Syntheses and structures of Mg(C5H5BMe)2, Mg(3,5-Me2C5H3BNMe2)2, the 2,2'-bipyridine adduct Mg(C5H5BMe)2(bipy), and the N-bonded aminoboratabenzene species Mg(3,5-Me2C5H3BNMe2)2(THF)2

The donor-free magnesocene analogues bis(1-methylboratabenzene)magnesium (1) and bis[3,5-dimethyl-1- (dimethylamino)boratabenzene]magnesium (2) are synthesized in good yields by the reactions of dimethylmagnesium with (trimethylstannyl)dihydroborinine precursors 3 and 4. In the crystalline state, both 1 and 2 possess sandwich structures with eta 6-coordinated boratabenzene ligands and display crystallographic centrosymmetry. Compound 1 reacts with the nitrogen donor 2,2'-bipyridine to give the Lewis base adduct (1)(bipy) (identical to 5). In the crystal structure of 5, one boratabenzene ligand is eta 6-bonded to the central metal while the other ligand adopts an eta 1-bonding mode. Crystallization of compound 2 from THF produces the solvate (2)(THF)2 (identical to 6), which exhibits a distorted tetrahedral N2O2 coordination environment around the magnesium atom. The average Mg-N bond distance is 2.141(3) A, and the N-Mg-N angle is 148.0(1) degrees. The observation of an aminoboratabenzene that is solely sigma-bonded to a metal is without precedent.     

Theoretical studies of d(A:T)-based parallel-stranded DNA duplexes.

Poly d(A:T) parallel-stranded DNA duplexes based on the Hoogsteen and reverse Watson-Crick hydrogen bond pairing are studied by means of extensive molecular dynamics (MD) simulations and molecular mechanics coupled to Poisson-Boltzmann (MM-PB/SA) calculations. The structural, flexibility, and reactivity characteristics of Hoogsteen and reverse Watson-Crick parallel duplexes are described from the analysis of the trajectories. Theoretical calculations show that the two parallel duplexes are less stable than the antiparallel Watson-Crick duplex. The difference in stability between antiparallel and parallel duplexes increases steadily as the length of the duplex increases. The reverse Watson-Crick arrangement is slightly more stable than the Hoogsteen duplex, the difference being also increased linearly with the length of the duplex. A subtle balance of intramolecular and solvation terms is responsible for the preference of a given helical structure.     

Quantum-chemical calculations of the relative stability of the keto-enol tautomers of 5-chlorouracyl

Relative energies (by MP4(SQTQ)/def2-TZVPP) for 13 tautomeric conformers of 5-chlorouracyl in the gas phase and in solution with consideration of nonspecific solvation in water are calculated. The geometrical parameters of the calculated conformers are analyzed. A stability series of tautomers with respect to the diketo form is obtained. It is shown that nonspecific solvation leads to changes in the stability series.     

Mode of interaction of two fluorinated-hydrogenated hybrid amphiphiles with dipalmitoylphosphatidylcholine (DPPC) at the air-water interface

Two-component Langmuir monolayers formed on 0.02M Tris buffer solution (pH 7.4) with 0.13M NaCl at 298.2K were investigated for two different fluorinated-hydrogenated hybrid amphiphiles (F6PH5PPhNa and F8PH5PPhNa or F6 and F8, respectively) with DPPC. Surface pressure (pi), surface potential (DeltaV) and dipole moment (mu( perpendicular)) as a function of molecular surface area (A) were measured by employing the Whilhelmy method and an ionizing electrode method. From the A- and DeltaV-X(F6) (or X(F8)) curves, partial molecular surface area (PMA) and apparent partial molecular surface potential (APSP) were determined as a function of surface mole fraction (X(Fn)) at discrete surface pressures. Then, the behavior of occupied surface areas and surface potentials of the respective components could be made clearer. Compressibility (C(s)), elasticity (C(s)(-1)), and excess Gibbs energy (DeltaG((ex))) as a function of X(F6) (or X(F8)) were estimated at definite pressures. These physico-chemical parameters were found to reflect the mechanical strength of monolayer films formed. The regular solution theory being applied to DeltaG((ex)), the activity coefficients (f) as well as the interaction parameter (I(p)) between DPPC and two hybrid amphiphiles in the binary monolayers were evaluated. I(p) values thus obtained indicated that F8 molecules interact more strongly with DPPC molecules than F6. Moreover, in order to better understand the morphological monolayer state, Langmuir-Blodgett (LB) films made from DPPC and fluorinated-hydrogenated hybrid amphiphiles were examined by atomic force microscopy (AFM). The miscibility of the two components in the monolayer state is evidenced by these thermodynamic quantities and AFM observations. Furthermore, AFM images demonstrated that F8 could more effectively disperse the ordered domains of DPPC than F6.     

