Syntheses and polymerizations of some vinyl monomers containing nitro- or fluorophthalimides

4-Nitro-N-vinylphthalimide ( 4 ) was synthesized by two different procedures. Compound 4 was not polymerizable or copolymerizable by AIBN. Poly(N-vinylphthalimide) ( 17 ) was prepared and partially nitrated at 10–25°C. N,N′-(1,2-Ethanediyl)bis(4-nitrophthalimide) ( 15 ) and N,N′-(1,3-propanediyl)bis(4-nitrophthalimide) ( 16 ) were prepared by the condensation of the corresponding diamine with phthalic anhydride followed by nitration of the condensation products. 4-Nitrophthalic anhydride was prepared by the hydrolysis of 15 . Four styrene-substituted phthalimide monomers were synthesized. These include N-(4-vinylphenyl)phthalimide ( 25a ), N-(4-vinylphenyl)-3-fluorophthalimide ( 25b ), N-(4-vinylphenyl)-3-nitrophthalimide ( 25c ), and N-(4-vinylphenyl)-4-nitrophthalimide ( 25d ). Monomers 25a and 25b were polymerized by freeradical initiator (AIBN), whereas monomers 25c and 25d were not polymerizable or copolymerizable by AIBN due to a strong inhibitive effect exerted by the nitrophthalimide group. Monomers 25c and 25d were cationically polymerized (BF₃·OEt₂). Monomer 25b and styrene were copolymerized and their reactivity ratios were r₁ = 1.7 and r₂ = 0.55, respectively. The prepared polymers are useful as backbone polymers for grafting living anionic polymers.     

Syntheses and reactions of functional polymers. XCIII. Syntheses of polymers containing the N-(4-hydroxy-3-nitrophenyl)succinimide structure in the chain and the use of these activated polymer esters of N-blocked amino acids or peptides

Polymers containing the N-(4-hydroxy-3-nitrophenyl)succinimide residue were designed in order to achieve acyl activation of a reacting carboxylic acid in the solid phase. These polymers were prepared through the following three routes: (a) styrene was allowed to copolymerize with N-(4-hydroxy-3-nitrophenyl)- or N-(4-acetoxy-3-nitrophenyl)maleimide, (b) styrene was copolymerized with N-(4-acetoxyphenyl)maleimide in the presence of divinylbenzene (DVB), and the copolymer obtained was hydrolyzed and nitrated, (c) a copolymer of maleic anhydride and styrene was reacted with p-aminophenol, followed by nitration. The polymers prepared by routes b and c were converted to the activated polymer esters of N-blocked amino acids and peptides by using dicyclohexylcarbodiimide (DCC). The acylated polymers thus obtained were treated with amino acid esters and found to give peptides quantitatively without racemization.     

The Rates of Diazomethane Formation from Methylnitrosoamides. The stability of diazomethane solutions towards aqueous alkalis

The rate of hydrolysis of N-methyl-N-nitrosoamides by aqueous alkalis varies greatly. Methylnitrosourea (1) is hydrolyzed rapidly by aqueous KOH-solutions at low temperatures to give a high yield of diazomethane. Under similar conditions, N,N′-dimethyl-N,N′-dinitroso-oxamide (3) is hydrolyzed more slowly, but also gives a good yield of diazomethane. N,N′-Dimethyl-N,N′-dinitrosoterephthal-amide (4) , and (N-methyl-N-nitroso)-4-amino-4-methyl-2-pentanone (5) are less easily hydrolyzed by aqueous KOH-solutions. N-Methyl-N-nitroso-p-toluenesulfonamide (2) was the least reactive out of those tested. The hydrolysis of diazomethane in toluene with aqueous bases follows first order kinetics. The hydrolysis rate is greatly influenced by the concentration and strength of the base and temperature.     

Synthesis of Dye-Labeled Lysine Derivatives

The N′-dabcyl-N ^α-(9-fluorenylmethoxy)-carbonyllysine was prepared by reaction of lysine-Cu²⁺ complex with the N-hydroxysuccinimide (HOSu) activated ester of [4-(4'-dimethylamino)phenylazo]benzoic acid (dabcyl acid) followed by treatment with EDTA and acylation with Fmoc-OSu, and the N ^α-tert-butyloxycarbonyl-N′-dabcyllysine was prepared by reaction of N ^α-tert-butyloxycarbonyllysine with dabcyl-OSu.     

