微波消解-微波等离子体炬原子发射光谱法测定无铅汽油中痕量铅的研究

四乙基铅作为一种良好的抗爆添加剂,曾广泛用于汽油生产中,但由于四乙基铅有很强的毒性,目前国际上已停止生产和使用车用含铅汽油,因此在生产车用无铅汽油时严格控制和准确测定铅的含量十分必要.迄今,测定汽油中铅含量的常用方法是铬酸盐容量法^[1]、一氯化碘法^[2]、X射线光谱法^[3]、分光光度法^[4,5]、原子吸收光谱法^[6]和等离子体光谱法^[7].这些方法或操作烦琐,测定时间较长^[4],或灵敏度低^[1～3],或测定误差较大,且在测试中需使用毒性较大的四乙基铅^[5],或所需的氯化甲基三辛基铵不易购买^[6],或处理过程繁琐,且仪器设备昂贵^[7].因此,建立一种简便、快速、灵敏、准确和无毒副作用的测定无铅汽油中痕量铅的方法已显得十分迫切.近年来发展的微波等离子体炬原子发射光谱法^[8]已有商品化仪器问世^[9].本文利用微波等离子体炬原子发射光谱仪研究了无铅汽油中痕量铅的测定方法,并提出用微波消解法预处理无铅汽油样品,将微波消解技术与微波等离子体炬原子发射光谱法相结合,建立了简便、快速、灵敏、准确和无污染的测定无铅汽油中痕量铅的新方法.     

化学修饰电极的研究——Ⅰ.等离子体聚合法制备聚乙烯二茂铁膜电极

化学修饰电极是当前电化学领域中十分活跃的崭新研究方向^[1~4].它的出现扩展了电化学的研究和应用范围,有广阔的发展前途,已在电子转移、光电转换、催化、立体选择性有机合成以及选择富集测定等方面显出其优越性.最近,在多种化学修饰电极类型中,令人特别感兴趣的是具有电活性的聚合物膜电极.制备聚合物膜电极的方法很多^[5~10],用等离子体聚合法可得高度交联的超薄膜,且化学和热稳定性均好^[10,11].     

一种带有芳基双亲双官能度引发剂的合成

双亲聚合物已广泛地应用于许多领域^[1],但其制备困难^[2~4].     

石墨消解-氢化物发生原子荧光光谱法测定乳粉中硒的含量

<正>硒是人体必需的一种营养元素,硒摄入量过多或过少都会影响人的身体健康^[1]。食品中硒的测定方法主要有电感耦合等离子体质谱法(ICP-MS)^[2]、高效液相色谱-电感耦合等离子体质谱法(HPLC-ICP-MS)^[3]、氢化物发生原子吸收光谱法(HG-AAS)^[4]以及氢化物发生原子荧光光谱法(HG-AFS)^[5],其中HG-AFS由于具有灵敏度高、分析快速、操作简单等特点被广泛应用于食品中硒含量的检测,     

苯甲酸及其酯类衍生物的分子印迹机理的研究

分子印迹聚合物(M IP)是一种具有分子识别能力的新型高分子材料^[1～3].对其研究的重要问题之一是如何获得对相应模板化合物具有特异性结合的聚合物,这除了受模板分子结构特征的影响外,同时在很大程度上还受各种聚合物制备条件的影响,比如功能单体^[4～6]、溶剂^[7]及辅助金属离子的影响^[8]等.我们成功地通过计算模板分子与功能单体间的相互作用,预测了一些模板分子的印迹原性(产生印迹效应的性质)的强弱^[9],同时对几十种小分子化合物的分子印迹原性与结构之间的关系进行了讨论^[10].本文以苯甲酸、对氨基苯甲酸、对羟基苯甲酸及其酯的衍生物(结构见下式)为模板,在不同的功能单体和溶剂体系中制备了相应的分子印迹聚合物,研究了模板分子中不同取代功能基的印迹作用的相对强弱,探讨了功能基的印迹作用强弱与聚合反应体系溶剂极性间的相关性.     

