Aromatic amines as nucleophiles in the Bargellini reaction

Aromatic amines can be employed in the Bargellini reaction to generate useful intermediates. Rapid, practical access to functionalised, privileged structures may have significant utility in the synthesis of drug-like molecules. An improved synthesis of carfentanil analogues illustrates this point.     

Aromatic secondary amines as antioxidants for polyolefins. Part 2: phenothiazines

The thermoxidation of polypropylene (PP) at 200 °C in the presence of phenothiazine (1) and 3,7-di-tert-butylphenothiazine (2) was studied by measuring the oxygen consumption. The rate of oxygen consumption during the induction period passes through a minimum when the antioxidant concentration increases. Both compounds studied have the same critical concentrations but at high concentrations 2 is more efficient than 1. The results obtained may be explained by the differences in the evaporation rate of 1 and 2 during oxidation. ESR signals of radicals originating from 1 and 2 after polymer oxidation at 160 °C were observed.     

The tensile strengths of heterogeneous interfaces: a comparison of static and dynamic first-principles calculations

First-principles molecular dynamics (FPMD) simulations and static quantum chemical (QC) calculations are used to evaluate the tensile strengths, σ(c), of interfaces consisting of (0001) surfaces of α-Al(2)O(3) separated by small organic species. The evaluation of σ(c) with FPMD was achieved by performing simulations in which the simulation cell was extending in a direction normal to the fracture plane until rupture of the interface occurred. The static QC calculations employed an approach which treated fracture of the interface as a competition between uniform extension of the simulation cell and crack formation at the rupture site, which is analogous to that used in the construction of universal binding energy relationships. The results showed that the static QC calculations accurately reproduced the FPMD simulations with respect to tensile strength and the cell extension at which rupture occurred, provided that the rupture site employed in the static calculations matched the site at which rupture occurred during the FPMD simulations. A simple strategy for identifying the rupture site, even in complex systems containing many potential rupture sites, is proposed. Overall, the work extends the calculation of tensile strengths with static QC methods to highly heterogeneous interfaces, thus providing a computationally efficient alternative to demanding FPMD simulations for this purpose.     

Facile Route to Aromatic Hyperbranched Poly（ester amines）

The aromatic hyperbranched poly(ester amines)(AHPEAs) were successfully synthesized via the mild condensation of N-4-cyanobenzyl diethanolamine hydrogenchloride as an AB2 monomer in concentrated HCl. The polymerization was monitored by FTIR to suppose the reasonable reaction mechanism. The degree of branching was determined to be 0.55 by 1H NMR with an increased conversion of up to 96%. The glass transition temperature was measured by differential scanning calorimetry to range from -19 to 15 °C. The molecul...     

Contact chemistry and single-molecule conductance: a comparison of phosphines, methyl sulfides, and amines

We compare the low bias conductance of a series of alkanes terminated on their ends with dimethyl phosphines, methyl sulfides, and amines and find that junctions formed with dimethyl phosphine terminated alkanes have the highest conductance. We see unambiguous conductance signatures with these link groups, indicating that the binding is well-defined and electronically selective. This allows a detailed analysis of the single-molecule junction elongation properties which correlate well with calculations based on density functional theory.     

Aromatic amines — Electron transfer agents which increase the effectiveness of photocatalytic redox reactions

The characteristics are examined of redox photocatalytic systems based on semiconductors containing both electron accepting and electron donating additives which are able to separate the photogenerated charges. The use of aromatic amines as electron transfer agents has been demonstrated experimentally.Translated from Teoreticheskaya Éksperimental'naya Khimiya, Vol. 28, Nos. 5–6, pp. 411–415, September–December, 1992.The authors thank the Ukrainian State Committee on Science and Technology for financial help from the Fund for Fundamental Research.     

Monitoring of aromatic amines by HPLC with electrochemical detection: comparison of methods for destruction of carcinogenic aromatic amines in laboratory wastes

A new chemical method for destruction of carcinogenic aromatic amines in laboratory wastes has been developed. The method is based on enzymatic oxidation of the amines in solution (with hydrogen peroxide and horseradish peroxidase), followed by oxidation of the solid residues with permanganate in sulphuric acid medium. To monitor the efficiency of destruction, a reversed-phase HPLC system has been developed, with voltammetric detection with a carbon-fibre detector, which is substantially more sensitive (detection limits from a few ng down to a few pg of amine) than the commonly used ultraviolet photometric detection. It has been demonstrated that the proposed method of destruction is highly efficient (99.8% destruction).     

A comparison of homogeneous and heterogeneous copper catalyzed arylation of amines

Comparison of the homogeneous and heterogeneous copper-catalyzed arylation of model primary amines with (hetero)-aryl iodides in DMSO revealed a comparable efficiency of CuI and commercially available unsupported copper nanoparticles (25 nm size) in the presence of 2-isobutyryl-cyclohexanone or L-proline.     

