Coulometric Titration of Thiocyanate,Mercaptoacetic Acid,and β-Mercaptopropionic Acid with Electrogenerated Hypobromite

Abstract

Several sulfur containing ligands have been determined by coulometric titration using biamperometric end point detection. Satisfactory results were obtained for the direct determination of thiocyanate, mercaptoacetic acid and β-mercaptopropionic acid. Silver has been determined by an indirect method involving the determination of excess precipitant.     

Quantitative Estimation of Dehydroascorbic Acid and Ascorbic Acid by High-Performance Liquid Chromatography—Application to Human Milk,Plasma, and Leukocytes

Abstract

A ‘high-performance’ liquid chromatographic (HPLC) method for quantitation of dehydroascorbic acid and ascorbic acid and its application to protein-free human milk, blood plasma and leukocytes (buffy layer) is described. In the method, DL-homocysteine was used to convert dehydroascorbic acid quantitatively to ascorbic acid that was measured by reversed phase liquid chromatography. Fresh human milk was found to contain ascorbic acid 54.3±6.5 mg/1 (mean±SEM; n=4) and dehydroascorbic acid 21. 0±9.1 mg/1 (mean±SEM, n=4) when stored at +4°C. The concentration of both forms of ascorbic acid was found to detoriate in similar ratios during storage at +4°C, and pasteurization considerably increased the loss of vitamin C. After pasteurization the milk contained ascorbic acid 8.6±3.4 mg/1 (mean±SEM, n=4) and dehydroascorbic acid 6.6±2.4 mg/1 (mean±SEM, n=4). In plasma the dehydroascorbic acid content (0.16±0.03 mg/1, mean±SEM, n=23) was lower than that of ascorbic acid (9.96±0.75 mg/1, mean±SEM, n=23).

The ascorbic acid concentration in the leukocyte mixtures was 0.21±0.04 mg/10⁹ cells (mean±SEM, n=10) and dehydroascorbic acid concentration 0.09±0.03 mg/10⁹ cells (mean±SEM, n=8). A statistically significant (r=0.599, p<0.05) correlation was established between the concentrations of ascorbic acid in plasma and leukocytes.     

Synthesis,Characterizations, and Crystal Structures of α-Hydroxyphosphonic Acid Esters

This article describes the synthesis of α-hydroxyphosphonic acid esters using the Pudovik reaction. IR, ¹H NMR, ¹³C NMR, ³¹P NMR, MS, and elemental analysis were employed to confirm their structures. X-ray structure analysis is reported for six compounds. The antibacterial activities of these compounds are also reported.

Supplemental materials are available for this article. Go to the publisher's online edition of Phosphorus, Sulfur, and Silicon and the Related Elements to view the free supplemental file.     

Photoionization,Structures, and Energetics of Na-Doped Formic Acid–Water Clusters

The influence of formic acid on water cluster aggregation has been investigated experimentally by mass spectrometry and tunable UV laser ionization applied to Na-doped clusters formed in the supersonic expansion of water vapors seeded with formic acid (FA) as well as theoretically using high level quantum chemistry methods. The mass spectra of Na−FA(H₂O)_n clusters show an enlarging of mass distribution toward heavier clusters with respect to the Na−(H₂O)_n clusters, suggesting similar mass distribution in neutral clusters and an influence of formic acid in water aggregation. Density functional theory and coupled-cluster type (DLPNO-CCSD(T)) calculations have been used to calculate structures and energetics of neutral and ionized Na−FA(H₂O)_n as well as neutral FA(H₂O)_n. Na-doped clusters are characterized by very stable geometries. The theoretical adiabatic ionization potential values match pretty well the measured appearance energies and the calculated first six electronic excited states show Rydberg-type characters, indicating possible autoionization contributions in the mass spectra. Finally, theoretical calculations on neutral FA(H₂O)_n clusters show the possibility of similarly stable structures in small clusters containing up to n=4–5 water molecules, where FA interacts significantly with waters. This suggests that FA can compete with water molecules in the starting stage of the aggregation process, by forming stable nucleation seed.     

Improved One-pot Synthesis of 4,6-Dihydroxyisophthalic Acid and 2,3-Dihydroxyterephthalic Acid

An improved method for the large-scale preparation of 4,6-dihydroxyisophthalic acid and 2,3-dihydroxyterephthalic acid has been developed.Compared to the previous procedures,this new process-requires much lower CO2 pressure of 0.3 Mpa and shorter reaction time.thus providing a convenient access for large-scale synthesis.The yield is high （93% and 65%,respectively）, and the oxidation of phenol is nearly inhibited,neither decolorization nor further chromatographic purification is required.     

