Reactions of phthalazine, quinazoline, 4,7-phenanthroline and 2,3'-bipyridine with ruthenium carbonyl

The reactions of [Ru(3)(CO)(12)] with four aromatic diazines have been studied in THF at reflux temperature. With phthalazine (L(1)), the compound [Ru(3)(μ-κ(2)N(2)N(3)-L(1))(μ-CO)(3)(CO)(7)] (1), which contains an intact phthalazine ligand in an axial position bridging an Ru-Ru edge through both N atoms, is initially formed but it reacts with more phthalazine to give [Ru(3)(κN(2)-L(1))(μ-κ(2)N(2)N(3)-L(1))(μ-CO)(3)(CO)(6)] (2), in which a π-π stacking interaction between the aromatic rings of both ligands determines their position in cluster axial sites on the same face of the Ru(3) triangle. With quinazoline (HL(2)), the cyclometalated hydrido decacarbonyl derivative [Ru(3)(μ-H)(μ-κ(2)N(3)C(4)-L(2))(CO)(10)] (3) is initially produced but it partially decarbonylates under the reaction conditions to give [Ru(6)(μ-H)(2)(μ-κ(2)N(3)C(4)-L(2))(μ(3)-κ(3)-N(1)N(3)C(4)-L(2))(CO)(19)] (4), which results from the displacement of a CO ligand of 3 by the uncoordinated N(1) atom of another molecule of 3. With 4,7-phenanthroline (H(2)L(3)), the stepwise formation of the cyclometalated derivatives [Ru(3)(μ-H)(μ-κ(2)N(4)C(3)-HL(3))(CO)(10)] (5) and two isomers of [Ru(6)(μ-H)(2)(μ(4)-κ(4)N(4)C(3)N(7)C(8)-L(3))(CO)(20)] (6a, 6b) takes place. In compounds 6a and 6b, two Ru(3)(μ-H)(CO)(10) trinuclear units are symmetrically (C(2) in 6a or C(S) in 6b) bridged by a doubly-cyclometalated 4,7-phenanthroline ligand. With 2,3'-bipyridine (HL(4)), two products have been isolated, [Ru(3)(μ-H)(μ-κ(2)N(3')C(4')-L(4))(CO)(10)] (7) and [Ru(3)(μ-H)(μ-κ(3)N(2)N(3')C(2')-L(4))(CO)(9)] (8). While compound 7 contains an N(3')C(4')-cyclometalated 2,3'-bipyridine, in compound 8 an N(3')C(2')-cyclometalation is accompanied by the coordination of the N(2) atom of the remaining pyridine fragment. The structures of compounds 2, 3, 4, 6a and 8 have been determined by X-ray diffraction crystallography.     

Trans --> cis isomerization of trans-[(dppm)2Ru(H)(L)][BF4] (L = P(OR)3) complexes: preparation of cis-[(dppm)2Ru(eta2-H2)(L)][BF4]2

A series of new dicationic dihydrogen complexes of ruthenium of the type cis-[(dppm)(2)Ru(eta(2)-H(2))(L)][BF(4)](2) (dppm = Ph(2)PCH(2)PPh(2); L = P(OMe)(3), P(OEt)(3), PF(O(i)Pr)(2)) have been prepared by protonating the precursor hydride complexes cis-[(dppm)(2)Ru(H)(L)][BF(4)] (L = P(OMe)(3), P(OEt)(3), P(O(i)Pr)(3)) using HBF(4).Et(2)O. The cis-[(dppm)(2)Ru(H)(L)][BF(4)] complexes were obtained from the trans hydrides via an isomerization reaction that is acid-accelerated. This isomerization reaction gives mixtures of cis and trans hydride complexes, the ratios of which depend on the cone angles of the phosphite ligands: the greater the cone angle, the greater is the amount of the cis isomer. The eta(2)-H(2) ligand in the dihydrogen complexes is labile, and the loss of H(2) was found to be reversible. The protonation reactions of the starting hydrides with trans PMe(3) or PMe(2)Ph yield mixtures of the cis and the trans hydride complexes; further addition of the acid, however, give trans-[(dppm)(2)Ru(BF(4))Cl]. The roles of the bite angles of the dppm ligand as well as the steric and the electronic properties of the monodentate phosphorus ligands in this series of complexes are discussed. X-ray crystal structures of trans-[(dppm)(2)Ru(H)(P(OMe)(3))][BF(4)], cis-[(dppm)(2)Ru(H)(P(OMe)(3))][BF(4)], and cis-[(dppm)(2)Ru(H)(P(O(i)Pr)(3))][BF(4)] complexes have been determined.     

