZ-SiPh(2)-CH=CX)(PMe(3))(2)] (6: X = COOMe; 7: X = Ph), are prepared analogously from the respective reactions of phenyl acetylene and of methyl acetylene carboxylate with 2. Methyl 2-butynolate reacts with 2 at 50 degrees C to form a mixture of the regioisomers [Pt(CZ=CZ-SiPh(2)-CMe=CZ)(PMe(3))(2)] (8) and [Pt(CZ=CZ-SiPh(2)-CZ=CMe)(PMe(3))(2)] (9).     

Carbon-fluorine bond activation coupled with carbon-carbon bond formation at iridium. Confirmation of complete kinetic diastereoselectivity at the new carbon stereocenter by intramolecular trapping using vinyl as the migrating group

The iridium(perfluoropropyl)(vinyl) complex CpIr(PMe(3))(n-C(3)F(7))(CH=CH(2)) (5) has been prepared. It has been characterized by X-ray crystallography, and its ground state conformation in solution has been determined by (19)F{(1)H} HOESY NMR studies. It reacts with the weak acid lutidinium iodide to afford the eta(1)-allylic complex CpIr(PMe(3))((Z)-CH(2)CH=CFC(2)F(5))I (6), which has also been characterized crystallographically. The mechanism of C-F bond activation and C-C bond formation leading to 6 has been elucidated in detail by studying the reaction of 5 with lutidinium tetrakis[3,5-bis(trifluoromethyl)phenyl]borate [LutH(+)B(ArF)(4)(-)], containing a weakly coordinating counteranion. The main kinetic product of this reaction, determined by (19)F{(1)H} HOESY studies at -50 degrees C, is the endo-CpIr(PMe(3))(anti-eta(3)-CH(2)CHCFCF(2)CF(3))[B(ArF)(4)] diastereomer 9, along with a small amount of the exo-syn-isomer 8. Isomer 9 rearranges at -20 degrees C to its exo-anti isomer 7, and subsequently to the thermodynamically favored exo-syn-isomer 8, which has been isolated and crystallographically characterized. Complex 8 reacts with iodide to afford complex6. On the basis of the unambiguously defined kinetically controlled stereochemistry of 9 and 8, a detailed mechanism for the C-F activation/C-C coupling reaction is proposed, the principal conclusion of which is that C-F activation is completely diastereoselective.     

Catalytic and stoichiometric reactivity of β-silylamido agostic complex of Mo: intermediacy of a silanimine complex and applications to multicomponent coupling

