Ce 5d and Fe 3d magnetic profiles in CeH2/Fe multilayers probed by XRMS

The element and electronic shell specificities of X-ray resonant magnetic scattering have been used to investigate the magnetization of Ce 5d and Fe 3d states in [CeH₂(19.6 ?)/Fe(25.4 ?)]*38 a multilayer. We show that the measurement of the magnetic contribution to the intensities reflected at low angles at the Ce L₂ and Fe L_2,3 edges allows us to investigate the profile of the Ce 5d and Fe 3d magnetic polarization. The Fe 3d polarization is found to be uniform across the Fe layer and the Ce 5d polarization appears to be restricted close to the interface with Fe. Received: 22 May 2001 / Accepted: 4 July 2001 / Published online: 5 October 2001     

Magnetic interface polarization of the La-5d states in Fe/LaHx multilayers

For rare-earth (RE)-hydrides (REHx), a metal-to-insulator transition is observed if the hydrogen concentration is increased from the dihydride (x=2) towards the trihydride (x=3). This transition provides an object for studies of the magnetic interface polarization in layered ferromagnet/insulator structures. For different samples with a fixed Fe and varied LaH_x sublayer thickness t_LaHx ([15 ? Fe/t? LaH_x]xn), the H concentration x in the LaH_x sublayer is gradually increased in the experiment. Starting from the as prepared dihydride REH_2-δ, the modification of the magnetic polarization of the La-5d states at the Fe/La_x interface is studied across the transition by magnetic circular dichroism measurements at the La-L₂ and L₃ edges. The experiments reveal an induced magnetic polarization of the La-5d hole states on a length scale of 9 ? that is independent of the altered electronic structure of the La-5d states. Received: 23 May 2001 / Accepted: 4 July 2001 / Published online: 5 October 2001     

The coupling of Cr to Fe studied by circular magnetic X-ray dichroism

The coupling of Cr to Fe in stacked Cr/Fe/Cr trilayers is studied by circular magnetic X-ray dichroism using fluorescence yield to monitor the absorption. From the dichroic spectra, we determine the thickness dependent average magnetic coupling of Cr to Fe for Cr layer thicknesses of 1, 2 and 3 ML. We compare our results to new calculated spectra. Additionally, all Cr spectra show significant contributions due to photon scattering processes at theL _{2, 3} absorption edges depending on the degree of circular polarization.     

Structural and magnetic properties of La/Fe multilayers

The structural and magnetic properties of La/Fe multilayers were investigated by X-ray diffraction, RHEED, magnetometry and⁵⁷Fe Mössbauer spectroscopy. Comparison is made with previous results obtained for Ce/Fe multilayers. Remarkably sharp interfaces are found, with roughness between 2 and 2.5 Å. The magnetic interface in the Fe sublayers resulting from the distribution of magnetic hyperfine fields distinctly exceeds the extension of the structural interface and points to a magnetic proximity effect. This is discussed in relation to a strong 3d-5d hybridization recently found in measurements of magnetic circular X-ray dichroism. Both the structural and magnetic La/Fe interface is less extended than the interface in Ce/Fe multilayers. Below a thickness of about 25 Å, the individual Fe layers grow in an amorphous structure on the La layers. In this case, Curie temperatures are below 200 K and the Fe-layer saturation magnetization is reduced up to 50%, and there is evidence of a non-collinear spin structure. It is argued that this mainly reflects the properties of pure amorphous Fe.     

