CE- and HPLC-TOF-MS for the characterization of phenolic compounds in olive oil

We present an easy and rapid method for the analysis of phenolic compounds in extra-virgin olive oil by CZE coupled with ESI-TOF-MS. Optimum electrophoretic separation was obtained using a basic carbonate electrolyte. We thus achieved the determination of several important families (phenyl alcohols, phenyl acids, lignans, flavonoids, and secoiridoids) of the polar fraction of the olive oil. Furthermore, other "unknown" compounds were also identified. In addition to the CZE method, HPLC analyses were made, separating compounds belonging to the main families present in this polyphenolic fraction, as well as other new compounds. We compared the results obtained with both techniques and found it was possible to determine more than 45 compounds with both methods. The sensitivity, together with mass accuracy and true isotopic pattern of the TOF-MS, allowed the identification of a broad series of known and so far not described phenolic compounds present in extra-virgin olive oil.     

Separation of aromatic sulphonic acids by CZE in coated and non‐coated capillaries

Capillary zone electrophoresis (CZE), besides ion‐pairing mode HPLC and salting‐out HPLC, is well‐suited for the analysis of aromatic sulphonic acids widely used as intermediates in the production of synthetic dyes and optical brighteners. The separation selectivity in CZE of many aromatic acids, including positional isomers, can be controlled by the type and concentration of a cyclodextrin additive. The influence of the concentration of β‐cyclodextrin in the working electrolyte on the separation of the positional isomers of naphthalene (poly‐)sulphonic acids, and their amino‐ and hydroxy derivatives, by CZE was studied, both in non‐coated fused silica capillaries and in capillaries coated with polyacrylamide. The migration time scale was calibrated using 4‐alkylbenzenesulphonic acids as the calibration standards. Limiting mobilities of the free acid anions and of their complexes with β‐cyclodextrin were calculated and the effect of the inclusion guest‐host complex formation on the CZE separation was quantitatively characterized. The migration order in coated capillaries is reversed with respect to CZE in non‐coated fused silica capillaries, the separation selectivity is different and the separation of polysulphonic acids such as naphthalene tri‐ and tetrasulphonic acids is significantly accelerated.     

Separation of diastereomers of phosphinic pseudopeptides by capillary zone electrophoresis and reverse phase high‐performance liquid chromatography

Capillary zone electrophoresis (CZE) and reverse phase high‐performance liquid chromatography (RP‐HPLC) were used for separation of diastereomers of phosphinic pseudopeptides in achiral separation media. A set of phosphinic pseudopeptides, i. e. peptides with one peptide bond substituted by phosphinic acid moiety ‐PO₂^–‐CH₂‐ derived from the structure N‐Ac‐Val‐AlaB(‐CH₂)Leu‐His‐NH₂ synthesized as a mixture of four diastereomers was used. Separations of diastereomers by CZE were carried out in Tris‐phosphate background electrolytes in the pH range 1.1–3.2 and at least partial separation of the four diastereomers of each pseudopeptide was achieved. A routinely used RP‐HPLC method (C₁₈‐silica column and water/acetonitrile/trifluoroacetic acid mobile phase) was also capable of resolving the diastereomers. In addition, since individual diastereomers of majority of the pseudopeptides were isolated by RP‐HPLC it was possible to check the purity of these RP‐HPLC separated diastereomers and to compare the migration order of the diastereomers in CZE with their elution order in RP‐HPLC. The results obtained by CZE and RP‐HPLC demonstrate a complementarity of both methods in analysis and separation of phosphinic pseudopeptides including their diastereomers.     

Use of capillary electrophoresis in drug quality assessment of synthetic porcine secretin

The purity profile for porcine secretin attributable to contamination by equilibrium products such as aspartoyl(3) secretin has been shown to be dependent on the pH of the analytical system. Capillary zone electrophoresis (CZE) methods have been developed for the efficient separation of synthetic porcine secretin, its equilibrium products and other impurities in aqueous solutions at both acidic and alkaline pH. These conditions are more representative of those used for the reconstitution and administration of porcine secretin, and good results cannot be achieved using HPLC due to poor peak shape above pH 5.8. The influence of various CZE operational parameters was systematically examined. The methods were validated for accuracy, precision, linearity, LOD and LOQ. A comparative evaluation of the stability of test solutions was determined using CZE and HPLC over a range of pH values. HPLC and CZE methods produced similar results at low pH.     

