爆轰法制备纳米TiO2及其参数控制

 采用偏钛酸与炸药混合进行爆轰合成，制备出晶粒尺寸在10 nm到60 nm之间的纳米TiO₂粉末。结合XRD、TEM、BET等表征手段，研究了纳米TiO₂的制备参数与其晶粒尺寸和晶相结构之间的关系。发现当炸药含量增加时，产物晶粒尺寸增大，同时晶相结构随炸药量的增加逐渐由低温的锐钛矿型和板钛矿型向高温的金红石型转变，爆轰温度在这种转变过程中起着极为重要的作用。     

Effects of iron oxide nanoparticles on polyvinyl alcohol: interfacial layer and bulk nanocomposites thin film

Iron oxide (α-phase) nanoparticles with coercivity larger than 300 Oe have been fabricated at a mild temperature by an environmentally benign method. The economic sodium chloride has been found to effectively serve as a solid spacer to disperse the iron precursor and to prevent the nanoparticles from agglomeration. Higher ratios of sodium chloride to iron nitrate result in smaller nanoparticles (19 nm for 20:1 and 14 nm for 50:1). The presence of polyvinyl alcohol (PVA) limits the particle growth (15 nm for 20:1 and 13 nm for 50:1) and favors nanoparticle dispersion in polymer matrices. Obvious physicochemical property changes have been observed with PVA attached to the nanoparticle surface. With PVA attached to the nanoparticle surface, the nanoparticles are found not only to increase the PVA cross-linking with an increase in melting temperature but also to enhance the thermal stability of the PVA. The nanoparticles are observed to be uniformly dispersed in the polymer matrix. Scanning electron microscopy (SEM) microstructure also shows an intermediate phase with a strong interaction between the nanoparticles and the polymer matrices, arising from the hydrogen bonding between the PVA and hydroxyl groups on the nanoparticle surface. The addition of nanoparticles favors the cross-linkage of the bulk PVA matrices, resulting in a higher melting temperature, and an enhanced thermal stability of the polymer matrix.     

Lattice-vibration spectra of paradibromobenzene nanoparticles

The experimental low-frequency Raman spectra of paradibromobenzene nanoparticles of 400-60 nm in size have been recorded. The line frequencies decrease with a decrease in the nanoparticle size and the line half-widths change as well. The nanoparticle sizes have been determined with an electron microscope. The nanoparticle structure has been modeled by the molecular-dynamics method and the histograms of lattice-vibration spectra has been calculated by the Dean method. When the nanoparticle sizes change from 400 to 60 nm the lattice parameter along the crystallographic axis a increase, while the parameters along the two other axes decrease. Overall, the nanoparticle structure is similar to that of paradibromobenzene single crystals.     

Study of the composite based on iron-containing nanoparticles dispersed in the polyethylene matrix

A composite representing a system of iron-based nanoparticles about 5 nm in size embedded in a high-pressure polyethylene matrix has been studied. The technology of preparation of this material has been described. The transmission electron microscopy, X-ray powder diffraction, and nuclear gamma-resonance spectroscopy data presented have been used to establish the volumes of the metal and oxide phases of a nanoparticle and the composition of its oxide shell.     

Particle size effect on magnetotransport properties of nanocrystalline Nd<Subscript>0.7</Subscript>Sr<Subscript>0.3</Subscript>MnO<Subscript>3</Subscript>

Nanocrystalline samples with an average particle size of 40 and 52 nm have been synthesized by citrate-complex auto-ignition method. Magnetic properties of the samples show para- to ferromagnetic transition at around 135 K. The electron magnetic resonance (EMR) study on these samples indicates the presence of coexistence of two magnetic phases below 290 K. Electrical resistivity follows variable range hopping (VRH) mechanism in the paramagnetic regime. The magnetoresistance (MR) data has been analysed by spin dependent hopping between the localized spin clusters together with the phase-separation phenomenon. These clusters are assumed to be formed by distribution of canted spins and defects all over the nanoparticle. In addition, the hopping barrier depends on the magnetic moment orientation of the clusters. The magnetic moments of the clusters are narrowly oriented in ferro- and are randomly oriented in paramagnetic phase. The ferromagnetic phase contributes to the total MR at low applied magnetic fields whereas the paramagnetic phase contributes at relatively high fields in both the samples. The average cluster size in ferromagnetic phase is bigger than that in paramagnetic phase. It is also observed that the cluster size, in ferromagnetic phase, in 52 nm sample is bigger than that in the 40 nm sample. However, the average cluster size in paramagnetic phase is almost same in both the samples.     