水介质中丙烯酸的分散聚合

丙烯酸聚合物及其与其它水性单体的共聚物是一类非常重要的水溶性高分子化合物, 具有许多优异的性能, 广泛应用于环保、 石油化工、 造纸和食品卫生等行业^[1]. 丙烯酸聚合物一般采用水溶液、 反相悬浮及反相乳液法制备, 但这些方法存在诸如反应体系粘度高, 不易散热、 使用不方便, 由于使用有机溶剂和表面活性剂易对环境造成二次污染等问题^[2].近些年, 由日本率先研制开发的以水为溶剂分散型高浓度﹑高分子量的新型水溶性高分子产品, 克服了传统合成方式和产品剂型等诸多问题, 极大地拓宽了其使用领域[^3~5]. 有关水介质中水溶性单体分散聚合的研究报道很少^[6~8].而针对于丙烯酸在水介质中的研究报道则更少[^9] , 大部分工作为专利文献.     

固相氯化法氯化聚乙烯晶粒尺寸的X射线衍射研究

晶粒尺寸的测定常用付里叶变换法^[1]和积分宽度法^[2],这两种方法都要求样品相应于某个晶面至少存在三个级别的衍射峰,而对聚合物来说,观察到高级衍射峰的情况是很少见的.方差函数法不要求样品存在三个级别的衍射峰,而且方法简单,曾广泛用于金属材料晶粒尺寸和点阵畸变的测定^[3-5],但在聚合物材料中的应用甚少^[6].本文采用方差函数法对固相氯化法氯化聚乙烯(CPE)和原料聚乙烯(PE)的晶粒尺寸和点阵畸变参数进行了研究,得到了较为满意的结果.     

静电纺丝法制备NiO纳米纤维及其表征

纳米级NiO因具有优良的催化和热敏等性能而被广泛用于催化剂^[1]、电池电极^[2,3]、光电转化材料^[4～6]、电化学电容器^[7～8]等诸多方面.迄今,已成功地制备出N iO的纳米颗粒^[9]、纳米线^[10]及纳米薄膜^[11],但是对于具有准一维结构的NiO纳米纤维的制备及性能研究尚未见报道.     

直接脱碳酸化制备有机离子插层的层状双氢氧化物

层状双氢氧化物(Layered double hydroxide, LDH)是一种具有阴离子可交换性质的层状无机材料, 由于其具有多种功能性质, 已被广泛应用于催化^[1~3]、酸吸附剂^[4]、传感器^[5]及聚合物填料^[6~8]等领域. 传统的共沉淀法制备的LDH结晶度低、尺寸小(直径通常小于100 nm). 1998年, Costantino等^[9]采用均匀沉淀法制备出了高结晶度、大尺寸(微米量级)且层间具有CO₃^2-的LDH(LDH-CO₃), 引起了人们的极大兴趣. 为解决LDH-CO₃难于交换和剥离的难题, Iyi等^[10,11]采用两步法制备了层间具有NO₃^- 或有机阴离子的LDH, 即首先采用 HCl-NaCl混合溶液将LDH-CO₃转化成为LDH-Cl, 然后再采用过量的阴离子进行交换制备LDH-NO₃或有机阴离子插层的LDH.     

硝基磺酚C光度法测定蛋白质的研究

蛋白质的定量分析是生化研究、临床化验和食品检验等领域经常涉及的内容.以有机小分子作光谱探针测定蛋白质,如甲基橙^[1,2]、考马斯亮蓝G-250^[3]、溴酚蓝^[4]、溴甲酚绿^[5]和偶氮胂Ⅲ^[6]等已得到研究.     

杯[4]芳烃涂层的TSM声波吡啶传感器的研究

吡啶是一种大气有毒污染物,可引起中枢神经系统抑郁症,刺激皮肤和呼吸系统,损害肝、肾,使胃肠功能失调等,工作场所允许最大浓度为１５ｍｇ／ｍ３［１］．目前吡啶测定方法常有ｐＨ滴定法、比色法、气相色谱法、紫外光谱法、流动注射分析法、库仑滴定法和微分阳极溶出...     