Aromatic amines from polyurethane adhesives in food packaging: The challenge of identification and pattern recognition using Quadrupole-Time of Flight-Mass Spectrometry

Toxic primary aromatic amines (PAAs) are reaction products from residual isocyanates in polyurethane adhesives. The maximum migration level of the total sum of PAAs is 10 ng g⁻¹ of food. This paper reports on a method for quantification of 18 PAAs by UHPLC–MS/MS that was optimised and applied to a series of industrial laminates prepared from polyurethane adhesives. Non-intentionally added substances (NIAS), impurities and other migrants were identified by Q-TOF/MS^E. A comparison of the quantitative values obtained by the colorimetric method using NEDA and by UHPLC–MS/MS confirmed that the first method can overestimate the quantification of PAAs. This could be attributed to the impurities and other NIAS present in the plastic laminate. Values of R² in the analytical characteristics of UHPLC–MS/MS were obtained, the best value being 0.9964 and the most unfavourable 0.7626. The detection limit (LOD) and the quantification limit (LOQ) were 2 pg g⁻¹ and 7 pg g⁻¹, respectively. The stability of the PAAs over time in the acidic simulant in contact with the plastic laminate is also reported.     

From amines to diketopiperazines: a one-pot approach

An efficient one-pot synthesis is described for the preparation of 1,4-disubstituted piperazine-2,5-diones starting from a suitable amine and chloroacetyl chloride in the presence of an aqueous base. The resulting chloroacetamide is cyclised in situ by employing the phase-transfer (PT) catalyst, benzyltriethylammonium chloride (TEBA). The products are isolated in excellent yields of up to 90%.     

Separation of amines by ligand exchange : Part III. A comparison of different cation exchangers

The elution behavior of 4 amines, ethanolamine, diethanolanine, dimethylamine and n-butylamine, was studied on 4 cation-exchange resins and zirconium phosphate, all loaded with nickel ions. Aqueous ammonia was used for clution. Different selectivity orders were found with exchangers of different types. The carboxylic cation-exchange resin gave the sharpest bands, but 2% cross-linked sulfonic resin gave the best separation of these amines.     

Design of TTF-based phosphazenes combining a good electron-donor capacity and possible inclusion adduct formation

The physical properties of porous material can be modulated by intercalation of small molecules, whose size, in the case of tris-o-phenylenedioxy)cyclotriphosphazene (TPP)-based materials, vary with the different side groups. Starting from the TPP structure, a series of new derivatives were constructed through the core ring [(NP)(3)] substitution by [(CNH)(3)], [(CO)(3)], and [(CS)(3)] or/and the side group substitution by tetrathiafulvalene and a series of related fragments including bis(ethylenedithio)tetrathiafulvalene, 2-methylene-1, 3-dithiole, and 2-methylene-5,6-dihydro[1,3]dithiolo[4,5-b][1,4]dithiine. In the side fragment, such a substitution corresponds to the replacement of a ring heteroatom, an addition of substituents, or both. With use of theoretical methodologies based on DFT-B3LYP/6-31G* and HF/6-31G*//B3LYP/6-31G* approaches, molecular geometries and electronic properties including the LUMO and HOMO energies, the HOMO-LUMO gap, as well as the ionization potential (IP) were calculated. In comparison with the commonly used organic superconductors, most of the molecules investigated were predicted to show comparable or better electron-donor strength. Interestingly, a number of cyclophosphazene [(NP)(3)]-containing compounds were predicted to show the "paddle wheel" shape responsible for inclusion adducts formation, making these compounds to be potential candidates for organic superconductors with the ease of modulating their conducting properties by intercalation of suitable acceptors.     

Reaction of primary amines with Pt/C catalyst in water under microwave irradiation: a convenient synthesis of secondary amines from primary amines

Upon microwave irradiation in water, Pt/C converts primary amines into secondary amines in good yield via retro-reductive and reductive amination.     

Bond strengths: the importance of hyperconjugation

[Structure: see text] Gronert (J. Org. Chem. 2006, 71, 1209) has challenged the importance of hyperconjugation in determining C-H bond dissociation enthalpies (BDEs) in alkanes. Electron paramaganetic resonance spectra of H3CCH2*, (H3C)2CH*, and (H3C)3C* show significant positive spin on their beta-H3C groups' hydrogens. A 55%/45% partitioning of these spins between hyperconjugation and spin polarization mechanisms linearly correlates with the C-H BDEs in methane, ethane, propane, isobutane and propene. Hyperconjugation is an important factor determining alkane C-H BDEs.     

Synthesis of Chiral Exocyclic Amines by Asymmetric Hydrogenation of Aromatic Quinolin‐3‐amines

Asymmetric hydrogenation of aromatic quinolin‐3‐amines was successfully developed with up to 94 % enantiomeric excess (ee). Introduction of the phthaloyl moiety to the amino group is crucial to eliminate the inhibition effect caused by the substrate and product, to activate the aromatic ring, and to improve the diastereoselectivity. This new methodology provides direct and facile access to chiral exocyclic amines. Notably, this report is the first on the highly enantioselective hydrogenation of aromatic amines.