The reaction of complex (ArN═)(2)Mo(PMe(3))(3) (Ar = 2,6-diisopropylphenyl) with PhSiH(3) gives the β-agostic NSi-H···M silyamido complex (ArN═)Mo(SiH(2)Ph)(PMe(3))(η(3)-ArN-SiHPh-H) (3) as the first product. 3 decomposes in the mother liquor to a mixture of hydride compounds, including complex {η(3)-SiH(Ph)-N(Ar)-SiHPh-H···}MoH(3)(PMe(3))(3) characterized by NMR. Compound 3 was obtained on preparative scale by reacting (ArN═)(2)Mo(PMe(3))(3) with 2 equiv of PhSiH(3) under N(2) purging and characterized by multinuclear NMR, IR, and X-ray diffraction. Analogous reaction of (Ar'N═)(2)Mo(PMe(3))(3) (Ar' = 2,6-dimethylphenyl) with PhSiH(3) affords the nonagostic silylamido derivative (Ar'N═)Mo(SiH(2)Ph)(PMe(3))(2)(NAr'{SiH(2)Ph}) (5) as the first product. 5 decomposes in the mother liquor to a mixture of {η(3)-PhHSi-N(Ar')-SiHPh-H···}MoH(3)(PMe(3))(3), (Ar'N═)Mo(H)(2)(PMe(3))(2)(η(2)-Ar'N═SiHPh), and other hydride species. Catalytic and stoichiometric reactivity of 3 was studied. Complex 3 undergoes exchange with its minor diastereomer 3' by an agostic bond-opening/closing mechanism. It also exchanges the classical silyl group with free silane by an associative mechanism which most likely includes dissociation of the Si-H agostic bond followed by the rate-determining silane σ-bond metathesis. However, labeling experiments suggest the possibility of an alternative (minor) pathway in this exchange including a silanimine intermediate. 3 was found to catalyze dehydrogenative coupling of silane, hydrosilylation of carbonyls and nitriles, and dehydrogenative silylation of alcohols and amines. Stoichiometric reactions of 3 with nitriles proceed via intermediate formation of η(2)-adducts (ArN═)Mo(PMe(3))(η(2)-ArN═SiHPh)(η(2)-N≡CR), followed by an unusual Si-N coupling to give (ArN═)Mo(PMe(3))(κ(2)-NAr-SiHPh-C(R)═N-). Reactions of 3 with carbonyls lead to η(2)-carbonyl adducts (ArN═)(2)Mo(O═CRR')(PMe(3)) which were independently prepared by reactions of (ArN═)(2)Mo(PMe(3))(3) with the corresponding carbonyl O═CRR'. In the case of reaction with benzaldehyde, the silanimine adduct (ArN═)Mo(PMe(3))(η(2)-ArN═SiHPh)(η(2)-O═CHPh) was observed by NMR. Reactions of complex 3 with olefins lead to products of Si(ag)-C coupling, (ArN═)Mo(Et)(PMe(3))(η(3)-NAr-SiHPh-CH═CH(2)) (17) and (ArN═)Mo(H)(PMe(3))(η(3)-NAr-SiHPh-CH═CHPh), for ethylene and styrene, respectively. The hydride complex (ArN═)Mo(H)(PMe(3))(η(3)-NAr-SiHPh-CH═CH(2)) was obtained from 17 by hydrogenation and reaction with PhSiH(3). Mechanistic studies of the latter process revealed an unusual dependence of the rate constant on phosphine concentration, which was explained by competition of two reaction pathways. Reaction of 17 with PhSiH(3) in the presence of BPh(3) leads to agostic complex (ArN═)Mo(SiH(2)Ph)(η(3)-NAr-Si(Et)Ph-H)(η(2)-CH(2)═CH(2)) (24) having the Et substituent at the agostic silicon. Mechanistic studies show that the Et group stems from hydrogenation of the vinyl substituent by silane. Reaction of 24 with PMe(3) gives the agostic complex (ArN═)Mo(SiH(2)Ph)(PMe(3))(η(3)-NAr-Si(Et)Ph-H), which slowly reacts with PhSiH(3) to furnish silylamide 3 and the hydrosilylation product PhEtSiH(2). A mechanism involving silane attack on the imido ligand was proposed to explain this transformation.     

Base induced P-C bond cleavage in a coordinated bis(dimethylphosphino)methane ligand

Treatment of fac-[Mn(CNR)(CO)3{(PMe2)2CH2}]ClO4 (1a R = Ph, R = tBu) with KOH produced the cleavage of one of the P-C bonds of the coordinated dmpm ligand, resulting in the formation of phosphine-phosphinite complexes fac-[Mn(PMe2O)(CNR)(CO)3(PMe3)] (2a,b). Alkoxides such as NaOMe and NaOEt promoted similar processes in 1a,b, yielding fac-[Mn(CNR)(CO)3(PMe3)(PMe2OR')]ClO4 (3a R = tBu, R' = Me; 3b R = Ph, R' = Me; 4a R = tBu, R' = Et; 4b R = Ph, R' = Et) derivatives. The phosphinite ligand in 2a, b can be sequentially protonated by addition of 0.5 and 1 equivalent of HBF4 leading to fac-[{Mn(CNR)(CO)3(PMe3)(PMe2O)}2H]BF4 (6a,b) and fac-[Mn(CNR)(CO)3(PMe3)(PMe2OH)]BF4 (5a,b), respectively.     