Synthesis and activity of four (N,N‐dimethylamino)benzamide nonsteroidal anti‐inflammatory drugs based on thiazole and thiazoline

Four compounds derived from 2‐aminothiazole and 2‐amino‐2‐thiazoline were prepared by coupling the respective bases with the acid chlorides of either 3‐ or 4‐(N,N‐dimethylamino)benzoic acid. Products were identified using infrared spectroscopy, ¹H NMR spectroscopy and electrospray mass spectroscopy and in two cases by single‐crystal X‐ray diffraction. Of the four, N‐(thiazol‐2‐yl)‐3‐(N,N‐dimethylamino)‐benzamide (1), N‐(thiazolin‐2‐yl)‐4‐(N,N‐dimethylamino)benzamide (2), N‐(thiazolin‐2‐yl)‐3‐(N,N‐dimethylamino) benzamide (3) and N‐(thiazolin‐2‐yl)‐4‐(N,N‐dimethylamino)benzamide (4), the hydrochloride salts of compounds 3 and 4 showed anti‐inflammatory activity across a concentration range of 10^?2?5 × 10^?4 M while 3 (at a concentration of 10^?5 M) was found to have no adverse effect on myocardial function. The X‐ray crystal structure of 2 and the 1:1 adduct structure of 3 with 3‐(N,N‐dimethylamino)benzoic acid are reported.     

Facile Synthesis of New Areneboronates as Terminal Ethyne Monomers

Summary. N-Methyliminodiethyl 2-ethynylbenzeneboronate was obtained by lithiation of phenylacetylene, addition of trimethyl borate, hydrolysis, and azeotropic condensation with N-methyl diethanolamine. 4-(Cyano-(4-ethynylphenylamino)methyl)benzeneboronate was prepared by a facile and efficient procedure from 4-ethynylaniline and N-methyliminodiethyl 4-formylbenzeneboronate, followed by scandium-catalyzed cyanation. These terminal ethyne monomers were shown to undergo β-insertion with a Schrock metathesis catalyst to yield boronic acid-functionalized oligomers.     

On-Line Coupling of High-Performance Liquid Chromatography to Atmospheric Pressure Chemical Ionization Mass Spectrometry (HPLC/APCI-MS and MS/MS). The Pollen Analysis of Hippeastrum x hortorum (Amaryllidaceae)

A H₂O/MeOH extract of the pollen of Hippeastrum x hortorum (Amaryllidaceae) was analyzed. A mixture of different compounds (at the most 84) was found, namely the geometrically ((E,E), (E,Z), (Z,E), and (Z,Z) and structurally isomeric N,N′-dicoumaroyl (=N,N′-bis[3-(4-hydroxyphenyl)prop-2-enoyl]), N,N′-diferuloyl (=N,N′-bis[3-(4-hydroxy-3-methoxyphenyl)prop-2-enoyl]), N,N′-disinapoyl (=N,N′-bis[3-(4-hydroxy-3,5-dimethoxyphenyl)prop-2-enoyl]), N-coumaroyl-N′-feruloyl, and N-feruloyl-N′-sinapoyl derivatives of spermidine (=4-azaoctane-1,8-diamine=N-(3-aminopropyl)butane-1,4-diamine). Their structures were proven by using on-line-coupled high-performance liquid chromatography and atmospheric-pressure chemical-ionization mass spectrometry (HPLC-UV(DAD)/APCI-MS and MS/MS), UV-induced (E)⇌(Z) photoisomerization, and catalytic hydrogenation, as well by comparing their spectra and chromatographic behavior with those of synthetic standards. According to the physicochemical properties of these natural compounds, a proposed biological function is discussed.     

Synthesis of 4-substituted 1,4-benzodiazepine-3,5-diones

Synthetic routes leading to the preparation of 4-substituted 1,4-benzodiazepine-3,5-diones are described. Thus, 2-carbobenzoxyaminobenzoic acid was converted to its p-nitrobenzyl ester (I) and the decarbobenzoxylated product (II) gave, with ethyl α-bromoacetate, N-(2-carboxy p-nitrobenzylate)phenylglycine ethyl ester (III). The latter was hydrogenolyzed to N-(2-car-boxy)phenylglycine ethyl ester (IV), which was coupled with benzylamine to give N-(2-carboxy-benzylamido)phenylglycine ethyl ester (VIa). Saponification of VIa afforded N-(2-carboxy-benzylamido)phenylglycine (VIIa) which was cyclized with DCCI to produce 4-benzyl-2H-1,4-benzodiazepine-3,5(lH,4H)dione (VIIIa). Alternatively, 2-nitro-N-phenylbenzamide (Xb) was reduced to 2-amino-N-phenylbenzamide (XIb) which was converted to N-(2-carboxanih'do)-phenylglycine ethyl ester (VIb). The latter was converted to 4-phenyl-2H-1,4-benzodiazepine-3,5(1H,4H)dione (VIIIb) in an analogous fashion described for VIIIa.     

