A convenient synthesis of bis(indolyl)alkanes under ultra sonic irradiation using silica-supported Preyssler nano particles

Bis(indolyl)alkanes have been synthesised in excellent yields in the presence of catalytic amount of silica-supported Preyssler nano particles as green, reusable and efficient catalyst under ultra sonic irradiation.     

DSC study of superionic phase transition in (NH4)4H2(SeO4)3 single crystals

DSC and complex impedance studies of the protonic conductor (NH₄)₄H₂(SeO₄)₃, which undergoes a superionic phase transition of first order at T_s = 378 K show that the activation energy of ionic conductivity d(lg σ)/dt and the ordering enthalpy ΔC_p of the crystal are proportional: d(lg σ)/dT = XΔC_p/RT_s + const, as found for MAg₄I₅ crystals undergoing a second-order superionic phase transition. Thus the short-range order environment of the species involved in fast-ion transport plays the main role in the superionic phase transition. This is also supported by the value of the entropy change at T_s, ΔS = 43 J/mole·K. A new metastable phase was found to be induced on heating the (NH₄)₄H₂(SeO₄)₃ crystal above T_s.     

Quasi-two-dimensional magnetism in (CnH2n+1NH3)2CuCl4 studied by electron paramagnetic resonance

The quasi-two-dimensional magnetism in the layered transition metal compound (C_nH_2n+1NH₃)₂CuCl₄ (n=10, 14) was investigated by means of electron paramagnetic resonance (EPR) and superconducting quantum interference device measurements. As a result, the high temperature magnetic phase transitions were reflected in the EPR parameters in a sensitive manner.     

The transverse laser induced thermoelectric voltages in step flow growth （1-x）Pb(Mg1/3Nb2/3)O3-xPbTiO3 thin films

This paper reports that the transverse laser induced thermoelectric voltages (LITV) are observed for the first time in the step flow growth (1-x)Pb(Mg1/3Nb2/3)O3-xPbTiO3 (PMN-PT,x = 0.20, 0.33, 0.50) thin films deposited on vicinal-cut strontium titanate single crystal substrates. Because lead magnesium niobate-lead titanate is a solid solution of lead magnesium niobate (PMN) and lead titanate (PT), there are two types of signals. One is wide with a time response of a microsecond, and the other superimposed with the wide signal is narrow with a time response of a nanosecond. The transverse LITV signals depend on the ratio of PMN to PT drastically. Under the irradiation of 28-ns pulsed KrF excimer laser with the 248-nm wavelength,the largest induced voltage is observed in the 0.50Pb(Mg1/Nb2/3)O3-0.50PbTiO3 films. Moreover, the effects of film thickness, substrates, and tilt angles of substrates are also investigated.     

The (γ,p) reaction in Au

Proton energy spectra of the ¹⁹⁷Au(e,p) reaction were measured in the region between 17 and 30 MeV at three angles: 40°, 90° and 140°. Two prominent bumps were observed in the (γ,p) spectra converted using virtual photon theory. The higher-energy bump shifts with photon energies and the lower-energy one stays at 10.5 MeV. The higher-energy bump is much larger at 40° than at 140°; on the contrary the angular dependence of the lower-energy bump is small. Neither bump can be described by a statistical calculation. A calculation of a microscopic shell model shows that the lower-energy bump is attributed to the decay of proton-particle–neutron-hole pairs in the T_> states, leaving a neutron hole around the Fermi surface. The higher-energy bump can be ascribed to the direct–semidirect mechanism. This paper gives the solution to a part of the long-standing question about the origin of photo-proton emission in heavy nuclei.     

三明治结构Tan(B3N3H6)n+1 团簇的磁性和量子输运性质

利用密度泛函理论和非平衡格林函数方法, 本文对小尺寸团簇Ta_n(B₃N₃H₆)_n+1 (n ≤ 4)的磁性和量子输运性质进行了系统的研究. 计算结果表明, 此类体系采用三明治结构作为其基态并且具有较高的稳定性. 体系的磁矩随团簇尺寸的增大而线性增大. 当把Ta_n(B₃N₃H₆)_n+1团簇耦合到Au电极上时, 形成的Au-Ta_n(B₃N₃H₆)_n+1-Au体系在有限偏压下展示出了较强的自旋过滤能力, 因而可以被看做是一类新型的低维自旋过滤器.     

The thermoelastic properties of [N(CH3)4]2ZnBr4 and [N(CH3)4]2MnBr4

The ferrodistortive phase transition in the bis-tetramethylammonium tetrabromide crystals below room temperature is studied within the framework of the Landau theory. The specific heats of [N(CH₃)₄]₂MnBr₄ and [N(CH₃)₄]₂ZnBr₄ are correctly described down to 40°C below the transition temperature. The phenomenological parameters are determined from calorimetric results, elastic constants and thermal expansion data. Using these coefficients, the monoclinic angle in the ferrodistortive phases is obtained. The anharmonic quantities, such as the isothermal compressibility, calculated from the specific heat data, are in good agreement with the values derived from the elastic measurements.     

