Facile synthesis of calcium silicate hydrate using sodium dodecyl sulfate as a surfactant assisted by ultrasonic irradiation

Calcium silicate hydrate (CSH) consisting of nanosheets has been successfully synthesized assisted by a tip ultrasonic irradiation (UI) method using calcium nitrate (Ca(NO₃)·4H₂O), sodium silicate (Na₂SiO₃·9H₂O) and sodium dodecyl sulfate (SDS) in water. Systematic studies found that reaction time of ultrasonic irradiation and concentrations of surfactant (SDS) in the system were important factors to control the crystallite size and morphologies. The products were characterized by X-ray power diffraction (XRD), field emission scanning electron microscopy (FESEM) and Fourier transform infrared spectrometry (FTIR). The size–strain plot (SSP) method was used to study the individual contributions of crystallite sizes and lattice strain on the peak broadening of the CSH. These characterization techniques revealed the successful formation of a crystalline phase with an average crystallite size of about 13 nm and nanosheet morphology at a reaction time of 10 min UI with 0.2 g SDS in solvent which were found to be optimum time and concentrations of SDS for the synthesis of CSH powders.     

Sodium dodecyl sulfate-assisted synthesis of CoWO4 nanorods

CoWO₄ nanorods were synthesized at 453 K for 12 h by a hydrothermal technology from Na₂WO₄ · 2H₂O and CoCl₂ · 6H₂O in the presence of sodium dodecyl sulfate (SDS). The as-synthesized CoWO₄ nanorods were characterized by various techniques of X-ray diffraction, transmission electron microscopy, scanning electron microscopy, and X-ray detector. Luminescent properties of the samples were measured at room temperature. The results showed that CoWO₄ products are nanorods with diameters of about 20 nm, and lengths ranging between 100 and 200 nm. CoWO₄ nanorods display a very strong PL peak at 453 nm with the excitation wavelength 300 nm. The possible formation mechanism of CoWO₄ nanorods was suggested.     

Sonochemical temperature controlled synthesis of pellet-, laminate- and rice grain-like morphologies of a Cu(II) porous metal–organic framework nano-structures

Nano-structures of the Cu(II) metal–organic framework, {Cu(BDT)(DMF)·CH₃OH·0.25DMF}_n (1), which BDT²⁻ is 1,4-benzeneditetrazolate, have been synthesized by the reaction of H₂BDT with Cu(NO₃)₂·6H₂O via ultrasonic irradiation in three different temperatures, which causes different morphologies. The products were characterized by IR spectroscopy, elemental analysis, scanning electron microscopy and X-ray powder diffraction. This study demonstrates that sonochemistry is a suitable method for preparation of metal–organic framework nano-structures and temperature is an effective parameter on morphologies of Cu(II) metal–organic framework nano-structures.     

草酸铕颗粒微米层状颗粒的合成及其光学性能

在室温条件下, 以柠檬酸钠为辅助剂, 通过简单沉淀法合成了草酸铕Eu₂(C₂O₄)₃·10H₂O微米层状颗粒. 应用X射线衍射、X射线电子能谱、场发射扫描电子显微镜、光致发光光谱对Eu₂(C₂O₄)₃·10H₂O结构与性能进行了表征. 讨论了草酸铕微米层状颗粒可能的形成机理.     

Thermal stability and photoluminescence property of hexagonal MoO3·0.55H2O microrods

The metastable phase of well-faceted, hexagonal, prism-like molybdenum oxide hydrate (MoO₃·0.55H₂O) was successfully synthesized by evaporating molybdic acid solution prepared through cation membrane electrolysis of Na₂MoO₄·2H₂O aqueous solution. The obtained crystals were characterized by X-ray diffraction (XRD), thermogravimetric (TG), scanning electronic microscopy (SEM) and photoluminescence (PL) spectrophotometry. The as-prepared MoO₃·0.55H₂O rods were of 2–4 μm in width and 5–12 μm in length. The MoO₃·0.55H₂O microrods displayed photoluminescence properties at room temperature and were transformed into stable orthorhombic α-MoO₃ after air annealing at 380 °C. Moreover, the influence of temperature factor on the phase transformation process, morphology and photoluminescence properties of MoO₃·0.55H₂O was investigated in detail.     

