[M(CO)2(NO)], a new core in bioorganometallic chemistry: model complexes of [Re(CO)2(NO)] and [Tc(CO)2(NO)]

In this study selected bidentate (L²) and tridentate (L³) ligands were coordinated to the Re(I) or Tc(I) core [M(CO)₂(NO)]²⁺ resulting in complexes of the general formula fac-[MX(L²)(CO)₂(NO)] and fac-[M(L³)(CO)₂(NO)] (M = Re or Tc; X = Br or Cl). The complexes were obtained directly from the reaction of [M(CO)₂(NO)]²⁺ with the ligand or indirectly by first reacting the ligand with [M(CO)₃]⁺ and subsequent nitrosylation with [NO][BF₄] or [NO][HSO₄]. Most of the reactions were performed with cold rhenium on a macroscopic level before the conditions were adapted to the n.c.a. level with technetium (^99mTc). Chloride, bromide and nitrate were used as monodentate ligands, picolinic acid (PIC) as a bidentate ligand and histidine (HIS), iminodiacetic acid (IDA) and nitrilotriacetic acid (NTA) as tridentate ligands. We synthesised and describe the dinuclear complex [ReCl(μ-Cl)(CO)₂(NO)]₂ and the mononuclear complexes [NEt₄][ReCl₃(CO)₂(NO)], [NEt₄][ReBr₃(CO)₂(NO)], [ReBr(PIC)(CO)₂(NO)], [NMe₄][Re(NO₃)₃(CO)₂(NO)], [Re(HIS)(CO)₂(NO)][BF₄], [⁹⁹Tc(HIS)(CO)₂(NO)][BF₄], [^99mTc(IDA)(CO)₂ (NO)] and [^99mTc(NTA)(CO)₂(NO)]. The chemical and physical characteristics of the Re and Tc-dicarbonyl-nitrosyl complexes differ significantly from those of the corresponding tricarbonyl compounds.     

Influence of Fe3(CO)12 on the interaction of Re2(CO)10 with hydroxylated alumina surface

The interaction of Re₂(CO)₁₀ and Fe₃(CO)₁₂, and that of Re₂Fe(CO)₁₄ with alumina were studied during thermal treatment by FT-IR spectroscopy. The interaction of Re₂Fe(CO)₁₄ with alumina results in the formation of Re-tricarbonyls as in the Re₂(CO)₁₀ + Fe₃(CO)₁₂/Al₂O₃ system, even at room temperature. In the view of this fact, the possibility of the action of reactive Fe-monocarbonyls [Fe(CO)₅, Fe(CO)₄] on the Re₂(CO)₁₀ with appearance of a Re₂Fe(CO)₁₄ as a transient intermediate on the support, cannot be excluded.     

Reductive elimination reaction of rhenium complexes trans-(η-C5Me5)Re(CO)2(chloroaryl)Cl

Thermal reaction of the chloroaryl-chloride complexes trans-(η⁵-C₅Me₅)Re(CO)₂(Ar^Cl)Cl (Ar^Cl = 3-ClC₆H₄, 3-ClC₆H₃(4-Me) and 3,5-Cl₂C₆H₃) in acetonitrile did not interconvert to the cis isomer, instead the complex ReCl(CO)₂(NCMe)₃ and the corresponding 5-Ar^Cl-1,2,3,4,5-pentamethylcyclopentadiene were formed. Similar reductive elimination products were obtained when the starting rhenium complexes were reacted with trimethylphosphite in toluene.     

Reactivity of 2,3-bis(2-pyridyl)pyrazine with [Re2(CO)8(CH3CN)2]: Molecular structures of [Re2(CO)8(C14H10N4)] and [Re2(CO)8(C14H10N4)Re2(CO)8]

The reaction of the labile compound [Re₂(CO)₈(CH₃CN)₂] with 2,3-bis(2-pyridyl)pyrazine in dichloromethane solution at reflux temperature afforded the structural dirhenium isomers [Re₂(CO)₈(C₁₄H₁₀N₄)] (1 and 2), and the complex [Re₂(CO)₈(C₁₄H₁₀N₄)Re₂(CO)₈] (3). In 1, the ligand is σ,σ′-N,N′-coordinated to a Re(CO)₃ fragment through pyridine and pyrazine to form a five-membered chelate ring. A seven-membered ring is obtained for isomer 2 by N-coordination of the 2-pyridyl groups while the pyrazine ring remains uncoordinated. For 2, isomers 2a and 2b are found in a dynamic equilibrium ratio [2a]/[2b]  =  7 in solution, detected by ¹H NMR (−50 °C, CD₃COCD₃), coalescence being observed above room temperature. The ligand in 3 behaves as an 8e-donor bridge bonding two Re(CO)₃ fragments through two (σ,σ′-N,N′) interactions. When the reaction was carried out in refluxing tetrahydrofuran, complex [Re₂(CO)₆(C₁₄H₁₀N₄)₂] (4) was obtained in addition to compounds 1-3. The dinuclear rhenium derivative 4 contains two units of the organic ligand σ,σ′-N,N′-coordinated in a chelate form to each rhenium core. The X-ray crystal structures for 1 and 3 are reported.     

