Feed Adjustment Chemistry for Hanford 101-SY and 103-SY Tank Waste: Attempts to Oxidize the Non-Pertechnetate Species

More than 50% of the technetium in Hanford 101-SY and 103-SY tank waste is not pertechnetate (TcO₄ ^–). These non-pertechnetate species (TcN) are stable, soluble, reduced complexes of technetium. In order to remediate these waste, it will be necessary to oxidize these species to TcO₄ ^–. For radioanalytical purposes, oxidation requires digestion in Ce(IV)/16M HNO₃. Many oxidants are ineffective. Sodium peroxydisulfate, sodium peroxydisulfate/silver(I), and ozone oxidize all of the technetium species to pertechnetate.     

Co-hydrolysis products of tetraethoxysilane and methyltriethoxysilane in the presence of tetramethylammonium ions

Tetracethoxysilane (TEOS) and methyltriethoxysilane (MTEOS) have been co-hydrolyzed in methanolic solutions containing tetramethylammonium ions that only affect polymerization of silicate species (hydrolysis products of TEOS) to form the Si₈O ₂₀ ^8– cubic octameric silicate species. The effects of water content and TEOS-to-MTEOS molar ratio on the distribution of species formed in the solutions have been investigated with the trimethylsilylation technique and ²⁹Si n.m.r. spectroscopy. Formation of Si₈O ₂₀ ^8– and the cubic octameric species consisting of both Si(O^–)₄ and CH₃Si(O^–)₃ units, (CH₃)_nSi₈O _20–n ^(8–n)– (n=1–5), is found in the solutions. The increase of water content in the solutions solely results in increasing yield of Si₈O ₂₀ ^8– in spite of the presence of hydrolysis products of MTEOS together with those of TEOS, suggesting that water in the solutions plays an important role in the formation of Si₈O ₂₀ ^8– with the aid of tetramethylammonium ions. The TEOS-to-MTEOS molar ratio varies the distribution that is kept under control by the water content, increasing yields of (CH₃)_nSi₈O _20–n ^(8–n)– (n=1, 2). It is found that the water content and TEOS-to-MTEOS molar ratio determine the reaction conditions effective for the formation of CH₃Si(O^–)₃ unit-containing cubic octameric species.     

Spectroscopic Study of the Interaction of the Pd(acac)(C3-acac)PPh3Complex with BF3OEt2 in the Presence of PPh3

The interaction between the components of a catalytic system Pd(acac)(C³-acac)PPh₃+nPPh₃+ mBF₃OEt₂(where n= 1–4, m= 0.25–4, and acac is the acetylacetonate ligand) in benzene is examined by UV and IR spectroscopy. With a relative excess of PPh₃(n> m), acacH and [Pd(acac)(PPh₃)₂]⁺BF^– ₄were the main products, whereas BF₂acac and a polynuclear complex of PdF₂with PPh₃also containing Pd²⁺(BF^– ₄)₂units were formed with a relative excess of BF₃OEt₂(n< m).     

Copper(I) complexes of nitrogen-sulphur ligands. 1-Phenyl-4,6-dimethylpyrimidine-2-thione and its protonated form as ligands in copper(I) complexes. Chemical,spectroscopic, conductivity and polarographic studies

Summary 1-Phenyl-4,6-dimethylpyrimidine-2-thione (L) and its protonated cation 1-phenyl-4,6-dimethyl pyrimidinium-2-thione , have been employed to prepare the following copper(I) complexes: CuXL (X=Cl, Br, I, ClO₄ or BF₄), (CuX)₃L₂ (X=Cl, Br, I or SCN), (CuX)₂L₅ (X= ClO₄ or BF₄) and the zwitterionic species CuXY(LH) X=Y=Cl, Br or I; X=Br; Y=Cl; X=I; Y=Br). Chemical analysis, conductivity, and near-and far-i.r. spectroscopic data are presented and the chemical relationships between them discussed in terms of postulated dinuclear or polynuclear species for the complexes. Metalligand vibrations suggest that the neutral ligand is N, S-bidentate in its copper(I) complexes as well as S-coordinat for the cation in the zwitterionic compounds. Diagnostic i.r. bands frequencies of counterions and (Cu–X) modes indicate the coordinating character of Cl^–, Br^–, I^–, SCN^– and of ClO ₄ ^– , BF ₄ ^– (in CuXL) anions. For the chloro-complexes CuClL and (CuCl)₃L₂, salt-like species of the [CuL₂][CuCl₂] and [{Cu₂L₂Cl}_n] [CuCl₂]_n type respectively, are proposed. The polarographic data for the perchlorate complexes have shown that in dimethylformamide (DMF) solution, the prevailing species are CuClO₄L, CuClO₄L₂ and (CuClO₄)₂L₅; their overall stability constants were determined.     