Synthesis of single crystalline (NH4)2V6O16·1.5H2O nest-like structures

Novel nest-like (NH₄)₂V₆O₁₆·1.5H₂O structures made of nanobelts have been synthesized by a facile hydrothermal approach. The powder X-ray diffraction pattern of the sample reveals the monoclinic crystalline phase of (NH₄)₂V₆O₁₆·1.5H₂O. The scanning electron microscopy images of the sample obtained at 130 °C for 3 days exhibit nest-like morphology. The transmission electron microscopy result reveals that the nanobelts have a smooth surface. The selected area electron diffraction pattern of the nanobelts indicates single crystalline nature. The two major weight losses occur in thermogravimetric analysis which correspond to the removal of water and ammonia molecules. Further, calcination of the (NH₄)₂V₆O₁₆·1.5H₂O product results in the formation of orthorhombic phase of shcherbianite V₂O₅.     

Effect of processing conditions on sonochemical synthesis of nanosized copper aluminate powders

Nanosized copper aluminate (CuAl₂O₄) spinel particles have been prepared by a precursor approach with the aid of ultrasound radiation. Mono-phasic copper aluminate with a crystallite diameter of 17 nm along the (3 1 1) plane was formed when the products were synthesized using Cu(NO₃)₂·6H₂O and Al(NO₃)₃·9H₂O as starting materials, with urea as a precipitation agent at a concentration of 9 M. The reaction was carried out under ultrasound irradiation at 80 °C for 4 h and a calcination temperature of 900 °C for 6 h. The synthesized copper aluminate particles and the effect of different processing conditions such as the copper source, precipitation agents, sonochemical reaction time, calcination temperature and time were analyzed and characterized by the techniques of powder X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), atomic force microscopy (AFM) and Fourier transformation infrared spectroscopy (FT–IR).     

Facile synthesis and characterization of high-performance NiMoO<Subscript>4</Subscript> · <Emphasis Type="Italic">x</Emphasis>H<Subscript>2</Subscript>O nanorods electrode material for supercapacitors

One-dimensional NiMoO₄ · xH₂O nanorods were synthesized by a facile template-free hydrothermal method as a potential electrode material for supercapacitors. The influences of reaction temperature, reaction time, and nickel source on the properties of resultant samples were investigated. Electrochemical data reveal that the as-synthesized one-dimensional NiMoO₄ · xH₂O nanorod superstructures can deliver a remarkable specific capacitance (SC) of 1131 F g^?1 at a current density of 1 A g^?1 and remain as high as 914 F g^?1 at 10 A g^?1 in a 6 M KOH aqueous solution. Moreover, there is only 6.2 % loss of the maximum SC after 1000 continuous charge–discharge cycles at the high current density of 10 A g^?1. Such outstanding electrochemical performance may be owing to the unique one-dimensional hierarchical structures, which can facilitate the electrolyte ions and electrons to easily contact the NiMoO₄ nanorod building blocks and then allow for sufficient faradaic reactions to take place, even at high current densities.     

A novel synthesis of size-controllable mesoporous NiMoO<Subscript>4</Subscript> nanospheres for supercapacitor applications

A novel hydrothermal emulsion method is proposed to synthesize mesoporous NiMoO₄ nanosphere electrode material. The size of sphere-shaped NiMoO₄ nanostructure is controlled by the mass ratio of water and oil phases. Nickel acetate tetrahydrate and ammonium heptamolybdate were used as nickel and molybdate precursors, respectively. The resultant mesoporous NiMoO₄ nanospheres were characterized by X-ray diffraction, N₂ adsorption and desorption, scanning electron microscopy, and transmission electron microscopy. The electrochemical performances were evaluated by cyclic voltammetry (CV), cyclic chronopotentiometry (CP), and electrochemical impedance spectroscopy (EIS) in 6 M KOH solution. The typical mesoporous NiMoO₄ nanospheres exhibit the large specific surface area of 113 m² g^?1 and high specific capacitance of 1443 F g^?1 at 1 A g^?1, an outstanding cyclic stability with a capacitance retention of 90 % after 3000 cycles of charge-discharge at a current density of 10 A g^?1, and a low resistance.     