Preparation and Characterization of Molybdotungstoniobogermanic Acid

Recently,thepreparationandpropertiesofheteropolycomplexeshaveincreasinglyattractedattentioninvariousfieldsofchendstIy,especiallyincatalysicapplicationsfortheiruniqueproperties'.Sincel988,thestudiesoffour-baseheteropolycomplexeswiththeKegginstructurehavebeenreported.Asthespecialbifunctionalcatalyticand.-lantisepsispropertyoftheheteropolycomplexescontainingniobium',andsofarthemolybdotungstoniobogermanicheteropolycomplexesinwhichthecentralatomisgermanium,havenotbeenreportedyet,ennea-tungsto-bi-mo…     

An Efficient Procedure for Esterification of Aryloxyacetic Acid and Arylthioacetic Acid Catalyzed by Silica Sulfuric Acid

Aryloxyacetate and arylthioacetate are wildly used in herbicides, plant regulator and insecticides. Recently, Wille et al. have reported that methyl aryloxyacetate is an efficient agent to prevent and treat allergic contact dermatitis.[1] The most popular synthesis is by heating sodium phenoxide (mercaptide) with ethyl chloroacetate in DMF,[2] or by the esterification of acid with alcohol using concentrated H2SO4 as catalyst.[3] In this paper, synthesis of aryloxyacetate and aryl thioacetate from aryloxyacetic acid and arylthioacetic acid respectively in ether catalyzed by silica sulfuric acid in 83%～94% yields is described. The catalyst is reused for 3 times without significant loss of activity (Entry 4). Compared with common procedures, the present procedure possesses the advantages of the operational simplicity, short reaction time,less-corrosion, high yield and reusable catalyst.     

Esterification of Glycerol by Oleic Acid and Selective Hydrogenation of Oleic Acid Methylester Over Acid and Ru-Sn-B Supported Mesoporous AlMCM-41

Demand for large pore size molecular sieves has given rise to great interests in a new family of silica-based mesoporous materials designated as M41s, which expand typical molecular sieves into an extra-large pore range and generate the potential for the applications of these materials in catalysis and sorption for very bulky molecules1-6. MCM-41 possesses a hexagonal arrangement of uniform mesopore ranging from 15 to 100 ? and can be prepared with varied Si/Al ratios. The investigations of …     

Crystal Structures of β-Cyclodextrin Complexes with Formic Acid and Acetic Acid

β-Cyclodextrin (β–CD)-formic acid (1) andβ-CD–acetic acid (2) inclusion complexes crystallizeas β-CD...0.3HCOOH...7.7H₂O andβ-CD...0.4CH₃COOH...7.7H₂O in themonoclinic space group P2₁ with comparable unit cell constants.Anisotropic refinement of atomic parameters against X-ray diffractiondata with F_o ² > 2σ (F_o ²) (986/8563 and 991/8358)converged at R-factors of 0.051 and 0.054 for 1 and 2,respectively. In both complexes, the β-CD molecularconformation, hydration pattern and crystal packing are similar,but the inclusion geometries of the guest molecules are different.The β-CD macrocycles adopt a ``round'' conformationstabilized by intramolecular, interglucose O3(n)...O2(n + 1)hydrogen bonds and their O6–H groups are systematically hydratedby water molecules. In the asymmetric unit, each complex contains oneβ-CD, 0.3 formic acid (or 0.4 acetic acid), and 7.7 water moleculesthat are distributed over 9 positions. Water sites located in theβ-CD cavity hydrogen bond to the guest molecule. In thecrystal lattice, β-CD molecules are packed in a typical ``herringbone'' fashion. In 1, the formic acid (occupancy 0.3) is entirely included in the β-CD cavity such that its C atom is shifted from the O4-plane center to the β-CD O6-side by 2.90 Å and C=O, C–-O bonds point to this side. In 2, the acetic acid (occupancy 0.4) is completely embedded in the β-CD cavity, in which the carboxylic C atom is displaced from the O4-plane centerto the β-CD O6-side by 0.87 Å; the C=O bond directsto the β-CD O6-side and makes an angle of 15°to the β-CD molecular axis. Furthermore, bothdimethyl-β-CD-acetic acid and β-CD-acetic acidcomplexes form a cage structure, showing that the small guestsenclosed entirely in the cavity either in β-CD or indimethyl-β-CD do not affect the packing of the host macrocycles.     