Theoretical models of separation selectivity for charged compounds in micellar electrokinetic chromatography

Equations and theoretical models for MEKC separation selectivity (α(MEKC) ) were established to explain a change in separation and electrophoretic mobility order of fully charged analytes, in which α(MEKC) is related to the dimensionless values of mobility selectivity in CZE (α(CZE)) and retention selectivity (α(k)) in MEKC, and where α(CZE) and α(k) are defined as the ratio of electrophoretic mobility in CZE and the ratio of retention factor (k) in MEKC for two charged analytes, respectively. Using four alkylparabens as test analytes, excellent agreement was found between the observed α(MEKC) and the proposed α(MEKC) models of test analytes in MEKC over a wide range of SDS concentrations and values of k. For example, in comparison with CZE separation of charged analytes, MEKC separation can enhance separation selectivity up to the maximum value when the selectivity ratio (ρ) is greater than 1.0 (ρ=α(k)/α(CZE)), while lower separation selectivity is obtained with ρ<1.0 (α(CZE) >α(k) >1).     

Capillary electrophoresis for the analysis of paralytic shellfish poisoning toxins in shellfish: Comparison of detection methods

Paralytic shellfish toxins (PSTs) are produced by marine and freshwater microalgae and accumulate in shellfish including mussels, oysters, and scallops, causing possible fatalities when inadvertently consumed. Monitoring of PST content of shellfish is therefore important for food safety, with currently approved methods based on HPLC, using pre‐ or postcolumn oxidation for fluorescence detection (HPLC‐FLD). CE is an attractive alternative for screening and detection of PSTs as it is compatible with miniaturization and could be implemented in portable instrumentation for on‐site monitoring. In this study, CE methods were developed for C⁴D, FLD, UV absorption detection, and MS—making this first report of C⁴D and FLD for PSTs detection. Because most oxidized toxins are neutral, MEKC was used in combination with FLD. The developed CZE‐UV and CZE‐C⁴D methods provide better resolution, selectivity, and separation efficiency compared to CZE‐MS and MEKC‐FLD. The sensitivity of the CZE‐C⁴D and MEKC‐FLD methods was superior to UV and MS, with LOD values ranging from 140 to 715 ng/mL for CZE‐C⁴D and 60.9 to 104 ng/mL for MEKC‐FLD. With the regulatory limit for shellfish samples of 800 ng/mL, the CZE‐C⁴D and MEKC‐FLD methods were evaluated for the screening and detection of PSTs in shellfish samples. While the CZE‐C⁴D method suffered from significant interferences from the shellfish matrix, MEKC‐FLD was successfully used for PST screening of a periodate‐oxidized mussel sample, with results confirmed by HPLC‐FLD. This confirms the potential of MEKC‐FLD for screening of PSTs in shellfish samples.     

Separation and analysis of cis-diol-containing compounds by boronate affinity-assisted micellar electrokinetic chromatography

Cis-diol-containing compounds (CDCCs) are usually highly hydrophilic compounds and are therefore difficult to separate by conventional reversed-phase-based micellar electrokinetic chromatography (MEKC) due to poor selectivity. Here, we report a new method, called boronate affinity-assisted micellar electrokinetic chromatography (BAA-MEKC), to solve this issue. A boronic acid with a hydrophobic alkyl chain was added to the background electrolyte, which acted as a modifier to adjust the selectivity. CDCCs can covalently react with the boronic acid to form negatively charged surfactant-like complexes, which can partition into micelles formed with a cationic surfactant. Thus, CDCCs can be separated according to the differential partition constants of their boronic acid complexes between the micellar phase and the surrounding aqueous phase. To verify this method, eight nucleosides were employed as the test compounds and their separation confirmed that the combination of boronate affinity interaction with MEKC can effectively enhance the separation of CDCCs. The effects of experimental conditions on the separation were investigated. Finally, the BAA-MEKC method was applied to the separation and analysis of nucleosides extracted from human urine. BAA-MEKC exhibited better selectivity and improved separation as compared with conventional MEKC and CZE. Successful quantitative analysis of urinary nucleosides by BAA-MEKC was demonstrated.     

Separation of selected peptides by capillary electroendoosmotic chromatography using 3 microns reversed-phase bonded silica and mixed-mode phases.

