Dy（III）离子在LiCl-KCl熔盐中的电化学行为及Dy-Ni金属间化合物的选择性制备

采用循环伏安、方波伏安和开路计时电位等电化学方法研究了Dy(III)离子在LiCl-KCl共晶盐中的电化学行为及Dy-Ni合金形成的电化学机理.循环伏安和方波伏安法研究表明, Dy(III)离子的电化学还原过程为三个电子转移的一步反应.与惰性W电极相比, Dy(III)离子在Ni电极上的循环伏安曲线多出了三对氧化还原峰,是由于Dy与Ni形成了合金化合物,导致Dy(III)离子在活性Ni电极发生了欠电位沉积.采用X射线衍射(XRD)和扫描电子显微镜(SEM)附带能量散射谱(EDS)对恒电位(-1.6,-1.8和-2.0 V)电解制备的Dy-Ni合金进行分析,分别获得了DyNi5, Dy2Ni7和DyNi2金属间化合物.实验结果表明,通过控制电位进行恒电位电解可以有选择性地制备不同的金属间化合物.     

在LiCl-KCl-ZnCl_2熔盐体系中电化学共还原提取钕

针对镧系元素钕,本文通过循环伏安、开路计时电位、方波伏安等方法研究了773 K时Nd(III)在钼电极上在LiCl-KCl-ZnCl2熔盐体系中的电化学行为及Zn-Nd合金的形成过程.结果表明:在LiCl-KCl-ZnCl2熔盐中,Nd(III)在预先沉积的Zn阴极上欠电位沉积形成三种Zn-Nd金属间化合物.基于电化学行为研究,采用恒电位电解提取Nd并用方波伏安曲线测量来检测Nd(III)离子浓度的变化,然后通过电解前后Nd(III)离子浓度变化评估了Nd的电解提取效率.实验结果表明:-1.84 V恒电位电解进行50 h后,Nd(III)离子浓度接近于零,提取效率为99.67%.在973 K时通过恒电流电解提取Nd并获得了Zn-Nd合金,通过X射线衍射(XRD)和扫描电子显微镜(SEM)附带能量散射谱(EDS)对合金的相组成和微观形貌进行了分析.XRD分析表明在Zn-Nd合金中存在Nd2Zn17,LiZn和Zn相,EDS能谱分析表明Nd在合金中的原子分数高达14.99%.     

Dy(Ⅲ)离子在LiCl-KCl熔盐中的电化学行为及Dy-Ni金属间化合物的选择性制备

采用循环伏安、方波伏安和开路计时电位等电化学方法研究了Dy(Ⅲ)离子在LiCl-KCl 共晶盐中的电化学行为及Dy-Ni 合金形成的电化学机理. 循环伏安和方波伏安法研究表明, Dy(Ⅲ)离子的电化学还原过程为三个电子转移的一步反应. 与惰性W电极相比, Dy(Ⅲ) 离子在Ni 电极上的循环伏安曲线多出了三对氧化还原峰,是由于Dy与Ni 形成了合金化合物, 导致Dy(Ⅲ)离子在活性Ni 电极发生了欠电位沉积. 采用X射线衍射(XRD)和扫描电子显微镜(SEM)附带能量散射谱(EDS)对恒电位(-1.6, -1.8 和-2.0 V)电解制备的Dy-Ni 合金进行分析, 分别获得了DyNi₅, Dy₂Ni₇和DyNi₂金属间化合物. 实验结果表明, 通过控制电位进行恒电位电解可以有选择性地制备不同的金属间化合物.     

氯化物熔体中铈离子在铁阴极上的电还原

用循环伏安法、充电曲线和衰减曲线研究了在700～850°CNaCl-KCl-CeCl_3熔体中铈离子在铁电极上的还原过程。Ce(Ⅲ)还原时,首先形成金属间化合物,然后析出纯金属铈。用铁阴极电解制取了含83wt％Ce的Ce-Fe合金,其物相为CeFe_2和Ce。     

