Thermal behaviour and S-O bonding state of alkaline-earth metal sulfites

The thermal behaviours of magnesium sulfite, strontium sulfite and barium sulfite were investigated in the atmospheres of argon and air. the thermal behaviours of magnesium sulfite were different from those of the other two sulfites. The oxidation of magnesium sulfite in air does not occur.The bonding state of the SO ₃ ^2– in each sulfite was compared. The SO ₃ ^2– in magnesium sulfite was coordinated through the sulfur, while those in the other sulfites were coordinated through the oxygen.It appears that the difference in thermal behaviour between magnesium sulfite and the other sulfites depend upon the difference in bonding state of the SO ₃ ^2– We wish to thank Mr. K. Takahashi of MAC Science Inc. for TG and DTA measurements, mass spectra in Ar and his valuable discussions.     

In situ S K-edge X-ray absorption spectroscopy for understanding and developing SOx storage catalysts

In situ S K-edge XANES experiments were carried out on second-generation SO(x)() trapping materials under oxidizing and reducing conditions. The experiments clearly show that the strong release of SO(2) under rich conditions at plug flow conditions is caused by the facilitated reduction of sulfite species on Pt. In the absence of Pt the sulfite species were stable under reducing conditions, while maintaining a similar total SO(2) uptake capacity. Thus, SO(x)() trapping materials without a noble metal are a clearly better option. The enhancing effect on the SO(x)() storage process of water present in the gas mixture is attributed to the formation of a higher sulfate fraction in the samples. The application of the in situ S K-edge XANES technique clearly reveals new information and insights on the behavior of the sulfur in the trapping process compared to that from the ex situ measurements and is therefore essential for designing new SO(x)() trapping materials.     

Picomolar quantitation of free sulfite in foods by means of [57Co]hydroxocobalamin and radiometric chromatography of [57Co]sulfitocobalamin. Method, applications and significance of coexisting sulfides

The concentration dependent reaction of sulfite with 57Co-labeled hydroxocobalamin (OH57CoCbl) to produce a sulfitocobalamin (SO(3)57CoCbl) adduct served as a quantification strategy for foodborne sulfite residues freely extracted into pH 5.2, 0.05 M acetate buffer. SO(3)57CoCbl was then resolved using SP-Sephadex C-25 gel chromatography and its radiometric detection allowed calculation of a standard logit plot from which unknown sulfite concentrations could be determined. The sulfite detection range was 6.0 nM-0.3 pM with respective relative standard deviations of 4.4-29.4% for 50-microl samples. Individual incidences of foodborne sulfite intolerances provoked by L-cysteine or sulfite additive use in bakery products, which remained undetected using conventional sulfite analytical methods, underscored the quantitative value of the method. The analytical significance and occurrences of detectable sulfides coexisting with foodborne sulfite residues was also addressed.     

Interaction of Al2O3 and CeO2 surfaces with SO2 and SO2 + O2 studied by X-ray photoelectron spectroscopy

The interaction of Al2O3 and CeO2 thin films with sulfur dioxide (2.5 mbar) or with mixtures of SO2 with O2 (5 mbar) at various temperatures (30-400 degrees C) was studied by X-ray photoelectron spectroscopy (XPS). The analysis of temperature-induced transformations of S2p spectra allowed us to identify sulfite and sulfate species and determine the conditions of their formation on the oxide surfaces. Sulfite ions, SO3(2-), which are characterized by the S2p(3/2) binding energy (BE) of approximately 167.5 eV, were shown to be formed during the interaction of the oxide films with pure SO2 at temperatures < or =200 degrees C, whereas sulfate ions, SO4(2-), with BE (S2p(3/2)) approximately 169 eV were produced at temperatures > or =300 degrees C. The formation of both the sulfite and sulfate species proceeds more efficiently in the case of CeO2. The addition of oxygen to SO2 suppresses the formation of the sulfite species on both oxides and facilitates the formation of the sulfate species. Again, this enhancement is more significant for the CeO2 film than for the Al2O3 one. The sulfation of the CeO2 film is accompanied by a reduction of Ce(IV) ions to Ce(III) ones, both in the absence and in the presence of oxygen. It has been concluded that the amount of the sulfates on the CeO2 surface treated with the SO2 + O2 mixture at > or =300 degrees C corresponds to the formation of a 3D phase of the Ce(III) sulfate. The sulfation of Al2O3 is limited by the surface of the oxide film.     