Determination of carboxylic acid vapour by a thickness-sheer-mode acoustic wave sensor coated with crown ethers

The frequency response sensitivities for 39 organic vapours by thickness-sheer-mode (TSM) acoustic wave sensors coated with monobenzo-15-crown-5 (B15C5), monobenzo-18-crown-6 (B18C6) and dibenzo-30-crown-10 (DB30C10) have been reported. It shows that crown ethers are the most efficient adsorptively active material for sensing carboxylic acid vapour, particularly B15C5 can be used for sensing formic acid vapour. The B15C5 based sensor possesses good reproducibility, high stability and short response time with wide linear detection range and a low detection limit down to 0.0201 mg l(-1) (about 5.70 ppm, V/V) of formic acid vapour while coating with 12 mug of B15C5. There is no significant interference from other organic vapours except for some nitrogen containing compounds such as diethylamine, pyridine and N,N-dimethylformamide, and carboxylic acid homologues such as acetic and propionic acids. The effect of humidity is easily controllable. Compared with acid-base titration method, the sensor can be used for the determination of HCOOH vapour with recovery rate of 98.4 approximately 103.8%, the analytical results are in good agreement with those obtained by the more time consuming acid-base titration method.     

Recognition of alkyl ketone molecules based on thickness-shear-mode acoustic sensors with calixarene derivatives

The frequency response characteristics for twenty-two organic vapours by piezoelectric thickness-shear-mode (TSM) acoustic wave sensors coated with four supramolecule compounds—calixarenes have been investigated. Among them, 2,8,14,20-tetraethyl-4,6,10,12,16,18,22,24-octahydroxylcalix[4]arene (I) was the most efficient actively adsorptive material for host-guest recognizing alkyl ketone molecules such as 2-butanone and acetone. The supramolecule recognition mechanism has been discussed, that is based on the formation of C-H?π bond interaction between the methyl group of ketone molecule and the phenyl ring of the calixarene compound. The linear range of the TSM sensor upon exposure to 2-butanone vapour was 0-940.5 ppm with a detection limit of 2.67 ppm when the coating mass of the compound I was selected as 19 μg. The kinetics behaviours in the adsorption and desorption processes have been examined with polynomial curve fitting procedure. Furthermore, the proposed TSM sensor possessed good selectivity, reversibility, reproducibility and high stability. Compared with gas chromatography (GC) method, the proposed sensor can be used for on-line determination of 2-butanone vapour in air with a recovery of 94.8-106.5%, which was in consistent with those obtained by GC method.     

Chemically modified electrode based on poly[tetra(4-aminophenyl)porphyrin] as a pH sensor

A chemically modified platinum electrode with coated poly[tetra(4-aminophenyl)porphyrin] has been used as a potentiometric pH sensor. It gives a linear response over the pH range 1.5-13.7 with a slope of 55 mV/pH (at 20 degrees ). The sensor has fair resistance to erosion of hydrofluoric acid and to interference of a coexisting redox couple. The sensor can be used for pH determination and end-point indication for potentiometric titration of hydrofluoric acid with sodium hydroxide. The a.c. impedance of the polymer membrane has also been studied.     

Development of surface chemistry for surface plasmon resonance based sensors for the detection of proteins and DNA molecules

The immobilisation of biological recognition elements onto a sensor chip surface is a crucial step for the construction of biosensors. While some of the optical biosensors utilise silicon dioxide as the sensor surface, most of the biosensor surfaces are coated with metals for transduction of the signal. Biological recognition elements such as proteins can be adsorbed spontaneously on metal or silicon dioxide substrates but this may denature the molecule and can result in either activity reduction or loss. Self assembled monolayers (SAMs) provide an effective method to protect the biological recognition elements from the sensor surface, thereby providing ligand immobilisation that enables the repeated binding and regeneration cycles to be performed without losing the immobilised ligand, as well as additionally helping to minimise non-specific adsorption. Therefore, in this study different surface chemistries were constructed on SPR sensor chips to investigate protein and DNA immobilisation on Au surfaces. A cysteamine surface and 1%, 10% and 100% mercaptoundecanoic acid (MUDA) coatings with or without dendrimer modification were utilised to construct the various sensor surfaces used in this investigation. A higher response was obtained for NeutrAvidin immobilisation on dendrimer modified surfaces compared to MUDA and cysteamine layers, however, protein or DNA capture responses on the immobilised NeutrAvidin did not show a similar higher response when dendrimer modified surfaces were used.     