Pr(III)离子在LiCl-KCl熔体中Bi膜W电极上的电化学行为（英文）

采用循环伏安、方波伏安、计时电位和开路计时电位等电化学方法研究了Pr(III)离子在Li Cl-KCl-Bi Cl_3熔体中W电极上的电化学行为。循环伏安和方波伏安的研究表明,Pr在预先沉积的Bi膜电极上发生欠电位沉积是由于生成了Pr-Bi金属间化合物,导致Pr(III)在Bi膜电极上的还原电位比在W电极上还原电位更正。从开路计时电位曲线可以观察到两相共存的Pr-Bi金属间化合物的两个平台。利用开路计时电位计算了723-873 K温度范围内Pr在Pr-Bi合金中的活度和偏摩尔Gibbs自由能以及Pr-Bi金属间化合物的生成Gibbs自由能。通过恒电位电解,在液态Bi电极上得到了Pr-Bi合金,并采用X射线衍射(XRD)和扫描电子显微镜(SEM)附带能量散射谱(EDS)对样品进行了表征,结果表明所得到的Pr-Bi金属间化合物为Pr Bi_2和Pr Bi。     

氯化钕熔盐电解的阴极过程

本文用循环伏安和计时电位法,在与金属钕处于平衡的KC1-NaCl-NdC1_3熔体中,研究钕离子在铂阴极上的电极过程。结果表明,在该体系中其阴极还原过程为二价钕离子直接放电还原为金属钕,Nd~(2+)+2e→Nd。电极反应为可逆的并受扩散控制,钕的析出电位在本实验条件下约为-3.2V(氯标)。     

在LiCl-KCl共晶熔体中电化学制备钬镍金属间化合物(英文)

采用循环伏安、方波伏安和开路计时电位等方法研究了Ho(Ⅲ)离子在LiCl-KCl共晶熔体中的电化学行为及Ho-Ni合金化机理。在惰性W电极上,Ho(Ⅲ)离子在-2.06 V(vs Ag/Ag Cl)发生电化学还原,该还原过程为3个电子转移的一步反应。与惰性W电极上的循环伏安相比,Ho(Ⅲ)离子在活性Ni电极的循环伏安曲线上还出现了3对氧化还原峰,是Ho与Ni形成了金属间化合物,导致了Ho(Ⅲ)离子在活性Ni电极发生了欠电位沉积。在不同的电位进行恒电位电解制备的3个不同的Ho-Ni合金,采用X-射线衍射(XRD)和扫描电子显微镜-能谱仪(SEM-EDS)等测试手段进行表征,结果表明:制备的3种合金分别是Ho2Ni17,Ho Ni5和Ho Ni23种合金化合物。     

尿素-NaBr低温熔盐中Fe2+和Sm3+的电化学行为及其诱导共沉积

利用循环伏安法、计时电位法和计时电流法 ,研究了尿素$CNaBr熔盐中Fe2 +在Pt,Cu ,Ag及Ti电极上的电化学行为 ,获知Fe2 +电还原为金属铁是一步不可逆过程 ,扩散系数为 2 74× 10 - 6cm2 ·s- 1 ,交换电流密度为 2 6 8× 10 - 5A·cm- 2 。使用循环伏安曲线和断电后的放电曲线研究熔体中Sm3 +的电化学行为 ,表明Sm3 +难以单独沉积 ,但通过加入Fe2 +可以诱导其共沉积。在Cu基体上进行恒电位和恒电流电解 ,得到Sm含量高于 90 % (质量分数 )的Sm Fe合金膜 ;发现Sm含量与阴极电位、电流密度以及SmCl3 /FeCl2 的摩尔比有关。用电镜研究了不同电解方法及钐含量对Sm$CFe合金表面的影响     

Mn（Ⅱ）在LiCl-KCl-MgCl2-MnCl2熔盐体系中的电化学行为

采用循环伏安和计时电位等电化学技术研究了Mn(Ⅱ)在LiCl-KCl-MgCl2-MnCl2熔盐体系中的电还原过程和Mg-Li-Mn合金的共沉积条件.结果显示,在LiCl-KCl-MgCl2-MnCl2熔盐体系中,Mn(Ⅱ),Mg(Ⅱ)和Li(Ⅰ)的还原电位分别为-1.14,-1.78和-2.19 V.Mn先析出,在钼电极表面沉积;Mg在Mn上欠电位沉积生成Mg-Mn合金;而Li在Mg-Mn合金上欠电位沉积形成Mg-Li-Mn合金.实验结果表明,Mn(Ⅱ)在熔盐中的还原电极过程受扩散控制.Mn(Ⅱ)在熔盐中的扩散系数约为10-5 cm2/s.运用XRD技术对恒电流电解制备的Mg-Li-Mn合金进行了分析,结果表明,Mg-Li-Mn合金中含有β-Li,α-Mg和Mn 3个相.     