The retention behaviour and selectivity of selected basic, neutral and acidic peptides have been studied by capillary electroendoosmotic chromatography (CEC) with Hypersil C8, C18, Hypersil mixed-mode, and Spherisorb C18/SCX columns, 250 (335) mm x 100 microns, packed with 3 microns particles, and eluted with mobile phases composed of acetonitrile-triethylamine-phosphoric acid (TEAP) at pH 3.0 using a Hewlett-Packard Model HP3DCE capillary electrophoresis system. The selected peptides were desmopressin (D), two analogues (A and B) of desmopressin, oxytocin (O) and carbetocin (C). The peptides eluted either before or after the electroendoosmotic flow (EOF) marker, depending on the concentration of acetonitrile used and the buffer ionic strength. The retention and selectivity of these peptides under CEC conditions were compared to their behaviour in free zone capillary electrophoresis (CZE), where the separation mode was based on the electrophoretic migration of the analytes due to their charge and Stokes radius properties. In addition, their retention behaviour in RP-HPLC was also examined. As a result, it can be concluded that the elution process of this group of synthetic peptides in CEC with a TEAP buffer at pH 3.0 is mediated by a combination of both electrophoretic migration processes and retention mechanisms involving hydrophobic as well as silanophilic interactions. This CEC method when operated with these 3 microns reversed-phase and mixed-mode sorbents with peptides is thus a hybrid of two well-known analytical methods, namely CZE and RP-HPLC. However, the retention behaviour and selectivity of the selected peptides differs significantly in the CEC mode compared to the RP-HPLC or CZE modes. Therefore this CEC method with these peptides represents an orthogonal analytical separation procedure that is complimentary to both of these alternative techniques.     

A capillary zone electrophoretic method for the study of formation of a covalent conjugate between microcystin LR and protein phosphatase 2A

The study of conjugate formation between microcystin (MCYST)-LR and protein phosphatase (PP) 2A, which was isolated from bovine kidney and mouse brain, was achieved by using a highly efficient capillary zone electrophoretic (CZE) separation method. The MCYST-LR-PP2A conjugate (from bovine kidney) was resolved from its precursor after just 15 min of incubation. Moreover, the migration time, and, hence, the total analysis time, was less than 5 min. While the present findings of the time lag between conjugate formation and full inhibition are not novel, the CZE method does provide an alternative tool to HPLC with a higher separation efficiency to yield data for kinetic and mechanistic studies of the enzyme-toxin interaction. The CZE data reported here were found not to be adequately described by a first-order kinetic model. Moreover, the CZE method, which involves the use of a low ionic strength aqueous buffer, does not suffer from the drawback of the use of denaturing organic solvents such as those used in HPLC.     

Hollow-fiber flow field-flow fractionation: a gentle separation method for mass spectrometry of native proteins

Low-impact ionization sources like electrospray ionization (ESI) and matrix-assisted, laser desorption/ionization (MALDI) equipped with time-of-flight (TOF) mass analyzers provide intact protein analysis over a very wide molar mass range. ESI/TOFMS provides also indications on the higher-order structure of intact proteins and non-covalent protein complexes. However, direct analysis of intact proteins mixtures in real samples shows limited success, mainly because spectra become very complex to interpret. This is also due to sample contaminants, and to the mechanism of competitive ionization in ESI or MALDI. Rapid and efficient sample clean-up and separation methods can significantly enhance the power of TOFMS for intact protein analysis. However, if protein native conditions want to be maintained, the methods should affect neither the three-dimensional structure nor the non-covalent chemistry of the proteins. Reversed-phase (RP) HPLC, size-exclusion chromatography (SEC), and capillary zone electrophoresis (CZE) are on-line or off-line coupled to ESI/TOFMS or MALDI/TOFMS. In fact, these separation methods often show limitations when applied to the analysis of native proteins. Organic modifiers and saline buffers are required in the case of RP HPLC or CZE. They can induce protein degradation or affect ionization when MS is performed after separation. High voltages used in CZE can contribute to alter proteins from their native form. In the case of high molar mass proteins, SEC is scarcely selective, and barely able to detect protein aggregates. Sample entanglement/adsorption on the stationary phase can also occur.     