(HMgN3)n(n=1–5)团簇结构与性质的密度泛函理论研究

利用密度泛函理论在B3LYP/6-311G^*水平上对叠氮化合物(HMgN₃)_n(n=1–5)团簇各种可能构型进行了几何优化,预测了各团簇的最稳定结构. 并对最稳定结构的成键特性、电荷分布、振动特性及稳定性进行理论研究. 结果表明:HMgN₃团簇最稳定结构为直线型;(HMgN₃)_n(n=2,5)团簇最稳定结构为叠氮基中N原子和金属原子相连构成Mg–N–Mg结构;(HMgN₃)_n(n=3,4)团簇最稳定结构为叠氮基与Mg原子相互链接形成的环状结构. 团簇最稳定结构中金属Mg原子均显示正电性,H原子均显示负电性,叠氮基中间的N原子显示正电性、两端的N原子显示负电性,且与Mg原子直接作用的N原子负电性更强. Mg–N键和Mg–H键为典型的离子键,叠氮基内N原子之间是共价键. 团簇最稳定结构的红外光谱分为三部分,其最强振动峰均位于2258–2347 cm^-1,振动模式为叠氮基中N–N键的反对称伸缩振动. 叠氮基在团簇和晶体中结构不变,始终以直线型存在. 稳定性分析显示,(HMgN₃)₃团簇相对于其他团簇更为稳定. 关键词： 3)_n(n=1–5)团簇')" href="#">(HMgN₃)_n(n=1–5)团簇 叠氮基 密度泛函理论 结构与性质     

Synthesis of benzoxanthene derivatives using Brønsted acidic ionic liquids (BAILs), 2-pyrrolidonium hydrogen sulfate and (4-sulfobutyl)tris(4-sulfophenyl)phosphonium hydrogen sulfate

Brønsted acidic ionic liquids (BAILs), 2-pyrrolidonium hydrogen sulfate and (4-sulfobutyl)tris(4-sulfophenyl)phosphonium hydrogen sulfate are found to be efficient catalysts for synthesis of 14-aryl-14H-dibenzo[a,i]xanthene-8,13-dione, 3,4-dihydro-1H-benzo[b]xanthene-1,6,11(2H,12H)-trione, and aryl-5H-dibenzo[b,i]xanthene-5,7,12,14(13H)-tetraone derivatives.     

Magnetic properties of Nd0.9Dy0.1Fe3(BO3)4

The magnetic properties of trigonal Nd_0.9Dy_0.1Fe₃(BO₃)₄ substituted compound with the competitive Nd-Fe and Dy-Fe exchange interactions have been investigated. It has been shown that in Nd_0.9Dy_0.1Fe₃(BO₃)₄ a spontaneous spin-reorientation transition from an ease-axis state to an easy-plane occurs near 8 K. Anomalies of the magnetization curves are observed in a spin-flop transition induced by the magnetic field B‖c. The calculations were performed using a molecular-field approximation and a crystal-field model for the rare-earth subsystem. Extensive experimental data on the magnetic properties of Nd_0.9Dy_0.1Fe₃(BO₃)₄ have been interpreted and good agreement between theory and experiment has been achieved using the obtained theoretical dependences.     

Photoluminescence properties of Eu in Y(PO3)3 under VUV excitation

The photoluminescence properties of Y_1−x(PO₃)₃:xEu³⁺ (0<x≤0.2) are investigated. The excitation spectrum of Y_0.85(PO₃)₃:0.15Eu₃⁺ shows that both the (PO₃)₃³⁻ groups and the CT bands of O²⁻-Y³⁺ can efficiently absorb the excitation energy in the region of 120-250 nm. Under 147 nm excitation, the optimal emissive intensity of Y_1−x(PO₃)₃:xEu³⁺ (0<x≤0.2) is about 36% of the commercial phosphor (Y,Gd)BO₃:Eu³⁺, which hints that the absorbed energy by the host matrix could be efficiently transferred to Eu³⁺. We try to study the concentration quenching mechanism of Y_1−x(PO₃)₃:xEu³⁺ (0<x≤0.2) under 147 and 172 nm excitation.     