Preparation and characterization of rhenium (I) tricarbonyl dithiocarbamate compounds; Re(CO)3(S2CNMe2)(L)

The title compounds were prepared in good yield by treatment of Re(CO)₅Cl or [Re(CO)₃(H₂O)₃]Br with sodium dimethyldithiocarbamate hydrate (NaS₂CNMe₂·H₂O) and a neutral ligand yielding eight Re(CO)₃(S₂CNMe₂)(L) derivatives: L = NH₃1, pyridine (py) 2, imidazole (im) 3, pyrazole (pz) 4, triphenylphospine (PPh₃) 5, 1,3,5-triaza-7-phosphaadamantane (PTA) 6, t-butyl isocyanide (t-BuNC) 7, and cyclohexyl isocyanide (CyNC) 8. The resulting new complexes were characterized by ¹H and ¹³C NMR and infrared spectroscopy. Each was also structurally elucidated by X-ray crystallography. General structural features in all eight compounds were similar. The orientation of the three single-faced ligands, py, im and pz, demonstrates an interaction with the filled π orbital of the dithiocarbamate. Compounds were tested for stability under conditions that mimic physiological conditions; 1-4 quickly decomposed, 7 and 8 decomposed over 24 h while 5 and 6 were stable.     

Exploring the nitrosyl-approach: “Re(CO)2(NO)”- and “Tc(CO)2(NO)”-complexes provide new pathways for bioorganometallic chemistry

Nitrosylation reactions are rare in the context of low valent Re(I)- and Tc(I)-tricarbonyl complexes so far. We herein describe a method for the conversion of a “M(CO)₃-moiety” (M = Re, Tc) into a dicarbonyl-nitrosyl moiety “M(CO)₂NO”, the synthesis of important precursor complexes and intermediates and possible applications for this new kind of Re- and Tc-chemistry.The behavior of the complex [ReCl₃(CO)₂(NO)]⁻ in water was studied in detail and compared to that of [ReCl₃(CO)₃]²⁻. Contrary to the conversion of [ReCl₃(CO)₃]²⁻ to the mixed aquo-carbonyl complex [Re(OH₂)₃(CO)₃]⁺ in water, one chloride remains initially bound to the metal center in the dicarbonyl-nitrosyl complex, making [ReCl(OH₂)₂(CO)₂(NO)]⁺ the main species for further reactions. In this context, we isolated and characterized the complex [Re(μ₃-O)(CO)₂(NO)]₄. Examples of complexes with different bi- and tridentate ligands based on ReCl₃(CO)₂(NO)]⁻ are discussed.For the development of potential new radiopharmaceuticals we also adapted the nitrosylation technique to the n.c.a. level with ^99mTc. [^99mTc(OH₂)₃(CO)₃]⁺ served as starting material to form a ^99mTc(CO)₂(NO)-core. Labelling reactions with ligands such as iminodiacetic acid (IDA), nitrilotriacetic acid (NTA) and diethylenetriamine pentaacetic acid (DTPA) were performed, resulting in the complexes [^99mTc(IDA)(CO)₂(NO)], [^99mTc(NTA)(CO)₂(NO)] and [^99mTc(DTPA)(CO)₂(NO)]. In this way, the “nitrosyl-approach” adds a new and challenging synthetic tool to the already established organometallic chemistry of Re- and Tc-tricarbonyl complexes.     