Dehydrogenation at the Fe/Lu2O3 interface upon rapid thermal annealing

The interfaces between ferromagnetic electrodes and tunnel oxides play a crucial role in determining the performances of spin-based electronic devices, such as magnetic tunnel junctions. Therefore, a deep knowledge of the structural, chemical, and magnetic properties of the buried interfaces is required. We study the influence of rapid thermal annealing treatments up to 500 °C on the interfacial properties of the Fe/Lu₂O₃ system. As-grown stacks reveal the presence of hydrogenated Fe-Lu-H intermetallic phases at the Fe/Lu₂O₃ interface most likely due to the H absorption on the Lu₂O₃ surface upon exposure to air and/or to the oxide growth. The annealing treatments induce remarkable changes of the structural, chemical, and magnetic properties at the interface, as evidenced at the atomic scale by the sub-monolayer sensitivity of conversion electron Mössbauer spectroscopy. The use of complementary techniques such as X-ray diffraction, time-of-flight secondary ion mass spectrometry, and in situ X-ray photoelectron spectroscopy, confirms that the main effect of the annealing is to gradually promote the dehydrogenation at the Fe/Lu₂O₃ interface.     

Development of magnetic anisotropies in ultrathin epitaxial films of Fe(001) and Ni(001)

Ultrathin films, bcc Fe(001) on Ag(001), fcc Fe(001) on Cu(001) and Fe/Ni(001) bilayers on Ag, were grown by molecular beam epitaxy. A wide range of surface science tools were employed to establish the quality of epitaxial growth. Ferromagnetic resonance and Brillouin light scattering were used to extract the magnetic properties. Emphasis was placed on the study of magnetic anisotropies. Large uniaxial anisotropies with easy axis perpendicular to the film surface were observed in all ultrathin structures studied. These anisotropies were particularly strong in fcc Fe and bcc Fe films. In sufficiently thin samples the saturation magnetization was oriented perpendicularly to the film surface in the absence of an applied field. It has been demonstrated that in bcc Fe films the uniaxial perpendicular anisotropy originates at the film interfaces. In situ measurements indentified the strength of the uniaxial perpendicular anisotropy constant at the Fe/vacuum, Fe/Ag and Fe/Au interfaces asK _us = 0.96, 0.63, and 0.3 ergs/cm² respectively. The surface anisotropies deduced for [bulk Fe/noble metal] interfaces are in good agreement with the values obtained from ultrathin films. Hence the perpendicular surface ansiotropies originate in the broken symmetry at abrupt interfaces. An observed decrease in the cubic anisotropy in bcc Fe ultrathin films has been explained by the presence of a weak 4th order in-plane surface anisotropy,K _1S=0.012 ergs/cm². Fe/Ni bilayers were also investigated. Ni grew in the pure bcc structure for the first 3–6 ML and then transformed to a new structure which exhibited unique magnetic properties. Transformed ultrathin bilayers possessed large inplane 4th order anisotropies far surpassing those observed in bulk Fe and Ni. The large 4th order anisotropies originate in crystallographic defects formed during the Ni lattice transformation.     

X-ray photoelectron spectroscopy study of magnetic films

Ta/NiO_x/Ni₈₁Fe₁₉/Ta films were prepared by rf reactive and dc magnetron sputtering. The exchange coupling field H_ex and the coercivity H_c of NiO_x/Ni₈₁Fe₁₉ as a function of the ratio of Ar to O₂ during the deposition process were studied. The composition and the chemical states in the interface region of NiO_x/NiFe were also investigated using X-ray photoelectron spectroscopy (XPS) and the peak decomposition technique. The results show that the ratio of Ar to O₂ has a great effect on the chemical states of nickel in NiO_x films. The exchange coupling field H_ex and the coercivity H_c of Ta/NiO_x/Ni₈₁Fe₁₉/Ta are thus seriously affected. XPS is shown to be a powerful tool for characterizing magnetic films. Received: 18 July 2001 / Accepted: 21 December 2001 / Published online: 3 June 2002 RID="*" ID="*"Corresponding author. Fax: +86-010/6232-7283, E-mail: guanghua_yu@263.net     

Magnetic domain structures and magnetotransport properties in Co-Ag granular thin films

