一种实用成像系统像面动态散斑的空-时相关函数

本文根据傅里叶光学和统计理论,推导了一种实用的成像光学系统像面动态散斑的振幅及强度的空-时相关函数表达式,并提出利用相干场混合法提取空-时强度相关的信息.     

Theory and experiment of spatially and temporally partially coherent speckle shearing interferometry

The theory and experiment of spatially and temporally partially coherent speckle shearing interferometry is reported in this rapid communication for the first time. The general requirements for the surface roughness and coherence area of a diffuse object surface in spatially and temporally partially coherent speckle shearing interferometry are discussed. An experimental verification is presented and the results of theory and experiment are in good agreement.     

Comparison of laser Doppler and laser speckle contrast imaging using a concurrent processing system

Full field laser Doppler imaging (LDI) and single exposure laser speckle contrast imaging (LSCI) are directly compared using a novel instrument which can concurrently image blood flow using both LDI and LSCI signal processing. Incorporating a commercial CMOS camera chip and a field programmable gate array (FPGA) the flow images of LDI and the contrast maps of LSCI are simultaneously processed by utilizing the same detected optical signals. The comparison was carried out by imaging a rotating diffuser. LDI has a linear response to the velocity. In contrast, LSCI is exposure time dependent and does not provide a linear response in the presence of static speckle. It is also demonstrated that the relationship between LDI and LSCI can be related through a power law which depends on the exposure time of LSCI.     

Normalized intensity correlation function of single-mode laser system driven by colored cross-correlation noises

Considering a single-mode laser system with cross-correlated additive colored noise and multiplicative colored noise, we study the effects of correlation among noises on the normalized intensity correlation function C(s).C(s) is derived by means of the projection operator method.     

Study of the normalized intensity correlation function of a single-mode laser system with colored cross-correlated noises

A single-mode laser system with colored cross-correlated additive and multiplicative noise terms is considered. By the means of projection operator method, we study the effects of the cross-correlation time τ and the cross-correlation intensity λ between noises on the normalized intensity correlation function C(s). It is found that if λ＞ 0 (λ＜ 0), the normalized intensity correlation function C(s) increases (decreases) with increasing the cross-correlation time τ, and at large value of τ, the variation of the normalized intensity correlation function C(s) becomes small. With the increase of the net gain a0, C(s) exhibits a maximum when λ is larger. However, a minimum and a maximum appear on C(s) curves with the increase of a0 when λ becomes smaller and smaller.     

Used digital speckle correlation method to realize orientation function of optical mouse

Used digital speckle correlation method (DSCM) to realize orientation function of optical mouse is researched. The experiment is designed to obtain the dynamic speckle patterns which are shot by CCD, then the DSCM is used to process the sequential images and also the experiment is simulated. The experimental results show the DSCM can confirm orientation function of the optical mouse, and have a good agreement with the simulation results, and the resolution we obtained is higher than the resolution of mouse on the market.     

激光器光学系统光机热集成分析方法

论述了光机热集成分析方法原理及接口多项式,并将其应用于某激光器光学系统进行光机热集成分析。该分析方法首先对光学系统进行热分析、结构有限元分析计算,获取激光辐照下光学元件表面的结构变形;其次,对有限元计算的光学元件变形结果数据进行Zernike面形拟合处理;最后将变形后的光学表面导入到通用光学设计分析软件,分析激光器光学系统变形后产生的各类光学像差。结果表明：利用集成分析方法能够分析光学元件产生热变形对激光系统成像质量造成的影响,为光学系统设计提供参考。     

Simulation study of the two-time intensity correlation function of a two-mode laser system with both pump and quantum noises

This paper investigates the two-time intensity correlation function of a two-mode ring laser system subjected to both pump and quantum noises by stochastic simulation. It finds that the decay rate of the intensity correlation function of one mode gets faster with decreasing values of relevant parameters, i.e., the coupling constant ξ, the cross-correlation coefficient λ , the difference of the pump parameters Δa and the pump parameter a₁; however, its variations get complex in the other mode when relevant parameters are changed. The investigating results also show that the effects of the mode competition on intensity correlation function are obvious.     

