XeCl激光泵浦高压氢的衍射极限SRS斯托克斯光输出

利用XeCl准分子激光在高压氢中产生受激喇曼散射获得峰值功率为0.2MW、衍射极限发射角的一阶(353nm)斯托克斯输出,井研究了泵浦激光发散角对受激喇曼散射转换效率的影响.     

Efficient Raman conversion of XeCl excimer laser radiation in Ba vapour

Stimulated electronic Raman scattering in Ba vapour is used to efficiently convert the output of a XeCl excimer laser (308 nm) to the blue region (475 nm). Photon conversion efficiencies of up to 20% and output energies in the blue greater than 5 mJ are obtained. The multi-line structure of the XeCl laser emission is reproduced in the generated Stokes spectrum.     

Shock waves generated by confined XeCl excimer laser ablation of polyimide

We investigate shock waves generated by excimer laser ablation of sheet polyimide confined in water. The velocities of the ablation-induced pressure waves in the water are determined by an optical probe system. We measure supersonic velocities up to a few hundred microns away from the irradiated surface, indicating the formation of shock waves. We use these velocities to calculate the corresponding pressures. They are already in the kbar range at fluences comparable to the threshold of ablation. The shock pressure varies as the square root of the incident laser fluence, a behavior that is explained by the rapid heating of the confined gaseous products of ablation.The initially planar shock waves propagate, become spherical, and decay within a few hundred microns in the surrounding water to acoustic waves. During spherical expansion the shock pressure drops as the inverse of the square of the propagation distance.The shock waves generated may be relevant in explaining photoacoustic damage observed in biological tissue after excimer-ablation at corresponding irradiances. They may also be important in material processing applications of excimer laser ablation of polymers as they can lead to plastic deformation.     

Investigation of SRS conversion of XeCl laser emission in lead vapor,methane, and hydrogen

We have thus optimized the conditions for SRS conversion of XeCl-laser emission in lead vapor, methane, and hydrogen. The greatest influence on the conversion efficiency is exerted for an SRS cell with lead by the divergence of the pump radiation, the focusing geometry, and the type of buffer gas. The maximum efficiency with respect to absorbed UV energy was ∼57% when xenon gas was used as the buffer, corresponding to 85% of the photon efficiency. The converted radiation could be continuously tuned in the 457.6–459.3 nm band. Addition of a light gas such as helium or hydrogen to methane raised the efficiency of conversion into Stokes components in methane to ∼24 %.     

One-Joule XeCl laser

Development is reported of a UV-preionized electric-discharge XeCI laser with emission energy 0.8 J ( = 308 nm). The energy and temporal characteristics of the laser are investigated, and the optimum gas-mixture composition for He as the buffer gas is determined. Ways of further increasing the XeCl-laser energy are indicated on the basis of the results.Translated from Lazernye Sistemy, pp. 87–91, 1982.     

XeCl laser ablation of polyetheretherketone

Ablation of polyetheretherketone (PEEK), a high temperature thermoplastic, by XeCl laser radiation occurs at fluences in excess of 0.07±0.01 J cm^–2. The volatile products of ablation are CO and C₂H₂ with smaller quantities of CH₄, C₄H₂, C₆H₆ and other C₃ and C₄ hydrocarbons. At fluences close to the threshold ablation produces involatile material of relatively high molecular weight but at high fluences extensive disruption of the PEEK structure occurs with conversion of all of the oxygen in the polymer to carbon monoxide.     

The self-injected XeCl excimer laser

We present experimental and modelling results of the first self-injected excimer laser. The intracavity losses of a XeCl oscillator are properly modulated by a Pockels cell allowing generation, amplification and extraction of short laser pulses with selectable duration in the range of 1–12 ns, tailored temporal profile and peak power increment up to a factor of three. Longer output laser pulses, up to 100 ns, can be obtained by slicing the intracavity laser radiation without peak power increment. Laser output peak powers in excess of 2 MW have been obtained, with remarkable reproducibility characteristics.ENEA fellow     

Efficient discharge pumping XeCl laser

Pulsed oscillation from XeCl at λ = 3080 Å has been obtained by exciting a mixture of He:Xe:BCl₃ at pressures of 1 to 7 atm with a transverse discharge. The laser efficiency relative to the discharge absorbed energy exceeds 1%. The role of dissociation recombination in the processes of excitation of XeCl¹ is discussed.     