Electrochemical Behavior of Mn( Ⅱ ) in the Melt LiCkl-KCl-MgCl2-MnCl2

采用循环伏安和计时电位等电化学技术研究了Mn(Ⅱ)在LiCl-KCl-MgCl2-MnCl2熔盐体系中的电还原过程和Mg-Li-Mn合金的共沉积条件.结果显示,在LiCl-KCl-MgCl2-MnCl2熔盐体系中,Mn(Ⅱ),Mg(Ⅱ)和Li(Ⅰ)的还原电位分别为-1.14,-1.78和-2.19 V.Mn先析出,在钼电极表面沉积；Mg在Mn上欠电位沉积生成Mg-Mn合金；而Li在Mg-Mn合金上欠电位沉积形成Mg-Li-Mn合金.实验结果表明,Mn(Ⅱ)在熔盐中的还原电极过程受扩散控制.Mn(Ⅱ)在熔盐中的扩散系数约为10-5 cm2/s.运用XRD技术对恒电流电解制备的Mg-Li-Mn合金进行了分析,结果表明,Mg-Li-Mn合金中含有β-Li,α-Mg和Mn 3个相.     

用于非水介质分析的新型离子选择电极: 水膜电极的设想及验证

本文首次提出了一种新型离子选择电极—水膜电极, 采用水溶液作为液膜, 可分析有机溶液中的组分. 这种电极用于非水介质中的分析 , 有其独特的优点, 可直接测量非水溶液中某种离子的平衡活度(或浓度), 对理论研究有较大的意义. 本文提出的水膜电极能应用于不与水相混溶的低介电常数有机溶剂, 扩展了离子选择电极在非水介质中的研究与应用.     

Electrode process of Nd-Fe alloy formed on iron electrode in molten chlorides

The cyclic voltammetry, convolution voltammetry and chronopotentiometry were used to study the electrode process of Nd (III) reduced on iron electrode in molten NaCl-KCl-NdCl₃ from 700 to 850°C. The electrodeposited products were analysed by X-ray diffraction. The results indicate that the intermetallic compound Fe₂Nd forms first, and then the metallic neodymium deposits when Nd (III) is reduced on iron electrode. The Nd-Fe alloys rich in neodymium can be obtained by electrolysis with iron cathode in molten chlorides. The Nd-Fe alloys are composed of Fe₂Nd and Nd.     

Researches on chemically modified electrode: V. Catalytic reduction of oxygen on iron porphyrin modified electrode

By surface organic synthesis a Fe (III) tetra-o-aminophenyl porphyrin modified electrode was successfully prepared on glassy carbon electrode surface through amidization. The preparative conditions were investigated in detail. Using cyclic voltammetry and semidifferential neo-polarography in an acidic aqueous solution the behavior of the catalytic reduction of oxygen on iron porphyrin modified electrode was studied. Based on experimental results it was shown that the irreversible process of 2-electron-reduction to hydrogen peroxide belongs to EC parallel catalytic process.     

微环电极上线性扫描伏安法可逆波理论

本文提出了微环电极上线性扫描伏安法可逆波理论,对电流、电位的性质进行了详细的论述.得到了P≤ 1, γ≤40适用的峰电流经验式.用微金环和铂环电极在K~4Fe(CN)~6·KCl体系中进行了实验验证,结果与理论相符合.     