Multiple-scattering speckle in holographic optical coherence imaging

We investigate the effect of multiple scattering on the image quality of holographic optical coherence imaging, which is a full-field coherence-domain imaging form of optical coherence tomography. The speckle holograms from turbid media and from multicellular tumor spheroids are characterized by high-contrast speckle on a multiply-scattered background caused by channel cross-talk. We quantify the multiple-scattered light that is accepted by the holographic coherence gate, and identify a cross-over from single-scattered to multiple-scattered light beyond 15 to 20 optical thicknesses. Speckle reduction relies on vibrating diffusers and on fast adaptive holograms in photorefractive quantum well devices. The high anisotropy factor for tumor tissue reduces multiply-scattered light contributions for biomedical tumor imaging.     

成像与激光发射系统的共口径设计与实验

将成像光学系统同时用作激光发射天线的共口径设计可有效减轻卫星载荷质量和应对各种突发状况。首先根据激光通信的能量计算链路,分析了激光发射天线的设计要求,明确了激光发射天线与成像光学系统的不同;然后根据特定的成像光学系统给出了3种具有普适性的共口径设计方法,并对这3种方法的性能进行了分析和比较,给出了它们的优缺点和适用范围;最后对所设计的共口径系统进行了发射光束仿真,经过对设计系统加工、装调后进行了室内的成像、通信实验,结果显示发射激光的最小束散角可达18.2 μrad,接近系统衍射极限,出射光斑质量良好,接收到的图像与成像系统所成图像肉眼观测无失配。初步证实该共口径设计可实现光学系统的成像和通信任务要求。     

集成式光读出FPA红外成像系统设计

本文对读出原理、像差要求、图谱质量进行深入研究,进而对读出技术进行深度整合与简化,实现光读出FPA红外成像系统小型化、轻量化、集成化。首先,从FPA的热-机械效应出发,介绍了光读出FPA红外成像系统的工作原理;然后,针对通常采用的光读出FPA红外成像系统体积大、重量大、结构复杂缺陷,提出了高集成度的新型光读出系统;接着,在分析讨论读出光路像差容限、特点的基础上,对以异形棱镜为核心元件的光读出系统进行了具体的光学仿真设计;最后,设计了集光、机、电、软技术的集成式光读出FPA红外成像系统。对系统样机测试结果表明:在确保成像性能的前提下,光读出FPA红外成像系统的体积减小到175 mm×83 mm×105 mm。以异形棱镜为核心元件的光读出技术,在满足成像精度和灵敏度的前提下,可减小读出系统的复杂程度,有效降低了光读出FPA红外成像系统的体积和重量,从而促进光读出FPA成像系统的工业化应用。     

Binary correlation function of a random field in a spatially inhomogeneous semiconductor

A relationship is obtained expressing the binary correlation function of an intrinsic random field in a spatially inhomogeneous semiconductor in terms of the atomic pseudopotentials and a factor determined by the binary correlation functions of the atoms.Translated from Izvestiya Vysshikh Uchebnykh Zavedenii, Fizika, No. 11, pp. 75–78, November, 1984.In conclusion, the author is grateful to V. L. Bonch-Bruevich and M. A. Krivoglaz for a number of useful discussions.     

High-resolution optical correlation imaging in a scattering medium

An optical correlation setup is used to image transparent objects through scattering media, and 10-mum longitudinal and 2.5-mum transverse resolution are achieved. Spectral-bandwidth sampling of the light source is made possible by a tunable dye laser and leads to signal enhancement as a result of sampling interferogram filtering. An optical system allows observation of sample slices without the need for a translation stage.     