A new mechanism of nucleophilic vinylic substitution and unexpected products in the reaction of chlorotrifluoroethylene with [Re(CO)5]Na and [CpFe(CO)2]K

The mechanism of chloride substitution in CF₂CFCl with [Re(CO)₅]⁻ and [CpFe(CO)₂]⁻ anions is investigated experimentally and theoretically. The substitution reaction begins with the nucleophile addition to CF₂CFCl producing the carbenoid anion [MCF₂CFCl]⁻ (A) (M = Re(CO)₅, CpFe(CO)₂). This is shown by trapping the intermediate A with electrophiles - proton donor (t-BuOH) to give MCF₂CFClH or with CF₂CFRe(CO)₅ to give acylmetallate III, and by the formation of the substitution products CF₂CFM from the anion A, generated by the deprotonation of MCF₂CFClH with t-BuOK. 1,2-Shift of metal carbonyl group concerted with the α-elimination of chloride anion is proposed as the transformation pathway of carbenoid A into CF₂CFM. A competing process of carbene insertion into Fe-CO bond is proposed to explain the formation of (XI). The feasibility of these two pathways is confirmed by DFT (B3LYP/SDD and 6-31G^∗) calculations of the carbenes [MCF₂CF:] and carbenoid anions [MCF₂CFCl]⁻. Transition states (TS) for 1,2-shift (+3.2 kcal/mol) and for nucleophilic addition at CO ligand (+5.4 kcal/mol) are located for [(CO)₅ReCF₂CFCl]⁻, but only one TS corresponding to carbene insertion into Fe-CO bond (+2.1 kcal/mol) is located for [(CO)₂CpFeCF₂CFCl]⁻. The formation of other newly observed products, F(CO)CHFRe(CO)₅ (V) and Cp(CO)₂FeCCFeCp(CO)₂ (VIII) is also discussed.     

Isolation of fac-[Re(CO)3(HMPA)3][BF4]. Structural characterization of a key cationic intermediate in the exchange reaction between [Re(CO)6][BF4] and acetylferrocene. Implications in radiopharmaceutical chemistry

[Re(CO)₆][BF₄] reacts with HMPA to form [Re(CO)₃(HMPA)₃][BF₄] (4), whose structure was determined by X-ray crystallography and proves to be a key intermediate in the ligand exchange reaction between three CO and Cp; and may be related to other cations such as [Re(CO)₃(H₂O)₃]⁺, [Re(CO)₃(CH₃CN)₃]⁺, [Re(CO)₃(DMSO)₃]⁺, obtained by different ways, and important in the field of organometallic radiopharmaceuticals.     

Synthesis and reactivity of [ReBr2(NCCH3)2(CO)2]: A new precursor for bioorganometallic chemistry

We have synthesised (Et₄N)[ReBr₂(NCCH₃)₂(CO)₂] 1 in two steps from [ReBr₃(CO)₃]²⁻. Complex 1 is water and air stable and the two Br⁻ ligands are easily exchanged for coordinating solvent molecules such as water. The reactivity of 1 with several ligands such as imidazole (imz) and 2-picolinic acid (2-pic) are easily possible with substitution exclusively occurring in trans-position to the carbonyl groups. The resulting complexes [Re(imz)₂(NCCH₃)₂(CO)₂]⁺ and [Re(2-pic)(NCCH₃)₂(CO)₂] have been isolated and structurally characterised. The two acetonitrile ligands are strongly bound and are not substituted under any conditions. Complex 1 represents therefore the new moiety “trans,cis-[Re(NCCH₃)₂(CO)₂]⁺” which can be considered as a further building block in organometallic chemistry.     

Coordination of bidentate aniline derivatives to the fac-[Re(CO)3] core

A series of rhenium(I) tricarbonyl complexes, containing bidentate derivatives of aniline, was synthesized and structurally characterized. With 1,2-diaminobenzene (Hpda) the ‘2+1’ complex salt fac-[Re(CO)₃(Hpda)₂]Br was isolated. The neutral complex [Re(CO)₃(Hapa)Br] was formed with 2-aminodiphenylamine (Hapa) as ligand. 2-Aminophenol (Hopa) also produced the neutral ‘2+1’ complex [Re(CO)₃(opa)₂(Hopa)], but with 2-mercaptophenol (Hspo) the bridged dimer [Re₂(CO)₇(spo)₂] was found. In the complex [Re(CO)₃(Htpn)Br] (Htpn = N′-{(2-methylthio)benzylidene}benzene-1,2-diamine) the potentially tridentate ligand Htpn is coordinated via the methylthio sulfur and imino nitrogen atoms only, with a free amino group.     

The coordinatively unsaturated cluster cations [Pt3{M(CO)3}(μ-Ph2PCH2PPh2)3] (M = Re, Mn)

The coordinatively unsaturated cluster [Pt₃(μ₃-CO)(μ-dppm)₃]²⁺ (1, dppm = Ph₂PCH₂PPh₂) reacts with Na⁺[M(CO)₅]⁻ to give the mixed metal clusters [Pt₃{M(CO)₃}(μ-dppm)₃]⁺ (M = Re, 2; Mn, 3). The new clusters are characterized by spectroscopic methods and, for M = Re, by an X-ray structure determination. The Pt₃Re core in 2 is tetrahedral with particularly short metal-metal distances.     