Hydride mobility in trinuclear sulfido clusters with the core [Rh3(μ-H)(μ3-S)2]: molecular models for hydrogen migration on metal sulfide hydrotreating catalysts

The treatment of [{Rh(μ-SH){P(OPh)(3)}(2)}(2)] with [{M(μ-Cl)(diolef)}(2)] (diolef=diolefin) in the presence of NEt(3) affords the hydrido-sulfido clusters [Rh(3)(μ-H)(μ(3)-S)(2)(diolef){P(OPh)(3)}(4)] (diolef=1,5-cyclooctadiene (cod) for 1, 2,5-norbornadiene (nbd) for 2, and tetrafluorobenzo[5,6]bicyclo[2.2.2]octa-2,5,7-triene (tfb) for 3) and [Rh(2)Ir(μ-H)(μ(3)-S)(2)(cod){P(OPh)(3)}(4)] (4). Cluster 1 can be also obtained by treating [{Rh(μ-SH){P(OPh)(3)}(2)}(2)] with [{Rh(μ-OMe)(cod)}(2)], although the main product of the reaction with [{Ir(μ-OMe)(cod)}(2)] was [RhIr(2)(μ-H)(μ(3)-S)(2)(cod)(2){P(OPh)(3)}(2)] (5). The molecular structures of clusters 1 and 4 have been determined by X-ray diffraction methods. The deprotonation of a hydrosulfido ligand in [{Rh(μ-SH)(CO)(PPh(3))}(2)] by [M(acac)(diolef)] (acac=acetylacetonate) results in the formation of hydrido-sulfido clusters [Rh(3)(μ-H)(μ(3)-S)(2)(CO)(2) (diolef)(PPh(3))(2)] (diolef=cod for 6, nbd for 7) and [Rh(2)Ir(μ-H)(μ(3)-S)(2)(CO)(2)(cod)(PPh(3))(2)] (8). Clusters 1-3 and 5 exist in solution as two interconverting isomers with the bridging hydride ligand at different edges. Cluster 8 exists as three isomers that arise from the disposition of the PPh(3) ligands in the cluster (cis and trans) and the location of the hydride ligand. The dynamic behaviour of clusters with bulky triphenylphosphite ligands, which involves hydrogen migration from rhodium to sulfur with a switch from hydride to proton character, is significant to understand hydrogen diffusion on the surface of metal sulfide hydrotreating catalysts.     

Cationic alkylaluminum-complexed zirconocene hydrides: NMR-spectroscopic identification, crystallographic structure determination, and interconversion with other zirconocene cations

The ansa-zirconocene complex rac-Me(2)Si(1-indenyl)(2)ZrCl(2) ((SBI)ZrCl(2)) reacts with diisobutylaluminum hydride and trityl tetrakis(perfluorophenyl)borate in hydrocarbon solutions to give the cation [(SBI)Zr(μ-H)(3)(Al(i)Bu(2))(2)](+), the identity of which is derived from NMR data and supported by a crystallographic structure determination. Analogous reactions proceed with many other zirconocene dichloride complexes. [(SBI)Zr(μ-H)(3)(Al(i)Bu(2))(2)](+) reacts reversibly with ClAl(i)Bu(2) to give the dichloro-bridged cation [(SBI)Zr(μ-Cl)(2)Al(i)Bu(2)](+). Reaction with AlMe(3) first leads to mixed-alkyl species [(SBI)Zr(μ-H)(3)(AlMe(x)(i)Bu(2-x))(2)](+) by exchange of alkyl groups between aluminum centers. At higher AlMe(3)/Zr ratios, [(SBI)Zr(μ-Me)(2)AlMe(2)](+), a constituent of methylalumoxane-activated catalyst systems, is formed in an equilibrium, in which the hydride cation [(SBI)Zr(μ-H)(3)(AlR(2))(2)](+) strongly predominates at comparable HAl(i)Bu(2) and AlMe(3) concentrations, thus implicating the presence of this hydride cation in olefin polymerization catalyst systems.     