Rotational spectra of gauche perfluoro-n-butane, C4F10; perfluoro-iso-butane, (CF3)3CF; and tris(trifluoromethyl)methane, (CF3)3CH

The microwave spectra of the gauche conformer of perfluoro-n-butane, n-C₄F₁₀, of perfluoro-iso-butane, (CF₃)₃CF, and of tris(trifluoromethyl)methane, (CF₃)₃CH, have been observed and assigned. The rotational and centrifugal distortion constants for gauche n-C₄F₁₀ are: A = 1058.11750(7) MHz, B = 617.6832(1) MHz, C = 552.18794(1) MHz, Δ_J = 0.0257(5) kHz, δ_J = 0.0052(3) kHz. A C-C-C-C dihedral angle, ω, of ∼55° has been determined. These values agree well with those obtained from a coupled cluster (CCSD/cc-PVTZ) calculation. The rotational and centrifugal distortion constants for iso-C₄F₁₀ and iso-C₄HF₉ are: B_o = 816.4519(4) MHz, D_J = 0.023(2) kHz, and B_o = 903.6985(25) MHz, D_J = 0.043(4) kHz, respectively. The dipole moment of iso-C₄F₁₀ and iso-C₄HF₉ have been measured and found to be 0.0338(8) and 1.69(9) D, respectively.     

Synthesis and luminescence properties of Eu, Ce and Tb-activated Sr3La2(BO3)4 under UV excitation

The spectroscopic properties in UV-excitable range for the phosphors of Sr₃La₂(BO₃)₄:RE³⁺ (RE³⁺=Eu³⁺, Ce³⁺, Tb³⁺) were investigated. The phosphors were synthesized by conventional solid-state reactions. The photoluminescence (PL) spectra and commission international de I'Eclairage (CIE) coordinates of Sr₃La₂(BO₃)₄:RE³⁺ were investigated. The f-d transitions of Eu³⁺, Ce³⁺ and Tb³⁺ in the host lattices are assumed and corroborated. The PL and PL excitation (PLE) spectra indicate that the main emission wavelength of Sr₃La₂(BO₃)₄:Eu³⁺ is 611 nm, and Sr₃La₂(BO₃)₄:Ce³⁺ shows dominating emission peak at 425 nm, while Sr₃La₂(BO₃)₄:Tb³⁺ displays green emission at 487, 542, 582 and 620 nm. These phosphors were prepared by simple solid-state reaction at 1000 °C. There are lower reactive temperature and more convenient than commercial phosphors. The Sr₃La₂(BO₃)₄:Tb³⁺ applied to cold cathode fluorescent lamp was found to emit green light and have a major peak wavelength at around 542 nm. These phosphors may provide a new kind of luminescent materials under ultraviolet excitation.     

Laser synthesis of thin layers of In4Se3, In4Te3 and modification of their structure and characteristics

Trends of structural modifications and phase composition occurring in In₄Se₃ thin films and In₄Se₃-In₄Te₃ epitaxial heterojunctions under laser irradiations have been investigated. Dynamics of the layer structure modification, depending on laser modes, i.e. pulse duration τ = 2-4 ms, irradiation intensity I₀ = 10-50 kW/cm², number of pulses N = 5-50, was studied by electron microscopy. An increase in laser influence promotes enlargement of the layer grains and transformation of their polycrystalline structure towards higher degree of stoichiometry. As a result of laser solid restructuring heterojunctions of In₄Se₃-In₄Te₃, being photosensitive within 1.0-2.0 μm and showing fast time of response, have been obtained. Laser modification of structure enables one to optimize electrical and optical properties of functional elements on the base of thin films and layers of In₄Se₃, In₄Te₃, widely used as infrared detectors and filters.     

Ionic liquid-assisted hydrothermal synthesis of dendrite-like NaY(MoO4)2:Tb phosphor

Micro-sized NaY(MoO₄)₂:Tb³⁺ phosphors with dendritic morphology was synthesized by a ionic liquid-assisted hydrothermal process. X-ray diffraction (XRD) indicated that the as-prepared product is pure tetragonal phase of NaY(MoO₄)₂. Field emission scanning electron microscopy (FE-SEM) images showed that the as-prepared NaY(MoO₄)₂:Tb³⁺ phosphors have dendritic morphology. The photoluminescent (PL) spectra displayed that the as-prepared NaY(MoO₄)₂:Tb³⁺ phosphors show a stronger green emission with main emission wavelength 545 nm corresponding to the ⁵D₄→⁷F₅ transition of Tb³⁺ ion, and the optimal Tb³⁺ doping concentration for obtaining maximum emission intensity was confirmed to be 10 mol%. Based on Van Uitert's and Dexter's models the electric dipole–dipole (D–D) interaction was confirmed to be responsible for the concentration quenching of ⁵D₄ fluorescence of Tb³⁺ in the NaY(MoO₄)₂:Tb³⁺ phosphors. The intrinsic radiative transition lifetime of ⁵D₄ level is found to be 0.703 ms.     