New organically templated copper(I) sulfites: the role of sulfite anion as both soft and hard ligand

Two new organically templated layered copper(I) sulfites, namely, {H2pip}{Cu3(CN)3(SO3)} (1) and {H2pip}{NaCu2(SO3)2Br(H2O)}.2H2O (2) (pip = piperazine), have been synthesized by hydrothermal reactions of copper(I) cyanide or copper(I) bromide with NaHSO3 and piperazine. Both compounds exhibit a layered structure. The 2D layer of {Cu3(CN)3(SO3)}2- in 1 is composed of 1D chains of copper(I) cyanide interconnected by sulfite anions via both Cu-S and Cu-O bonds, whereas the 2D layer of {NaCu2(SO3)2Br}2- in 2 is formed by 1D chains of copper(I) bromide and 1D sodium(I) aqua chains that are interconnected by sulfite anions via Na-O, Cu-S, and Cu-O bonds. Chemical bonding in 1 and 2 has been also investigated by theoretical calculations based on DFT methods.     

Electronic and photophysical properties of adducts of [Ru(bpy)3]2+ and Dawson-type sulfite polyoxomolybdates α/β-[Mo18O54(SO3)2]4-

The spectroscopic and photophysical properties of [Ru(bpy)(3)](2)[[Mo(18)O(54)(SO(3))(2)], where bpy is 2,2'-bipyridyl and [Mo(18)O(54)(SO(3))(2)](4-) is either the α or β-sulfite containing polyoxomolybdate isomer, have been measured and compared with those for the well known but structurally distinct sulfate analogue, α-[Mo(18)O(54)(SO(4))(2)](4-). Electronic difference spectroscopy revealed the presence of new spectral features around 480 nm, although they are weak in comparison with the [Ru(bpy)(3)](2)[Mo(18)O(54)(SO(4))(2)] analogue. Surprisingly, Stern-Volmer plots of [Ru(bpy)(3)](2+) luminescence quenching by the polyoxometallate revealed the presence of both static and dynamic quenching for both α and β-[Mo(18)O(54)(SO(3))(2)](4-). The association constant inferred for the ion cluster [Ru(bpy)(3)](2)α-[Mo(18)O(54)(SO(4))(2)] is K = 5.9 ± 0.56 × 10(6) and that for [Ru(bpy)(3)](2)β-[Mo(18)O(54)(SO(4))(2)] is K = 1.0 ± 0.09 × 10(7). Unlike the sulfate polyoxometalates, both sulfite polyoxometalate-ruthenium adducts are non-luminescent. Despite the strong electrostatic association in the adducts resonance Raman and photoelectrochemical studies suggests that unlike the sulfato polyoxometalate analogue there is no sensitization of the polyoxometalate photochemistry by the ruthenium centre for the sulfite anions. In addition, the adducts exhibit photochemical lability in acetonitrile, attributable to decomposition of the ruthenium complex, which has not been observed for other [Ru(bpy)(3)](2+) -polyoxometalate adducts. These observations suggest that less electronic communication exists between the [Ru(bpy)(3)](2+) and the sulfite polyoxoanions relative to their sulfate polyoxoanion counterparts, despite their structural and electronic analogy. The main distinction between sulfate and sulfite polyoxometalates lies in their reversible reduction potentials, which are more positive by approximately 100 mV for the sulfite anions. This suggests that the capacity for [Ru(bpy)(3)](2+) or analogues to sensitize photoreduction in the adducts of polyoxometalates requires very sensitive redox tuning.     

Sulfur speciation by capillary zone electrophoresis: conditions for sulfite stabilization and determination in the presence of sulfate, thiosulfate and peroxodisulfate

Capillary zone electrophoresis (CZE) was used for the separation of the sulfur species SO3(2-), SO4(2-), S2O(3-) and S2O8(2-). Using an electrolyte system with 9.5 mmol L(-1) potassium chromate as UV-absorbing probe and 1 mmol L(-1) diethylenetriamine (DETA) as electroosmotic flow modifier, various possibilities for the stabilization of sulfite and electrophoretic separation of the sulfur anions were investigated. By adding 5% propanol as a stabilizer to both the working electrolyte and the sample solution, a good stabilization for sulfite and a separation of the sulfur anions in a short analysis time (4 min) was achieved. The advantages by using propanol instead of other stabilizers often used in analytical techniques are discussed. The electrophoretic separation of the sulfur anions was optimized with respect to the pH of the working electrolyte and concentration of the electroosmotic flow modifier (DETA). The detection limits achieved for SO3(2-), SO4(2-), S2O3(2-) and S2O8(2-) were 0.35, 0.25, 0.78 and 0.80 mg L(-1), respectively.     