Synthesis and sonocatalytic property of rod-shape Sr(OH)2·8H2O

A novel rod-shape sonocatalyst Sr(OH)₂·8H₂O was prepared by a facile precipitation method, and characterized by X-ray powder diffraction, transmission electron microscopy, Fourier transform infrared spectroscopy and UV–vis absorption spectroscopy. Comparative sonocatalytic degradation experiments were carried out in different conditions under ultrasonic irradiation by using rhodamine B (RhB) as the model substrate, indicating that Sr(OH)₂·8H₂O was highly sonocatalytic. Total organic carbon experiment demonstrated Sr(OH)₂·8H₂O with mass mineralization of organic carbon. The effects of catalyst amount, initial RhB concentration and ultrasonic energy of degradation were investigated, and the sonocatalyst could be reused 5 times without significant loss of activity. Furthermore, the potent degrading capability was ascribed to ultrasonic cavitation producing flash light/energy which generated radicals (e.g., OH) with high oxidation activity.     

Structure and lithium storage performances of nickel hydroxides synthesized with different nickel salts

Nickel hydroxides with hierarchical micro-nano structures are prepared by a facile homogeneous precipitation method with different nickel salts (Ni(NO₃)₂·6H₂O, NiCl₂·6H₂O, and NiSO₄·6H₂O) as raw materials. The effect of nickel sources on the microstructure and lithium storage performance of the nickel hydroxides is studied. It is found that all the three prepared samples are α-nickel hydroxide. The nickel hydroxides synthesized with Ni(NO₃)₂·6H₂ or NiCl₂·6H₂O show a similar particle size of 20–30 μm and are composed of very thin nano-sheets, while the nickel hydroxide synthesized with Ni(SO₄)₂·6H₂O shows a larger particle size (30–50 μm) and consists of very thin nano-walls. When applied as anode materials for lithium-ion batteries (LIBs), the nickel hydroxide synthesized with NiSO₄·6H₂O exhibits the highest discharge capacity, but its cyclic stability is very poor. The nickel hydroxides synthesized with NiCl₂·6H₂O exhibit higher discharge capacity than the nickel hydroxides synthesized with Ni(NO₃)₂·6H₂O, and both of them show much improved cyclic stability and rate capability as compared to the nickel hydroxide synthesized with Ni(SO₄)₂·6H₂O. Moreover, pseudocapacitive behavior makes a great contribution to the electrochemical energy storage of the three samples. The discrepancies of lithium storage performance of the three samples are analyzed by ex-situ XRD, FT-IR, electrochemical impedance spectroscopy (EIS), and cyclic voltammetry (CV) tests.     

Structural evolution,growth mechanism and photoluminescence properties of CuWO4 nanocrystals

Copper tungstate (CuWO₄) crystals were synthesized by the sonochemistry (SC) method, and then, heat treated in a conventional furnace at different temperatures for 1 h. The structural evolution, growth mechanism and photoluminescence (PL) properties of these crystals were thoroughly investigated. X-ray diffraction patterns, micro-Raman spectra and Fourier transformed infrared spectra indicated that crystals heat treated and 100 °C and 200 °C have water molecules in their lattice (copper tungstate dihydrate (CuWO₄·2H₂O) with monoclinic structure), when the crystals are calcinated at 300 °C have the presence of two phase (CuWO₄·2H₂O and CuWO₄), while the others heat treated at 400 °C and 500 °C have a single CuWO₄ triclinic structure. Field emission scanning electron microscopy revealed a change in the morphological features of these crystals with the increase of the heat treatment temperature. Transmission electron microscopy (TEM), high resolution-TEM images and selected area electron diffraction were employed to examine the shape, size and structure of these crystals. Ultraviolet–Visible spectra evidenced a decrease of band gap values with the increase of the temperature, which were correlated with the reduction of intermediary energy levels within the band gap. The intense photoluminescence (PL) emission was detected for the sample heat treat at 300 °C for 1 h, which have a mixture of CuWO₄·2H₂O and CuWO₄ phases. Therefore, there is a synergic effect between the intermediary energy levels arising from these two phases during the electronic transitions responsible for PL emissions.     

