Dielectric relaxation in BiLi<Subscript>0.6</Subscript>W<Subscript>0.4</Subscript>O<Subscript>3</Subscript> ceramics

The low-frequency process of dielectric relaxation in the new lead-free compound BiLi_0.6W_0.4O₃ prepared by conventional ceramic technology is studied. The features of dielectric relaxation are discussed in terms of a model of interaction between the domain boundaries and point defects of a crystalline lattice.     

Synthesis,Crystal Structure,and Magnetic Properties of the YbFeTi<Subscript>2</Subscript>O<Subscript>7</Subscript> Compound

We report on the synthesis conductions and results of experimental investigations of the crystal structure and magnetic properties of a new magnetic compound YbFeTi₂O₇. According to the X-ray diffractometry data, the crystal structure of the investigated compound is described by the rhombic space group Pcnb with unit cell parameters of a = 9.8115(1) Å, b = 13.5106(2) Å, and c = 7.31302(9) Å and atomic disordering in the distribution of iron ions Fe³⁺ over five structural sites. The magnetic measurements in the lowtemperature region revealed a kink in the temperature dependence of the magnetic moment and its dependence on the sample magnetic prehistory. The experimental results obtained suggest that with a decrease in temperature the sample passes from the paramagnetic state to the spin-glass-like magnetic state characterized by a freezing temperature of T _f = 4.5 K at the preferred antiferromagnetic exchange coupling in the sample spin system. The chemical pressure variation upon replacement of rare-earth ion R by Yb in the RFeTi₂O₇ system does not change the crystal lattice symmetry and magnetic state.     

Dielectric and polar order behaviors of BaTiO<Subscript>3</Subscript>-Bi(Mg<Subscript>1/2</Subscript>Ti<Subscript>1/2</Subscript>)O<Subscript>3</Subscript> ceramics

New perovskite solid solution ceramics of (1−x)BaTiO₃-xBi(Mg_1/2Ti_1/2)O₃ ((1−x)BT-xBMT, x≤0.09) were synthesized by the solid-state reaction technique. X-ray diffraction studies have revealed a stable single perovskite structure for all samples. Dielectric measurements were carried out at different frequencies and temperatures. The polarization evolutions with temperatures were measured to investigate the ferroelectric properties. All the compositions show features of ferroelectrics with diffuse phase transition, though the temperature T _m of their dielectric constant maximum ε _m is frequency dependent. The dielectric constant peak ε(T) of (1−x)BT-xBMT ceramics become broad with increasing BMT content. During the temperature range of ε(T) peak summit, (1−x)BT-xBMT ceramics present quasi-linear dielectric phenomenon under high electric field with very high dielectric constant.     

Statistical mechanics of cation ordering in PbSc<Subscript>1/2</Subscript>Ta<Subscript>1/2</Subscript>O<Subscript>3</Subscript> and PbSc<Subscript>1/2</Subscript>Nb<Subscript>1/2</Subscript>O<Subscript>3</Subscript> solid solutions

A model Hamiltonian for B cation ordering (Sc-Nb(Ta)) in PbSc_1/2Nb_1/2O₃ and PbSc_1/2Ta_1/2O₃ solid solutions is constructed. The parameters of the model Hamiltonian are determined from the ab initio calculation within the ionic crystal model with allowance made for the deformability and the dipole and quadrupole polarizabilities of the ions. The temperatures of the phase transition due to the ordering of the B cations are calculated by the Monte Carlo method in the mean-field and cluster approximations. The phase transition temperatures calculated by the Monte Carlo method (1920 K for PbSc_1/2Ta_1/2O₃ and 1810 K for PbSc_1/2Nb_1/2O₃) are consistent with the experimental data (1770 and 1450 K, respectively). The thermodynamic properties of the cation ordering are investigated using the Monte Carlo method.     

Dielectric and acoustic properties of the new lead-free BiLi<Subscript>0.6</Subscript>W<Subscript>0.4</Subscript>O<Subscript>3</Subscript> ceramic

The properties of the new lead-free compound BiLi_0.6W_0.4O₃, obtained using ceramic technology, were studied by dielectric and mechanical spectroscopy. The anomalies of internal friction are, along with the elastic and dielectric properties observed experimentally at a temperature of 350°C, related to its structural phase transition. Dielectric and mechanical relaxation due to processes of interaction between crystal lattice defects was revealed in the low-temperature phase.     

