Crystal structure of tris(triphenylphosphine) palladium

N. S. Kurnakov Institute of General and Inorganic Chemistry, Academy of Sciences of the USSR. Translated from Zhurnal Strukturnoi Khimii, Vol. 28, No. 4, pp. 103–106, July–August, 1987.     

Reactions of benzylchlorobis(triphenylphosphine)palladium(II) with dimethyl acetylenedicarboxylate

Benzylchlorobis(triphenylphosphine)palladium(II) reacted with dimethyl acetylenedicarboxylate to give [Pd[C(CO₂Me)=C(CH₂Ph)(CO₂Me)]Cl(PPh₃)₂] (II) and [(Ph₃P)ClPdμ-C(CO₂Me)=C(CO₂Me)PdCl(PPh₃) (III). Complexes II and III reacted with Tl(acac) to afford [PdC(CO₂Me=C(CH₂Ph)(CO₂Me)-(acac)(PPh₃)] and [(Ph₃P)(acac)Pdμ-C(CO₂Me)=C(CO₂Me)Pd(acac)(PPh₃)], respectively.     

Crystal structure of tetrakis(triphenylphosphine)palladium(0)

Crystal structure of widely employed precatalyst [Pd(Ph₃P)₄] is reported. It crystallizes in P-3 space group [a = 19.0828(8) and c = 26.4423(18) Å] with six molecules per unit cell. It is demonstrated that the phase purity of this important compound can now be routinely controlled via powder X-ray diffraction analysis.     

Extraction-spectrophotometric determination of uranium(VI) with PAR and N-octylacetamide

A new and simple method for selective spectrophotometric determination of uranium(VI) with 4-(2-pyridylazo)resorcinol (PAR) and N-octylacetamide into benzene over pH 7.0–9.0 is described. The molar absorptivity of the complex with 9 different amides is in the range of (0.40–3.2)·10⁴ 1·mol^–1·cm^–1 at the absorption maximum. Out of these, the most sensitive compound N-octylacetamide (OAA) was chosen for detailed studies in the present investigation. The detection limit of the method is 0.008 g U·ml^–1. The system obeys Beer's law in the range of 0–5 g U·ml^–1. The method is free from interferences of most of the common metal ions except vanadium(V) and copper(II), which are masked by proper masking agents. The composition of the complex is determined by curve-fitting method. The method has been applied for the recovery of the metal from rock samples and synthetic mixtures.     

四(三苯基膦)化钯催化的若干菲啶类化合物的合成

邻甲酰基芳基硼酸与取代邻溴苯胺经四(三苯基膦)化钯催化偶联缩合, 合成了9个菲啶衍生物。邻溴苯胺的取代基无论是吸电子或供电子基团, 反应均可顺利进行。     

Reaction of palladium (I) carbonyl acetate with phosphorus-containing ligands and the molecular structure of tris(triphenylphosphine)palladium

Conclusions Neutral and cationic carbonyl-containing palladium (II) complexes with phosphine ligands have been synthesized; they are not very stable in solution and undergo disproportionation to give palladium (0) and (II) compounds. The structure of one of these disproportionation products, namely, tris(triphenylphosphine)palladium, was solved by x-ray structural analysis.Translated from Izvestiya Akademii Nauk SSSR, Seriya Khimicheskaya, No. 4, pp. 894–897, April, 1987.     

Extraction-spectrophotometric determination of traces of palladium by reaction between zinc(II) dibenzyldithiocarbamate and palladium(II)/2-(5-bromo-2-pyridylazo)-5-diethylaminophenol

The simple and highly sensitive determination of palladium is based on the reaction between Pd(II)/5-Br-PADAP and Zn(II) DBDTC complexes in 1,2-dichloroethane or toluene at pH 9.7. At 530 nm, the molar absorptivity is about 0.8 × 10⁵ l mol ^?1 cm ^?1. Beer's law is obeyed in the concentration range 0.1–1.2 μg ml ^?1 Pd. Relative standard deviations are 2–5%. Metal ions reacting with either of the organic reagents interfere.     