The stable diiron(2.5) complex ion [(NC)(5)Fe(mu-tz)Fe(CN)5](5-), tz = 1,2,4,5-tetrazine, and its neighboring oxidation states

The conceptually simple mixed-valent diiron compound (NEt(4))(5)[(NC)(5)Fe(mu-tz)Fe(CN)(5)] with the 1,2,4,5-tetrazine (tz) bridging ligand was obtained as a thermally and air-stable material that displays large and highly variable electrochemical comproportionation constants between about 10(8) (in water) and 10(19.0) (in acetonitrile). Strong metal-metal interaction is also evident from spectroscopic results obtained for the solid and for the dissolved species. The rather intense intervalence charge-transfer band occurs around 2400 nm; infrared and M?ssbauer spectra reveal the high spectroscopic symmetry of the system according to an (Fe(2.5))(2) formulation. DFT calculations on the [(NC)(5)Fe(mu-tz)Fe(CN)(5)](6-) ion confirm the presence of very low-lying pi(tz) and high-lying d(Fe) orbitals.     

Construction of basis sets of hybrid atomic orbitals for describing the nonequivalent bonds of an atom with four neighboring atoms (sp 3 hybridization)

Methods for constructing the basis sets of sp³ hybrid atomic orbitals for atoms surrounded with four neighboring atoms are discussed in detail. The results obtained are generalized as a theorem of sp³ hybridization. A general method is proposed for constructing basis sets of orthogonal sp³ hybrid atomic orbitals for atoms with distorted tetrahedral environments. V. I. Vernadskii Institute of Geochemistry and Analytical Chemistry, Russian Academy of Sciences. Translated fromZhurnal Strukturnoi Khimii, Vol. 36, No. 6, pp.969–975, November–December, 1995. Translated by I. Izvekova     

Spectroscopic study of the interaction of poly(ε-N-methacryloyl-L-lysine) with copper(II)

The complexes formed between copper(II) and a polymeric ligand derived from L -lysine, poly(ε-N-methacryloyl-L -lysine) have been investigated by electronic absorption, circular dichroïsm, and EPR spectroscopy. The model molecule, ε-N-isobutyroyl-L -lysine was also studied with the purpose to distinguish between the effects due to the polymeric nature of the ligand and its intrinsic complexing properties. All experiment results are consistent with the existence of two CuL and CuL₂ complexes for both model and polymer Cu systems with no deprotonation of the amide group. The two complexes involve only the carboxyl and amino groups. With the polymer, the CuL₂ complex is the main species, even at low pH and low [ligand]/[metal] ratio. This is attributed to the high local concentration of ligand in the vicinity of the polymer chain. With the model molecule, on the contrary, the distribution of the two complexes is strongly dependent on the pH and the [ligand]/[metal] ratio.     

Conformational and neighboring effects in graft polymerization of acrolein on 4(5)-vinylimidazole-acrylamide copolymer

The graft polymerization of acrolein (AL) on poly-4(5)-vinylimidazole or the copolymers of 4(5)-vinylimidazole(VIm) and acrylamide of varying composition were carried out kinetically in an ethanol–water mixture at 0°C. The graft polymerization rate R_p increased with an increasing concentration of water in the solvent. On the other hand, the R_p of the copolymer which incorporated 50 mol % VIm showed the highest value. These results were discussed by assuming interaction between amide and imidazole groups in copolymer.     

Effect of 5-Me substituent(s) on the catalytic activity of palladium(II) 2,2-bipyridine complexes in CO/4-tert-butylstyrene copolymerization

The coordination of two 5-substituted-2,2^′-bipyridines L (L¹=5-methyl-2,2^′-bipyridine, L²=5,5^′-dimethyl-2,2^′-bipyridine) to palladium was studied. The neutral complexes [Pd(L)Cl₂] and [Pd(L)(Me)Cl], and the cationic complexes obtained after chlorine abstraction [Pd(L)₂][BAr^′₄]₂ and [Pd(L)(Me)(NCMe)][BAr^′₄] (Ar^′=3,5-(CF₃)₂-C₆H₃), respectively, were isolated and characterized by NMR and FAB mass spectroscopy. The complex [Pd(L²)(L³)][BAr^′₄]₂ (L³=2,2^′-bipyridine) bearing different ligands, was prepared for comparison purposes. The activity of the monocationic and dicationic complexes as catalytic precursors in the CO/4-tert-butylstyrene copolymerization was compared with that of related well-known catalysts containing the unsubstituted 2,2^′-bipyridine as nitrogen ligand, to evaluate the influence of the substituents in 5- and 5,5^′-position. The presence of one or two substituents on the nitrogen ligand has a positive effect on productivity using both types of precursors. No influence was observed on the polymer properties in terms of molecular weight and tacticity. Analysis of the reactivity of the methyl-palladium complexes towards carbon monoxide shows further differences depending on the nitrogen ligand.     

The C(8)-(2'-deoxy-beta-D-ribofuranoside) of 7-deazaguanine: synthesis and base pairing of oligonucleotides with unusually linked nucleobases

The 7-deazaguanine (2-aminopyrrolo[2,3-d]pyrimidin-4-one) C(8)-(2'-deoxy-beta-D-ribofuranoside) (6b), which possesses an unusual glycosylation site, was synthesized and incorporated in oligonucleotides. The oligonucleotides were prepared by solid-phase synthesis using phosphoramidite chemistry and were hybridized to form duplex DNA. Compound 6b is able to form base pairs with 2'-deoxy-5-methylisocytidine (m(5)isoC(d)) in oligonucleotide duplexes with antiparallel chain orientation and with dC in parallel duplex DNA. Thus, the C(8)-nucleoside 6b shows a similar base recognition as 2'-deoxyisoguanosine but not as 2'-deoxyguanosine. This indicates that the nucleic acid recognition not only depends on the donor-acceptor pattern of the nucleobase but is influenced by the glycosylation site. Base pairs of compound 6b formed with canonical and modified nucleosides are proposed.     

