The Tamm surface state on Cu(111) and Ag(111)

It is shown, that the well-known d-electron Tamm surface-state emission observed in photoelectron spectra from Cu(111) at the M̄ point in the surface Brillouin zone, is indeed due to such a surface state and not a bulk band transition as recently suggested L. Wallden, Solid State Commun. 59, 205 (1986). A similar surface state on Ag(111) is reported.     

采用(meta)-GGA泛函对Ag(111)、Rh(111)和Ir(111)上乙烯吸附的理论研究

本文针对在多种催化反应的重要中间体乙烯,使用(meta)-GGA等级的包含PBE,BEEF-vdW,SCAN以及SCAN+rVV10在内的多种交换关联泛函,系统研究了在过渡金属表面(Ag,Rh和Ir)上乙烯吸附势能面对泛函的依赖关系. 研究发现,对于乙烯在贵金属Ag(111)上的吸附,除了PBE外,BEEF-vdW,SCAN以及SCAN+rVV10均能预测出物理吸附态的存在. 对于乙烯在Rh(111)面的吸附,SCAN和SCAN+rVV10预测在化学吸附位之前存在有物理吸附前驱态,而基于PBE和BEEF-vdW的势能面并没有发现前驱态的存在. 而对于乙烯在Ir(111)上的吸附,BEEF-vdW也能微弱地预测出化学吸附前驱态的存在. 研究结果表明,无论在哪一种金属表面上,四种泛函中SCAN+rVV10给出的吸附能最强,其次是SCAN,最后是PBE或者BEEF-vdW.     

Ultrathin Y2O3(111) films on Pt(111) substrates

The growth of ultrathin films of Y₂O₃(111) on Pt(111) has been studied using scanning tunneling microscopy (STM), X-ray photoemission spectroscopy (XPS), and low energy electron diffraction (LEED). The films were grown by physical vapor deposition of yttrium in a 10^? 6 Torr oxygen atmosphere. Continuous Y₂O₃(111) films were obtained by post-growth annealing at 700 °C. LEED and STM indicate an ordered film with a bulk-truncated Y₂O₃(111)–1 × 1 structure exposed. Furthermore, despite the lattices of the substrate and the oxide film being incommensurate, the two lattices exhibit a strict in-plane orientation relationship with the [11?0] directions of the two cubic lattices aligning parallel to each other. XPS measurements suggest hydroxyls to be easily formed at the Y₂O₃ surface at room temperature even under ultra high vacuum conditions. The hydrogen desorbs from the yttria surface above ~ 200 °C.     

Ag(111)和Au(111)上铋的初始生长行为

半金属铋(Bi)的表面合金具有的Rashba效应,和其具体结构性质有重要关联.本文结合扫描隧道显微镜(STM)和密度泛函理论(DFT),系统地研究了Bi原子在Ag(111)和Au(111)上的不同初始生长行为.在室温Ag(111)上,连续的Ag2Bi合金薄膜会优先在Ag台阶边缘形成;在570 K Ag(111)上,随着...     

Angle-resolved photoemission study of Pd(111) and Co/Pd(111)

Electronic structure of epitaxial Co films on Pd(111) has been investigated as a function of the Co overlayer thickness, by using angle-resolved photoemission spectroscopy (ARPES). It is found that experimental band structures for Pd(111) and work functions for Co/Pd(111) agree reasonably well with the results of band structure calculations. Compared to Pd(111), valence band ARPES spectra of Co/Pd(111) support the existence of the induced magnetic polarization of Pd atoms near the interface, suggesting large hybridization between Co 3d and Pd 4d states near the interface.     

Vibration spectroscopy of benzene adsorbed on Pt(111) and Ni(111)

High resolution electron energy loss spectroscopy has been applied to study the adsorption of benzene (C₆H₆ and C₆D₆) on Pt(111) and Ni(111) single crystal surfaces between 140 and 320 K. The vibrational spectra provide evidence that benzene is chemisorbed with its ring parallel to the surface, predominantly π bonded to the platinum and nickel surface respectively. A significant frequency increase of the CH-out-of-plane bending mode, largest in the case of platinum, is observed compared to the free molecule. On both metals two phases of benzene exist simultaneously, characterized by a different frequency shift. The shifts are explained by electronic interaction between the metal d-orbitals and molecules adsorbed in on top and threefold hollow sites respectively. The vibrational spectra of the multilayer condensed phase of benzene exhibit the infrared active modes of the gasphase molecule as expected.     