Trinuclear rhodium hydride complexes

Three novel trinuclear rhodium hydride complexes of the type {[Rh(PP*)H](3)(μ(2)-H)(3)(μ(3)-H)}[BF(4)](2) containing diphosphines Tangphos, t-Bu-BisP* and Me-DuPHOS have been synthesised. The new compounds are very stable. Their structures have been characterized by X-ray analysis in the solid state and by NMR-spectroscopic investigations in solution.     

Electron-structure calculations and bond order analysis using density functional theory of cationic dinuclear arene ruthenium complexes

The structure and nature of the metal-metal bonding interaction in the cationic complexes [(eta6-C6Me6)2Ru2(mu2-H)3]+ (1), [(eta6-C6Me6)2Ru2(mu2-H)2(mu2-1,4-SC6H4Br)]+ (2), [(eta6-C6Me6)2Ru2(mu2-H)(mu2-1,4-SC6H4Br)2]+ (3), and [(eta6-C6Me6)2Ru2(mu2-1,4-SC6H4Br)3]+ (4) have been studied at the density functional theory (DFT) level using molecular orbital (MO) theory, bond order (BO) analysis, bond decomposition energy (BDE), electron localization function (ELF), and Laplacian of the density methods. The results show that there is no direct bond between the two ruthenium atoms in 1-4, the MO interaction within the diruthenium backbone being stabilized by the bridging ligands. For complex 1, the ELF clearly shows that the bond within the diruthenium backbone is through the three bridging hydride ligands, which act as a sort of glue by forming three-center two-electron bonds characterized by (Ru, H, Ru) basins with 1.8 e mostly located in the H atomic basin.     

Ruthenium dihydride complexes: NMR studies of intramolecular isomerization and fluxionality including the detection of minor isomers by parahydrogen-induced polarization

NMR studies reveal that complexes Ru(CO)(2)(H)(2)L(2) (L = PMe(3), PMe(2)Ph, and AsMe(2)Ph) can have three geometries, ccc, cct-L, and cct-CO, with equilibrium ratios that are highly dependent on the electronic properties of L; the cct-L form is favored, because the sigma-only hydride donor is located trans to CO rather than L. When L = PMe(3), the ccc form is only visible when p-H(2) is used to amplify its spectral features. In contrast, when L = AsMe(2)Ph, the ccc and cct-L forms are present in similar quantities and, hence, must have similar free energies; for this complex, however, the cct-CO isomer is also detectable. These complexes undergo a number of dynamic processes. For L(2) = dppe, an interchange of the hydride positions within the ccc form is shown to be accompanied by synchronized CO exchange and interchange of the two phosphorus atoms. This process is believed to involve the formation of a trigonal bipyramidal transition state containing an eta(2)-H(2) ligand; in view of the fact that k(HH)/k(DD) is 1.04 and the synchronized rotation when L(2) = dppe, this transition state must contain little H-H bonding character. Pathways leading to isomer interconversion are suggested to involve related structures containing eta(2)-H(2) ligands. The inverse kinetic isotope effect, k(HH)/k(DD) = 0.5, observed for the reductive elimination of dihydrogen from Ru(CO)(2)(H)(2)dppe suggests that substantial H-H bond formation occurs before the H(2) is actually released from the complex. Evidence for a substantial steric influence on the entropy of activation explains why Ru(CO)(2)(H)(2)dppe undergoes the most rapid hydride exchange. Our studies also indicate that the species [Ru(CO)(2)L(2)], involved in the addition of H(2) to form Ru(CO)(2)(H)(2)L(2), must have singlet electron configurations.     

Diverse roles of hydrogen in rhenium carbonyl chemistry: hydrides, dihydrogen complexes, and a formyl derivative

Rhenium carbonyl hydride chemistry dates back to the 1959 synthesis of HRe(CO)? by Hieber and Braun. The binuclear H?Re?(CO)? was subsequently synthesized as a stable compound with a central Re?(μ-H)? unit analogous to the B?(μ-H)? unit in diborane. The complete series of HRe(CO)(n) (n = 5, 4, 3) and H?Re?(CO)(n) (n = 9, 8, 7, 6) derivatives have now been investigated by density functional theory. In contrast to the corresponding manganese derivatives, all of the triplet rhenium structures are found to lie at relatively high energies compared with the corresponding singlet structures consistent with the higher ligand field splitting of rhenium relative to manganese. The lowest energy HRe(CO)? structure is the expected octahedral structure. Low-energy structures for HRe(CO)(n) (n = 4, 3) are singlet structures derived from the octahedral HRe(CO)? structure by removal of one or two carbonyl groups. For H?Re?(CO)? a structure HRe?(CO)?(μ-H), with one terminal and one bridging hydrogen atom, lies within 3 kcal/mol of the structure Re?(CO)?(η2-H?), similar to that of Re?(CO)??. For H?Re?(CO)(n) (n = 8, 7, 6) the only low-energy structures are doubly bridged singlet Re?(μ-H)?(CO)(n) structures. Higher energy dihydrogen complex structures are also found.     