The use of 3,3-bis(2-imidazolyl) propionic acid (bip-OH) as a new chelating ligand for Re(CO)3 and Ru complexes: Formation of organometallic PNA oligomers with (bip)Re(CO)3 and their interaction with complementary DNA

We report the use of 3,3-bis(2-imidazolyl) propionic acid (bip-OH, 1) as a new chelating bis(imidazole) ligand. The synthesis and full characterization of complexes Re(bip-O)(CO)₃2 and [Ru(bpy)₂(bip-OH)]²⁺3 is reported. Both complexes show interesting spectroscopic properties, namely IR for compound 2 and ¹H NMR for 3, respectively. The free carboxylic acid functionality of 1 may be used for the coupling to biomolecules. We have prepared two peptide nucleic acid (PNA) decamers to which the rhenium complex 2 is coupled. All reactions were carried out by solid phase synthesis methods. The Re-PNA oligomer conjugates Re(CO)₃(bip- tgt cta gca a -NH₂) 4 and Re(CO)₃(bip- agg agc aac t-Lys-NH₂) 5 were obtained in good yield and high purity after HPLC purification and identified by their mass spectra. The interaction of 5 with complementary DNA yields a melting temperature of (53.9 ± 1) °C. This is the first DNA melting temperature reported for an organometallic metal-PNA conjugate.     

Synthesis and molecular structure of cisoid and transoid isomers of [Re2(CO)6(1,1′-bis(indenylidene)] derived from the reaction of [Re2(CO)8(MeCN)2] and diazoindene

The compound [Re₂(CO)₈(MeCN)₂] reacts with diazoindene (C₉H₆N₂) while refluxing in THF to afford three dirhenium products in which C₉H₆N₂ is cleaved with loss of N₂ and with incorporation of the residual indenylidene group into the products. Two indenylidene groups are coupled in two diastereomers of [Re₂(CO)₆(μ,η⁵:η⁵-1,1′-C₁₈H₁₂)] where C₁₈H₁₂=bis(indenylidene). X-ray structures show that these isomers are related as RR/SS and RS isomers. These have the two Re(CO)₃ groups coordinated transoid and cisoid, respectively to a trans bis(indenylidene) bridge. The third product is the μ-indenylidene complex [Re₂(CO)₈(μ,η¹:η⁵-C₉H₆)], which was also structurally characterised by X-ray diffraction.     

Synthesis, characterization, photoluminescence and electroluminescence properties of new 1,3,4-oxadiazole-containing rhenium（I） complex Re（CO）3（Bphen）（PTOP）

A new 1,3,4-oxadiazole-contanining rhenium(I) complex,with the formula [Re(CO)_3(Bphen)(PTOP)],(Bphen=bathophe- nardine,PTOP=4-(5-p-tolyl-1,3,4-oxadiazd-2-yl)pyridine),is synthesized and characterized by elemental analysis,IR,~1H NMR, UV-vis and luminescence spectroscopy.The double-layer electroluminescence devices based on the Re(I) complex have been fabricated by spin-coating technique.The turn-on voltage,maximum efficiency,and brightness for green emission obtained from the devices are 9V,2.1cd/A and 165cd/m~2,respectively.     

Attempts at stepwise reduction of the carbon-nitrogen triple bond of a nitrile at two metal centres: study of the reactivity of [(CO)(PPh3)2Re( (μ-NCHPh)Ru(PPh3) 2(PhCN)] towards tetrafluoroboric acid and dihydrogen

The reaction of [(CO)PPh₃)₂Re(μ-H)₂(μ-NCHPh)Ru(PPh₃)₂(PhCN)] (2) with HBF₄-Me₂O generates [(CO)PPh₃)₂Re(μ- H)₂(μ,η¹,η²HNCHPh)Ru(PPh₃)₂(PhCN)][BF₄] (3). Monitoring the reaction by NMR spectroscopy shows the intermediate formation of [(CO)(PPh₃)₂ HRe(μ-H)₂(μ-NCHPh)Ru(PPh₃)₂(PhCN)][BF₄] (4). Attempted reduction of the imine ligand by a nucleophile (H⁻ or CN⁻) failed, regenerating 2. Under dihydrogen at 50 atm, 3 is slowly transformed into [(CO)(PPh₃)₂HRe(μ-H)₃Ru(PPh₃)₂(PhCN)][BF₄] (5) with liberation of benzyl amine.     