Synthesis, Resolution, and Enantiomeric Purity Assay of 2-n-Butylbutanedioic Acid 4-t-Butyl Esters

Introduction2-Substituted enantiomerically pure succinic acidderivatives have attracted a considerable interest in re-cent years,mainly because of their importance as chiralbuilding blocks and peptidomimetics in the field ofpharmaceutical design[1—3].Mos…     

Syntheses and Anti-lung Cancer Effects of Two Novel Dy(Ⅲ) Complexes Based on 1,3,5-Benzenetricarbocylic Acid and 1,3,5-Benzenetrisbenzoic Acid,respectively

The reactions of 1,3,5-benzenetricarbocylic acid(H3BTC) and 1,3,5-benzenetrisbenzoic acid(H3BTB) with Dy(NO3)3·6H2O afford two novel Dy(III) coordination polymers respectively, Dy(BTC)(H_2O)DMF(1) and [Dy(BTB)(Et OH)](DMF)(2)(DMF = N,N-dimethylformamide). 1 shows a 3D framework composed of available Lewis-acid metal sites which are occupied by the coordinated water molecules, and 2 features a noninterpenetrated open 3D framework with a 5-connected bnn hexagonal topology possessing the point symbol(46.64). In addition, in vitro antitumor activities of compounds 1 and 2 on three human lung cancer cells(H1975, HCC827 and A549) were further determined.     

Purification and Structure Identification of Hyaluronic Acid

Polysaccharide produced by mutated strain of Streptococcus zooepidemicus was purified by the procedures including Savage method, quaternary ammonium compound precipitation, DEAE-cellulose(DE52) chromatography and Sephadex G-75 gel filtration. The structure of the purified polysaccharide has been characterized by means of chemical composition analysis,13C NMR spectrum, infrared spectrum and circular dichroism (CD). All the results showed that the purified polysaccharide was hyaluronic acid (HA). The single helix conformation of the purified HA was determined by Congo red experiment. The molecular weight of the HA was about 1.16×106D, which was measured by viscosity method.     

Synthesis of L-Aspartic Acid and Lactone Copolymers

Recently,thesynthesisandapplications0fbiodegradablepolydepsipeptides,alternatingcopolymersofa-aminoacidanda-hydroxyacidwithfunctionalside-chaingroupshavedrawnmoreandmoreattentionl'2.Thisisbecausethefunctionalizedpendantgroups0fthep0lydepsipeptidesmakethemusefulf0rthepreparationofavarietyofpolymer-drugconjugates.However,thepolymerizati0nofdepsipeptideswithfuncti0nalgr0upsisratherdifficultduetotheirbigstructuresandsterichindrance.Furthermore,high-molecular-weightpr0ductsofsuitablephysicalpropert…     

Synthesis and Characterization of the Terpolymer of Itaconic Acid with Acrylamide and 2-Acrylamido-2-methylpropanesulfonic Acid

The thermal stability of the polymer is of great significance in paper, ceramics and oil industry1. Conventional polymers such as polyanionic cellulose can not meet high temperature limitations2-4. Aggour5-6 and Collette7 etc. have conducted extensive research on synthesis and characterizations of the copolymer or terpolymer containing 2-acrylamido-2-methyl-1-propane sulfonic acid (AMPS). Till now, very few research works have been reported on the terpolymer of itaconic acid (IA), acrylamid…     

Crystal and Molecular Structure of Cyanuric Acid

ＣｒｙｓｔａｌａｎｄＭｏｌｅｃｕｌａｒＳｔｒｕｃｔｕｒｅｏｆＣｙａｎｕｒｉｃＡｃｉｄＣｈｅｎＣｈａｎｇ－Ｚｈａｎｇ；ＳｈｉＪｉａｎ－ＱｉｕＬｉｎＺｈｏｕ－Ｂｉｎ；ＧａｏＤｏｎｇ－Ｓｈｏｕ；ＨｕａｎｇＸｉａｏ－Ｙｉｎｇ；ＬｉＤｉｎｇ（ＦｕｊｉａｎＩｎｓ...     