The magnetic microstructures and magnetotransport properties in granular Co_xAg_1-x films with 17%≤x≤62% were studied. Magnetic force microscopy (MFM) observations showed the presence of magnetic stripe domains in as-deposited samples with x≥45% and the evolution of the magnetic domain patterns to in-plane domains with annealing. A perpendicular magnetic anisotropy as high as about 8×10⁵ ergs/cc for as-deposited Co₆₂Ag₃₈ and about 6×10⁵ ergs/cc for as-deposited Co₄₅Ag₅₅ was observed by magnetization and torque measurements. With increasing annealing temperature, the perpendicular magnetic anisotropy became negative. The origin of the perpendicular magnetic anisotropy may be attributed to a rhombohedral distortion of the cubic cell due to residual substrate-film stresses. The magnetic stripe domains are the consequence of the interplay of the indirect or direct exchange, perpendicular magnetic anisotropy and dipolar interactions. Finally, magnetoresistance (MR) curves displayed training behaviours and different shapes when measured with different configurations (parallel, transverse and perpendicular). It is proposed that the existence and the evolution of the magnetic domain structures strongly affect the magnetotransport properties due to the extra contribution of the electron scattering at the domain walls. Furthermore, an anisotropic MR also contributes to the overall MR curves. Received: 2 March 2000 / Accepted: 28 March 2000 / Published online: 23 May 2001     

Polarized neutron reflectometry of the influence of Fe/Si,Fe/FeSi2 and Au/Fe interfaces on the magnetic properties of epitaxial Fe films

The magnetic and structural properties of epitaxial Fe films grown on Si(1 1 1) are investigated by polarized neutron reflectometry (PNR) at room temperature. The influence of different types of interfaces, Fe/Si, Fe/FeSi₂ and Au/Fe on the magnetic properties of Fe films deposited by molecular beam epitaxy onto Si(1 1 1) are characterized. We observe a drastic reduction of the magnetic moment in the entire Fe film deposited directly on the silicon substrate essentially due to strong Si interdiffusion throughout the whole Fe layer thickness. The use of a silicide FeSi₂ template layer stops the interdiffusion and the value of the magnetic moment of the deposited Fe layer is close to its bulk value. We also evidence the asymmetric nature of the interfaces, Si/Fe and Fe/Si interfaces are magnetically very different. Finally, we show that the use of Au leads to an enhancement of the magnetization at the interface.     

Element-specific magnetization reversal in Fe/Ce multilayers: : a study by X-ray magnetic circular dichroism and the magneto-optic Kerr effect

Fe/Ce multilayers are magnetically soft with coercive fields of a few Oersteds. In this artificial system, the itinerant 5d electrons of Ce are magnetically polarized by hybridization with the spin–split 3d states of Fe. To obtain an insight into the magnetization reversal process, the element selectivity of X-ray magnetic circular dichroism was used to measure the magnetization of the Ce-5d electrons as a function of an applied magnetic field. Comparison with the magnetization curves studied by the magneto-optic Kerr effect, which averages over the whole system, revealed that the coercivity in the hysteresis of the ordered Ce-5d moments is reduced by 50%. We propose that this is an effect of the magnetically disturbed interface or of the complex non-collinear magnetic structure of the Ce layers detected by recent experiments of X-ray resonant magnetic scattering. The results are compared to the X-ray dichroic and Kerr hysteresis loops of the multilayers Fe/La/Ce/La and Fe/CeH_2−δ. These systems are magnetically harder and their coercivities are identical.     

CEMS characterisation of Fe/high-κ oxide interfaces

The interfaces between Fe and different high-κ oxides are investigated by means of conversion electron Mössbauer spectroscopy (CEMS). Information on the magnetic ordering at the interface is obtained from the magnetic hyperfine splitting of the Mössbauer spectra. The reactivity of the Fe atoms at the interface (intermixing) is also estimated by CEMS. X-ray diffraction (XRD) and X-ray reflectivity (XRR) provide additional information on the intermixing and different phases present at the interface. CEM-spectra show the presence of both ferromagnetic and paramagnetic phases. CEMS and XRD results show that the Fe/HfO₂ and Fe/Al₂O₃ interfaces are the least reactive. The degree of intermixing between Fe and the high-κ oxide is determined by the oxide surface roughness.     