High efficiency discharge-pumped XeCl laser

Received: 19 March 1997/Revised version: 7 August 1997     

Observations of four-wave mixing processes in barium vapour

Emission at fifty discrete wavelengths is observed when Ba I is excited by two laser beams, a dye laser tuned to the λ 7911 Å intercombination line, 6s²¹S₀-6s6p ³P₁ and a ruby laser. The wavelengths range from 2312 Å to 8027 Å. Most of the emission lines can be attributed to four-wave mixing processes in barium.     

High repetition rate spiker-sustainer XeCl laser

An X-ray preionized spiker-sustainer XeCl-excimer laser operating at high repetition frequency (1000 Hz) and 220 W of average laser power is demonstrated. The pulse energy and the pulse duration (160 ns) are virtually independent of the repetition frequency. Comparison with aC-L-C circuit shows superior properties of spiker-sustainer excitation for high-frequency operation. Furthermore, a variation of the overshoot mode is proposed.     

Electric-discharge XeCl laser for spectroscopic investigations

Journal of Applied Spectroscopy -     

电子束泵浦XeCl准分子激光器及应用

为了获得高能紫外激光输出,开展了电子束泵浦XeCl准分子激光技术研究。详细介绍了四向电子束泵浦准分子激光装置的工作原理和结构特征,简述Marx发生器的放电电压、放电电流,激光气室中的沉积能量,激光脉冲能量、脉宽等参数的测量方法;研究了电子束泵浦XeCl准分子激光输出特性,得到了激光脉冲能量随激光气室内混合气体气压变化的规律,当激光器的充电电压为81 kV时,获得了能量100 J、脉宽200 ns的XeCl准分子激光输出,其本征效率约为3.2%。并且开展了XeCl准分子激光辐照涂层材料力学特性研究,采用微型红外通光冲量探头测量不同条件下激光辐照涂层材料的冲量耦合系数,在常压空气环境中的冲量耦合系数约为8.3210-5 NW-1。     

电子束泵浦XeCl准分子激光器及应用

为了获得高能紫外激光输出,开展了电子束泵浦XeCl准分子激光技术研究。详细介绍了四向电子束泵浦准分子激光装置的工作原理和结构特征,简述Marx发生器的放电电压、放电电流,激光气室中的沉积能量,激光脉冲能量、脉宽等参数的测量方法;研究了电子束泵浦XeCl准分子激光输出特性,得到了激光脉冲能量随激光气室内混合气体气压变化的规律,当激光器的充电电压为81kV时,获得了能量100J、脉宽200ns的XeCl准分子激光输出,其本征效率约为3.2%。并且开展了XeCl准分子激光辐照涂层材料力学特性研究,采用微型红外通光冲量探头测量不同条件下激光辐照涂层材料的冲量耦合系数,在常压空气环境中的冲量耦合系数约为8.32×10-5 N·W-1。     

XeCl准分子激光的超精细光谱结构

本文通过振动-旋转耦合的旋转谱线计算,解释了XeCl准分子激光的超精细光谱结构.计算结果与实验很好地符合.     

XeCl laser ablation of yttria stabilized zirconia

XeCl laser ablation of yttria stabilized zirconia (YSZ) in air and in vacuum (1.3×10^–4 Pa) is studied by means of etch depth measurements, scanning electron microscopy, and X-ray photoelectron spectroscopy of ablated surfaces. Results on ablation rate, surface morphology, and surface chemical composition are discussed in terms of the influence of ambient atmosphere on the ablation process, rapid melting and solidification of ablated surfaces, and preferential removal of oxygen atoms from the YSZ surface.     

Contrast enhancement in an electron-beam-excited wide-aperture XeCl laser

The possibility of increasing the contrast in the problem of the generation of petawatt radiation when the energy is released by a femtosecond laser pulse in the presence of a prepulse that passes through the medium of an electron-beam-excited wide-aperture amplifier prior to the main pulse is considered. It is demonstrated that such an approach does not lead to a significant increase in the contrast.     

高重复频率XeCl准分子激光器

本文报道一台高重复频率XeC准分子激光器的结构及其特性。采用接地栅金属陶瓷闸流管开关和气体横向流动系统及自动紫外火花预电离的放电结构。该激光器最高单脉冲能量为200mJ,最高重复脉冲频率为107Hz,最大平均功率18W。