Surface reorganization accompanying the formation of sulfite and sulfate by reaction of sulfur dioxide with oxygen on Ag111

On the Ag(111)-p(4x4)-O surface SO2(g) reacts with oxygen according to SO2(g)+O(a)-->SO3(a). Sulfite forms in a (2 radical3x2 radical3)R30 degrees structure. The restructuring of the surface atoms during sulfite formation is indicative of the deconstruction of the p(4x4)-O structure. Heating the sulfite-covered surface to 700 K affects the disproportionation of SO3 to SO4 in a (4 square root of 3 x square root of 3)R30 degrees structure accompanied by the desorption of SO2(g) and smoothing of the surface. Continued heating beyond 700 K affects the complete decomposition of sulfate to SO2(g) and O2(g).     

Cross-talk Between (Hydrogen)Sulfite and Metalloproteins: Impact on Human Health

Sulfite is a potent toxic substance causing harm to multi-organ in human. Despite toxicity, it is widely used as preservative, anti-browning and anti-oxidant in foods, beverages, and pharmaceuticals, which cause easy admission of sulfite in human. Sulfite is also produced endogenously during the catabolism of cysteine and methionine. In vivo, the serum sulfite level at physiological range is strictly maintained by a molybdenum dependent sulfite oxidase (SO), which catalyzes sulfite to sulfate oxidation via a two-electron oxidation pathway. The loss of SO activity causes high serum sulfite level that fosters several diseases, including asthma, neurological dysfunction, birth defects, and heart diseases. The cytotoxicity of (bi)sulfite is implicated as sulfite radicals, which are generated by mainly heme-peroxidases via a one-electron oxidation pathway. On the other hand, the toxic sulfite radicals are neutralized to sulfite by heme-globins. The enzymatic reduction of sulfite to sulfide is catalyzed by sulfite reductase, which contains an unusual metal cofactor, siroheme-[4Fe4S]-cluster. Overall, the interaction of sulfite with various metalloproteins in vivo is a close relation with human health. Therefore, this review describes the metabolic conversion of (bi)sulfite to sulfate, sulfite radical or sulfide via oxidation or reduction pathways by various metalloproteins (specially SOs, peroxidases, heme-globins, and sulfite reductases), and the potential applications of sulfite in biosensors/biofuel cells, anti-browning, and advance oxidation process.     

Mechanism of heterogeneous reaction of carbonyl sulfide on magnesium oxide

Heterogeneous reaction of carbonyl sulfide (OCS) on magnesium oxide (MgO) under ambient conditions was investigated by in situ diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS), quadrupole mass spectrometer (QMS), and density functional theory (DFT) calculations. It reveals that OCS can be catalytically hydrolyzed by surface hydroxyl on MgO to produce carbon dioxide (CO2) and hydrogen sulfide (H2S), and then H2S can be further catalytically oxidized by surface oxygen or gaseous oxygen on MgO to form sulfite (SO3(2-)) and sulfate (SO4(2-)). Hydrogen thiocarbonate (HSCO2-) was found to be the crucial intermediate. Surface hydrogen sulfide (HS), sulfur dioxide (SO2), and surface sulfite (SO3(2-)) were also found to be intermediates for the formation of sulfate. Furthermore, the surface hydroxyl contributes not only to the formation of HSCO2- but also to HSCO2- decomposition. On the basis of experimental results, the heterogeneous reaction mechanism of OCS on MgO was discussed.     

DITHIONITE TREATMENT OF FLAVINS: SPECTRAL EVIDENCE FOR COVALENT ADDUCT FORMATION and EFFECT ON in vitro BACTERIAL BIOLUMINESCENCE