Ag/AgCl纳米粒子的制备及其共振散射光谱研究

以AgCl纳米粒子作晶种,在柠檬酸三钠存在条件下,AgCl纳米粒子表面结合的银离子被光化学还原而获得Ag/AgCl复合纳米粒子。研究了Ag/AgCl纳米粒子的光谱特性,在310和590nm处产生二个共振散射峰,在400nm处产生一个吸收峰。     

铝纳米颗粒的热物性及相变行为的分子动力学模拟

采用分子动力学方法模拟了纳米金属铝在粒径为0.8-3.2 nm 时的熔点、密度和声子热导率的变化, 研究了粒径为1.6 nm的铝纳米颗粒的密度、比热和声子热导率随温度的变化. 采用原子嵌入势较好地模拟了纳米金属铝的热物性及相变行为, 根据能量-温度曲线和比热容-温度曲线对铝纳米颗粒的相变温度进行了研究, 并利用表面能理论、尺寸效应理论对铝纳米颗粒熔点的变化进行了分析. 随着纳米粒径的不断增大, 铝纳米颗粒的熔点呈递增状态, 当粒径在2.2-3.2 nm时, 熔点的增幅减缓, 但仍处于递增趋势. 随着纳米粒径的增大, 铝纳米颗粒的密度呈单调递减, 热导率则呈线性单调递增, 且热导率的变化情况符合声子理论. 随着温度的升高, 粒径为1.6 nm的铝纳米颗粒的密度、热导率均减小. 该模拟从微观原子角度对纳米材料的热物性进行了研究, 对设计基于铝纳米颗粒的相变材料具有指导意义.     

Structural properties of amorphous TiO<Subscript>2</Subscript> nanoparticles

Structural properties of amorphous TiO₂ spherical nanoparticles have been studied in models with different sizes of 2 nm, 3 nm, 4 nm and 5 nm under non-periodic boundary conditions. We use the pairwise interatomic potentials proposed by Matsui and Akaogi. Models have been obtained by cooling from the melt via molecular dynamics (MD) simulation. Structural properties of an amorphous nanoparticle obtained at 350 K have been analyzed in detail through the partial radial distribution functions (PRDFs), coordination number distributions, bond-angle distributions and interatomic distances. Moreover, we show the radial density profile in a nanoparticle. Calculations show that size effects on structure of a model are significant and that if the size is larger than 3 nm, amorphous TiO₂ nanoparticles have a distorted octahedral network structure with the mean coordination number Z_Ti-O ≈6.0 and Z_O-Ti ≈3.0 like those observed in the bulk. Surface structure and surface energy of nanoparticles have been obtained and presented.     

Silver nanoparticles as matrix for laser desorption/ionization mass spectrometry of peptides

Silver nanoparticle synthesized from chemical reduction has been successfully utilized as a matrix in matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF-MS) of peptides. Acting as a substrate to adsorb analytes, as well as a transmission medium for UV laser, silver nanoparticle was found to assist in the desorption/ionization of peptides with little or no induced fragmentation. The size of the nanoparticle was typically in the range of 160 ± 20 nm. One of the key advantages of silver nanoparticle for peptides analysis is its simple step for on-probe sample preparation. In addition, it also minimizes the interferences of sodium dodecyl sulfate (SDS) surfactant background signal, resulting in cleaner mass spectra and more sensitive signal, when compared to α–cyano-4-hydroxycinnamic acid (CCA) matrix.     