Copper(II)–Ammonia Complexation Equilibria in Aqueous Solutions at Temperatures from 30 to 250°C by Visible Spectroscopy

The spectra of copper(II)–ammonia solutions in 2 mol-kg^–1 NH₄NO₃(aq) were recorded as a function of pH with a new UV–visible flow cell, capable of operating at conditions up to 325°C and 300 bars. Equilibrium constants for the formation of copper(II)–ammonia complexes Cu(NH₃)_n ²⁺, 1 n 4, from 30 to 150°C were determined by evolving factor analysis and nonlinear least-squares regression. Measurements at higher temperatures were limited by thermal decomposition of NH₄NO₃(aq). The formation constants of Cu(NH₃)_n ²⁺ decrease with temperature, consistent with extrapolations of literature data from measurements below 100°C. Measurements above 150°C were carried out in 0.5 mol-kg^–1 CF₃SO₃H (aq), at the very high ammonia concentrations required to avoid the precipitation of CuO(s). The spectra are consistent with Cu(NH₃)₄ ²⁺ as the predominant species, based on extrapolations of peak maxima and molar absorptivities from lower temperatures. Shifts in the spectra of Cu²⁺ and the Cu(NH₃)_n ²⁺ species to higher wavelength and increases in molar absorbance with increasing temperature are discussed in terms of the structure of the complexes.     

A new method for the spectrophotometric determination of pertechnetate with tris(1,10-phenanthroline)iron(II) ion

A new spectrophotometric determination of technetium has been developed by means of the solvent extraction of tris(1,10-phenanthroline)iron(II) ([Fe(phen)₃ ²⁺]) with pertechnetate into nitrobenzene. The concentration of technetium can be determined by measuring the characteristic absorbance at 516 nm (=11,700M^–1·cm^–1) in the organic phase. An important feature of the proposed method is that the concentration of pertechnetate can be determined without complicated processes such as the reduction of pertechnetate and the subsequent formation of a colored chelate.     

The Effect of N-alkyl Substitution on Binding of Polycarboxylic Anions by Linear Polyammonium Cations

The interaction between three N-alkyl-substituted polyamines[1,1,4,4-tetramethylethylenediamine, 1,1,4,7,7,-pentamethyldiethylenetriamine,and 1,1,4,7,10,10-hexamethyltriethylenetetramine; general formula C_3nN_nH_(7n+2)] with fourpolycarboxylic ligands (malonate, citrate, 1,2,3-propanetricarboxylate, and1,2,3,4-butanetetracarboxylate) has been studied potentiometrically in aqueous solution at25°C. For all the systems, the species ALH_r (r = 1, 2 ... n + m – 1;n and m are the maximum degrees of protonation for the amine A and the carboxylicligand L, respectively) are formed. The stability of these species is quite high(in particular, that of species with r = n and r = n + 1) and is a linear functionof the charges involved in the formation reaction. The effect of N-alkyl substitutionis quite small: comparison with the analogous unsubstituted polyamines C_(2n–2)N_nH_(5n–2) shows only a small decrease in stability. On average we have–G ^o/n = 5.9 kJ-mol^–1 for N-alkyl-substitutedamines and 6.6 kJ-mol^–1 for unsubstituted ones (ndenoting the number of possible salt bridges). Other linear charge—stabilityrelationships are considered.     