Dielectric dispersion and magnetic properties of Ba-modified Pb(Fe<Subscript>1/2</Subscript>Nb<Subscript>1/2</Subscript>)O<Subscript>3</Subscript>

The polycrystalline samples of Ba-modified Pb(Fe_1/2Nb_1/2)O₃ (i.e., (Pb_1-xBa_x)(Fe_1/2Nb_1/2)O₃ PBFN, with x=0,0.05,0.07) were synthesized by a mechanosynthesis (i.e., high-energy ball milling) route followed by a mixed oxide method. Structural analysis provides the information on formation of single-phase orthorhombic structure on substitution of a small amount (x=0.07) of Ba at the Pb-site of Pb(Fe_0.50Nb_0.50)O₃ (PFN). The ferroelectric–paraelectric phase transition in PFN was observed at 383 K, which decreases on increasing Ba-concentration in PBFN. Detailed studies of dielectric properties of PBFW show the following: (i) diffuse phase transition, (ii) low loss tangent, (iii) low activation energy, and (iv) low frequency dielectric dispersion. An anomaly in the ac conductivity was found very close to phase transition temperature. The activation energy is found to decrease from 0.19 to 0.01 eV on increasing Ba-concentration to 7% (x=0.07). Temperature field-dependent magnetization measurements of all the samples showed antiferromagnetic transition at ∼15 K (for x=0.07). PBFN sample showed a slight increase in the coercivity (i.e., from 400 Oe (PFN) to 500 Oe (PBFN, for x=0.07) at 2 K. PACS 61.10.Nz; 68.37.Hk; 75.50.Ss; 75.60.Ej; 77.22.Ch; 77.22.Gm     

Enhanced electrochemical properties and thermal stability of LiNi<Subscript>1/3</Subscript>Co<Subscript>1/3</Subscript>Mn<Subscript>1/3</Subscript>O<Subscript>2</Subscript> by surface modification with Eu<Subscript>2</Subscript>O<Subscript>3</Subscript>

Layered LiNi_1/3Co_1/3Mn_1/3O₂ cathode material is synthesized via a sol-gel method and subsequently surface-modified with Eu₂O₃ layer by a wet chemical process. The effect of Eu₂O₃ coating on the electrochemical performances and thermal stability of LiNi_1/3Co_1/3Mn_1/3O₂@Eu₂O₃ cells is investigated systematically by the charge/discharge testing, cyclic voltammograms, AC impedance spectroscopy, and DSC measurements, respectively. In comparison, the Eu₂O₃-coated sample demonstrates better electrochemical performances and thermal stability than that of the pristine one. After 100 cycles at 1C, the Eu₂O₃-coated LiNi_1/3Co_1/3Mn_1/3O₂ cathode demonstrates stable cyclability with capacity retention of 92.9 %, which is higher than that (75.5 %) of the pristine one in voltage range 3.0–4.6 V. Analysis from the electrochemical measurements reveals that the remarkably improved performances of the surface-modified composites are mainly ascribed to the presence of Eu₂O₃-coating layer, which could efficiently suppress the undesirable side reaction and increasing impedance, and enhance the structural stability of active material.     

Lattice dynamics and ferroelectric instability in ordered and disordered PbSc<Subscript>1/2</Subscript>Ta<Subscript>1/2</Subscript>O<Subscript>3</Subscript> and PbSc<Subscript>1/2</Subscript>Nb<Subscript>1/2</Subscript>O<Subscript>3</Subscript> solid solutions

The dynamic Born charges and the frequency spectra of lattice oscillations in the crystals of ordered and disordered PbSc_1/2Ta_1/2O₃ (PST) and PbSc_1/2Nb_1/2O₃ (PSN) solid solutions have been calculated within the framework of the generalized Gordon-Kim model with allowance for the dipole and quadrupole polarizabilities. The phonon spectra of both compounds contain ferroelectric soft modes. The influence of various interactions on the magnitude of dynamic charges and ferroelectric instability in PSN and PST solid solutions has been studied and it is shown that both these charges and the ferroelectric instability are determined by the competition between long-range dipole-dipole interactions and short-range dipole-charge interactions, the determining role played by the interaction of Nb (Ta) cations and oxygen anions in the Nb-O (Ta-O) bond direction.     

Study of ferroelectric phase transitions in disordered PbSc<Subscript>1/2</Subscript>Nb<Subscript>1/2</Subscript>O<Subscript>3</Subscript> and PbSc<Subscript>1/2</Subscript>Ta<Subscript>1/2</Subscript>O<Subscript>3</Subscript> solid solutions

Ferroelectric phase transitions and thermodynamic properties of disordered PbSc_1/2Ta_1/2O₃ and PbSc_1/2Nb_1/2O₃ solid solutions have been investigated by the Monte Carlo method. The parameters of the effective Hamiltonian were calculated within the generalized Gordon-Kim model. The obtained values of the phase-transition temperatures and spontaneous polarization are in satisfactory agreement with the experimental data.     