Stable oscillations of a spatially chaotic wave function in a microstadium laser

Laser action on a single spatially chaotic wave function is obtained as a final stable state in a nonlinear dynamical model of a stadium shaped resonant cavity with an active medium. The stable single-mode lasing state corresponds to a particular metastable resonance of the cavity which wins a competition among multiple modes with positive net linear gain and has a distinct lasing threshold.     

激光相干场成像散斑噪声复合去噪方法

噪声是影响激光相干场高分辨成像系统像质的重要因素,激光相干场成像系统既受背景光加性噪声影响,又受激光乘性散斑噪声影响.为解决激光相干场成像系统受激光乘性散斑噪声和背景光加性噪声叠加引起的成像像质退化效应问题,从噪声抑制角度提高激光相干场系统高分辨成像像质,研究建立了激光散斑乘性噪声和背景光加性噪声对大气下行链路激光回波场信号影响干扰模型,并基于该模型提出了一种基于同态滤波和稀疏基追踪级联复合去噪算法.首先基于同态滤波理论将激光乘性散斑噪声转化为加性噪声,再由高通滤波器滤除散斑噪声,最后采用基追踪稀疏理论方法抑制背景光等加性噪声对像质的影响.研究表明,较现有单一去噪方法,该级联复合去噪方法可一次性消除激光乘性散斑噪声和背景加性噪声两种不同性质的噪声,有效改善了激光相干场成像质量.     

时空调制型干涉成像光谱仪的强光干扰效应仿真研究

干涉成像光谱技术是利用光的干涉原理获取目标光谱信息的一种成像技术。为研究其在强光下的干扰效果和机理,以大孔径静态成像光谱仪为典型对象,开展了相关仿真实验研究。以实际地物的图像和光谱信息为对象,仿真生成了原始干涉成像图案,并模拟830 nm单波长激光和超连续谱激光两种干扰源,分别研究不同辐照强度下的典型干扰效果,分析时假设光谱角大于30°时原始光谱信息丢失。基于本文的仿真模型,得到的相关结果表明,在830 nm的单波长激光干扰情况下,当干扰与目标成像峰值之比大于0.2∶1时原始光谱信息无法正确复原（光谱角大于30°）,但模拟加入830 nm滤光片后,干扰效果被有效滤除。在超连续谱激光干扰情况下,不考虑饱和阈值时光谱角数值最终稳定在21°;考虑探测器饱和阈值为目标成像强度峰值3倍时,干扰与目标成像峰值之比大于2.1∶1时,原始光谱信息便无法分辨。该研究可能为同类型光谱仪的激光辐照效应和损伤机理的后续研究,以及光谱成像系统的激光防护和性能优化提供参考。     

并行激光散斑测速技术中光学参数之间的制约关系

分析了采用透镜阵列做为处理器件的并行激光散斑测速系统中散斑照相机的孔径、两次傅氏变换的焦距、阵列间距、液晶光阀和摄像机ＣＣＤ的尺寸和分辨率等参数之间的相互制约关系；提出了参数的选取方案，并给出了参数选取实例。     

漫透射成像法激光强度时空分布测量装置

 提出用CCD漫透射成像法测量激光强度时空分布和激光功率,给出了测量原理, 简要叙述了装置总体结构,介绍了测量装置各部分,给出了散射屏的散射特性,重点分析了光路布局、镜头焦距、光圈、景深、滤光片的参数选择,介绍了数据处理软件,给出了激光强度分布测量实验结果。结果表明：漫透射成像法测量激光强度时空分布是可行的,该装置测量强度分布分辨力高达5 mm;测量功率准确、可靠,测量不确定度小于6%,使用方便,实现了在小空间内对大光斑进行功率和强度分布的同时准确测量。     

Moments of the intensity of a non-circular Gaussian laser speckle pattern in the diffraction field

Statistics of the intensity of a non-circular Gaussian speckle field that arises in imaging and propagation geometries was analyzed in the past but no general expressions for the moments of intensity were given. In this paper general expressions for the moments of the intensity of a non-circular speckle field are derived and their dependence on the path and beam parameters is discussed.