Extraction-spectrophotometric determination of germanium(IV) with mandelic acid and malachite green

A method has been developed for determination of germanium, based on complexation with mandelic acid and extraction of the ion-associate formed with Malachite Green (MG) into chlorobenzene. A weakly acidic aqueous solution (pH 2.5-3.5) at room temperature is used and indirect determination is achieved by measuring the absorbance of MG in the extract, at 628 mn. The calibration graph is linear over the range (0.17-8.63) x 10(-6) (0.05-2.50 mug of germanium); the apparent molar absorptivity is 1.33 x 10(5) 1.mole(-1).cm(-1). The interferences from Fe, Ti, Sn(IV), Mo, and SB(III) can be eliminated by addition of trans-1,2-diaminocyclohexanetetra-acetic acid and sodium diethyldithiocarbamate.     

Extraction-spectrophotometric determination of chromium with Nitrotetrazolium Blue

The interaction of Cr(VI) and Nitrotetrazolium Blue has been examined. A 12 NTB (CrO₃Cl)₂ ion-associate is formed and is extractable into 1,2-dichloroethane. The optimum conditions have been established. The molar absorptivity at 260 nm was (8.2 ± 0.06) × 10⁴L mol^–1cm^–1. Beer's law was obeyed in the range 0.01–0.4 g ml^–1 Cr(VI). A sensitive and selective method for determination of micro-quantities of Cr(VI) in soils and steels is suggested.     

Extraction-spectrophotometric determination of vanadium with 5,5′-dithiodisalicylhydroxamic acid (DTDSHA)

A new method for the extraction-spectrophotometric determination of V(V) is proposed. The violet complex V(V)-5,5′-dithiodisalicylhydroxamic acid formed in aqueous medium (pH 5.0) is extracted into a solution of trioctylmethylammonium chloride (Adogen 464) in toluene, and its spectrophotometric characteristics are studied. The stoichiometry of the complexes formed is 1:1 and 2:1 (reagent:vanadium), and 1:3 for the ionic association complex (2:1):trioctylmethylammonium ion. The system follows Beer's law at pH 5.0 (λ = 550 nm) over the concentration range 0.4 to 2.0 ppm (ε = 7.34 × 10³ liter · mol⁻¹ · cm⁻¹). The method is applied for the determination of vanadium in steel.     

Extraction-spectrophotometric determination of iron(III) by means of quinaldic acid-N-oxide

Summary A simple and sensitive method for the determination of iron(III) is described. It is based on the extraction of the yellow-coloured complex of iron with quinaldic acid-N-oxide in chloroform. The absorption maximum is at 380 nm with molar absorptivity ₃₈₀=1.03 · 10⁴. Beer's Law is obeyed over the range 0.6–6 ppm iron with relative standard deviation of +-0.3% (Sandell sensitivity 0.005 g/ml/cm²). The absorbance of the reagent blank is however high with consequent occasional disturbances, which are avoided when measured at 395 nm; molar absorptivity ₃₉₅=7.4 · 10³; effective concentration range 3–8 ppm iron with relative standard deviation +-0.5% (Sandell sensitivity 0.008g/ml/cm²). A fairly large number of common ions do not interfere. Job's method of continuous variations and Asmus method indicate a iron-reagent ratio of 13. Heterogeneous formation constant is K _D =2 · 10⁸.

---

Extraktionsphotometrische Bestimmung von Eisen(III) mit Chinaldinsäure-N-oxid

Zusammenfassung Die einfache und empfindliche Bestimmung beruht auf der Extraktion des gelben Komplexes von Eisen(III) mit Chinaldinsäure-N-oxid in Chloroform. Das Absorptionsmaximum liegt bei 380 nm mit dem molaren Extinktionskoeffizient ₃₈₀=1.03 · 10⁴. Das Beersche Gesetz gilt im Bereich 0,6–6 ppm Eisen. Die relative Standardabweichung beträgt+-0,3% (Sandell-Empfindlichkeit 0,005g/ml/cm²). Die Absorption der Blindprobe ist jedoch hoch und verursacht manchmal Störungen, die beim Messen bei 395 nm vermieden werden; molarer Extinktionskoeffizient ₃₉₅= 7,4 · 10³; im Konzentrationsbereich 3–8 ppm Eisen beträgt die relative Standardabweichung+-0,5% (Sandell-Empfindlichkeit 0,008g/ml/cm²). Eine ziemlich große Zahl von Fremdionen bewirkt keine Störung. Methoden nach Job und Asmus liefern ein Verhältnis Eisen/Reagens wie 13. Die heterogene Bildungskonstante beträgt K _D =2 · 10⁸.