Bulk acoustic wave sensor for herbicide assay based on molecularly imprinted polymer

A novel molecularly imprinted polymer (MIP) coated bulk acoustic wave (BAW) sensor was fabricated for liquid phases. It can be used as a sensitive portable implement for the assay of 2,4-dichlorophenoxyacetic acid. A logarithmic response relationship between 2.0 x 10(-7) M and 5.0 x 10(-4)M was found. The detection limit was 1.0 x 10(-7) M. Recoveries were 93.2-108.7%. Influencing factors were investigated in detail and optimized.     

A study of a new TSM bio-mimetic sensor using a molecularly imprinted polymer coating and its application for the determination of nicotine in human serum and urine

A new bio-mimetic quartz crystal thickness-shear-mode (TSM) sensor, using an imprinted polymer coating as the sensitive material, has been fabricated and applied to the determination of nicotine (NIC) in human serum and urine. The molecularly imprinted polymer (MIP) was synthesized using NIC as the template molecule and methacrylic acid (MAA) as the functional monomer. The sensor showed high selectivity and a sensitive response to NIC in aqueous system. The linear response range of the sensor was between 5.0 x 10(-8) and 1.0 x 10(-4) M with a detection limit of 2.5 x 10(-8) M. The viscoelasticity of the coating in the air and in liquid has been studied by the impedance spectrum. The MIP sensor was stable and exhibited effective reproducibility. Satisfactory results were achieved in the detection of the real samples.     

Bulk acoustic wave sensor for herbicide assay based on molecularly imprinted polymer

A novel molecularly imprinted polymer (MIP) coated bulk acoustic wave (BAW) sensor was fabricated for liquid phases. It can be used as a sensitive portable implement for the assay of 2,4-dichlorophenoxyacetic acid. A logarithmic response relationship between 2.0 × 10^–7 M and 5.0 × 10^–4 M was found. The detection limit was 1.0 × 10^–7 M. Recoveries were 93.2–108.7%. Influencing factors were investigated in detail and optimized.     

Long‐Term Stabilization of the Activity of Ascorbate Oxidase Adsorbed on a Porous Carbon Material by Polymaleimidostyrene

Abstract

The biological catalysts adsorbed on the carbon surface gradually lost their activities. In order to prolong stabilization of the enzyme activity, polymaleimidostyrene (PMS) was used to preserve enzyme conformation. Sulfhydryl and amino groups of enzyme or biological tissue can be covalently bound to PMS. By using the carbon material coated by PMS, the stability of L‐ascorbic acid sensor response using purified enzyme was significantly improved, and its initial response was not decreased at all for 150 days, although the purified enzymes adsorbed to the carbon without PMS lost their activity 22.5% after 10 days.     

Potentiometric response of graphite electrodes coated with modified polymer films

Graphite electrodes coated with chemically-modified polymer films are described. Several different polymers were used, including poly(acrylic acid), poly[triethyl(vinylbenzyl)ammonium chloride], poly[trihexyl(vinylbenzyl)ammonium chloride], and poly[trihexyl(vinylbenzyl)ammonium thiocyanate]. A cation-responsive electrode can be prepared from poly(acrylic acid)-coated graphite. Anion-responsive electrodes can be prepared from graphite coated with polymeric quaternary amines. In these electrodes, the ion-sensing species is irreversibly attached to the polymer (rather than physically entrapped within a polymer matrix); this factor eliminates leaching of the active component, and the addition of a plasticizer is unnecessary. A selective sensor for thiocyanate is described; it yields a Nernstian response over the concentration range 1 × 10^?1–1 × 10^?5 M sodium thiocyanate.