Reactivity of Mo(PMe3)6 towards benzothiophene and selenophenes: new pathways relevant to hydrodesulfurization

Mo(PMe(3))(6) cleaves a C-S bond of benzothiophene to give (kappa(2)-CHCHC(6)H(4)S)Mo(PMe(3))(4), which rapidly isomerizes to the olefin-thiophenolate and 1-metallacyclopropene-thiophenolate complexes, (kappa(1),eta(2)-CH(2)CHC(6)H(4)S)Mo(PMe(3))(3)(eta(2)-CH(2)PMe(2)) and (kappa(1),eta(2)-CH(2)CC(6)H(4)S)Mo(PMe(3))(4). The latter two molecules result from a series of hydrogen transfers and are differentiated according to whether the termini of the organic fragments coordinate as olefin or eta(2)-vinyl ligands, respectively. The reactions between Mo(PMe(3))(6) and selenophenes proceed differently from those of the corresponding thiophenes. For example, whereas Mo(PMe(3))(6) reacts with thiophene to give eta(5)-thiophene and butadiene-thiolate complexes, (eta(5)-C(4)H(4)S)Mo(PMe(3))(3) and (eta(5)-C(4)H(5)S)Mo(PMe(3))(2)(eta(2)-CH(2)PMe(2)), selenophene affords the metallacyclopentadiene complex [(kappa(2)-C(4)H(4))Mo(PMe(3))(3)(Se)](2)[Mo(PMe(3))(4)] in which the selenium has been completely abstracted from the selenophene moiety. Likewise, in addition to (kappa(1),eta(2)-CH(2)CC(6)H(4)Se)Mo(PMe(3))(4) and (kappa(1),eta(2)-CH(2)CHC(6)H(4)Se)Mo(PMe(3))(3)(eta(2)-CH(2)PMe(2)), which are counterparts of the species observed in the benzothiophene reaction, the reaction of Mo(PMe(3))(6) with benzoselenophene yields products resulting from C-C coupling, namely [kappa(2),eta(4)-Se(C(6)H(4))(CH)(4)(C(6)H(4))Se]Mo(PMe(3))(2) and [mu-Se(C(6)H(4))(CH)C(CH)(2)(C(6)H(4))](mu-Se)[Mo(PMe(3))(2)][Mo(PMe(3))(2)H].     

Tetraarylpentaborates, [B(5)O(6)Ar(4)](-) (Ar = C(6)H(4)OMe-4, C(6)H(3)Me(2)-2,6): their formation from the reaction of arylboronic acids with an aryloxorhodium complex,structure, and chemical properties

The reactions of (4-methoxyphenyl)boronic acid (1a) and of (2,6-dimethylphenyl)boronic acid (1b) with (PMe(3))(3)Rh-(OC(6)H(4)Me-4) (2) in a 5:1 molar ratio result in the formation of cationic rhodium complexes with new tetraarylpentaborates [Rh(PMe(3))(4)](+)[B(5)O(6)Ar(4)](-) (3a, Ar = C(6)H(4)OMe-4; 3b, Ar = C(6)H(3)Me(2)-2,6). The characterization of 3a is as follows: orthorhombic space group P2(1)2(1)2(1), a = 14.7600(5) A, b = 17.1675(5) A, c = 19.8654(5) A; V = 5033.7(3) A(3); Z = 4. The characterization of 3b is as follows: orthorhombic space group Pnma, a = 23.704(6) A, b = 17.254(8) A, c = 13.304(2) A; V = 5441(2) A(3); Z = 4. An intermediate complex, [Rh(PMe(3))(4)](+)[Ph(3)B(3)O(3)(OC(6)H(4)Me-4)](-) (4), was isolated from the reaction of phenylboroxine, (PhBO)(3), with 2. The tetraarylpentaborates smoothly undergo hydrolysis to give [Rh(PMe(3))(4)](+)[B(5)O(6)(OH)(4)](-) (5).     