Comparison of CZE, open-tubular CEC and non-aqueous CE coupled to electrospray MS for impurity profiling of drugs

Open-tubular CEC and non-aqueous CE (NACE) methods were developed for the analysis of six pharmaceutical compounds and their respective process-related impurities, comprising 22 analytes in total with a range of functional groups and lipophilicities. These methods were assessed for orthogonality of analyte separation with respect to existing CZE-ESI-MS and HPLC-ESI-MS methods, in order to complement a generic analytical strategy for impurity profiling of pharmaceutical compounds. Open-tubular CEC, using etched and chemically modified capillaries, induced weak reversed-phase-type interactions between some of the analytes and the bonded phases (0.811相似文献   

Determination of lignans in flaxseed using liquid chromatography with time-of-flight mass spectrometry

A new method of flaxseed-derived lignan determination was developed using HPLC with high-resolution time-of-flight MS (TOF-MS), optimized, and compared to two existing methods (HPLC/MS/MS and GC/MS). The limits of detection (LODs) for HPLC/TOF-MS (0.002–0.043 pg) were comparable with those of the optimized and improved HPLC/MS/MS (0.001–0.015 pg), whereas the LODs for the optimized GC/MS were higher (0.02–3.0 pg, yet lower than reported before). Using the newly developed detection and separation methods, several key flaxseed sample preparation parameters (including extraction, hydrolysis, and sample purification) were evaluated resulting in the development of efficient protocol for lignan quantification from flaxseed hulls and embryos. The results confirmed the importance of quantification of both aglycones and unhydrolyzed glucosides in order to obtain the total lignan estimates.     

Determination of tobacco-specific N-nitrosamines in rabbit serum by capillary zone electrophoresis and capillary electrophoresis-electrospray ionization-mass spectrometry with solid-phase extraction

In this paper, we propose a new strategy for separation and determination of tobacco-specific N-nitrosamines (TSNAs), a group of strong carcinogens found only in tobacco products, by using CZE and CE-MS associated with SPE. Six TSNAs: N'-nitrosonornicotine, N'-nitrosoanatabine, N'-nitrosoanabasine, 4-(methylnitrosamino)-1-(3-pyridyl)-1-butanone, 4-(methylnitrosamino)-1-(3-pyridyl)-1-butanol, and 4-(methylnitrosamino)-4-(3-pyridyl)-1-butanol were simultaneously separated by either of two CZE methods, one of which worked with ammonium formate buffer (pH 2.5) and another with citrate buffer (pH 2.4), as well as a CE-MS method. The CZE conditions including pH and concentration of running buffer, capillary length, applied voltage, and capillary temperature were systematically optimized. For CE-MS method, an optimized sheath liquid consisted of methanol-water was used at a flow rate of 10 muL/min. With SPE procedure, our proposed CE-MS method was successfully applied to determine TSNAs after 15 min metabolism in rabbits. A comparison study between CZE and CE-MS methods for quantitative purposes was carried out, showing that both methods provided similar separation efficiency, selectivity, repeatability, linearity, and recovery. However, CE-MS method was better suited for the analysis of TSNAs in complicated biological samples for its sensitivity and extra information on molecular structure. Having good accordance with our previous work by using LC-MS, the new CE-MS method is expected to be an alternative to the LC-MS method and applied to study the metabolism of TSNAs.     

Oil-In-Water Microemulsion LC Determination of Pharmaceuticals Using Gradient Elution

Efficient and novel oil-in-water microemulsion HPLC (MELC) separations of a range of solutes have been performed on conventional reversed-phase HPLC columns using gradient elution. This work follows previous successful separations using isocratic oil-in-water MELC [1]. It was found that by changing certain variables, peak-peak resolution, separation selectivity, efficiency and solute retention could be manipulated. The method was compatible with very low UV detection wavelengths. A robust separation method was developed for the quantitative analysis of 2 steroids in a combination-inhaled product for asthma. The method offered similar chromatography and run time when compared with conventional HPLC modes, thus demonstrating its potential for routine use. Stability-indicating methods were developed to separate synthetic and degradative impurities from the main component peaks in 4 pharmaceutical products. The methods offered quicker analysis times and equivalent selectivity to conventional HPLC modes. In developing the separations the effect on the chromatography of varying the operating parameters was studied.     

Dual-opposite-injection CZE: theoretical aspects and application to organic and pharmaceutical compounds

Several important figures of merit (migration time, efficiency, resolution, resolution per unit time, and electrophoretic selectivity) are quantitatively compared for the first time for conventional CZE and dual-opposite-injection CZE (DOI-CZE). Aspects of DOI-CZE relevant to the separation of organic and pharmaceutical ions (MW>120 Da) are also discussed. Two new approaches to resolve the codetection of anions and cations, hydrodynamic flow-modified DOI-CZE and polarity reversal in combination with asymmetric detector window positioning, are compared with the method of preliminary transport, a variable procedure within sequential sample introduction, using a six-component sample of organic and pharmaceutical compounds. The advantages of DOI-CZE for the simultaneous analysis of organic/pharmaceutical anions and cations are illustrated in a direct comparison of conventional CZE and DOI-CZE for the separation of a ten-component mixture of pharmaceutical ions (five ionized acids and five ionized bases).     

