层合闭口厚柱壳的温度应力

基于层合柱壳混合状态方程和边界条件的弱形式，建立了两端固支层合闭口柱壳的温度应力混合方程，给出了任意厚度合闭口柱壳在温度荷载和机械荷载共同作用下的解析解。     

任意厚度层合闭口柱壳的轴对称温度应力

基于层合柱壳混合状态方程和边界条件的弱形式，在轴对称情况下，建立了两端固支层合闭口柱壳的温度应力混合方程，给出了任意厚层合柱壳在温度荷载和机械荷载共同作用下的解析解。     

圆柱壳在外压和轴向冲击联合作用下的稳定性实验研究

本文利用AMT铝合金三种不同厚度的圆柱壳,在常外压和不同轴向冲击载荷作用下的柱壳塑性动力屈曲问题。实验发现除了通常文献中提到的临界速度Vc1外,还有一个使柱壳发生较大变形而破坏时所对应的一个临界遵度Vc2。文章重点研究Vc2与轴向变形。柱壳厚度等之间关系以及柱壳屈曲形式。     

任意厚度层合开口柱壳的温度应力

基于层合柱壳混合状态方程和边界条件的弱形式,建立了具有固支边的层合开口柱壳的温度应力混合方程,给出了任意厚度层合开口柱壳在温度荷载和机械荷载共同作用下的解析解。     

用传递矩阵法计算圆柱壳轴压失稳极值点载荷

从含初缺陷的非线性柱壳方程出发，导出了屈曲状态量的非线性方程。用传递矩阵法（ｔｒａｎｓｆｅｒｍａｔｒｉｘ）进行迭代求解，得到了圆柱壳受轴压失稳极值点临界载荷，并与ＫｏｉｔｅｒＡｒｂｏｃｚ的结果作了比较。     

加肋开孔柱壳混合有限条——有限元屈曲分析

本文提出了一种分析环加肋开孔柱壳屈曲问题的混合有限条──有限元法。环加肋柱壳作为一个构造上的正交各向异性壳处理，柱壳非开孔区采用有限条元离散，开孔区采用有限单元离散。在有限条元与有限单元交界面上，根据位移协调条件建立条元和单元的耦合关系，并据此构造一种特殊的过渡单元、联接条元和单元，进行整体分析。算例表明，这一方法对开孔柱壳屈曲问题的分折十分有效。     

叠层连续柱壳热应力问题的弱形式研究

建立了弹性力学基本方程的弱形式,从而得到叠层连续柱壳混合状态方程的边界条件放在一起的算子方程,扩大了求解空间,给出叠层连续闭口柱壳在热荷载和机械荷载作用下的解析解。     

几何非线性对旋转园柱壳振动特性的影响

本文动用有限元法，采用九结点超参数壳单元计算放置园柱壳的振动特性，考虑了横向剪切以及轴向变形的影响。对于旋转园柱壳达到平衡位置以前的状态，用大变形非线笥板壳理论处理，并假设园柱壳在平衡位置附近作微振动，建模中考虑了科氏力，离心力，初应力以及由大变形引起的几何非线性的影响，通过对一个一固定一端自由的旋转园柱壳在考虑和不考虑大变形几何非线性这两种情况下的比较，阐明了在高速时大变形下几何一性对旋转壳的固     

变厚度柱壳水池的极限分析与优化设计

变厚度柱壳水池的极限分析等厚度柱壳水池的极限分析,已被用不同的方法研究过.其实象贮水池一类柱壳,由于载荷的特点,从经济观点来考虑,采用等厚度截面并不适宜.因此,本文研究线性变厚度柱壳水池的承载能力问题,并从优化设计的角度来考虑柱壳截面尺寸的合理选择.     

含有压电层的各向同性圆柱壳结构的双稳态特性分析

分析了上下表面含有压电层材料的各向同性壳体结构的双稳态特性.通过分析壳体结构内力与中面应变和柱壳曲率增量之间的关系,建立了含有压电材料的各向同性弹性柱壳的力学模型,推导给出了结构系统的弹性应变能的数学表达式.根据最小势能原理推导出实现圆柱壳双稳态的条件方程.结果表明,柱壳双稳态特性与结构系统初始曲率及电场作用形式有关.当满足一定条件时,柱壳具有双稳态,其对应于第二个平衡状态,即柱壳的第二个(卷曲)稳定状态.同时,建立了含有压电材料各向同性壳体结构的有限元模型,对其卷曲过程进行了数值模拟,获得了结构系统稳态卷曲半径和应力分布.理论与数值模拟结果的比较验证了理论模型的正确性.     