Isolation and Crystal Structure of 1',4'-Trans-diol of Abscisic Acid

1 INTRODUCTION It has been reported that botrytis cinerea, a plant pathogenic fungus, can produce abscisic acid ((2- cis,4-trans)-5-(1-hydroxy-2,6,6-trimethyl-4-oxo-2- cyclohexen-1-yl)-3-methyl-2,4-pentadienoic acid 1)[1] and 1?,4?-trans-diol of abscisic acid 2 that is a pre- cursor of 1[2]. Abscisic acid is an important plant hormone that can inhibit the germination of seeds[3]. Meanwhile, the derivatives of 2, 1?,4?-trans-diol of abscisic acid ester 3 and 4?-methoxy derivative 4, are oil…     

Self-assembled Monolayers of n-Hexadecanoic Acid and α-Hydroxyl n-Hexadecanoic Acid on Titanium Surfaces

Ｄｕｒｉｎｇｔｈｅｌａｓｔｔｗｏｄｅｃａｄｅｓ ,ｐｅｏｐｌｅｈａｖｅｐａｉｄｍｕｃｈｉｎｔｅｒｅｓｔｉｎｔｈｅｃｈｅｍｉｓｔｒｙｏｆｓｅｌｆ ａｓｓｅｍｂｌｅｄｍｏｎｏｌａｙｅｒｓ(ＳＡＭｓ) ,ｗｈｉｃｈｓｈｏｗｓｐｏｗｅｒｆｕｌａｐｐｌｉｃａｔｉｏｎｓｉｎｔｈｅｆｉｅｌｄｓｏｆｂｉｏｓｅｎｓｏｒｓａｎｄｔａｉｌｏｒｅｄｓｕｒｆａｃｅｓ .Ｐａｒｔｉｃｕｌａｒｌｙ ,ｔｗｏｔｙｐｅｓｏｆＳＡＭｓ ,ｉ.ｅ .,ｔｈｉｏｌｓ/ｔｈｉｏｌａｔｅｓｏｎｇｏｌｄａｎｄｓｉｌａｎｅｓｏｎｓｉｌｉｃｅｏｕｓｓｕｒｆａｃｅ…     

Synthesis, Structure and Characterization of Manganese（ Ⅱ ） Coordination Polymer with Camphoric Acid and 1, 10-Phenanthroline

IntroductionThe syntheses of metal-organic coordination poly-mers have been attracting increasing attention owing tothe potential applications of their functional materials incatalysis,non-linear optics,magnetism sensors andmolecular recognition[1—7].Coordination polymers crys-tallized from polyaromatic acids and metal-ions are ofgreat interest for their polymeric structures and porousproperties[8—12].Their network topologies based on mo-lecular building blocks are usually controlled and mod…     

Synthesis, Crystal Structure and Properties of a Europium Complex with 3-Iodobenzoic Acid and 2,2'-Bipyridine

The complex [Eu(3-IBA)3·2,2'-bipy]2 was synthesized from 3-iodobenzoic acid (3-HIBA), 2,2'-bipyridine (2,2'-bipy) and EuCl3·6H2O by hydrothermal synthesis, and its crystal structure was determined by X-ray single-crystal diffraction. It is of triclinic, space group P1, with a = 10.958(2), b = 12.311(3), c = 12.556(3) A, α = 81.549(3), β = 82.404(4), γ = 78.348(3)°, Mr = 1049.15, V = 1631.7(6) 3, Z = 1, Dc = 2.135 g/cm3, F(000) = 980, λ(MoKα) = 0.71073 , μ(MoKα) = 4.804 mm-1, the final R = 0.0329 and wR = 0.0723 for 4640 observed reflections with I > 2σ(I). The Eu(Ⅲ) ion is eight-coordinated and two Eu(Ⅲ) ions are held together by four 3-iodobenzoate groups in the bidentate bridging mode. The complex was characterized by DTA-TG, IR, UV and fluorescence spectra.     

γ-Hydroxyacetylenic Acid Derivatives: Generation from Propiolic Acid and Ester Anions and Their Use in Butenolide Synthesis

γ-Hydroxyacetylenic acids and esters have been found to be conveniently prepared in our laboratory by the addition of the propiolic acid dianion¹ or the acetylide of methylpropiolate² to an aldehyde or to a ketone (Scheme I, Table I). These polyfunctional compounds have been shown previously to be useful synthetic intermediates in route to such compounds as 1,3-dienes,² carbohydrates³ and butenolides.^4–7