Aqueous uranyl complexes. 3. Potentiometric measurements of the hydrolysis of uranyl(VI) ion at 25°C

Potentiometric titrations of uranyl(VI) solutions were conducted using a standard glasslcalomel electrode combination over the pH range 3 to 12 at 0.1 molkg^–1 ionic strength with tetramethylammonium trifluoromethanesulfonate as the supporting electrolyte. The electrodes were calibrated directly on the hydrogen ion concentration scale during the initial stage of each titration. The species, UO ₂ ²⁺ , (UO₂)₂(OH) ₂ ²⁺ , (UO₂)₃(OH) ₅ ⁺ , (UO₂)₃(OH) ₇ ^– , (UO₂)₃(OH) ₈ ^2– , and (UO₂)₃(OH) ₁₀ ^4– identified in an earlier Raman study were compatible with the analysis of the titration data. Based on this analysis and application of the extended Debye-Hückel treatment, the polynuclear species indicated above were assigned overall formation constants at 25°C and at infinite dilution of –5.51±0.04, –15.3±0.1, –27.77±0.09, –37.65±0.14, and –62.4±0.3, respectively. The results are discussed in reference to hydrolysis quotients reported in the literature for the first three species. Formation quotients for the last two species have not been reported previously.     

A calorimetric study ofN,N-dimethylformamide complexes of copper(II) in acetonitrile

Complex formation of copper(II) with N,N-dimethylformamide(DMF) has been investigated calorimetrically in acetonitrile at 25°C. Calorimetric titration curves obtained are explained in terms of formation of [Cu(dmf) _n ]²⁺ (n=1–4, 6) and their formation constants, enthalpies and entropies were determined. Formation of [Cu(dmf)₅]²⁺ is uncertain. The stepwise enthalpies S ₃ ⁰ and entropies S _n ⁰ at each consecutive step are all negative except for S ₃ ⁰ . The overall enthalpies of formation of [Cu(dmf)₆]²⁺ is –(77.8±5.4) kJ-mol^–1, which is compared with the enthalpy of transfer of copper(II) ion, H _t ^o =–79.7 kJ-mol^–1, from acetonitrile to DMF.     

Thermodynamics of complexation of zinc(II) with chloride,bromide and iodide ions in hexamethylphosphoric triamide

The complexation of zinc(II) with chloride, bromide and iodide ions has been studied by calorimetry in hexamethylphosphoric triamide (HMPA) containing 0.1 mol-dm^–3 (n-C₄H₉)₄NClO₄ as a constant ionic medium at 25°C. The formation of [ZnX_n]^(2–n)+ (n=1,2,3,4 for X=Cl; n=1,2 for X=Br, I) is revealed, and their formation constants, enthalpies and entropies were determined. It is proposed that the zinc(II) ion is fourcoordinated in HMPA and the coordinating HMPA molecules are stepwise replaced with halide ions to form [ZnX_n(hmpa)_4–n]^(2–n)+ (n=1–4), as is the case for the cobalt(II) ion. Furthermore, the formation of [ZnClI], [ZnBrI], [ZnBrCl] and [ZnBrCl₂]^– is revealed in the relevant ternary systems. It is found that the affinity of a given halide ion X^– to [ZnCl]⁺, [ZnBr]⁺ and [Znl]⁺ is practically the same.     

Investigation of the complex formation of technetium with thiourea by spectrophotometry and electromigration

TcO ₄ ^– is reduced by thiourea /tu/ to Tc/III/ in 6N HCl. By capillar electrophoresis three different cations have been identified with electrophoretic mobilities of u=/4.3–4.8/x10^–4 u=/3.2–3.8/x10^–4, and u=/2.2–2.8/x10^–4 cm² v^–1s^–1. These species were assigned to complex cations [Tc/tu/₆]³⁺, [Tc/tu/₅Cl]²⁺, and [Tc/tu/₄Cl₂]⁺, respectively. [Tc/tu/₆]³⁺ was identified by spectrophotometry according to recently published data. [Tc/tu/₅Cl]²⁺ was isolated and chemically characterized. The formation of the monovalent cation [Tc/tu/₅Cl₂]⁺ was concluded from spectrophotometrical measurements.     

Force constant calculations of the LAM-1 modes ofn-alkanes and their substituted α-Monohalo- and α,ω-dihalo- species in their extended zig-zag planar configurations as found in urea inclusion compounds

Force constants were determined for the C₈, C₁₀, C₁₂ and C₁₄ series ofn-alkanes C _n H_{2n + 2} using an approximate SVFF calculation and observed LAM = 1 wave numbers. In this calculation the hydrogen atoms were neglected and only the carbon backbone chain and terminal atoms were considered; this was valid since only low-frequency vibrations were under consideration. Using force constant transfer, the wavenumbers of the LAM = 1 accordion modes for the analogous -C_n H_2n + 1 X and ,-C_n H_2nX₂ species, where X = C1, Br or I were calculated. For -chloroalkanes and ,-dichloroalkanes, them = 1 accordion modes are calculated to be in the 220–130 cm^–1 and 200–120 cm^–1 regions, respectively. For the bromo- and iodo-analogues them = 1 accordion modes are calculated to be in the 200–100 cm^–1, 150–90 cm^–1 and in the 170–100, 135–80 cm^–1 regions, respectively.     