Determination of ciprofloxacin and its impurities by capillary zone electrophoresis

Capillary zone electrophoresis (CZE) has been elaborated for separation, identification and determination of ciprofloxacin and its impurities. The separation, phosphate buffer pH 6.0 was supplemented with 0.075 M pentane-1-sulfonic acid sodium salt. The elaborated method was validated. The selectivity, linearity, limits of detection (LOD) and quantification (LOQ), precision, and accuracy of capillary zone electrophoresis were evaluated. The results obtained by CZE were also compared with those obtained by liquid chromatography. Regarding the validation results the CE method fulfils the current European Pharmacopoeia (Eur. Ph.) requirements. The evaluated CE method could be applicable to the analysis of different medicinal products containing ciprofloxacin.     

Rapid determination of 5-hydroxymethylfurfural by DART ionization with time-of-flight mass spectrometry

DART (direct analysis in real time), a novel technique with wide potential for rapid screening analysis, coupled with high-resolution time-of-flight mass spectrometry (TOF-MS) has been used for quantitative analysis of 5-hydroxymethylfurfural (5-HMF), a typical temperature marker of food. The DART/TOF-MS method was optimised and validated. Quantification of 5-HMF was achieved by use of a stable isotope-labelled 5-HMF standard prepared from glucose. Formation of 5-HMF from saccharides, a potential source of overestimation of results, was evaluated. Forty-four real samples (honey and caramelised condensed sweetened milk) and 50 model samples of heated honey were analysed. The possibility of using DART for analysis of heated samples of honey was confirmed. HPLC and DART/TOF-MS methods for determination of 5-HMF were compared. The correlation equation between these methods was DART?=?1.0287HPLC?+?0.21340, R ²?=?0.9557. The DART/TOF-MS method has been proved to enable efficient and rapid determination of 5-HMF in a variety of food matrices, for example honey and caramel.     

Analysis of the glucosinolate pattern of Arabidopsis thaliana seeds by capillary zone electrophoresis coupled to electrospray ionization-mass spectrometry

An easy and rapid method for the analysis of intact, non-desulfated glucosinolates by capillary zone electrophoresis (CZE) coupled to electrospray ionization-time of flight-mass spectrometry (ESI-TOF-MS) is described. Surprisingly, an electrolyte and a sheath liquid based on formic acid provided the best results. In this strongly acidic system, the glucosinolates were separated and detected as anions, resulting in an excellent selectivity. Thus, crude plant extracts could be analyzed without any interference of matrix constituents. The sensitivity together with mass accuracy and true isotopic pattern of the TOF-MS allowed identification of a broad series of glucosinolates in Arabidopsis thaliana seeds.     

Determination of aristolochic acid by capillary zone electrophoresis

A simple and rapid capillary zone electrophoresis (CZE) method for the determination of aristolochic acid (AA) in dietary supplements and selected herbs is described. A clear separation of AA from other sample constituents was achieved within 5 minutes without any sample clean up. A mixture of 20 mM-morpholinethanesulphonic acid+10 mM-BisTrisPropane+0.2% hydroxyethylcelullose in 10% methanol serves as a background electrolyte. The linearity, accuracy, intra-assay and detection limit of the developed method are 200–6000 ng/mL, 95–103%, 3.5%, and 50 ng/ml, respectively. Ease of use, sufficient sensitivity and low running cost are the most important attributes of the CZE method. The proposed CZE method was compared with HPLC.     

Radiochemical analysis of the polar agrochemicals validamycin and the metabolite melamine by ion-exchange chromatography

Suitable analytical methods to determine the radiochemical purity of validamycin and melamine are not described in the literature. High performance ion-exchange chromatography for the detection of underivatized validamycin and melamine has been proposed. The compounds were separated on HPLC using a styrene-divinylbenzene copolymer based cation-exchanger. For the separation of validamycin a resin in the hydrogen-form has given a good separation and for melamine in the Na⁺-form. For the first time an ion-exchange separation of validamycin is described allowing the separation of at least four components of commercial validamycin: validamycin A, validamycin B or G, validoxylamine A and validoxylamine B or G without prior derivatization. The methods were applied to determine the radiochemical purity of ¹⁴C- or ³H labeled compounds.This revised version was published online in November 2005 with corrections to the Cover Date.