The effect of strain and interfaces on the orbital moment in Fe/V superlattices

The dependence of the Fe orbital moment on strain and interfaces in Fe/V superlattices has been investigated by X-ray magnetic circular dichroism (XMCD). The orbital moment was determined to be lower at the interfaces than in the bulk, which we attribute to Fe–V hybridization. An enhancement of the orbital moment with increasing strain in the Fe layers was observed. This enhancement is attributed to an unquenching of the orbital moment. Consequently, the orbital moment of Fe in Fe/V is concluded to be influenced by two competing parameters. It is lowered by increasing interface density, and enhanced by increasing strain.     

Brillouin light scattering from spin waves in magnetic layers and multilayers

We give an overview on our experimental and theoretical investigations of Brillouin light scattering in magnetic thin films, layered magnetic structures and superlattices. For epitaxial Fe(1 10) layers on W(1 10) the in-plane and out-of-plane magnetic surface anisotropy constants are determined, and the influence of Pd overlayers on the surface anisotropies is studied. For Fe/Pd superlattices a magnetic polarization of the Pd at the interfaces is established and the interface anisotropy constant is determined. For second order Fe/Pd superlattices, formed by alternating two Fe/Pd bilayers with different repeat periods, the Brillouin spectrum is obtained and compared to calculations. In the case of magnetic/nonmagnetic multilayered structures we investigate theoretically the crossing regime between dipolar and exchange-dominated modes. For small spacer-layer thicknesses, interlayer exchange coupling shifts the spin-wave frequencies of all but the highest-frequency dipolar mode into the exchange-mode regime. In case of all-magnetic multilayered structures, such as Fe/Ni multilayers, a new type of propagating collective excitations arising from coupled exchange modes is predicted.     

Magnetism of ultrathin Fe(110) films

Application of conversion electron Mössbauer spectroscopy (CEMS) to structural and magnetic analysis of ultrathin films and their interfaces is reviewed. Fe(110) films were prepared on W(110) under UHV conditions and analyzed in situ. CEMS provides detailed information on the mode of growth and film structure and on magnetic hyperfine fields, B _hf. Local structure of B _hf across the film is discussed in relation to modifications of magnetic order caused by the finite (including monolayer) film thickness and by the electronic structure of the interface.     

New applications of the magnetic X-ray circular dichroism method for surface-magnetism investigations in a photoemission electron microscope

It is shown that magnetic X-ray circular dichroism (MXCD) can be exploited in photoemission electron microscopy not only to visualize the domain structure of ferromagnets, but also to perform quantitative measurements of the stray magnetic fields at the domain boundaries. In the general situation, two MXCD images obtained at different extractor voltages are required. In specific cases, however, it suffices to consider a single image, if it is deformed by the stray magnetic fields compared to a known object geometry. The object geometry means its real shape, scratches or other defects. It is also possible to deposit a paramagnetic film structured in the form of stripes or a grid as a reference on the ferromagnetic sample being investigated. Received: 2 August 2001 / Accepted: 6 September 2001 / Published online: 20 December 2001     

Structural and magnetic properties of evaporated Fe thin films on Si(1 1 1), Si(1 0 0) and glass substrates

We present experimental results on the structural and magnetic properties of series of Fe thin films evaporated onto Si(1 1 1), Si(1 0 0) and glass substrates. The Fe thickness, t, ranges from 6 to110 nm. X-ray diffraction (XRD) and atomic force microscopy (AFM) have been used to study the structure and surface morphology of these films. The magnetic properties were investigated by means of the Brillouin light scattering (BLS) and magnetic force microscopy (MFM) techniques. The Fe films grow with (1 1 0) texture; as t increases, this (1 1 0) texture becomes weaker for Fe/Si, while for Fe/glass, the texture changes from (1 1 0) to (2 1 1). Grains are larger in Fe/Si than in Fe/glass. The effective magnetization, 4πM_eff, inferred from BLS was found to be lower than the 4πM_S bulk value. Stress induced anisotropy might be in part responsible for this difference. MFM images reveal stripe domain structure for the 110 nm thick Fe/Si(1 0 0) only.     