Synthesis and X-ray crystal structure of an anionic heteronuclear metallamacrocyclic triangle

trans-[Pt(C[triple bond]C(Ar)C[triple bond]CH)2(PMe3)2](Ar = C(6)Me(4)-3,4,5,6) (1) reacts with PPN[Au(acac)(2)](Hacac = acetylacetone; 1 : 1.16 molar ratio; PPN = (Ph3P)2N) to give PPN[(Au[Pt(PMe3)2]2)(mu-Ar(C[triple bond]C)2)3] (2) the crystal structure of which showed the anions as quasi equilateral triangles stacked parallel to each other through C-HAu interactions, resulting in channels of rhombic cross-section.     

Oxidative addition of C-H bonds to RhCl(PMe3)3: relevant to the catalytic transformation of hydrocarbons

RhCl(PMe3)3 (1) reacts with benzene under irradiation to give the oxidative addition product, Rh(C6H5)(H)Cl(PMe3)3 (2). The reaction is promoted under CO2 atmosphere. The structure of 2 was fully characterized by X-ray crystallography as well as NMR, IR, and elemental analysis. The adduct (2) is unstable in solution even at room temperature to regenerate benzene and 1. The thermolysis of 2 under a CO atmosphere produces benzaldehyde along with the reductive elimination product, benzene. On the other hand, the prolonged photoreaction of 1 with benzene under CO2 resulted in the activation of the C-H bond and CO2 to yield Rh(C6H5)(eta2-CO3)(PMe3)3 (3).     

Oxidative cleavage of tetraaryltetraphosphane-1,4-diides by nickel(II) and palladium(II): formation of unusual Ni(0) and Pd(0) diaryldiphosphene complexes

[Na(2)(thf)(4)(P(4)Mes(4))] (1) (Mes = 2,4,6-Me(3)C(6)H(2)) reacts with one equivalent of [NiCl(2)(PEt(3))(2)], [NiCl(2)(PMe(2)Ph)(2)], [PdCl(2)(PBu(n)(3))(2)] or [PdCl(2)(PMe(2)Ph)(2)] to give the corresponding nickel(0) and palladium(0) dimesityldiphosphene complexes [Ni(eta(2)-P(2)Mes(2))(PEt(3))(2)] (2), [Ni(eta(2)-P(2)Mes(2))(PMe(2)Ph)(2)] (3), [Pd(eta(2)-P(2)Mes(2))(PBu(n)(3))(2)] (4) and [Pd(eta(2)-P(2)Mes(2))(PMe(2)Ph)(2)] (5), respectively, via a redox reaction. The molecular structures of the diphosphene complexes 2-5 are described.     

Mono(sulfido)-bridged mixed-valence nitrosyl complex: protonation and oxidative addition of iodine across the Ir(II)-Ir(0) bond

Treatment of [Cp*IrH(SH)(PMe3)] (Cp* = eta5-C5Me5) with [IrCl2(NO)(PPh3)2] in the presence of triethylamine yielded the sulfido-bridged Ir(II)Ir0 complex [Cp*Ir(PMe3)(mu-S)Ir(NO)(PPh3)], which further reacted with I2 and triflic acid to give the diiodo complex [Cp*Ir(PMe3)(mu-I)(mu-S)IrI(NO)(PPh3)] and the hydrido complex [Cp*Ir(PMe3)(mu-H)(mu-S)Ir(NO)(PPh3)][OSO2CF3], respectively.     

Carbon-carbon bond activation of R-CN (R = Me, Ar, iPr, tBu) using a cationic Rh(III) complex

Addition of 1.0 equiv of Ph3SiH to [Cp*(PMe3)Rh(Me)(CH2Cl2)]+BAr'4- (1) resulted in release of methane and quantitative formation of [Cp*(PMe3)Rh(SiPh3)(CH2Cl2)]+BAr'4- (2). Subsequent addition of 1.0 equiv of MeCN to 2 caused immediate displacement of dichloromethane to form the eta1-nitrile adduct [Cp*(PMe3)Rh(SiPh3)(NCMe)]+BAr'4- (3). Upon standing at room-temperature overnight, complex 3 converted quantitatively to another product which has been characterized as the C-C activation product, [Cp*(PMe3)Rh(Me)(CNSiPh3)]+BAr'4- (5). Addition of other nitrile substrates (R-CN, R = Ph, (4-CF3)Ph, (4-MeO)Ph, iPr, tBu) to 2 also resulted in C-C activation of the R-CN bond to form [Cp*(PMe3)Rh(R)(CNSiPh3)]+BAr'4-. Evidence for an eta2-iminoacyl intermediate complex, [Cp*(PMe3)Rh(eta2-C(R)=N(SiPh3)]+BAr'4-, is also presented.     