The effect of Si surface nitridation on the interfacial structure and electrical properties of (La2O3)0.5(SiO2)0.5 high-k gate dielectric films

Thermal stability, interfacial structures and electrical properties of amorphous (La₂O₃)_0.5(SiO₂)_0.5 (LSO) films deposited by using pulsed laser deposition (PLD) on Si (1 0 0) and NH₃ nitrided Si (1 0 0) substrates were comparatively investigated. The LSO films keep the amorphous state up to a high annealing temperature of 900 °C. HRTEM observations and XPS analyses showed that the surface nitridation of silicon wafer using NH₃ can result in the formation of the passivation layer, which effectively suppresses the excessive growth of the interfacial layer between LSO film and silicon wafer after high-temperature annealing process. The Pt/LSO/nitrided Si capacitors annealed at high temperature exhibit smaller CET and EOT, a less flatband voltage shift, a negligible hysteresis loop, a smaller equivalent dielectric charge density, and a much lower gate leakage current density as compared with that of the Pt/LSO/Si capacitors without Si surface nitridation.     

Combustion synthesis and luminescence properties of NaY1−xEux(WO4)2 phosphors

The red phosphors NaY_1−xEu_x(WO₄)₂ with different concentrations of Eu³⁺ were synthesized via the combustion synthesis method. As a comparison, NaEu(WO₄)₂ was prepared by the solid-state reaction method. The phase composition and optical properties of as-synthesized samples were studied by X-ray powder diffraction and photoluminescence spectra. The results show that the red light emission intensity of the combustion synthesized samples under 394 nm excitation increases with increase in Eu³⁺ concentrations and calcination temperatures. Without Y ions doping, the emission spectra intensity of the NaEu(WO₄)₂ phosphor prepared by the combustion method fired at 900 °C is higher than that prepared by the solid-state reaction at 1100 °C. NaEu(WO₄)₂ phosphor synthesized by the combustion method at 1100 °C exhibits the strongest red emission under 394 nm excitation and appropriate CIE chromaticity coordinates (x=0.64, y=0.33) close to the NTSC standard value. Thus, its excellent luminescence properties make it a promising phosphor for near UV InGaN chip-based red-emitting LED application.     

Microwave dielectric properties of (1 − x)(Mg0.95Co0.05)TiO3–x(Na0.5La0.5)TiO3 ceramic system

The microstructures and the microwave dielectric properties of the (1 − x)(Mg_0.95Co_0.05)TiO₃–x(Na_0.5La_0.5)TiO₃ ceramic system were investigated. Two-phase system was confirmed by the XRD patterns and the EDX analysis. A co-existed second phase (Mg_0.95Co_0.05)Ti₂O₅ was also detected. The microwave dielectric properties are strongly related to the density and the matrix of the specimen. A new microwave dielectric material 0.88(Mg_0.95Co_0.05)TiO₃–0.12(Na_0.5La_0.5)TiO₃, possessing an excellent combination of dielectric properties: ε_r  22.36, Q × f  110,000 GHz (at 9 GHz), τ_f  2.9 ppm/°C), is proposed as a candidate dielectric for GPS patch antennas.     

Studies of structure, thermal, and electrical properties for Cs 5 H 3 (SO 4 ) 4 crystal

Electrical conductivity, differential scanning calorimetry, and X-ray diffraction measurements were performed on a pentacesium trihydrogen tetrasulfate, Cs₅H₃(SO₄)₄, crystal. The transition entropy at a superionic phase transition and the activation energy of proton migrations in the superionic phase were determined to be 58.2 J K⁻¹ mol⁻¹ and 0.48 eV, respectively. The crystal structure of Cs₅H₃(SO₄)₄ at room temperature was refined. The electrical conduction in Cs₅H₃(SO₄)₄ was discussed with the refined structure.     

(Bi1-x Agx)2(Te1-ySey)3粉体的机械合金化制备及其放电等离子烧结体的热电输运特性

采用机械合金化制备了n型(Bi_1-xAg_x)₂(Te_1-ySe_y)₃合金粉体,对其进行XRD分析表明Bi,Te,Ag,Se单质粉末,经2h球磨后实现了合金化;SEM分析表明随着机械合金化时间延长粉体颗粒变得均匀、细小,颗粒尺寸在微米至亚微米数量级.采用放电等离子烧结制备了块体样品,研究了合金成分和球磨时间对热电性能的影响.结果表明材料的热电性能与掺杂元素有密切关系,Ag有利于提高功率因子和降低晶格热导率,球磨10h的(Bi_0.99Ag_0.01)₂(Te_0.96Se_0.04)₃合金粉末的烧结块体具有最大的功率因子和最低的晶格热导率,并在323K取得最高ZT值0.52. 关键词： 1-xAg_x)₂(Te_1-ySe_y)₃合金')" href="#">(Bi_1-xAg_x)₂(Te_1-ySe_y)₃合金 机械合金化 放电等离子烧结 热电性能