Some N-alkyl-naphthylazo pyridinium salts as new reagents for the spectrophotometric determination of anionic surfactants

Summary Eleven pyridinium azo dyes with straight-chain alkyl groups C_nH_2n+1–(n=6–18) and bromoalkyl groups BrC_mH_2m–(m=6–12) were synthesized with the intention of developing reagents for the determination of low levels of anionic surfactants in an aqueous medium. The effect of the alkyl chain length of these reagents on the reactivity with anionic surfactants such as sodium dodecylsulphate (SDS), sodium linear-dodecylbenzenesulphonate (DBS), sodium dodecylsulphonate (DS) and sodium laurate (SL) was studied. It was found that the alkyl chain length played an important role in the formation of ion associates and the composition of the ion associates formed. These reagents were classified into four groups with respect to the reactivity with anionic surfactants. The first group (n,m=6) reacts only with DBS. The second group (n,m=8) reacts with SDS, DBS and DS. The third group (n,m=10, 12) reacts with SDS, DBS and DS; however, the colour intensity of the DBS-ion associate was unstable. The fourth group (n=14, 16, 18) reacts with all anionic surfactants examined, and the composition of the ion associates with SDS and DS was 2:1 ([reagent]/[surfactant]) though that of the ion associates of the three reagent groups mentioned above was 1:1. The optimal conditions for the determination of anionic surfactants in river water with 1-octyl-4-(4-aminonaphthylazo)-pyridinium bromide was examined. The calibration graph was linear up to 3×10^–6 mol/l, and the apparent molar absorptivity of the ion associate was 3.8×10⁴ l mol^–1 cm^–1 (at 427 nm). The relative standard deviation for 2.4×10^–6 mol/l SDS was 4.9%. Recoveries of 88–107% were found for 8.0×10^–7 mol/l SDS in river water samples.     

Untersuchungen zur Chlorokomplexbildung des Gallium(III)-kations in wäßriger Lösung

Using aqueous GaCl₃ and chloride containing Ga(ClO₄)₃ solutions measurements have been carried out to investigate the formation of complexes with mixed ligands beside the [GaCl₄]^– ion. In contrast to the Raman spectra, which contain only the signals of the [GaCl ₄ ^– ] and the [Ga(H₂O)₆]³⁺ ion, the⁷¹Ga-NMR spectra give clear evidence for the existence of complexes with mixed ligands. Investigations at low temperatures showed their coordination to be octahedral resulting in species [GaCl_n(H₂O)_6–n ]^(3–n)+.     

Structure and Composition of the Anionic Chloride Complexes of Copper(II) as the Precursors of Catalysts for C–Cl Bond Metathesis

The chloride complexes of copper(II) (catalysts or catalyst precursors for various reactions of halogenated hydrocarbons) were characterized using electron, EPR, and EXAFS spectroscopy. It was found that chlorocuprates occur as mononuclear ([CuCl₄]^2–), binuclear ([Cu₂Cl₆]^2–), and, probably, polynuclear species in chlorobenzene solutions. The Cu–Cl bond length in [CuCl₄]^2– is 2.25 ± 0.2 Å, which is close to the same values for crystalline tetrachlorocuprates. It was assumed that the chloride complexes of copper with counterions occur as globules in chlorobenzene.     

Co-hydrolysis products of tetraethoxysilane and methyltriethoxysilane in the presence of tetramethylammonium ions: Part 2 [1]