Sulfur-bridged early-late heterobimetallics synthesized by incorporation of titanium,vanadium, and molybdenum into bis(hydrosulfido) templates of group 9 metals

Reactions of the bis(hydrosulfido) complexes [Cp*Rh(SH)(2)(PMe(3))] (1a; Cp* = eta(5)-C(5)Me(5)) with [CpTiCl(3)] (Cp = eta(5)-C(5)H(5)) and [TiCl(4)(thf)(2)] in the presence of triethylamine led to the formation of the sulfido-bridged titanium-rhodium complexes [Cp*Rh(PMe(3))(micro(2)-S)(2)TiClCp] (2a) and [Cp*Rh(PMe(3))(micro2-S)(2)TiCl(2)] (3a), respectively. Complex 3a and its iridium analogue 3b were further converted into the bis(acetylacetonato) complexes [Cp*M(PMe(3))(micro(2)-S)(2)Ti(acac)(2)] (4a, M = Rh; 4b, M = Ir) upon treatment with acetylacetone. The hydrosulfido complexes 1a and [Cp*Ir(SH)(2)(PMe(3))] (1b) also reacted with [VCl(3)(thf)(3)] and [Mo(CO)(4)(nbd)] (nbd = 2,5-norbornadiene) to afford the cationic sulfido-bridged VM2 complexes [(Cp*M(PMe(3))(micro2-S)(2))2V](+) (5a(+), M = Rh; 5b(+), M = Ir) and the hydrosulfido-bridged MoM complexes [Cp*M(PMe(3))(micro2-SH)(2)Mo(CO)(4)] (6a, M = Rh; 6b, M = Ir), respectively.     

Insertion reactions of hydridonitrosyltetrakis(trimethylphosphine) tungsten(0)

[W(H)(NO)(PMe3)4] (1) was prepared by the reaction of [W(Cl)(NO)(PMe3)4] with NaBH4 in the presence of PMe3. The insertion of acetophenone, benzophenone and acetone into the W-H bond of 1 afforded the corresponding alkoxide complexes [W(NO)(PMe3)4(OCHR1R2)](R1 = R2 = Me (2); R1 = Me, R2 = Ph (3); R1 = R2 = Ph (4)), which were however thermally unstable. Insertion of CO2 into the W-H bond of yields the formato-O complex trans-W(NO)(OCHO)(PMe3)4 (5). Reaction of trans-W(NO)(H)(PMe3)4 with CO led to the formation of mer-W(CO)(NO)(H)(PMe3)3 (6) and not the formyl complex W(NO)(CHO)(PMe3)4. Insertion of Fe(CO)(5), Re2(CO)10 and Mn2(CO)10 into trans-W(NO)(H)(PMe3)4 resulted in the formation of trans-W(NO)(PMe3)4(mu-OCH)Fe(CO)4 (7), trans-W(NO)(PMe3)4(mu-OCH)Re2(CO)9 (8) and trans-W(NO)(PMe3)4(mu-OCH)Mn2(CO)9 (9). For Re2(CO)10, an equilibrium was established and the thermodynamic data of the equilibrium reaction have been determined by a variable-temperature NMR experiments (K(298K)= 104 L mol(-1), DeltaH=-37 kJ mol(-1), DeltaS =-86 J K(-1) mol(-1)). Both compounds 7 and 8 were separated in analytically pure form. Complex 9 decomposed slowly into some yet unidentified compounds at room temperature. Insertion of imines into the W-H bond of 1 was also additionally studied. For the reactions of the imines PhCH=NPh, Ph(Me)C=NPh, C6H5CH=NCH2C6H5, and (C6H5)2C=NH with only decomposition products were observed. However, the insertion of C10H7N=CHC6H5 into the W-H bond of led to loss of one PMe3 ligand and at the same time a strong agostic interaction (C17-H...W), which was followed by an oxidative addition of the C-H bond to the tungsten center giving the complex [W(NO)(H)(PMe3)3(C10H6NCH2Ph)] (10). The structures of compounds 1, 4, 7, 8 and 10 were studied by single-crystal X-ray diffraction.     