The anomalous RHEED patterns observed from (111)Ag-(111)Cu bilayers

RHEED patterns obtained from thin expitaxial bilayers consisting of Ag grown on smooth (111)Cu surfaces have been shown by Gradmann and Krause to contain anomalous reflections. Previously, these reflections were interpreted as due to a regular arrangement of interfacial dislocations or to multiple diffraction effects. In the present work a thin film technique was used to form smooth, easily detachable (111)Ag/Cu bilayers from which RHEED patterns containing these extra reflections were obtained. These films were grown, annealed, and examined in situ by UHV-RHEED techniques. They were then removed from the vacuum system, detached from their substrates and examined by TEM and TED. Thus, contrary to previous work, the present observations consisted of a series of experiments using RHEED, TED, and TEM carried out on the same specimen. No evidence was obtained to indicate that the anomalous reflections were due to interfacial dislocations. Rather, all the observed phenomena could be explained entirely by multiple diffraction effects.     

Nature of versatile chemisorption on TiC(111) and TiN(111) surfaces

Density-functional calculations on the polar TiX(111) (X = C, N) surfaces show (i) for clean surfaces, strong Ti3d-derived surface resonances (SR’s) at the Fermi level and X2p-derived SR’s deep in the upper valence band and (ii) for adatoms in periods 1-3, pyramidic trends in atomic adsorption energies, peaking at oxygen (9 eV). A concerted-coupling model, where adatom states couple to both kinds of SR’s in a concerted way, describes the adsorption. The chemisorption versatility and the general nature of the model indicate ramifications and predictive abilities in, e.g., growth and catalysis.     

Oscillating indirect coupling of perpendicular magnetized Co(111)-monolayers through Cu(111)

Oscillating indirect coupling has been observed between perpendicularly magnetized Co(111)-monolayers on Cu(111). through a Cu(111)-interlayer. Contrarily, a weak indication of oscillation only was observed between in-plane magnetized Co(111)-films containing 5 monolayers each. Possible mechanisms for the strongly differing coupling behaviour observed in the Cu/Co(111) system are discussed.     

Auger spectra of carbon monoxide chemisorbed on Pt(111) and Cu(111)

The Auger spectra of carbon monoxide adsorbed on Pt(111) and Cu(111) are compared. The characteristic features now regarded as a fingerprint of this adsorbed species are observed, even for the weakly adsorbed CO on copper which gives complex X-ray photoelectron spectra. No coverage dependence of the spectra was observed on either substrate. The C lsVV spectrum of CO/Cu(111) is dominated by transitions involving the “screening” electron in the 2π orbital.     

岩盐结构SrC(111)表面和(111)界面的d~0半金属性

利用第一性原理方法,本文研究了岩盐结构的SrC块材、(111)表面和(111)界面的电子结构和磁性.块材的SrC被证实是一个良好的d~0半金属铁磁体.计算结果显示(111)方向的C表面和Sr表面都保持了块材的半金属性.对于(111)方向四个可能的界面,态密度的计算显示C-Pb界面呈现半金属特性.本文对岩盐结构SrC块材、(111)表面和(111)界面半金属性的研究结果,将为高性能自旋电子器件的实际应用提供一定的理论指导.     

Silicene on hydrogen‐passivated Si(111) and Ge(111) substrates

By means of first‐principles calculations we predict the stability of silicene as buckled honeycomb lattice on passivated substrates of group‐IV(111)1 × 1 surfaces. The weak van‐der‐Waals interaction between silicene and substrates does not destroy its linear bands forming Dirac cones at the Brillouin zone corners. Only very small fundamental gaps are opened around the Fermi level.

     

Anisotropic photoemission and chemisorption-bond geometry on Ge(111) and Si(111) surfaces

In order to study the effects of photon-polarization selection rules on chemisorptionbond geometry, we have measured photoelectron spectra as a function of angle of incidence, θ_i, in the range 28° ? θ ? 80°. A noble-gas UV resonance lamp and cylindrical mirror analyzer were used to measure both bonding and non-bonding surface Orbitals. A large enhancement (200–400%) of the photocmission is found when photon electric field intensity is near the maximum normal to the surface. This indicates a spatial variation of microscopic fields which is approximately independent of adsorbate bonding since it is determined by the optical properties of the substrate. In addition, we observe some effects on adsorbate photoelectron peaks due to different orbital symmetry. The case of atomic hydrogen chemisorption is discussed as an example of this latter effect.     

Dislocations on Ag(111)

Various dislocations on Ag(111) were imaged with a scanning tunneling microscope, e.g. screw dislocations, Lomer-Cottrell locks and stacking fault tetrahedron. The distortion field near a screw dislocation was measured.