Preparation of TiO<Subscript>2</Subscript>-coated LiCo<Subscript>1/3</Subscript>Ni<Subscript>1/3</Subscript>Mn<Subscript>1/3</Subscript>O<Subscript>2</Subscript> by electrostatic self-assembly method and its properties

A precursor of TiO₂–LiCo_1/3Ni_1/3Mn_1/3O₂ was prepared by electrostatic self-assembly method. The final product was obtained by heating the precursor at 400–450 °C for 4–6 h in air. X-ray diffraction (XRD), scanning electron microscope (SEM), X-ray photoelectron spectroscopy (XPS), and electrochemical tests were used to examine the structural, morphology, elementary valence, and electrochemical characteristics. XRD indicated that the TiO₂-coated material can be indexed by α-NaFeO₂ layered structure, which belongs to hexagonal-type space group R3m. XPS results confirmed the existence of TiO₂ compound on the surface of the coated sample. The SEM image showed that the material had spherically porous morphology with the uniform size about 6 μm. The initial charge–discharge capacity of the TiO₂-coated LiCo_1/3Ni_1/3Mn_1/3O₂ material was 168.8/160.0 mAh/g. After 60 cycles, the discharge capacity of the TiO₂-coated LiCo_1/3Ni_1/3Mn_1/3O₂ sample was 147.0 mAh/g, and the coulombic efficiency was 94.0%. Compared with the uncoated sample, the electrochemical performance of TiO₂-coated LiCo_1/3Ni_1/3Mn_1/3O₂ was improved.     

Thermal conductivity of Na<Subscript>2</Subscript>W<Subscript>2</Subscript>O<Subscript>7</Subscript> crystal

The thermal conductivity of Na₂W₂O₇ single crystal has been studied along the main crystallographic directions at temperatures of 50–573 K. A low thermal conductivity is found to correlate with a significant difference in the cation weight.     

Acoustic emission and thermal expansion of Pb(Mg<Subscript>1/3</Subscript>Nb<Subscript>2/3</Subscript>)O<Subscript>3</Subscript> and Pb(Mg<Subscript>1/3</Subscript>Nb<Subscript>2/3</Subscript>)O<Subscript>3</Subscript>-PbTiO<Subscript>3</Subscript> crystals

The temperature dependence of the elongation per unit length for Pb(Mg_1/3Nb_2/3)O₃ crystals unannealed after growth and mechanical treatment is investigated in the course of thermocycling. It is revealed that this dependence deviates from linear behavior at temperatures below 350°C. The observed deviation is characteristic of relaxors, is very small in the first cycle, increases with increasing number n of thermocycles, and reaches saturation at n≥3. In the first cycle, a narrow maximum of the acoustic emission activity is observed in the vicinity of 350°C. In the course of thermocycling, the intensity of this maximum decreases and becomes zero at n>3. For (1?x)Pb(Mg_1/3Nb_2/3)O₃-xPbTiO₃ crystals, the dependence of the temperature of this acoustic emission maximum on x exhibits a minimum. It is assumed that the phenomena observed are associated with the phase strain hardening due to local phase transitions occurring in compositionally ordered and polar nanoregions.     

Properties of an Al<Subscript>2</Subscript>O<Subscript>3</Subscript>/Si interface

The phase chemical composition of an Al₂O₃/Si interface formed upon molecular deposition of a 100-nm-thick Al₂O₃ layer on the Si(100) (c-Si) surface is investigated by depth-resolved ultrasoft x-ray emission spectroscopy. Analysis is performed using Al and Si L_{2, 3} emission bands. It is found that the thickness of the interface separating the c-Si substrate and the Al₂O₃ layer is approximately equal to 60 nm and the interface has a complex structure. The upper layer of the interface contains Al₂O₃ molecules and Al atoms, whose coordination is characteristic of metallic aluminum (most likely, these atoms form sufficiently large-sized Al clusters). The shape of the Si bands indicates that the interface layer (no more than 10-nm thick) adjacent to the substrate involves Si atoms in an unusual chemical state. This state is not typical of amorphous Si, c-Si, SiO₂, or SiO_x (it is assumed that these Si atoms form small-sized Si clusters). It is revealed that SiO₂ is contained in the vicinity of the substrate. The properties of thicker coatings are similar to those of the 100-nm-thick Al₂O₃ layer and differ significantly from the properties of the interfaces of Al₂O₃ thin layers.     