Synthesis of 3-(2-chloro-5-nitroanilino and 4-nitroanilino)-1-(2,4,6-trichlorophenyl)-2-pyrazolin-5-ones

A new synthesis of 3-anilino-1-aryl-2-pyrazolin-5-ones in which the pyrazolinone ring is built via N? N bond formation is described. 2-Cyano-2′,4′,6′-trichloroacetanilide 1 was converted to imino ether hydrochloride 2 which was reacted with anilines in methanol to produce N-arylimino ether 3a,b. Reaction of these N-arylimino ethers with hydroxylamine gave N-arylamidoximes 4a,b . An 1,2,4-oxadiazol-5-one 6a was prepared from the N-arylamidoxime 4a and subjected to base-induced rearrangement. The desired 3-anilino-pyrazolinone 7a was obtained only in a very low yield. However, O-acetylation of the N-arylamidoximes 4a,b followed by acid-catalyzed ring closure and rearrangement in the presence of excess acetic anhydride gave a mixture of N-acetylanilinopyrazolinones (e.g. 10 ) and 4-acetyloxy-3-N-acetylanilinopyrazoles (e.g. 12 ) which upon acid hydrolysis afforded the 3-anilinopyrazolinones 7a,b in better yield.     

Synthesis of 1-{4a,6-dimethyl-4a,9a-dihydropyrano-[3,4-<Emphasis Type="Italic">b</Emphasis>]indol-9(1<Emphasis Type="Italic">H</Emphasis>)-yl}ethanone

Heating of the bromination product of 4-methyl-3,6-dihydro-2H-pyran with 4-toluidine or 2-bromo-4-methylamiline in triethylamine gave 4-methyl-N-(4-methylphenyl)- and N-(2-bromo-4-methylphenyl)-4-methyl-3,6-dihydro-2H-pyran-3-amines which were converted into the corresponding amides by reaction with bromo- or chloroacetyl chloride. 1-{4a,6-Dimethyl-4a,9a-dihydropyrano[3,4-b]indol-9(1H)-yl} ethanone was synthesized in good yield by heating N-(2-bromo-4-methylphenyl)-N-(4-methyl-3,6-dihydro-2Hpyran-3-yl)acetamide in boiling toluene in the presence of palladium(II) acetate, triphenylphosphine, copper(II) acetate, triethylamine, and potassium carbonate.     

Intercalation of N, N-dimethyl-1-phenylethylamine into α-Zirconium Phosphate

The intercalation and deintercalation of N, N-dimethyl-1-phenylethylamine (N,N-amine) into -zirconium phosphate was investigated by pH titration. N,N-amine was taken up easily in one step to give a new phaseZr(HPO⁴)(HPO₄·N,N-amine) · H₂O, which was characterized by X-ray diffractometry, IR spectroscopy, and thermal analysis. Therelease of N,N-amine from the solid was found to be irreversible due to structural changes in both the intercalation and deintercalation reactions.     

Thermochemical study of the trans- and cis-isomeric forms of 4-(4-methoxystyryl)pyridine N-oxide

The trans and cis form of 4-(4-methoxystyryl)pyridine N-oxide were studied. The spectral characteristics of cis-4-(4-methoxystyryl)pyridine N-oxide were determined in acetonitrile. The melting and thermal decomposition processes of the trans and cisforms of 4-(4-methoxystyryl)pyridine N-oxide were studied by thermochemical methods. It was establish that the thermal decomposition of 4-(4-methoxystyryl)pyridine N-oxide begins with the cleavage of the bond between the pyridine and benzene rings.

     

Anionic synthesis of aromatic amide and carboxyl functionalized polymers. Chain-end functionalization of poly(styryl)lithium with N,N-diisopropyl-4-(1-phenylethenyl)benzamide