Synthesis and characterizations of hollow spheres and nanospheres of Au

Hollow spheres and nanospheres of Au have been prepared by a simple reaction of HAuCl₄·4H₂O, NaOH and (NH₂OH)₂·H₂SO₄ in the presence of gelatin. The role of gelatin and the effect of the temperature of the reaction in producing the spherical particles of Au are discussed. The products were characterized by powder X-ray diffraction (XRD), transmission electron microscopy and UV–Vis absorption spectroscopy. The sizes of the nanospheres of Au were estimated by the Debye–Scherrer formula according to the XRD spectrum. PACS  81.05.Bx; 81.05.Rm; 81.07.-b; 81.16.Be; 81.20.Fw     

纳米结构CoxFe3-xO4多孔微球的磁性及交换偏置效应研究

用乙二醇为溶剂,用三氯化铁、二氯化钴和醋酸铵为起始反应试剂,通过溶剂热反应首次合成了纳米结构Co_xFe_3-xO₄多孔微球.用X射线衍射仪(XRD)、透射电子显微镜(TEM)和扫描电子显微镜(SEM)表征样品的结构和形貌,结果表明,所制备的单分散Co_xFe_3-xO₄多孔微球为立方多晶结构,其直径约300 nm,是由约30 关键词： xFe_3-xO₄')" href="#">Co_xFe_3-xO₄ 多孔微球 磁性 交换偏置效应     

Ultrasound irradiation effect on morphology and size of two new potassium coordination supramolecule compounds

Two new potassium coordination supramolecular compounds (2D and 1D), [K(H₃L)(H₂L)(H₂O)]_n·H₂O (1) and [K(H₂L′)(HL′)(H₂O)₂]·H₂O (2), (L = 1,3,5-tricarboxylic acid, L′ = 2,6-pyridinedicarboxylic acid), have been synthesized under different experimental conditions. Micrometric crystals (bulk) or nano-sized materials have been obtained depending on using the branch tube method or sonochemical irradiation. All materials have been characterized by field emission scanning electron microscopy (FE-SEM), scanning electron microscopy (SEM), powder X-ray diffraction (PXRD), FT-IR spectroscopy and elemental analyses. Single crystal X-ray analyses on compounds 1 and 2 show that K⁺ ions are 3- and 7-coordinated, respectively. Additionally, H-bonds incorporate the layers and chains in 1 and 2 into 3D and 2D (along (0,0,1) direction) frameworks. Topological analysis shows that the compound 1 and 2 are 3,6-coordinated kgd and 2,4-coordinated 2,4C4 net. The thermal stability of compounds 1 and 2 in bulk and nano-size has been studied by thermal gravimetric (TG) and differential thermal analyses (DTA) and compared each other. The role of different parameters like temperature, reaction time and ultrasound irradiation power on the growth and morphology of the nano-structures are studied. Results suggest that an increase of temperature, sonication power and reduction of reaction time led to a particle size decrease.     

Mesoporous silica templated zirconia nanoparticles

Nanoparticles of zirconium oxide (ZrO₂) were synthesized by infiltration of a zirconia precursor (ZrOCl₂·8H₂O) into a SBA-15 mesoporous silica mold using a wet-impregnation technique. X-ray diffractometry and high-resolution transmission electron microscopy show formation of stable ZrO₂ nanoparticles inside the silica pores after a thermal treatment at 550 °C. Subsequent leaching out of the silica template by NaOH resulted in well-dispersed ZrO₂ nanoparticles with an average diameter of ~4 nm. The formed single crystal nanoparticles are faceted with 110 surfaces termination suggesting it to be the preferred growth orientation. A growth model of these nanoparticles is also suggested.     