Synthesis and electrochemical properties of P2-Na<Subscript>2/3</Subscript>Ni<Subscript>1/3</Subscript>Mn<Subscript>2/3</Subscript>O<Subscript>2</Subscript>

The pure phase P2-Na_2/3Ni_1/3Mn_2/3O₂ was synthesized by a solid reaction process. The optimum calcination temperature was 850 °C. The as-prepared product delivered a capacity of 158 mAh g^?1 in the voltage range of 2–4.5 V, and there was a phase transition from P2 to O2 at about 4.2 V in the charge process. The P2 phase exhibited excellent intercalation behavior of Na ions. The reversible capacity is about 88.5 mAh g^?1 at 0.1 C in the voltage range of 2–4 V at room temperature. At an elevated temperature of 55 °C, it could remain as an excellent capacity retention at low current rates. The P2-Na_2/3Ni_1/3Mn_2/3O₂ is a potential cathode material for sodium-ion batteries.     

Ferromagnetic/antiferromagnetic exchange coupling in SrFe<Subscript>12</Subscript>O<Subscript>19</Subscript>/CoO composites

The surface of SrFe₁₂O₁₉ coated with a CoO layer reveals a strong exchange bias characterized by magnetic hysteresis loops. The low-temperature coercivity, H_C, and the squareness, M_R/M_S, of a permanent magnet of SrFe₁₂O₁₉/CoO powder prepared by the sol–gel method are enhanced after field cooling through the Néel temperature (T_N=290 K) when compared to those after zero-field cooling. The existence of loop shifts and the enhancement of H_C indicate that exchange-bias effects, which are induced by the ferromagnetic/antiferromagnetic (FM/AFM) exchange-coupling interactions, are responsible for these behaviors. According to our experimental results, some of the factors controlling the exchange bias, such as FM/AFM interfaces and the CoO amount of the antiferromagnetic layer, are discussed. PACS 75.30.Et; 75.50.Ee; 75.60.Ej; 75.60.Gm; 75.70.Cn     

Dielectric Properties of Nanoporous Al<Subscript>2</Subscript>O<Subscript>3</Subscript> Films Filled with Ferroelectric SC(NH<Subscript>2</Subscript>)<Subscript>2</Subscript>

Temperature dependences of permittivity ε′ and third harmonic amplitude γ_3ω of nanocomposites obtained by embedding ferroelectric SC(NH₂)₂ in porous alumina films with pore sizes of 60 and 100 nm are studied. A substantial increase in the temperatures of ferroelectric phase transition T_c1 and T_c2 and that of phase transition T_i from incommensurate phase to paraphase are also observed. The temperatures of all phase transitions are found to rise as pore diameters shrink.     

Ionic displacements and structure of disordered PbFe<Subscript>1/2</Subscript>Nb<Subscript>1/2</Subscript>O<Subscript>3</Subscript>

A sequence of structural models of unit cells of complex oxides with perovskite-type structure has been constructed to refine the average structure of PbFe_1/2Nb_1/2O₃ (PFN) at temperatures above the ferroelectric Curie point (T _C ～ 110°C). Owing to the analysis of the probability theory considerations, each model is characterized by only two positional fitting parameters. With the use of the intensities of 95 symmetrically independent X-ray reflections from a PFN single crystal at 160°C, a model with the R factor below 3% (K = 2.44%) was chosen. The ravine method has been used to verify the existence of a single minimum for the R factor with respect to the fitting parameter.     

Temperature evolution of the dielectric response function of Pb(Fe<Subscript>0.95</Subscript>Sc<Subscript>0.05</Subscript>)<Subscript>2/3</Subscript>W<Subscript>1/3</Subscript>O<Subscript>3</Subscript> relaxor ceramics in a wide frequency range

Electrodynamic properties of Pb(Fe_0.95Sc_0.05)_2/3W_1/3O₃ solid solution belonging to A(B'B'')O₃ perovskite structural family have been investigated by broadband dielectric spectroscopy in a wave-number range of (4 × 10^–9–4 × 10³) cm^–1 and a temperature range of 100–600 K. The influence of low-frequency relaxations on the vibrational spectrum is determined within the four-parameter factorized dispersion model. Anomalies in the behavior of the dielectric response function are found near the temperature-diffuse maximum of permittivity.