高分子自组装Mn2O3花瓣状纳米带、纳米线的研究

通过控制热处理工艺条件, 利用Mn(CH3COO)2和具有特殊空间构型的聚乙烯醇(PVA), 在600 ℃合成了类花瓣状Mn2O3纳米带和纳米线结构. SEM, XRD表征分析证明Mn2O3纳米带结构为方铁锰矿晶型结构, 沿(222)方向择优生长. 分析了热处理工艺对一维纳米结构的影响机制. 初步探讨了Mn2O3一维纳米结构的生长机理.     

静电纺丝技术制备Y2O3:Eu3+纳米带及其发光性质

采用静电纺丝技术制备了PVP/[Y(NO3)3+Eu(NO3)3]复合纳米带,将其进行热处理,获得了Y2O3:Eu3+纳米带.采用XRD、FTIR、SEM、TEM、荧光光谱等技术对焙烧后的样品进行了表征.结果表明:600℃焙烧即可获得Y2O3:Eu3+纳米带,800 ℃时结晶更为良好,产物属于立方晶系.纳米带表面光滑,由平均直径为30 nm的小颗粒紧密排列而成,为多品结构.随着温度升高,纳米带宽度减小.焙烧800 ℃获得的Y2O3:Eu3+纳米带的发光性质优于焙烧600℃的Y2O3:Eu3+纳米带.与体材料相比,该纳米带的激发光谱Eu3+-O2-电荷迁移态(CTB)发生红移,发射光谱发生蓝移.     

纳米α-PbO粉体改性MnO_2的循环伏安行为

探讨了固相合成的纳米α-Pb O粉体样品及其改性 Mn O2 电极的循环伏安行为 .结果表明 ,纳米α-Pb O在碱性电解液中具有优良电化学活性 .铅的掺入改变了 Mn O2 的充放电机理 .在其循环扫描过程中 ,掺杂物与 Mn O2 均不再以单纯氧化物的形式存在 ,而是形成了一系列 Pb( X) ( X=0 , ) Mn( Y) ( Y= , , )复合物的共氧化与共还原 ,抑制了电化学惰性物质 Mn3 O4的生成和积累 ,使 Mn O2 的可逆性得到了明显改善 .纳米α-Pb O样品与普通粒径的α-Pb O样品对 Mn O2 的改性机理类似 .但前者对 Mn O2 的改性效果明显优于后者 .     

TiO_2(B)纳米带光催化剂的制备及分解水产氢性能

经过钛酸四丁酯强碱溶液中水解→水热→质子交换→焙烧路线制备出Ti O2(B)纳米带.采用HRTEM、FESEM、XRD、UV-Vis、BET和光解水产氢反应等对催化材料的微观表面结构、光吸收性能以及光催化性能进行了研究.结果表明:该路线制备的Ti O2(B)纳米带反应条件温和,便于大批量合成.通过改变实验参数实现晶型结构和微观形貌的调变,且不同晶型结构和微观形貌的材料进行光催化分解水产氢活性对比,它们的活性顺序为:NaxH2-xTi3O7·n H2纳米管Ti O2(B)Ti O2(anatase)Na2Ti6O13,表明Ti O2(B)纳米带是一类较好的光催化分解水制氢半导体材料.提出了Ti O2(B)纳米带的可能经历了Na2Ti3O7→H2Ti3O7→H2Ti6O13→H2Ti12O25→Ti O2(B)的形成过程.     

CaSiO3∶Pb,Mn荧光粉的ZnO∶Al包覆研究

以Zn(NO3)2•6H2O和AlCl3•6H2O为原料, 借助CO(NH2)2的水解反应, 采用化学均相共沉淀方法和热处理工艺, 在自制CaSiO3∶Pb, Mn红色荧光粉表面包覆ZnO∶Al, 形成透明导电层. 运用数字万用表和自制测量盒对粉体的电阻率进行测量, 比较了包覆率n(Zn)/n(Ca)、n(Al)/n(Zn), 热处理温度和热处理时间对粉体电阻率的影响; 优化出包覆条件和热处理条件: n(Zn)/n(Ca)=10%, n(Al)/n(Zn)=5%, 75 ℃水解1.5 h, 500 ℃热处理45 min. 对包覆样品进行了室温光致荧光(PL)测量, X射线衍射(XRD)结构分析和透射电子显微镜(TEM)形貌观察. 结果显示, 当n(Zn)/n(Ca)=10%时, 在CaSiO3∶Pb, Mn荧光粉表面形成了连续的ZnO∶Al敷膜, 荧光粉的电阻率明显降低, 并且保持了良好的光致发光性质.     

一维ZnO表面可控构建Co3Mn1纳米晶及其催化CO氧化性能

利用热分解法制备了结构明确的负载型纳米晶催化剂。在纳米晶成核和生长过程中加入一维Zn O纳米棒作为晶种,调控不同组分的纳米晶在Zn O纳米棒表面均匀生长,从而获得了结构明确的Mn O/Zn O、Co₃O₄/Zn O、Co₃Mn₁/Zn O催化剂。透射电子显微镜(TEM)与X射线粉末衍射(XRD)结果显示,不同组分纳米颗粒都均匀分散在Zn O纳米棒表面。相对于Mn O/Zn O和Co₃O₄/Zn O催化剂,Co₃Mn₁/Zn O催化剂在CO氧化反应中具有最佳的催化性能。在200 L·g^-1_cat·h^-1的气时空速下,Co₃Mn₁/Zn O催化剂起活温度为50℃,其T₁₀₀(CO转化率达到100%时的温度)为200℃;利用X射线光电子能谱(XPS)对不同催化剂进行了分析,结果显示,Co<...     