Investigation of halloysite nanotubes with deposited silver nanoparticles by methods of optical spectroscopy

Halloysite nanotube composites covered by silver nanoparticles with the average diameters of 5 nm and 9 nm have been studied by methods of optical spectroscopy of reflectance/transmittance and Raman spectroscopy. It has been established that silver significantly increases the light absorption by nanocomposites in the range of 300 to 700 nm with a maximum near 400 nm, especially for the samples with the nanoparticle size of 9 nm, which is explained by plasmonic effects. The optical absorption increases also in the long-wavelength spectral range, which seems to be due to the localized electronic states in an alumosilicate halloysite matrix after deposition of nanoparticles. Raman spectra of nanocomposites reveal intense scattering peaks at the local phonons, whose intensities are maxima for the samples with the silver nanoparticle sizes of 9 nm, which can be caused by plasmonic enhancement of the light scattering efficiency. The results show the ability to use halloysite nanotube nanocomposites in photonics and biomedicine.     

One-step synthesis of dye-incorporated porous silica particles

Fluorescent nanoparticles have a variety of biomedical applications as diagnostics and traceable drug delivery agents. Highly fluorescent porous silica nanoparticles were synthesized in a water/oil phase by a microemulsion method. What is unique about the resulting porous silica nanoparticles is the combination of a single-step, efficient synthesis and the high stability of its fluorescence emission in the resulting materials. The key of the success of this approach is the choice of a lipid dye that functions as a surrogate surfactant in the preparation. The surfactant dye was incorporated at the interface of the inorganic silica matrix and organic environment (pore template), and thus insures the stability of the dye?Csilica hybrid structure. The resulting fluorescent silica materials have a number of properties that make them attractive for biomedical applications: the availability of various color of the resulting nanoparticle from among a broad spectrum of commercially dyes, the controllablity of pore size (diameters of ~5?nm) and particle size (diameters of ~40?nm) by adjusting template monomer concentration and the water/oil ratio, and the stability and durability of particle fluorescence because of the deep insertion of surfactant??s tail into the silica matrix.     

Synthesis, surface morphology, and optical and structural properties of CdS and ZnS nanoparticles

Synthesis of CdS and ZnS nanoparticles in reverse micelles and organic solvents has been carried out. Particles with a hexagonal structure 2–5 nm in size are formed during synthesis. Maintaining the reaction mixture at room temperature leads to the formation of nanoparticles with a cubic structure 100–150 nm in size. The changes in the optical properties of CdS and ZnS nanoparticles, depending on the synthesis method and conditions and on the precursors used, have been investigated. The luminescence characteristics of local surface defects of nanoparticles depend weakly on nanoparticle sizes. The dependence of the fluorescence and phosphorescence intensity of nanoparticle surface defects on the polarity of surrounding solution is demonstrated; thus, these particles can be used as polarity indicators.     

Gas sensing behavior of SnO1.8:Ag films composed of size-selected nanoparticles

Size-selected SnO_1.8:Ag mixed nanoparticle films have been prepared using a gas phase condensation method. Transmission electron microscopy showed that the applied size-selection technique yields well-defined, monodisperse and spherical SnO_1.8 and Ag nanoparticles, both with a fixed diameter of 20 nm. The technique allows an independent variation of the particle size of both materials as well as the concentration of Ag. It allows to assess the influence of these parameters on the gas-sensing properties of the films, here for ethanol vapor in synthetic air. SnO_1.8:Ag nanoparticle films show optimal values of the sensor signal and response time at a Ag nanoparticle concentration of 5%. Due to the fact that the Ag nanoparticles are clearly distinct from the SnO_1.8 nanoparticles in the film, the most probable mechanism leading to improved sensor properties is chemical sensitization via a spill-over effect.     

纳米硅粒子的表面氧化及其光致发光特性

采用射频等离子体增强化学气相沉积技术制备了纳米晶硅粒子,并对其溶液发光的稳态和瞬态特性进行了研究.稳态光致发光结果显示,新制备的纳米硅粉体表现为峰值位于440 nm附近的蓝色发光,经长时间氧化后,该波段发光强度显著增强,并且出现另一峰值位于750 nm附近的红色发光带.不同波长激发和时间分辨光致发光谱的分析表明,纳米硅...     