Diphenylphosphine and diphenylphosphido derivatives of [Ru3(μ-H)(μ3-ampy)(CO)9] (Hampy = 2-amino-6-methylpyridine)

The reactions of [Ru₃(μ-H)(μ-ampy)(CO)₉] (1) (Hampy = 2-amino-6-methylpyridine) with one or two equivalents of PPh₂H lead to the complexes [Ru₃(μ-H)(μ₃-ampy)(CO)₈(PPh₂H)] (2) or [Ru₃(μ-H)(μ₃-ampy)(CO)₇(PPh₂H)₂] (3), in which the PPh₂H ligands are cis to the bridging NH fragment and cis to the hydride. Complex 2 can be transformed in refluxing THF into the phosphido-bridged derivative [Ru₃(μ₃-ampy)(μ-PPh₂)(μ-CO)₂(CO)₆] (4), which contains the PPh₂ ligand spanning one of the two RuRu edges unbridged by the amido moiety, and presents an extremely high ³¹P chemical shift of 386.9 ppm. Under similar conditions, complex 3 gives a mixture of two isomers of [Ru₃(μ-H)(μ₃-ampy)(μ-PPh₂)₂(CO)₆] in a 5:1 ratio; the major product (5) has a plane of symmetry, whereas the minor one (6) is asymmetric.     

Germanium-rich pentaruthenium carbonyl clusters including Ru(5)(CO)(11)(mu-GePh(2))(4)(mu(5)-C) and its reactions with hydrogen

The reaction of Ru(5)(CO)(15)(mu(5)-C), 1, with Ph(3)GeH at 150 degrees C has yielded two new germanium-rich pentaruthenium cluster complexes: Ru(5)(CO)(11)(mu-CO)(mu-GePh(2))(3)(mu(5)-C), 2; Ru(5)(CO)(11)(mu;-GePh(2))(4)(mu(5)-C), 3. Both compounds contain square pyramidal Ru(5) clusters with GePh(2) groups bridging three and four of the edges of the Ru(5) square base, respectively. When treated with 1 equiv of Ph(3)GeH at 150 degrees C compound 2 is converted to 3. Reaction of 3 with H(2) at 150 degrees C yielded Ru(5)(CO)(10)(mu-GePh(2))(4)(mu(5)-C)(mu-H)(2), 4, containing two hydride ligands and one less CO ligand. Reaction of 4 with hydrogen at 150 degrees C yielded the compound Ru(5)(CO)(10)(mu-GePh(2))(2)(mu(3)-GePh)(2)(mu(3)-H)(mu(4)-CH), 5, by loss of benzene and conversion of two of the bridging GePh(2) groups into triply bridging GePh groups. Compound 5 contains one triply bridging hydride ligand and a quadruply bridging methylidyne ligand formed by addition of one hydrogen atom to the carbido carbon atom.     

Density functional theory study of the mechanism of the BF(3)-catalyzed rearrangement of 2,3,3-trimethyl-1,2-epoxybutane to 2,3,3-trimethylbutanal

The potential energy surface for the rearrangement of BF(3)-coordinated 2,3,3-trimethyl-1,2-epoxybutane to 2,3, 3-trimethylbutanal has been investigated at the B3LYP/6-31G level of theory. SCRF(SCI-PCM) solvent calculations and theoretical primary and secondary kinetic isotope effects at the same level of theory provide support for a two-step process with ring opening of the BF(3)-coordinated epoxide to a tertiary carbocation intermediate followed by hydride/deuteride migration to give aldehyde. The experimentally measured primary isotope effect (k(H)(D)/k(D)(H)) requires a correction for an appropriate secondary isotope effect to give a true isotope effect k(H)(H)/k(D)(H). For the lowest energy pathway for hydride migration, the calculated secondary kinetic isotope effect is 0.92, which when applied to the experimentally measured isotope effect of k(H)(D)/k(D)(H) = 1.73 gives a revised "true" primary kinetic isotope effect of k(H)(H)/k(D)(H) = 1.59. This compares with a calculated value of 2.01. From intermediate 15, migration of the C1-H(a) proton via 19 is energetically favored over C1-H(b) migration via 18 and this result is consistent with the experimental results in which hydride migration of the proton cis to the methyl is favored.     