Magnetic-dichroism study of iron silicides formed at the Fe/Si(100) interface

The interplay between the phase composition, electronic structure, and magnetic properties of the Fe/Si(100)2×1 interface has been studied at the initial stages of its formation (at Fe doses up to 8 Å). The experiments were carried out in ultra high vacuum by using high-resolution photoelectron spectroscopy with synchrotron radiation. The interface magnetic properties were examined in terms of magnetic linear dichroism in angle-resolved Fe 3p core-level photoemission. It was found that at room temperature a disordered Fe–Si solid solution is formed at the first stage of Fe deposition (≤3.4 Å). In the coverage range of 3.4–4.3 Å the solid solution transforms into Fe₃Si. However, the in-plane ferromagnetic ordering of the silicide occurs only at 6.8 Å Fe that demonstrates the thickness dependence of the magnetic properties of Fe₃Si. The subsequent sample annealing to 150°C transforms Fe₃Si to ε-FeSi, leading to the disappearance of ferromagnetic behavior.     

Field dependence of spin and orbital moments of Fe in L10 FePt magnetic thin films

The field dependence of spin and orbital magnetic moments of Fe in L1₀ FePt magnetic thin films was investigated using X-ray magnetic circular dichroism (XMCD). The spin and orbital moments were calculated using the sum rules; it was found that the spin and orbital moment of Fe in L1₀ FePt films are ∼2.5 and 0.2 μ_B, respectively. The relative XMCD asymmetry at Fe L₃ peak on the dependence of applied field suggested that the majority magnetic moment of L1₀ FePt films resulted from Fe.     

Interface reactions in [Fe/B]<Subscript>n</Subscript> multilayers: a way to tune from crystalline/amorphous layer sequences to homogeneous amorphous Fe<Subscript>x</Subscript>B<Subscript>100-x</Subscript> films

[Fe/B]_{n ≥2} multilayers were prepared by thermal evaporation, ion-beam sputtering and laser ablation. By applying in situ electron spectroscopies (UPS, XPS) and monitoring the electrical resistance during layer growth, evidence could be provided for the occurrence of interface reactions within the range of studied deposition temperatures (77 K ≤T ≤300 K). These reactions result in amorphous Fe_xB_100-x phases, which are spatially restricted to a width of less than 3 nm at the original interface. The amorphicity of the reacted interlayers was unequivocally proven by additional high-resolution electron microscopy (HRTEM) and their characteristically changed magnetic properties. Due to the well-defined width of the interface reaction, homogeneous amorphous Fe_xB_100-x films can be obtained by reducing the individual Fe and B layer thicknesses to below the above reaction depth, while for larger thicknesses layer sequences of the crystalline/amorphous/crystalline type will result. Received: 30 January 2002 / Accepted: 31 January 2002 / Published online: 10 September 2002 RID="*" ID="*"Corresponding author. Fax: +49-731/502-2963, E-mail: hans-gerd.boyen@physik.uni-ulm.de     

Probing depth of the low energy cascade electrons from a transition metal

A surface probing depth of only 2 layers for low energy cascade electrons excited with a 3.2 keV primary electron beam is clearly demonstrated by model experiments with non-magnetic overlayers of Ta on magnetic substrates of Fe/Ni₈₀Fe₂₀. This result establishes a short probing depth of low energy electrons in transition metals generalizing the previously observed short magnetic probing depth for spin-polarized electrons in ferromagnets. The short probing depth sheds new light on a number of spectroscopic observations on ferromagnetic transition metals, and has important implications concerning surface magnetic properties and scattering processes of hot electrons in transition metals.