The novel syntheses of N,N-diisopropyl-4-benzoylbenzamide, N,N-diisopropyl-4-(1-hydroxy-1-phenylethyl)benzamide, and N,N-diisopropyl-4-(1-phenylethenyl)benzamide ( 1 ) are described. ω-Amidopolystyrene ( 2 ) was synthesized in quantitative yields by the reaction of poly(styryl)lithium with stoichiometric amounts of N,N-diisopropyl-4-(1-phenylethenyl)benzamide ( 1 ) in toluene/tetrahydrofuran (4 : 1 v/v) at −78°C. Deblocking of the amide protecting group by acid hydrolysis quantitatively provides the corresponding aromatic carboxyl chain-end functionalized polystyrene ( 3 ). The functionalization agent and functionalized polymers were characterized by HPLC, thin-layer chromatography, size exclusion chromatography, vapor phase osmometry, spectroscopy (¹H-NMR, ¹³C-NMR, and FTIR), potentiometry, and elemental analysis. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 1233–1241, 1998     

Poly[(4-N-ethylene-N-ethylamino)-α-cyanocinnamate]: A nonlinear optical polymer with a chromophoric mainchain. I. Synthesis and spectral characterization

Poly[(4-N-ethylene-N-ethylamino)-α-cyanocinnamate] was prepared by solution esterification of (4-N-ethyl-N-(2-hydroxyethyl) amino)-α-Cyanocinnamic acid and by melt transesterification of ethyl (4-N-ethyl-N-(2-hydroxyethyl) amino)-α-cyanocinnamate. The melt transesterification generally yielded polymer with a number-average molecular weight of about 10,200 by gel permeation chromatography (GPC) versus polystyrene standards. The polymer was found to be amorphous with a glass transition temperature of about 103°C by differential scanning calorimetry (DSC). The solution esterification generally gave a polymer with a number-average molecular weight of about 2200 by GPC versus polystyrene standards. This polymer was found to have a glass transition temperature varying between 60 and 90°C by DSC. The infrared (IR) spectrum of the polymer made from both methods were analyzed in detail. The ¹H- and ¹³C-NMR spectra of the meltsynthesized ethyl cinnamate derivative polymer are consistent with the reported structure.     

Transient Chemical Oscillations in the 4‐(N,N‐Dimethylamino) Benzoic Acid–Bromate Reaction

The bromination and oxidation of 4‐(N,N‐dimethylamino) benzoic acid (DMABA) by acidic bromate was investigated in a batch reactor through following their redox potential and UV/vis absorption spectra, in which transient oscillations with a long induction time were observed. Different from most of the bromate‐aromatic compound oscillators reported earlier, the addition of metal catalysts such as manganese, cerium, and ferroin does not significantly affect the nonlinear phenomena, but the induction time could be greatly shortened by adding bromide ions as a starting reagent. The reaction between bromine and DMABA was identified through ¹H NMR spectroscopy to form 3‐bromo‐4‐(N,N‐dimethylamino) benzoic acid. The compound 3‐bromo‐DMABA was also found to occur relatively early during the bromate‐DMABA reaction and was determined to be a major component prior to the onset of oscillations. Periodic evolution of 3‐bromo‐4‐(N,N‐dimethylamino) benzoic acid has been detected with a UV/vis spectrophotometer.     

Hard–Soft Receptors, Tetrakis[(N,N-diethylaminocarbonyl)methoxy] thiacalix[4]arene Derivatives with cone and 1,3-alternate Conformation

Direct O-alkylation of p-tert-butyltetrathiacalix[4]arene with N,N-diethylchloroacetamide afforded two conformational isomers (1,3-alternate and cone) of tetrakis[(N,N-diethylaminocarbonyl)methoxy]thiacalix[4]arene and 1,3-disubstituted bis[(N,N-diethylaminocarbonyl)methoxy]thiacalix[4]arene, depending on the base used. The complaxation behaviors of the tetrakis isomers were assessed by ¹H NMR titration experiments. Evidence of 1:2 (homo- and hetero-dinuclear) complexes formation of 1,3-alternate-tetrakis[(N,N-diethylaminocarbonyl)methoxy]thiacalix[4]arene with alkali (K⁺ and Na⁺) or transition (Ag⁺) metal ions was obtained. Interestingly, it was found that the cone-tetrakis[(N,N-diethylaminocarbonyl)methoxy]thiacalix[4]arene required a prior Ag⁺ complexation to form 1:2 heterodinuclear complex. Received in final form: 26 January 2005     

Synthesis of 2-amino-4-imino-4,5-dihydrothiazoles from N-sulfonyl-α-chloroamidines and thiourea