Metal-Rich Metallaboranes: Synthesis,Structure, and Bonding of Heteronuclear Trimetallic Clusters containing (μ3-BH) Ligand

Building upon our earlier results on the chemistry of nido-1,2-[(Cp*RuH)₂B₃H₇] (Cp*=ɳ⁵-C₅Me₅) (nido- 1 ) with different transition metal carbonyls, we continued to investigate the reactivity with group 7 metal carbonyls under photolytic condition. Photolysis of nido- 1 with [Mn₂(CO)₁₀] led to the isolation of a trimetallic [(Cp*Ru)₂{Mn(CO)₃}(μ-H)(μ-CO)₃(μ₃-BH)] ( 2 ) cluster with a triply bridging borylene moiety. Cluster 2 is a rare example of a tetrahedral cluster having hydrido(hydroborylene) moiety. In an attempt to synthesize the Re analogue of 2 , a similar reaction was carried out with [Re₂(CO)₁₀] that yielded the trimetallic [(Cp*Ru)₂{Re(CO)₃}(μ-H)(μ-CO)₃(μ₃-BH)] ( 3 ) cluster having a triply bridging borylene unit. Along with 3 , a trimetallic square pyramid cluster [(Cp*Ru)₂{Re(CO)₃}(μ-H)₂(μ-CO)(μ₃,ɳ²-B₂H₅)] ( 4 ), and heterotrimetallic hydride clusters [{Cp*Ru(CO)₂}-{Re(CO)₄}₂(μ-H)] ( 5 ) and [{Cp*Ru(CO)}{Re(CO)₄}₂(μ-H)₃] ( 6 ) were isolated. Cluster 4 is a unique example of a M₂M′B₂ cluster having diboron capped Ru₂Re-triangle. The hydride clusters 5 and 6 have triangular RuRe₂ frameworks with one and three μ-Hs respectively. All the clusters have been characterized by using mass spectrometry, ¹H, ¹¹B{¹H}, ¹³C{¹H} NMR and IR spectroscopies analyses and the structures of clusters 2 – 6 have been unambiguously established by XRD analyses. Furthermore, to understand the electronic, structural, and bonding features of the synthesized metal-rich clusters, DFT calculations have been performed.     

Hexaruthenium carbonyl cluster complexes with basal edge-bridged square pyramidal metallic skeleton: efficient synthesis of 2-imidopyridine derivatives and determination of their reactive sites in carbonyl substitution reactions

The reactions of [Ru(3)(CO)(12)] with half equivalent of 2-amino-6-methylpyridine (H(2)ampy) or 2-aminopyridine (H(2)apy) in refluxing xylene give the hexanuclear products [Ru(6)(mu(3)-H)(2)(mu(5)-eta(2)-L)(mu-CO)(2)(CO)(14)] (L = ampy, 1; apy, 2). These reactions represent the first high-yield syntheses of hexanuclear complexes with a basal edge-bridged square pyramidal metallic skeleton. Five metal atoms of these complexes are bridged by the N-donor ligand in such a way that the edge-bridging metal atom is attached to the pyridine nitrogen, while the basal atoms of the square pyramid are capped by an imido fragment that arises from the activation of both N-H bonds of the NH(2) group. The reactive sites of these complexes in CO substitution reactions have been determined by studying the reactivity of 1 with triphenylphosphine. Two kinetically controlled monosubstitutions take place on the edge-bridging metal atom in positions cis to the pyridine nitrogen, leading to a mixture of two isomers of formula [Ru(6)(mu(3)-H)(2)(mu(5)-eta(2)-ampy)(mu-CO)(2)(CO)(13)(PPh(3))] (3 and 4). On heating at 80 degrees C, these monosubstituted isomers are transformed, via a dissociative pathway, into the product of thermodynamic control (5), which has the PPh(3) ligand on the apical Ru atom. The di- and trisubstituted derivatives [Ru(6)(mu(3)-H)(2)(mu(5)-eta(2)-ampy)(mu-CO)(2)(CO)(12)(PPh(3))(2)] (6) and [Ru(6)(mu(3)-H)(2)(mu(5)-eta(2)-ampy)(mu-CO)(2)(CO)(11)(PPh(3))(3)] (7) are stepwise formed from 3-5 and PPh(3). Compound 6 has the PPh(3) ligands on the edge-bridging and apical Ru atoms, and compound 7 has an additional PPh(3) ligand on an unbridged basal Ru atom. The compound [Ru(6)(mu(3)-H)(2)(mu(5)-eta(2)-ampy)(mu-CO)(2)(CO)(12)(mu-dppm)] (8), in which a basal and the apical Ru atoms are spanned by the dppm ligand, has been isolated from the reaction of 1 with bis(diphenylphosphino)methane.     