The interaction of silver ions with the isothiocyanatopenta-amminechromium(III) cation

The reaction of the isothiocyanatochromium(III) ion with silver ions produces adducts of the type [Cr(NH₃)₅NCSAg_n]X_n+2. For X = ClO₄, n = 1 and for NO₃, n = 2.     

Thermal stability of hybrid materials based on epoxy functional (poly)siloxanes

Epoxy functional (poly)siloxanes are one of the most important classes of modified silicones. Due to high reactivity of epoxy group and specific features of siloxane chain, they can make an excellent raw material for synthesis of hybrid materials. Results obtained in this study have shown that both the modification of epoxy resins with epoxy functional disiloxanes as well as the application of polysiloxanes with long polysiloxane chains and a specified content of epoxy groups makes it possible to produce hybrid materials of very good thermal stability. Crosslinking reactions were carried out with use of four diamines of which the best one appeared to be 4,4??-diaminodiphenylmethane. The highest thermal stability was found in the case of hybrid materials obtained from epoxy functional polysiloxanes.     

The interaction of poly(methacrylate) radicals with diphenyldiacetylenes

The free radical polymerization of methyl methacrylate (MMA) in the presence of p,p′- disubstituted diphenylbutadiynes was studied. Both the rate and degree of polymerization are somewhat lowered by the presence of the diynes, but the propagating radicals were stabilized giving clear ESR signals of the interacted polyMMA radicals at the polymerization temperature of 70°C. The magnitude of the interaction depended on the electron density of the diynes; in the cases of diphenylbutadiyne and dimethoxycarbonyldiphenylbutadiyne, the intoraction was more enhanced showing ESR signals with smaller spectra widths and increasing the number of radicals with the polymerization time, while in the cases of electron donor-substituted diynes the interaction was weaker and the radical concentration remained constant during the polymerization. These systems are considered to be examples of the stabilization of transient radicals by the direct interaction of radicals with additives without formation or breaking of chemical bonds. No diacetylenic group was found in the polyMMA obtained. © 1994 John Wiley & Sons, Inc.     

The interaction of nickelocene with bis(triphenylgermyl)cadmium

The reaction of bis(triphenylgermyl)cadmium with nickelocene proceeds through the displacement of a cyclopentadienyl ring and the formation of an organopolymetallic compound containing nine metal atoms:

This is a new type of organometallic compound, containing NiCd bonds.     

Thermal stability of styrene butadiene rubber (SBR) composites filled with kaolinite/silica hybrid filler

Styrene butadiene rubber (SBR) composites filled with fillers, such as modified kaolinite (MK), precipitated silica (PS), and the hybrid fillers containing MK and PS, were prepared by melt blending. The kaolinite sheets were finely dispersed in the SBR matrix around 20–80 nm in thickness and reached the nano-scale. The SBR composites with fillers exhibited excellent thermal stability compared to the pure SBR. The thermal stability of SBR composites was improved with the increasing of MK mass fraction. When MK hybridized with PS, kaolinite sheets were covered by the fine silica particles and the interface between filler particles and rubber matrix became more indistinct. SBR composite filled by hybrid fillers containing 40 phr MK and 10 phr PS became more difficult in decomposition and was better than that of 50 phr PS/SBR and 50 phr MK/SBR in thermal stability. Therefore, the hybridization of the fine silica particles with the kaolinite particles can effectively improve the thermal stability of SBR composites.     

Relative reactivity enhancement of (Me5Cp)2ZrCl2 in mixture with (1,2,4-Me3Cp)2ZrCl2 during ethene/1-hexene copolymerization

Dual-site ethene/1-hexene copolymerizations with MAO-activated (1,2,4-Me₃Cp)₂ZrCl₂ and (Me₅Cp)₂ZrCl₂ catalysts were performed. Copolymers with narrow molecular weight distributions and bimodal short chain branching distributions could be produced. The combined catalyst system demonstrates a number of discrepancies from an expected average behavior of the individual sites. Dual-site (1,2,4-Me₃Cp)₂ZrCl₂/(Me₅Cp)₂ZrCl₂ systems produce copolymers with lower incorporation than expected. Clear evidences for relative activity enhancement of the (Me₅Cp)₂ZrCl₂ catalyst in the mixture were observed in melting endotherms and Crystaf profiles. Molecular weights obtained by the mixture were higher than for any of the individual catalysts. A similar effect is observed for a dual-site system of the (1,2,4-Me₃Cp)₂ZrCl₂ catalyst together with the Me₄Si₂(Me₄Cp)₂ZrCl₂ catalyst as an alternative to (Me₅Cp)₂ZrCl₂.