Intrigued by the apparent requirement of dithionite for FMN reduction (as opposed to photoreduction or catalytic hydrogenation) in the H2O2-initiated bacterial bioluminescence reaction, we chose 5-ethyl-3-methyllumiflavinium cation I as a model to investigate possible flavin adduct formation by treatment with dithionite or (bi)sulfite. In the range of pH 5-8, the reaction of dithionite with 5-ethyl-3-methyllumiflavinium cation, which is in equilibrium with the 5-ethyl-4a-hydroxy-3-methyl-4a, 5-dihydrolumiflavin pseudobase II (X = OH), is not limited to the formation of flavosemiquinone and dihydroflavin following two one-electron steps. Several parallel and sequential reactions may take place involving the intermediacy of covalent flavin adducts. Addition of (bi)sulfite gave a 4a-sulfiteflavin adduct II (X = SO3-). Consistent with the S2O4(2-) in equilibrium with 2 SO2-. equilibrium, the reaction of dithionite and II (X = OH; SO3-) gave rise to two flavin adducts in competitive nucleophilic displacements: a 4a-sulfoxylate-flavin radical (II, X = SO2.) and a 4a-dithioniteflavin adduct (II, X = S2O4-), respectively. On increasing the (S2O4(2-), SO2.-)/flavin ratio under N2, the formation of the 4a-sulfoxylate-flavin radical became predominant. The II (X = SO2.) so formed was in equilibrium with the flavosemiquinone and bisulfate and can be trapped by reacting with hydroxylamine. In the initial presence of oxygen, II (X = SO2.) was highly reactive toward O2, giving a fast oxidation to II (X = SO3-) and effectively suppressing the formation of the flavosemiquinone.(ABSTRACT TRUNCATED AT 250 WORDS)     

SO_2在ZnO颗粒物表面的非均相反应

使用原位漫反射红外傅里叶变换光谱(DRIFTS)研究了SO2在ZnO颗粒物表面的非均相反应,考察了相对湿度(RH)及紫外光光照对反应的影响.结果表明:无紫外光光照条件下,SO2在ZnO颗粒物表面反应的主要产物为亚硫酸盐,RH与生成的亚硫酸盐量呈负相关关系;有紫外光光照条件下,SO2在ZnO颗粒物表面反应的主要产物为亚硫酸盐和硫酸盐,随着相对湿度和紫外光照强度的增加,亚硫酸盐向硫酸盐转化.光照和水汽对SO2在ZnO颗粒物上的氧化反应起到协同促进作用.以亚硫酸盐生成量计算,干态无光条件下反应对SO2的级数为1.6,接近二级反应;在RH为40%且紫外光光照条件下,反应对SO2的级数为0.91,接近一级反应;使用BET比表面积作为反应有效面积,反应初始摄取系数在干态无光照条件和RH=40%且紫外光照条件下分别为4.87×10-6和2.29×10-5.     

Sulfur X-ray absorption and vibrational spectroscopic study of sulfur dioxide, sulfite, and sulfonate solutions and of the substituted sulfonate ions X3CSO3- (X = H, Cl, F)

Sulfur K-edge X-ray absorption near-edge structure (XANES) spectra have been recorded and the S(1s) electron excitations evaluated by means of density functional theory-transition potential (DFT-TP) calculations to provide insight into the coordination, bonding, and electronic structure. The XANES spectra for the various species in sulfur dioxide and aqueous sodium sulfite solutions show considerable differences at different pH values in the environmentally important sulfite(IV) system. In strongly acidic (pH < approximately 1) aqueous sulfite solution the XANES spectra confirm that the hydrated sulfur dioxide molecule, SO2(aq), dominates. The theoretical spectra are consistent with an OSO angle of approximately 119 degrees in gas phase and acetonitrile solution, while in aqueous solution hydrogen bonding reduces the angle to approximately 116 degrees . The hydration affects the XANES spectra also for the sulfite ion, SO32-. At intermediate pH ( approximately 4) the two coordination isomers, the sulfonate (HSO3-) and hydrogen sulfite (SO3H-) ions with the hydrogen atom coordinated to sulfur and oxygen, respectively, could be distinguished with the ratio HSO3-:SO3H- about 0.28:0.72 at 298 K. The relative amount of HSO3- increased with increasing temperature in the investigated range from 275 to 343 K. XANES spectra of sulfonate, methanesulfonate, trichloromethanesulfonate, and trifluoromethanesulfonate compounds, all with closely similar S-O bond distances in tetrahedral configuration around the sulfur atom, were interpreted by DFT-TP computations. The energy of their main electronic transition from the sulfur K-shell is about 2478 eV. The additional absorption features are similar when a hydrogen atom or an electron-donating methyl group is bonded to the -SO3 group. Significant changes occur for the electronegative trichloromethyl (Cl3C-) and trifluoromethyl (F3C-) groups, which strongly affect the distribution especially of the pi electrons around the sulfur atom. The S-D bond distance 1.38(2) A was obtained for the deuterated sulfonate (DSO3-) ion by Rietveld analysis of neutron powder diffraction data of CsDSO3. Raman and infrared absorption spectra of the CsHSO3, CsDSO3, H3CSO3Na, and Cl3CSO3Na.H2O compounds and Raman spectra of the sulfite solutions have been interpreted by normal coordinate calculations. The C-S stretching force constant for the trichloromethanesulfonate ion obtains an anomalously low value due to steric repulsion between the Cl3C- and -SO3 groups. The S-O stretching force constants were correlated with corresponding S-O bond distances for several oxosulfur species.     