NMR studies of Ru(3)(CO)(10)(PMe(2)Ph)(2) and Ru(3)(CO)(10)(PPh(3))(2) and their H(2) addition products: detection of new isomers with complex dynamic behavior

The clusters Ru(3)(CO)(10)L(2), where L = PMe(2)Ph or PPh(3), are shown by NMR spectroscopy to exist in solution in at least three isomeric forms, one with both phosphines in the equatorial plane on the same ruthenium center and the others with phosphines in the equatorial plane on different ruthenium centers. Isomer interconversion for Ru(3)(CO)(10)(PMe(2)Ph)(2) is highly solvent dependent, with DeltaH decreasing and DeltaS becoming more negative as the polarity of the solvent increases. The stabilities of the isomers and their rates of interconversion depend on the phosphine ligand. A mechanism that accounts for isomer interchange involving Ru-Ru bond heterolysis is suggested. The products of the reaction of Ru(3)(CO)(10)L(2) with hydrogen have been monitored by NMR spectroscopy via normal and para hydrogen-enhanced methods. Two hydrogen addition products are observed with each containing one bridging and one terminal hydride ligand. EXSY spectroscopy reveals that both intra- and interisomer hydride exchange occurs on the NMR time scale. On the basis of the evidence available, mechanisms for hydride interchange involving Ru-Ru bond heterolysis and CO loss are proposed.     

Formation of ammonia in the reactions of a tungsten dinitrogen with ruthenium dihydrogen complexes under mild reaction conditions

Treatment of cis-[W(N2)2(PMe2Ph)4] (5) with an equilibrium mixture of trans-[RuCl(eta 2-H2)(dppp)2]X (3) with pKa = 4.4 and [RuCl(dppp)2]X (4) [X = PF6, BF4, or OTf; dppp = 1,3-bis(diphenylphosphino)propane] containing 10 equiv of the Ru atom based on tungsten in benzene-dichloroethane at 55 degrees C for 24 h under 1 atm of H2 gave NH3 in 45-55% total yields based on tungsten, together with the formation of trans-[RuHCl(dppp)2] (6). Free NH3 in 9-16% yields was observed in the reaction mixture, and further NH3 in 36-45% yields was released after base distillation. Detailed studies on the reaction of 5 with numerous Ru(eta 2-H2) complexes showed that the yield of NH3 produced critically depended upon the pKa value of the employed Ru(eta 2-H2) complexes. When 5 was treated with 10 equiv of trans-[RuCl(eta 2-H2)(dppe)2]X (8) with pKa = 6.0 [X = PF6, BF4, or OTf; dppe = 1,2-bis(diphenylphosphino)ethane] under 1 atm of H2, NH3 was formed in higher yields (up to 79% total yield) compared with the reaction with an equilibrium mixture of 3 and 4. If the pKa value of a Ru(eta 2-H2) complex was increased up to about 10, the yield of NH3 was remarkably decreased. In these reactions, heterolytic cleavage of H2 seems to occur at the Ru center via nucleophilic attack of the coordinated N2 on the coordinated H2 where a proton (H+) is used for the protonation of the coordinated N2 and a hydride (H-) remains at the Ru atom. Treatment of 5, trans-[W(N2)2(PMePh2)4] (14), or trans-[M(N2)2(dppe)2] [M = Mo (1), W (2)] with Ru(eta 2-H2) complexes at room temperature led to isolation of intermediate hydrazido(2-) complexes such as trans-[W(OTf)(NNH2)(PMe2Ph)4]OTf (19), trans-[W(OTf)(NNH2)(PMePh2)4]OTf (20), and trans-[WX(NNH2)(dppe)2]+ [X = OTf (15), F (16)]. The molecular structure of 19 was determined by X-ray analysis. Further ruthenium-assisted protonation of hydrazido(2-) intermediates such as 19 with H2 at 55 degrees C was considered to result in the formation of NH3, concurrent with the generation of W(VI) species. All of the electrons required for the reduction of N2 are provided by the zerovalent tungsten.     