A number of new and interesting 2-amino-4-(N-substituted)imino-4,5-dihydrothiazoles were synthesized by reacting thiourea (or thiourea hydrochloride) with N-alkyl- or N,N-dialkyl-N′-p-toluenesulfonyl-α-chloroacetamidines, where the N,N-alkyl groups were ethyl, cyclohexyl, benzyl, β-phenethyl, (3,5-dimethyl-1-adamantyl)-methyl, as well as N,N-dimethyl- and N,N-pentamethylene. Reactions of N-alkyl-N-p-toluenesulfonyl-2-chloroacetamidines (substituents being N-ethyl, N-benzyl and N,N-dimethyl) with thiourea hydrochloride in hot 2-propanol furnished 2-amino-4-(p-toluenesulfonyl)imino-4,5-dihydrothiazole (in 51, 60 and 65% yields, respectively) and the corresponding amine hydrochloride. In hot acetone or butanone, the reactions of these N-sulfonyl-2-chloroacetamidines with excess thiourea provided 2-amino-4-N-(alkyl or N,N-dialkyl)imminium-4,5-dihydrothiazole chlorides in 25–80% yield. The by-product from these reactions was p-toluenesulfonamide. The structures of the products were established by chemical transformations and spectral methods (nmr and mass spectra).     

Selective Synthesis of Polyamine Derivatives: Efficient derivatization of the secondary amino group of N-monosubstituted 1,3-diamines

N-Monosubstituted 1,3-diamines were selectively functionalized at the secondary N-atom via 2-Ph-substituted hexahydropyrimidine intermediates. Reaction of the diamines with benzaldehyde, followed by treatment with an electrophile and hydrolysis, provided the desired products with excellent selectivity and in high yields. N⁴,N⁹-bis[3-phenylprop-2-enoyl]spermine ( 4a ), which was further converted to N¹,N^{1 2}-bis[3-phenylprop-2-enoyl]spermine ( 15 ) by a transamidation reaction, was prepared by this way in 82% yield from spermine ( 1 ). Compound 4a was alternatively synthesized in 83% yield, equally from 1 , by a sequence involving intermediary protection of the terminal amino groups.     

Synthesis of aryl 3-(2-imidazolyl)propyl ketones

The approach to the title compounds was via lithiation-substitution of N-methyl or N-(triphenylmethyl)-imidazole by some iodo ketals. 4-Chloro-4′-halobutyrophenones (halo = F, Cl, Br) were converted by sodium iodide to the corresponding aliphatic iodides which were subsequently ketalized with ethylene glycol to provide the corresponding iodo ketals. Lithiation of either 1-methyl- or 1-(triphenylmethyl)imid-azole with N-butyllithium generated the corresponding 2-lithioimidazoles, in situ, which were then reacted with these iodo ketals to form the corresponding C-2 substituted imidazoles. Dilute aqueous acid hydrolysis released the ketone from the ketal. For N-triphenylmethyl protected imidazoles, the triphenylmethyl group was also hydrolyzed to give triphenylmethanol and 3-(2-imidazolyl)propyl 4-haloaryl ketones. These N-unsubstituted imidazolyl ketones can be alkylated independently with triphenylmethyl chloride to form the corresponding N-triphenylmethyl imidazole derivatives.     

Total Synthesis of (±)-3-Deoxy-7,8-dihydromorphine, (±)-4-Methoxy-N-methylmorphinan-6-one and 2,4-Dioxygenated (±)-Congeners

A total synthesis of racemic 3-deoxy-7,8-dihydromorphine ((±)- 2 ) and 4-me-thoxy-ALmethylmorphinan-6-one ((±)- 3 ) is described. The key intermediate was 2,4-dihydroxy-N-formylmorphinan-6-one (11) , obtained from 3,5-dibenzyloxy-phenylacetic acid (4) in 41.8% overall yield. Bromination of 11 , and treatment with aqueous N_aOH-solution afforded, after N-deblocking and reductive N-methylation with concomitant removal of the aromatic bounded Br-atom, the morphinanone 14. Elimination of the HO–C(2) group in 14 was accomplished by hydrogenolysis of its N-phenyltetrazolyl ether 15 , to give 3-deoxy-6,0-didehydro-7,8-dihydromorphine (16). Reduction of 16 with L-Selectride at low temperature provided (±)- 2 in high yield. The ether 15 directly afforded, under more vigorous reduction conditions, 4-hydroxy-N-methylmorphinan-6-one (17). and after O-methylation of 17 , the methyl ether (±)- 3 was obtained. A (1:l)-mixture of 4-hydroxy-2-methoxy-N-methylmor-phinan-6-one (28) and its 2-hydroxy-4-methoxy isomer 30 svere obtained by Grewe-cyclization of a mono-methoxylated aromatic precursor similar to that which afforded 11. The 2,4-dioxygenated N-methylmorphinan-6-ones 29 , 31 and 38 were also prepared and characterized.