The activation of molecular oxygen by horseradish peroxidase with sodium sulfite

Horseradish peroxidase (HRP) utilizes molecular oxygen (O2) with sodium sulfite (Na2SO3) to oxidize thioanisole and styrene at the exterior of the heme pocket.     

Adsorption of sulfur dioxide on hematite and goethite particle surfaces

The adsorption of sulfur dioxide (SO(2)) on iron oxide particle surfaces at 296 K has been investigated using X-ray photoelectron spectroscopy (XPS). A custom-designed XPS ultra-high vacuum chamber was coupled to an environmental reaction chamber so that the effects of adsorbed water and molecular oxygen on the reaction of SO(2) with iron oxide surfaces could be followed at atmospherically relevant pressures. In the absence of H(2)O and O(2), exposure of hematite (alpha-Fe(2)O(3)) and goethite (alpha-FeOOH) to SO(2) resulted predominantly in the formation of adsorbed sulfite (SO(3)(2-)), although evidence for adsorbed sulfate (SO(4)(2-)) was also found. At saturation, the coverage of adsorbed sulfur species was the same on both alpha-Fe(2)O(3) and alpha-FeOOH as determined from the S2p : Fe2p ratio. Equivalent saturation coverages and product ratios of sulfite to sulfate were observed on these oxide surfaces in the presence of water vapor at pressures between 6 and 18 Torr, corresponding to 28 to 85% relative humidity (RH), suggesting that water had no effect on the adsorption of SO(2). In contrast, molecular oxygen substantially influenced the interactions of SO(2) with iron oxide surfaces, albeit to a much larger extent on alpha-Fe(2)O(3) relative to alpha-FeOOH. For alpha-Fe(2)O(3), adsorption of SO(2) in the presence of molecular oxygen resulted in the quantitative formation of SO(4)(2-) with no detectable SO(3)(2-). Furthermore, molecular oxygen significantly enhanced the extent of SO(2) uptake on alpha-Fe(2)O(3), as indicated by the greater than two-fold increase in the S2p : Fe2p ratio. Although SO(2) uptake is still enhanced on alpha-Fe(2)O(3) in the presence of molecular oxygen and water, the enhancement factor decreases with increasing RH. In the case of alpha-FeOOH, there is an increase in the amount of SO(4)(2-) in the presence of molecular oxygen, however, the predominant surface species remained SO(3)(2-) and there is no enhancement in SO(2) uptake as measured by the S2p : Fe2p ratio. A mechanism involving molecular oxygen activation on oxygen vacancy sites is proposed as a possible explanation for the non-photochemical oxidation of sulfur dioxide on iron oxide surfaces. The concentration of these sites depends on the exact environmental conditions of RH.     

SO3(2-)-based chemiluminescence in unbuffered solution with ClO2 as oxidant and its analytical application

In this paper, SO3(2-)-chemiluminescence (CL) system in unbuffered solution with ClO2 as oxidant is proposed. ClO2 could oxidize sulfite in unbuffered solution to produce CL emission, and riboflavin could sensitize the ClO2-SO3(2-)-based CL system. The ClO2-SO3(2-)-riboflavin CL reaction was chosen as a model system and explored the possibility of SO3(2-)-based CL system in unbuffered solution. Compared with the reported SO3(2-)-based CL system in strong acid media, the proposed CL system owns its advantages. Combined with flow-injection analysis, the proposed CL system was applied to measurement of riboflavin in pharmaceuticals.     