Weak formulation of mixed state equation and boundary value problem of laminated cylindrical shell

IntroductionBasedonthree-dimensionalelasticitytheory,exactsolutionofhomogeneousisotropic,orthotropic,andlaminatedplatesandshellshasbeenstUdiedll]-[61,respeChvely.Butallofabovepapersadoptedrigorousequilibriumandboundarycondihons,andtheirsolutioncanbereliedonlyonspecialtechnique.Thusthosemethodswouldbedifficulttobepopularized.Ref.[7]clarifiedtheimportanceofdriedstateequationofelasticity,andfirStgaveHndltoncanonicalequationbymodifyingHellinger-Reissuervariationalprinciple.AtthesametimeTangL'I…     

弱粘结的斜交铺设层合圆柱壳的柱形弯曲

导出了两端简文的具有弱粘结界面的任意斜交铺设层合圆柱壳柱形弯曲问题的一个精确弹性理论解。分析中采用线性弹簧模型来表征界面的弱粘结特性。引进新的物理量改写了基本方程,导出了对应的状态空间列式,并利用变量替换技术将该状态方程转换成常系数状态方程,从而方便求解。最后给出了数值算例,并讨论了弱界面的影响。     

Three-dimensional solution of smart laminated anisotropic circular cylindrical shells with imperfect bonding

This paper presents an exact solution for a simply-supported and laminated anisotropic cylindrical shell strip with imperfect bonding at the off-axis elastic layer interfaces and with attached anisotropic piezoelectric actuator and sensor subjected to transverse loading. In this research, the imperfect interface conditions are described in terms of linear relations between the interface tractions in the normal and tangential directions, and the respective discontinuities in displacements. The solution for an elastic (or piezoelectric) layer of the smart laminated cylindrical shell strip is obtained in terms of the six-dimensional (or eight-dimensional) pseudo-Stroh formalism, solution for multilayered system is then derived based on the transfer matrix method. Finally, a numerical example is presented to demonstrate the effect of imperfect interface on the static response of the smart laminated cylindrical shell. The derived solutions can serve as benchmark results to assess various approximate shell theories and numerical methods.     

ACTIVE CONTROL OF THE PIEZOELASTIC LAMINATED CYLINDRICAL SHELL''''S VIBRATION UNDER HYDROSTATIC PRESSURE

IntroductionDuetotheintrinsicdirectandconversepiezoelectriceffects,piezoelectricmaterialscanbeeffectivelyusedtoproducesensorsoractuatorsfortheactiveshapeorvibrationcontrolostructures.Therefore,theuseofpiezoelectricmaterialsinintelligentstructuresattractedmanyattentionsinrecentyears.Thedesignofsuchactivesystemsrequiresgoodunderstandingofthemechanical_electricinteractionbetweenthestructuresandpiezoelectricmaterials.Manyinvestigationshavebeendoneinthisfield[1].However,mostofthesestudiesarebasedo…     

The solution of weak formulation for axisymmetric problem of orthotropic cantilever cylindrical shell

Weak formulation of equilibrium equations including boundary conditions of laminated cylindrical shell is presented, and thermal stresses mixed state equation for axisymmetric problem of closed cantilever cylindrical shell is established. A unified approach and weak solutions are obtained for closed laminated cantilever cylindrical shell of arbitrary thickness under thermal and mechanical loadings. The equation and boundary conditions proposed in this paper are weakened, the method of this paper would be easy to popularize in dynamics analysis of elasticity. Foundation item: the National Natural Science Foundation of China (19392305)     

Analytical solution for axisymmetric problem of thick laminated closed cantilever shells in hamilton system

By giving up any assumptions about displacement models and stress distribution, the mixed state Hamilton equation for the axisymmetric problem of the thick laminated closed cantilever cylindrical shells is established. An identical analytical solution is obtained for the thin, moderately thick and thick laminated closed cantilever cylindrical shells. All equations of elasticity can be satisfied, and all elastic constants can be taken into account. This work is supported by the National Natural Science Foundation of China.