AFM investigation of nanoparticles formed on silicon surface by femtosecond laser pulses

It is shown by atomic force microscopy that nanoparticles formed upon ablation of surface of single-crystal and porous silicon by femtosecond laser pulses have a lateral size from several tens to 200 nm and a height from 2 to 30 nm. Dependences of the nanoparticle sizes and surface concentrations on the residual pressure, which demonstrate the gas atmosphere influence on the nanoparticle formation, are obtained.     

Phase coexistence in gallium nanoparticles controlled by electron excitation

In gallium nanoparticles 100 nm in diameter grown on the tip of an optical fiber from an atomic beam we observed equilibrium coexistence of gamma, beta, and liquid structural phases that can be controlled by e-beam excitation in a highly reversible and reproducible fashion. With 2 keV electrons only 1 pJ of excitation energy per nanoparticle is needed to exercise control, with the equilibrium phase achieved in less than a few tenths of a microsecond. The transformations between coexisting phases are accompanied by a continuous change in the nanoparticle film's reflectivity.     

All-optical phase-change memory in a single gallium nanoparticle

We report on the first demonstration of a quaternary-logical resonatorless optical memory element with information encoded in the structural phase of a single 80 nm gallium nanoparticle. The size of the memory element is comparable with bits in next-generation hard disks, and radically smaller than previously suggested memories exploiting optical resonators. Furthermore, the energy required for switching the nanoparticle is an order of magnitude less than needed in DVD, DVR, or hard disk technologies.     

Pulsed-laser generation of gold nanoparticles with on-line surface plasmon resonance detection

Size of nanoparticles is an important parameter for their applications. The real-time monitoring is required for reliable and reproducible production of nanoparticles with controllable size. We present results of our research on development of the system for the online nanoparticle characterization during their production by a laser. The laser ablation chamber which allows measurements of surface plasmon resonance spectra during the nanoparticle generation process has been designed and fabricated. The online characterization system was tested by producing and modification of gold nanoparticles. Nanoparticles were generated by nanosecond-laser (wavelength 1064 nm) ablation of gold target in deionized water, and optimal conditions for the highest nanoparticle productivity were estimated. The mean diameter of nanoparticles was determined using their absorption spectra measured in the real-time during the ablation experiments and from the TEM images analysis, and it varied from 20 to 45 nm. The mismatch between nanoparticle diameters, estimated using these two methods, is due to the polydispersity of the generated nanoparticles. The further experiments of laser-induced modification of colloidal gold nanoparticles were carried out using second harmonic (wavelength 532 nm) of nanosecond Nd:YAG laser and alteration in nanoparticle size were acquired by the online measurement system.     

Optical and nonlinear optical characteristics of the Ge and GaAs nanoparticle suspensions prepared by laser ablation

The laser ablation of Ge and GaAs targets placed in water and ethanol was carried out using the fundamental radiation of nanosecond Nd:YLF laser. The results of preparation and the optical and nonlinear optical characterization of the Ge and GaAs nanoparticle suspensions are presented. The considerable shift of the band gap energy of the nanoparticles compared to the bulk semiconductors was observed. The distribution of nanoparticle sizes was estimated in the range of 1.5-10 nm on the basis of the TEM and spectral measurements. The nonlinear refractive indices and nonlinear absorption coefficients of Ge and GaAs nanoparticles were defined by the z-scan technique using second harmonic radiation of picosecond Nd:YAG laser (λ = 532 nm).     

Effect of nanoparticles on the magnetic properties of Mn–Zn soft ferrite

In this paper, the effect of nanostructures on the magnetic properties like the specific saturation magnetization (σ_S) and the coercivity (H_C) for Mn_0.4Zn_0.6Fe₂O₄ ferrite prepared by the co-precipitation method has been presented. We have shown by means of X-ray diffraction that the resulting ferrite is made up of nanoparticles, and that the average size of these nanoparticles calculated with the Scherrer formula depends upon the sintering temperature. When the sintering temperature is increased from 500 to 900 °C, the average nanoparticle diameter varies from 19.3 to 36.4 nm. The nanoparticle phase is further confirmed by scanning electron microscopy (SEM). Both results are found to be in good agreement. The magnetic properties are explained on the basis of the single-domain and multi-domain theory.