Influence of Cu(II) on the interaction between sulfite and horseradish peroxidase in vitro

This paper discussed the quantitative influence of Cu(II) on the interaction between horseradish peroxidase (HRP) and sulfite (SO3(2-)), which is a derivate of sulfite dioxide in human bodies, by using fluorescence spectrum and ultraviolet (UV) absorption spectrometry in vitro. The results show that under the conditions of physiological pH and room-temperature, Cu(II) can bind strongly with both the protein part and the ferroporphyrin part in HRP at a low concentration (10(-4) mol L(-1)), and the combination constants are 2.047 x 10(3) and 7.66 x 10(2) L mol(-1), respectively. Under the same conditions, SO3(2-) at low concentrations (<0.15 mol L(-1)) has little quenching for the fluorescence of HRP at 330 nm, and the combination constant is 0.108 L mol(-1). While the fluorescence intensity at 440 nm enhance gradually with the increased concentration of SO3(2-) (<0.1 mol L(-1)), and the combination constant is 8.219 L mol(-1). These indicate that SO3(2-) at low concentration has little reaction with the enzyme protein part in HRP but obvious reaction with the ferroporphyrin part in HRP. After SO3(2-) at low concentrations is added into the HRP-Cu(II) binary system, the reaction constants between SO3(2-) and the enzyme protein part in HRP increase rapidly. Compared with the absence of Cu(II), the combination constant of SO3(2-) with the enzyme protein part in HRP increases nearly 70 times with a certain Cu(II) concentration (5.0 x 10(-4) mol L(-1)) in the system. However, the presence of Cu(II) in the system has little effect on the reaction constants between SO3(2-) and the ferroporphyrin part in HRP.     

Kinetics and mechanism of the oxidation of sulfite by chlorine dioxide in a slightly acidic medium

The sulfite-chlorine dioxide reaction was studied by stopped-flow method at I = 0.5 M and at 25.0 +/- 0.1 degrees C in a slightly acidic medium. The stoichiometry was found to be 2 SO(3)(2-) + 2.ClO(2) + H(2)O --> 2SO(4)(2) (-) + Cl(-) + ClO(3)(-) + 2H(+) in *ClO(2) excess and 6SO(3)(2-) + 2*ClO(2) --> S(2)O(6)(2-) + 4SO(4)(2-) + 2Cl(-) in total sulfite excess ([S(IV)] = [H(2)SO(3)] + [HSO(3)(-)] + [SO(3)(2-)]). A nine-step model with four fitted kinetic parameters is suggested in which the proposed adduct *SO(3)ClO(2)(2-) plays a significant role. The pH-dependence of the kinetic traces indicates that SO(3)(2-) reacts much faster with *ClO(2) than HSO(3)(-) does.     

Sulfite induced autoxidation of NiII and CoII tetraglycine complexes. Spectrophotometric and rotating ring-disc voltammetric studies

The oxidation of Ni(II) and Co(II) tetraglycine complexes in borate buffer aqueous solution, by dissolved oxygen, is strongly accelerated by sulfite. The formation of Ni(III) and Co(III) complexes with maximum absorbances at 327 and 265 nm, respectively, was followed by spectrophotometric measurements. Ni(III) formation was also characterized by voltammetry at low temperatures, whose anodic and cathodic components were observed in the recorded voltammograms. Spectra and rotating ring-disc voltammograms, recorded at various rotation speed values, showed that the Ni(III) species decomposes. The electrochemical process related to the couple Co(II)/Co(III), in a medium containing tetraglycine, was not reversible. In both Ni(II) and Co(II) complexes the metal ion oxidation in the presence of oxygen and sulfite involves the reduction of some initial Ni(III) or Co(III) by sulfite to produce the SO(3).- radical, which rapidly reacts with dissolved oxygen to produce SO(5).-, which then oxidizes Ni(II) or Co(II).     

Determination of sulfite in dried garlic by reversed-phase ion-pairing liquid chromatography with post-column detection

A method is described for determining sulfite in dried garlic. Garlic is extracted with an HCl solution to inhibit the formation of allicin, which interferes with the determination of sulfite. After cleanup of the extract on a C18 solid-phase extraction column, sulfite is converted to hydroxymethylsulfonate (HMS) by adding formaldehyde and heating to 50 degrees C. HMS is determined by reversed-phase ion-pairing liquid chromatography with post-column detection. The post-column reaction system consists of the addition of KOH to convert HMS to sulfite ion, followed by the addition of 5,5'-dithiobis(2-nitrobenzoic acid) to produce 5-mercapto-2-nitrobenzoic acid which is detected spectrophotometrically at 450 nm. Background levels in unsulfited dried garlic equivalent to < 20 ppm SO2 were found. Recoveries of HMS from spiked garlic averaged 94.8% with a coefficient of variation of 3.8%. Sulfite was found in 13 of 21 samples of dried garlic produced in China, with sulfite ranging from 114 to 445 ppm. Sulfite was found in 60% of commercial dried garlic products purchased locally. The suitability of the Monier-Williams method for determining sulfite in garlic is discussed.