Mn3O4多面体纳米晶体的制备及其电化学性能

通过对未加添加剂的醋酸锰-乙醇体系的一种简易的水基热解过程,制备了Mn3O4多面体纳米晶体。借助X射线衍射仪(XRD)、扫描电子显微镜(SEM)、透射电子显微镜(TEM)、傅里叶变换红外光谱法(FTIR)、拉曼光谱和X-射线光电子能谱(XPS)等对Mn3O4的结构和形貌进行了表征。提出了Mn3O4多面体纳米晶体的形成机理。循环伏安法(CV)测试结果表明,所制得的Mn3O4电极呈现良好的赝电容性能。在扫描速率为5 mV.s-1时,得到了Mn3O4的最大比电容值173 F.g-1。     

纳米化Fe2O3粉体的制备与表征

采用分析纯FeCl3·6H2O和NH3·H2O为主要原料,以均匀沉淀法制备了Fe2O3纳米粉体.通过X射线衍射(XRD)、红外光谱(IR)、扫描电子显微镜(SEM)及差热分析(DTA)等手段研究了热处理温度、分散剂、反应pH值对Fe2O3相变、结构、形貌及纳米属性的影响.结果表明:纳米化增大了Fe2O3的表面能,γ-Fe2O3转变为α-Fe2O3的温度仅为238.2 ℃,比常规粉体降低了约312 ℃;由于量子尺寸效应和表面效应,使用分散剂后α-Fe2O3纳米粉体的分散性、均匀性得到改善,粒径下降,Fe-O键伸缩及弯曲振动IR吸收频率发生蓝移;尤其是硬脂酸钠分散后α-Fe2O3的Fe-O伸缩、弯曲振动吸收频率分别蓝移11.57、10.93 cm-1;获得了液相均匀沉淀法制备Fe(OH)3纳米粉体的最佳工艺条件.     

纳米晶Y_2O_3∶Eu~(3+)的合成及其热分析动力学

以Y(NO3)3、Eu2O3、CO(NH2)2为原料,使用超声波作用下的均匀沉淀法合成了纳米晶荧光粉Y2O3∶Eu3+。利用不同升温速率的热重及差热分析研究了纳米晶Y2O3∶Eu3+的合成动力学及晶粒生长动力学。研究表明,纳米晶Y2O3∶Eu3+的前驱体分解过程可分为3个步骤,利用Doyle-Ozawa法和Kissinger法分别计算了各个反应阶段的表观活化能,用Kissinger法确定每个反应阶段的反应级数和频率因子,并给出了各个阶段的动力学方程。根据晶粒生长动力学理论计算纳米荧光粉Y2O3∶Eu3+晶粒生长活化能为17.80kJ·mol-1,表明热处理过程中纳米晶粒的长大为扩散生长机制。     

Mn_3O_4/氧化石墨烯纳米复合物的制备及其超级电容性能

利用锰前驱体与氧化石墨烯(GO)原位反应制备了Mn3O4/GO纳米复合物超级电容器电极材料;采用扫描电镜、透射电镜及X射线衍射仪分析了纳米复合物的形貌和结构;并利用交流阻抗分析及充放电测试测定了纳米复合材料的电化学性质和电容性质.结果表明,引入氧化石墨烯可增强纳米复合物的导电性及稳定性,提高Mn3O4的电容特性,从而使得纳米复合物具有较高的比电容(350F/g)和较长的循环寿命(超过1 000次).     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

A general and convenient synthesis of 4-(tosylmethyl)semicarbazones and their use in amidoalkylation of hydrogen,heteroatom, and carbon nucleophiles

A general synthesis of previously unknown semicarbazone-based α-amidoalkylating reagents, 4-(tosylmethyl)semicarbazones, has been developed. The synthesis involved three-component condensation of semicarbazones of aliphatic or aromatic aldehydes with the same or other aldehydes and p-toluenesulfinic acid. The scope and limitations of this reaction were investigated. The compounds obtained were demonstrated to be an efficient α-(4-semicarbazono)alkylating agents. They were reacted with H- (sodium borohydride), O- (sodium methylate), S- (sodium phenylthiolate), N- (pyrrolidine, sodium succinimide), P- (trialkyl phosphites), and C-nucleophiles (sodium diethyl malonate) to give the corresponding products of the tosyl group substitution, 4-substituted semicarbazones, including analogues of nitrofurazone. Among the prepared compounds tested in vitro for antibacterial and antifungal activity, three nitrofuryl-containing semicarbazones exhibited high biological activities with minimum inhibitory concentration (MIC) values of 8–32 μg/mL.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Synthesis of novel chiral bidentate hydroxyalkyl-N-heterocyclic carbene ligands and their application in palladium-catalyzed Mizoroki–Heck couplings and asymmetric addition of diethylzinc to benzaldehyde

A small library of new chiral bidentate hydroxyalkyl-imidazolium salts 1 is conveniently synthesized on multi-gram scale from inexpensive and commercially available chiral pool amino acids. The corresponding carbenes, generated by deprotonation of imidazolium salts 1, in combination with palladium(II) chloride were tested in the Mizoroki–Heck coupling reaction. The most significant results in terms of yields and reactivities were achieved with low catalyst loading. The catalytic activities of these imidazolium salts were also investigated in the asymmetric addition of diethylzinc to benzaldehyde. The use of MgO nanoparticles as an additive in conjunction with these ligands played a crucial role in increasing the efficiency of these reactions.