Synthesis and structural characterization of M(PMe3)3(O2CR)2(OH2)H2 (M = Mo, W): aqua-hydride complexes of molybdenum and tungsten

Mo(PMe(3))(6) and W(PMe(3))(4)(eta(2)-CH(2)PMe(2))H undergo oxidative addition of the O-H bond of RCO(2)H to yield sequentially M(PMe(3))(4)(eta(2)-O(2)CR)H and M(PMe(3))(3)(eta(2)-O(2)CR)(eta(1)-O(2)CR)H(2) (M = Mo and R = Ph, Bu(t); M = W and R = Bu(t)). One of the oxygen donors of the bidentate carboxylate ligand may be displaced by H(2)O to give rare examples of aqua-dihydride complexes, M(PMe(3))(3)(eta(1)-O(2)CR)(2)(OH(2))H(2), in which the coordinated water molecule is hydrogen-bonded to both carboxylate ligands.     

Effects of phosphine ligand chelation on the reactivity of monomeric parent amido ruthenium complexes: synthesis and reactivity of such a complex bearing monodentate ligands

The parent amido complex cis-(PMe(3))(4)Ru(H)(NH(2)) (2) has been prepared via the deprotonation of [cis-(PMe(3))(4)Ru(H)(NH(3))(+)][BPh(4)(-)]. The amido complex is a somewhat weaker base than the DMPE analogue trans-(DMPE)(2)Ru(H)(NH(2)) but is still basic enough to quantitatively deprotonate fluorene and reversibly deprotonate 1,3-cyclohexadiene and toluene. Complex 2 exhibits very labile phosphine ligands, two of which can be replaced by DMPE to yield the mixed complex cis-(PMe(3))(2)(DMPE)Ru(H)(NH(2)). Because of the ligand lability, 2 also undergoes hydrogenolysis and rapid exchange with labeled NH(3). The amide complex reacts with alkyl halides to yield E2 and S(N)2 products, along with ruthenium hydrido halide complexes including the ruthenium fluoride cis-(PMe(3))(4)Ru(H)(F). Ruthenium hydrido ammonia halide ion pair intermediates [cis-(PMe(3))(4)Ru(H)(NH(3))(+)][X(-)] are observed in some deprotonation and E2 reactions, and measurement of the equilibrium constants for NH(3) displacement from these complexes suggests that they benefit from significant hydrogen bonding between X(-) and NH(3) groups. Cumulenes also react with complex 2 to afford the products of insertion into an NH bond. The rates of neither these NH insertion reactions nor the reversible deprotonation reactions show any dependence on the concentration of PMe(3) present, suggesting that these reactions take place directly at the NH(2) group and do not involve precoordination of substrate to the metal center.     

Synthesis and reactivity of the monomeric late-transition-metal parent amido complex [Ir(Cp*)(PMe3)(Ph)(NH2)

The late-transition-metal parent amido compound [Ir(Cp*)(PMe3)(Ph)(NH2)] (2) has been synthesized by deprotonation of the corresponding ammine complex [Ir(Cp*)(PMe3)(Ph)(NH3)][OTf] (6) with KN(SiMe3)2. An X-ray structure determination has ascertained its monomeric nature. Proton-transfer studies indicate that 2 can successfully deprotonate p-nitrophenylacetonitrile, aniline, and phenol. Crystallographic analysis has revealed that the ion pair [Ir(Cp*)(PMe3)(Ph)(NH3)][OPh] (8) exists as a hydrogen-bonded dimer in the solid state. Reactions of 2 with isocyanates and carbodiimides lead to overall insertion of the heterocumulenes into the N--H bond of the Ir-bonded amido group, demonstrating the ability of 2 to act as an efficient nucleophile. Intriguing reactivity is observed when amide 2 reacts with CO or 2,6-dimethylphenyl isocyanide. eta4-Tetramethylfulvene complexes [Ir(eta4-C5Me4CH2)(PMe3)(Ph)(L)] (L=CO (15), CNC6H3-2,6-(CH3)2 (16)) are formed in solution through displacement of the amido group by the incoming ligand followed by deprotonation of a methyl group on the Cp* ring and liberation of ammonia. Conclusive evidence for the presence of the Ir-bonded eta4-tetramethylfulvene moiety in the solid state has been provided by an X-ray diffraction study of complex 16.     