The chemistry of hydridocarbonylferrates revisited: syntheses and structures of the new [H2Fe4(CO)12]2- and [HFe5(CO)14]3- anions, and the [Fe(DMF)4][Fe4(CO)12(μ5-η2-CO)(μ-H)]2 adduct containing an unprecedented isocarbonyl

The di-hydride di-anion [H(2)Fe(4)(CO)(12)](2-) has been quantitatively obtained by protonation of the previously reported mono-hydride tri-anion [HFe(4)(CO)(12)](3-) in DMSO and structurally characterised in its [NEt(4)](2)[H(2)Fe(4)(CO)(12)] salt. It shows some subtle but yet significant differences in the stereochemistry of the ligands in comparison to the heavier Ru(4) and Os(4) congeners. The study of the reactivity of these [H(4 -n)Fe(4)(CO)(12)](n-) (n = 2,3) species allowed the serendipitous isolation and structural characterization of the new pentanuclear [HFe(5)(CO)(14)](3-) mono-hydride tri-anion. Attempts to obtain the latter in better yields led to the discovery of intermolecular CO/H(-) mutual exchange reactions and isolation and structural characterization of the [Fe(DMF)(4)][Fe(4)(CO)(12)(μ(5)-η(2)-CO)(μ-H)](2)·0.5CH(2)Cl(2) and [M(+)][Fe(4)(CO)(12)(μ(4)-η(2)-CO)(μ-H)](-) (M = K, Cs) adducts, the former containing an unprecedented isocarbonyl group. The isolation of new tetranuclear and, above all, pentanuclear hydridocarbonylferrates indicates that it is possible to further expand the chemistry of homoleptic Fe carbonyl species.     

Transformation of mu4-phosphinidenes at an Ru5 center: isolation and structural characterization of hydroxyphosphinidene cluster acids, fluorophosphinidenes, and a novel mu5-phosphide

Acid hydrolysis of [Ru(5)(CO)(15)(mu(4)-PN(i)Pr(2))] (2) or protonation of the anionic PO cluster [Ru(5)(CO)(15)(mu(4)-PO)](-) (3) affords the hydroxyphosphinidene complex [Ru(5)(CO)(15)(mu(4)-POH)].1.[H(2)N(i)()Pr(2)][CF(3)SO(3)], which cocrystallizes with a hydrogen-bonded ammonium triflate salt. Reaction of [Ru(5)(CO)(15)(mu(4)-PN(i)Pr(2))] (2) with bis(diphenylphosphino)methane (dppm) leads to [Ru(5)(CO)(13)(mu-dppm)(mu(4)-PN(i)Pr(2))] (4). Acid hydrolysis of 4 leads to the dppm-substituted hydroxyphosphinidene [Ru(5)(CO)(13)(mu-dppm)(mu(4)-POH)] (5), which is analogous to 1, but unlike 1, can be readily isolated as the free hydroxyphosphinidene acid. Compound 5 can also be formed by reaction of 3 with dppm and acid. The cationic hydride cluster [Ru(5)(CO)(13)(mu-dppm)(mu(3)-H)(mu(4)-POH)][CF(3)SO(3)] (6) can be isolated from the same reaction if chromatography is not used. Compound 4 also reacts with HBF(4) to form the fluorophosphinidene cluster [Ru(5)(CO)(13)(mu-dppm)(mu(4)-PF)] (7), while reaction with HCl leads to the mu-chloro, mu(5)-phosphide cluster [Ru(5)(CO)(13)(mu-dppm)(mu-Cl)(mu(5)-P)] (8).     