Synthesis and electrocatalytic activities of Co<Subscript>3</Subscript>O<Subscript>4</Subscript> nanocubes

In this article, a hydrothermal method was developed to synthesize Co₃O₄ nanocubes using hydrogen peroxide (H₂O₂) as oxidant, Co(NO₃)₂·6H₂O as a cobalt source. The products are characterized in detail by multiform techniques including X-ray diffraction (XRD), energy dispersive X-ray analysis (EDS), scanning electron microscopy (SEM), and transmission electron microscopy (TEM). The results show that the obtained products are Co₃O₄ nanocubes with size ranging between 20 and 40 nm. The effects of the hydrogen peroxide concentration on the size of the products have been studied. The electrocatalytic activities of H₂O₂ reduction on Co₃O₄ nanocubes in phosphate buffer were also evaluated.     

Sonochemical synthesis of Dy2(CO3)3 nanoparticles,Dy(OH)3 nanotubes and their conversion to Dy2O3 nanoparticles

Dysprosium carbonates nanoparticles were synthesized by the reaction of dysprosium acetate and NaHCO₃ by a sonochemical method. Dysprosium oxide nanoparticles with average size about 17 nm were prepared from calcination of Dy₂(CO₃)₃·1.7H₂O nanoparticles. Dy(OH)₃ nanotubes were synthesized by sonication of Dy(OAC)₃·6H₂O and N₂H₄. The as-synthesized nanostructures were characterized by scanning electron microscopy (SEM), X-ray powder diffraction (XRD), transmission electron microscopy (TEM), and Fourier transform infrared spectroscopy (FT-IR). Photoluminescence measurement shows that the nanoparticles have two emission peaks around 17,540 cm^?1 and 20,700 cm^?1, which should come from the electron transition from ⁴F_9/2 → ⁶H_15/2 levels and ⁴F_9/2 → ⁶H_13/2 levels, respectively. The effect of calcination temperature and sonication time was investigated on the morphology and particle size of the products. The sizes could be controlled by the feeding rate of the precipitating agent (NaHCO₃ and N₂H₄) and slower feeding rate lead to smaller nanoparticles.     

Synthesis of CoFe<Subscript>2</Subscript>O<Subscript>4</Subscript> nanoparticles with tunable magnetism by the modified hydrothermal method

Cobalt ferrite (CoFe₂O₄) nanoparticles were synthesized by using the hydrothermal route with the addition of trisodium citrate dihydrate (Na₃CA·2H₂O). The formation of CoFe₂O₄ nanoparticles with size ranging from 13 to 19 nm was confirmed by X-ray diffraction, energy dispersive X-ray analysis, and Fourier transform infrared spectroscopy; the clear-cut sharp of the nanoparticles was observed by transmission electron microscopy. By these characterization methods, the evolution of lattice constant and morphologies of the nanoparticles with the addition of Na₃CA·2H₂O is observed. Furthermore, the magnetic hysteresis loops measured at room temperature indicate that the magnetic properties of the products also show clear relationship with the masses of Na₃CA·2H₂O. For example, coercivity and high-field paramagnetic susceptibility increase with the increasing masses of Na₃CA·2H₂O, whereas the saturation magnetization and the effective magnetic anisotropy constant have the maximum values as the mass of Na₃CA·2H₂O is 1 g. This change of magnetic properties is related with the expanded lattice and the varied size and shape because of the addition of Na₃CA·2H₂O.     

Combined SANS and SAXS study of the action of ultrasound on the structure of amorphous zirconia gels

In the present work, we have studied for the first time the combined effect of both sonication and precipitation pH on the structure of amorphous zirconia gels synthesized from zirconium(IV) propoxide. The techniques of small-angle neutron and X-ray scattering (SANS and SAXS) and low temperature nitrogen adsorption provided the integral data on the changes in the microstructure and mesostructure of these materials caused by ultrasonic (US) treatment. Amorphous ZrO₂·xH₂O synthesized under ultrasonic treatment was found to possess a very structured surface, characterized by the surface fractal dimension 2.9–3.0, compared to 2.3–2.5 for the non US-assisted synthesis, and it was also found to possess a higher specific surface area, while the sizes of the primary particles remain unchanged.