The reactivity of Mo(PMe3)(6) towards heterocyclic nitrogen compounds: transformations relevant to hydrodenitrogenation

The reactions of Mo(PMe3)6 towards a variety of five- and six-membered heterocyclic nitrogen compounds (namely, pyrrole, indole, carbazole, pyridine, quinoline, and acridine) have been studied to provide structural models for the coordination of these heterocycles to the molybdenum centers of hydrodenitrogenation catalysts. Pyrrole reacts with Mo(PMe3)6 to yield the eta5-pyrrolyl derivative (eta5-pyr)Mo(PMe3)3H, while indole gives sequentially (eta1-indolyl)Mo(PMe3)4H, (eta5-indolyl)Mo(PMe3)3H, and (eta6-indolyl)Mo(PMe3)3H, with the latter representing the first example of a structurally characterized complex with an eta6-indolyl ligand. Likewise, carbazole reacts with Mo(PMe3)6 to give (eta6-carbazolyl)Mo(PMe3)3H with an eta6-carbazolyl ligand. The reactions of Mo(PMe3)6 with six-membered heterocyclic nitrogen compounds display interesting differences in the nature of the products. Thus, Mo(PMe3)6 reacts with pyridine to give an eta2-pyridyl derivative [eta2-(C5H4N)]Mo(PMe3)4H as a result of alpha-C-H bond cleavage, whereas quinoline and acridine give products of the type (eta6-ArH)Mo(PMe3)3 in which both ligands coordinate in an eta6-manner. For the reaction with quinoline, products with both carbocyclic and heterocyclic coordination modes are observed, namely [eta6-(C6)-quinoline]Mo(PMe3)3 and [eta6-(C5N)-quinoline]Mo(PMe3)3, whereas only carbocyclic coordination is observed for acridine.     

Preparation of tungsten alkyl alkylidene alkylidyne complexes and kinetic studies of their formation

An equilibrium mixture of alkyl alkylidyne W(CH2SiMe3)3(CSiMe3)(PMe3) (1a) and its bis(alkylidene) tautomer W(CH2SiMe3)2(=CHSiMe3)2(PMe3) (1b) has been found to undergo an alpha-hydrogen abstraction reaction in the presence of PMe3 to form alkyl alkylidene alkylidyne W(CH2SiMe3)(=CHSiMe3)(CSiMe3)(PMe3)2 (2). In the presence of PMe3, the formation of 2 follows first-order kinetics, and the observed rate constant was found to be independent of the concentration of PMe3. The activation parameters for the formation of 2 are Delta H = 28.3(1.7) kcal/mol and Delta S = 3(5) eu. In the presence of PMe2Ph, an equilibrium mixture of W(CH2SiMe3)3(CSiMe3)(PMe2Ph) (3a) and its bis(alkylidene) tautomer W(CH2SiMe3)2(=CHSiMe3)2(PMe2Ph) (3b) was similarly converted to W(CH2SiMe3)(=CHSiMe3)(CSiMe3)(PMe2Ph)2 (4). The observed rate of this reaction was also independent of the concentration of PMe2Ph. These observations suggest a pathway in which the tautomeric mixtures 1a,b and 3a,b undergo rate-determining, alpha-hydrogen abstraction, followed by phosphine coordination, resulting in the formation of the alkyl alkylidene alkylidyne complexes 2 and 4.