Cluster expansion reactions of group 6 and 8 metallaboranes using transition metal carbonyl compounds of groups 7-9

The reinvestigation of an early synthesis of heterometallic cubane-type clusters has led to the isolation of a number of new clusters which have been characterized by spectroscopic and crystallographic techniques. The thermolysis of [(Cp*Mo)(2)B(4)H(4)E(2)] (1: E = S; 2: E = Se; Cp* = η(5)-C(5)Me(5)) in presence of [Fe(2)(CO)(9)] yielded cubane-type clusters [(Cp*Mo)(2)(μ(3)-E)(2)B(2)H(μ-H){Fe(CO)(2)}(2)Fe(CO)(3)], 4 and 5 (4: E = S; 5: E = Se) together with fused clusters [(Cp*Mo)(2)B(4)H(4)E(2)Fe(CO)(2)Fe(CO)(3)] (8: E = S; 9: E = Se). In a similar fashion, reaction of [(Cp*RuCO)(2)B(2)H(6)], 3, with [Fe(2)(CO)(9)] yielded [(Cp*Ru)(2)(μ(3)-CO)(2)B(2)H(μ-H){Fe(CO)(2)}(2)Fe(CO)(3)], 6, and an incomplete cubane cluster [(μ(3)-BH)(3)(Cp*Ru)(2){Fe(CO)(3)}(2)], 7. Clusters 4-6 can be described as heterometallic cubane clusters containing a Fe(CO)(3) moiety exo-bonded to the cubane, while 7 has an incomplete cubane [Ru(2)Fe(2)B(3)] core. The geometry of both compounds 8 and 9 consist of a bicapped octahedron [Mo(2)Fe(2)B(3)E] and a trigonal bipyramidal [Mo(2)B(2)E] core, fused through a common three vertex [Mo(2)B] triangular face. In addition, thermolysis of 3 with [Mn(2)(CO)(10)] permits the isolation of arachno-[(Cp*RuCO)(2)B(3)H(7)], 10. Cluster 10 constitutes a diruthenaborane analogue of 8-sep pentaborane(11) and has a structural isomeric relationship to 1,2-[{Cp*Ru}(2)(CO)(2)B(3)H(7)].     

Low-temperature IR and NMR studies of the interaction of group 8 metal dihydrides with alcohols

The reactions of the octahedral dihydrido complexes [MH(2)(PP(3))] [M=Fe, Ru, Os; PP(3)=P(CH(2)CH(2)PPh(2))(3)] with a variety of weak ROH acids have been studied by IR and NMR methods in either CH(2)Cl(2) or THF in the temperature range from 190 to 290 K. This study has allowed the determination of the spectral and thermodynamic properties associated with the formation of dihydrogen bonds (DHB) between the terminal hydrides and the OH group. Both the DHB enthalpy values and the hydride basicity factors (E(j)) have been found to increase in the order Fe < Ru < Os. The proton transfer process, leading to the DHB complexes, and eventually to eta(2)-H(2) products, has been found to depend on the acidic strength of the alcohol as well as the nature of the solvent. Low temperature IR and NMR techniques have been used to trace the complete energy profile of the proton transfer process involving the osmium complex [OsH(2)(PP(3))] with trifluoroethanol.     

2H NMR calculations on polynuclear transition metal complexes: on the influence of local symmetry and other factors

It is now well-known that (2)H solid-state NMR techniques can bring a better understanding of the interaction of deuterium with metal atoms in organometallic mononuclear complexes, clusters or nanoparticles. In that context, we have recently obtained experimental quadrupolar coupling constants and asymmetry parameters characteristic of deuterium atoms involved in various bonding situations in ruthenium clusters, namely D(4)Ru(4)(CO)(12), D(2)Ru(6)(CO)(18) and other related compounds [Gutmann et al., J. Am. Chem. Soc., 2010, 132, 11759], which are model compounds for edge-bridging (μ-H) and face-capping (μ(3)-H) coordination types on ruthenium surfaces. The present work is in line with density functional theory (DFT) calculations of the electric field gradient (EFG) tensors in deuterated organometallic ruthenium complexes. The comparison of quadrupolar coupling constants shows an excellent agreement between calculated and observed values. This confirms that DFT is a method of choice for the analysis of deuterium NMR spectra. Such calculations are achieved on a large number of ruthenium clusters in order to obtain quadrupolar coupling constants characteristic of a given coordination type: terminal-D, η(2)-D(2), μ-D, μ(3)-D as well as μ(4)-D and μ(6)-D (i.e. interstitial deuterides). Given the dependence of such NMR parameters mainly on local symmetry, these results are expected to remain valid for large assemblies of ruthenium atoms, such as organometallic ruthenium nanoparticles.