Photogalvanic cells: Part XI. The thionine-coated electrode

Studies using ring-disc electrodes, cyclic voltammetry, optical absorption and X-ray photoelectron spectroscopy show that up to twenty monolayers of thionine can be irreversibly coated on to platinum or tin oxide electrodes. On such electrodes the electrode kinetics of the thionine-leucothionine couple are still reversible or quasi reversible. In contrast the reduction of Fe(III) is much slower on a coated electrode compared to a clean electrode. Koutecky-Levich plots show that there is a second potential-independent rate-limiting step. This blocking of the Fe(III) reduction means that the thionine coated electrode is the ideal electrode for a photogalvanic cell using the iron thionine system.     

Electrochemical characterization of the redox couple of Fe(III)/Fe(II) mediated by grafted polymer electrode

A new grafted polymer electrode (GPE) (polystyrene as polymer) was grafted with acrylonitrile as a monomer using gamma irradiation to produce a new grafted polymer. The redox process of K₃Fe(CN)₆ during cyclic voltammetry was studied by the new GPE. The ratio of Ipc/Ipa >1 of GPE to GCE Ipc/Ipa = 1.7, indicating that this electrode is a reversible electrode and can be used in conductivity studies by voltammetric analysis. The physical properties of the new electrode GP have good hardness, insolubility, and stability at different high temperatures and at different pH. Also, the sensitivity under conditions of cyclic voltammetry is significantly dependent on pH, electrolyte, and scan rate. At different scan rates, two oxidation peaks and two reduction peaks of Fe(III) were observed in a reversible process: Fe(III) Fe(II), and Fe(II) Fe(0). Interestingly, the redox reaction of Fe(III) solution using GPE remained constant even after 15 cycles. It is therefore evident that the GPE possesses some degree of stability. The potential use of the grafted polymer as a useful electrode material is therefore clearly evident.     

ZrO(2) gel-derived DNA-modified electrode and the effect of lanthanide on its electron transfer behavior

A new method of immobilizing deoxyribonucleic acid (DNA) was developed based on sol-gel technique, the resulting DNA-modified electrode was characterized with the cyclic voltammetry. The electrode was used to study the electron transfer of DNA in 1.0 mM potassium ferricyanide system in different concentrations of lanthanum(III), europium(III), and calcium(II). The heterogeneous rate constants of the reduction of Fe(CN)(6)(3-) with and without the above cations were calculated by Tafel equation. The results show that lanthanide ions can increase the electron transfer rate much more than calcium ion.     

纳米铂电极的制备及其电化学行为

以镍铬合金为基体,采用电化学方法在其表面沉积制备了纳米Pt电极,用SEM对电极的形貌进行了表征,以亚铁氰化钾为分子探针考察了Pt电极的电化学性能。结果表明该电极对亚铁氰化钾具有稳定、灵敏的电化学响应,并对H2O2的电化学还原具有良好的催化活性。H2O2峰电流与其浓度在0.03-1.0 mmol/L范围内呈良好的线性关系,检出限（S/N=3）为7×10^-6mol/L。相同实验条件下,该纳米Pt电极的催化活性远高于纯Pt电极。     

微环电极上常规脉冲伏安法可逆波理论及其验证

本文推导了微环电极上常规脉冲伏安法电流方程式,对伏安曲线的性质进行了探讨.利用K~4Fe(CN)~6·KCl体系及金和铂微环电极对理论进行了验证,理论与实验结果相符.     

Myoglobin on multi-walled carbon nanotubes modified electrode: direct electrochemistry and electrocatalysis

Electrochemical behavior of myoglobin (Myb) incorporated on multi-walled carbon nanotubes (MWNTs) modified GC electrode is investigated by electrochemical impedance spectroscopy (EIS) and cyclic voltammetry (CV). The results indicate that Myb can be strongly adsorbed on the surface of the MWNT-modified electrode to form an approximate monolayer film. MWNTs can greatly promote the redox of horse heart Myb, on which a pair of well-defined and nearly reversible CV peaks for Myb Fe(III)/Fe(II) redox couple were obtained in pH 7.0 buffers. The formal potential of Myb on MWNT modified electrode shifts linearly with pH with a slope of −56.4 mV/pH, showing that the electron transfer is accompanied by single proton transportation. The high efficiency of the Myb/MWNT modified electrode towards the catalytic electro-reduction of nitric oxide has been observed. Potential application of Myb/MWNT modified electrode as biosensors to monitor NO is proposed.