²⁹Si NMR peaks due to species with the double four-membered ring siloxane backbone composed of both Si(O^–)_4/2 and CH₃Si(O^–)_3/2 units, (CH₃) _n Si₈O _{20 – n} ^{/(8 – n) –} (n=1–3), formed by co-hydrolysis of tetraethoxysilane and methyltriethoxysilane in the presence of tetramethylammonium ions in methanol have been assigned. It has been found that ²⁹Si NMR peaks due to Si(OSi)₃(O^–) units shift to lower frequencies by replacement of the adjacent Si(O^–)_4/2 units by CH₃Si(O^–)_3/2 units, in other words, with increasing m value in Si[OSi(O^–)₃]_{3 – m} [OSi(CH₃) (O^–)₂] _m (O^–) (m=0–2). Peaks from CH₃ Si(OSi)₃ units in the species have also appeared as separated due to the kind of neighbor structural units. On the basis of the assignments, positions of CH₃Si(O^–)_3/2 units in the cubic octameric siloxane framework of (CH₃) _n Si₈O _{20 – n} ^{/(8 – n) –} (n=2, 3), for both of which three isomers are present, have been estimated.     

The Complexes of Holmium with Methylenediphosphonate and 1-Hydroxyethylidenephosphonate

The composition and stability of holmium methylenediphosphonate (MDP) and 1-hydroxyethylidenephosphonate (HEDP) complexes were studied by potentiometric titration methods in 0.1M NaCl at 25 °C. It was found that besides L^4– anions the protonated H _n L^(4–n)– species (n = 1–3 for MDP and n = 1–4 for HEDP) are present in the pH region 3 to 10. The presence of the undissociated acids (H₄L) has not been unambiguously proved for MDP. The complexes of the composition HoH _n L (n varies from 1 to –2 for MDP and from 1 to –1 for HEDP) have been found if the concentration of the ligand is higher than the concentration of holmium. The protonation constants of both acids and the stability constants of the complexes discussed were determined and the comparison with literature data of analogical complexes of other lanthanides was performed.     

Titration calorimetric determination of the pairwise interaction parameters of glycerol,D-threitol,mannitol, and D-glucitol in dilute aqueous solutions

Enthalpic pairwise interaction parameters, h_jj, were determined by titration calorimetry at 25°C for dilute solutions of glycerol, D-threitol, manitol, and D-glucitol in water. The parameters for these and other polyols conform to the expression h_jj (J-kg^–1)=145+135n_OH–21.5n _OH ² –41.7 _dl ² -160.5n_dlld, where n_OH=n_C is the number of hydroxyl groups (carbon atoms), n_dl is the number of dl configuration of a vicinal pair of OH-groups, and n_dlld is the number of such configurations in the polyol molecules. A rationalization of this expression is given.     

Thiolato-technetium complexes. 4(1): Synthesis,characterization and electrochemical properties of bis(1,2-bis(dimethylphosphino)-ethane)technetium(III) complexes with arene-thiolato ligands

Summary The reaction of trans-[Tc^v(OH)(O)(DMPE)₂]²⁺ (DMPE = 1,2-bis(dimethylphosphino)ethane) with a series of arenethiols in base produces the novel complexes cis-[Tc^III-(SC₆H₄X-p)₂ (DMPE)₂]⁺ for X = H, Cl, Me, OMe, t-Bu. One of the complexes has been characterized by X-ray crystallography: cis-[Tc(SPh)₂(DMPE)₂]PF₆, chemical formula Tc₁S₂P₅F₆C₂₄H₄₂, crystallizes in the orthorhombic space group P2₁nb with Z = 4 and lattice parameters a = 9.311(1) Å, b=11.190(2) Å, c = 31.936(4) Å, Vol = 3327.3(8) ų. The final weighted R-value was 0.033. Averaged structural parameters are Tc—S = 2.29(2) Å, Tc—P (trans to P) = 2.42(1) Å, Tc—P (trans to S) = 2.49(3) Å, Tc—S—C = 118.5(5)°. The complexes have been characterized by FAB mass spectrometry and u.v.-vis. spectroscopy. The visible region charge transfer bands are diagnostic for cis geometry in the [Tc(SR)₂(DMPE)₂]⁺ complexes. Electrochemical and spectroelectrochemical measurements show reversible Tc^III/II redox couples in the range -0.19V to -0.38V versus Ag/AgCl (3 M NaCl). Irreversible couples are exhibited at ca. -1.1 V to -1.2 V for Tc^II/I and +0.7V to +0.9V for Tc^IV/III. Variation in redox potential is discussed in terms of sulphur nucleophilicity.On leave from the Department of Chemistry, The University of Tsukuba, Tsukuba, Ibaraki 305, Japan.On leave from Dipartimento di Chimica dell'Universita' di Sassari, Via Vienna, 2-Sassari, Italy.