Preparation and characterization of [Re(bpy)(CO) 3L][SbF6] (L = phosphine, phosphite)

A series of rhenium complexes [fac-Re(bpy)(CO)₃L][SbF₆] (bpy = 2,2′-bipyridine, L = P(ⁿBu)₃, PEt₃, PPh₃, P(OMe)Ph₂, P(OⁱPr)₃, P(OEt)₃, P(OMe)₃, P(OPh)₃) has been prepared and characterized by the IR, UV-vis, ¹H NMR, ³¹P NMR, X-ray photoelectron spectroscopy and electrochemical techniques. Variations in the electronic properties, i.e. CO stretching, metal-to-ligand charge transfer transition, and ³¹P NMR chemical shifts were interpreted on the basis of the electron-acceptor strength of L. However, the redox potential corresponding to [Re(bpy)(CO)₃L]⁺/[Re(bpy⁻)(CO)₃L]showed ‘V-character type’ changes after the increase in the electron-acceptor strength of L. Variation of the P(2p) binding energy of the phosphorus atom indicated that the electronic structure of the coordinated phosphorus atom was strongly influenced by the electronic properties of the directly attached substituents.     

Reaction of 3,3′,4,4′-tetramethyl-1,1′-diphosphaferrocene with [Re2(CO)8(CH3CN)2]: Novel coordination modes of the 1,1′-diphosphaferrocene ligand

Reaction of 3,3′,4,4′-tetramethyl-1,1′-diphosphaferrocene (1) with [Re₂(CO)₈(CH₃CN)₂] afforded two trimetallic complexes in which the heterometallocene is ligated across the Re-Re bond. The structure of the complex having 1 bridging the Re₂(CO)₈ moiety through two P atoms was determined by X-ray diffraction and compared with those of analogous complexes with organic bridging bis-phosphines. The second complex obtained in this reaction presumably contains 1 acting as a (P,Fe) bridging ligand.     

Synthesis of Dimethyl Carbonate from CO2 , Methanol, and Epoxides Using Re（CO） 5 Cl/K2 CO3 as Catalyst System

IntroductionOver the past few years, dimethyl carbonate(DMC) has been proven to be an efficientmethylating,methoxylating, and methoxycarbonylating agent inorganic syntheses, in which DMC is used to replace thetoxic methyl halides, dimethyl sulfate or carb     

Reactivity of [Re2(CO)8(MeCN)2] with thiazoles: Hydrido bridged dirhenium compounds bearing thiazoles in different coordination modes

Reactions of the labile compound [Re₂(CO)₈(MeCN)₂] with thiazole and 4-methylthiazole in refluxing benzene afforded the new compounds [Re₂(CO)₇{μ-2,3-η²-C₃H(R)NS}{η¹-NC₃H₂(4-R)S}(μ-H)] (1, R = H; 2, R = CH₃), [Re₂(CO)₆{μ-2,3-η²-C₃H(R)NS}{η¹-NC₃H₂(4-R)S}₂(μ-H)] (3, R = H; 4, R = CH₃) and fac-[Re(CO)₃(Cl){η¹-NC₃H₂(4-R)S}₂] (5, R = H; 6, R = CH₃). Compounds 1 and 2 contain two rhenium atoms, one bridging thiazolide ligand, coordinated through the C(2) and N atoms and a η¹-thiazole ligand coordinated through the nitrogen atom to the same Re as the thiazolide nitrogen. Compounds 3 and 4 contain a Re₂(CO)₆ group with one bridging thiazolide ligand coordinated through the C(2) and N atoms and two N-coordinated η¹-thiazole ligands, each coordinated to one Re atom. A hydride ligand, formed by oxidative-addition of C(2)-H bond of the ligand, bridges Re-Re bond opposite the thiazolide ligand in compounds 1-4. Compound 5 contains a single rhenium atom with three carbonyl ligands, two N-coordinated η¹-thiazole ligands and a terminal Cl ligand. Treatment of both 1 and 2 with 5 equiv. of thiazole and 4-methylthiazole in the presence of Me₃NO in refluxing benzene afforded 3 and 4, respectively. Further activation of the coordinated η¹-thiazole ligands in 1-4 is, however, unsuccessful and results only nonspecific decomposition. The single-crystal XRD structures of 1-5 are reported.