Effect of high intensity ultrasound on transglutaminase-catalyzed soy protein isolate cold set gel

The effects of high intensity ultrasound (HIU, 105–110 W/cm² for 5 or 40 min) pre-treatment of soy protein isolate (SPI) on the physicochemical properties of ensuing transglutaminase-catalyzed soy protein isolate cold set gel (TSCG) were investigated in this study. The gel strength of TSCG increased remarkably from 34.5 to 207.1 g for TSCG produced from SPI with 40 min HIU pre-treatment. Moreover, gel yield and water holding capacity also increased after HIU pre-treatments. Scanning electron microscopy showed that HIU of SPI resulted in a more uniform and denser microstructure of TSCG. The content of free sulfhydryl (SH) groups was higher in HIU TSCG than non-HIU TSG, even though greater decrease of the SH groups present in HIU treated SPI was observed when the TSCG was formed, suggesting the involvement of disulfide bonds in gel formation. Protein solubility of TSCG in both denaturing and non-denaturing solvents was higher after HIU pretreatment, and changes in hydrophobic amino acid residues as well as in polypeptide backbone conformation and secondary structure of TSCG were demonstrated by Raman spectroscopy. These results suggest that increased inter-molecular ε-(γ-glutamyl) lysine isopeptide bonds, disulfide bonds and hydrophobic interactions might have contributed to the HIU TSCG gel network. In conclusion, HIU changed physicochemical and structural properties of SPI, producing better substrates for TGase. The resulting TSCG network structure was formed with greater involvement of covalent and non-covalent interactions between SPI molecules and aggregates than in the TSCG from non-HIU SPI.     

Functional properties of ultrasonically generated flaxseed oil-dairy emulsions

This study reports on the functional properties of 7% flaxseed oil/milk emulsion obtained by sonication (OM) using 20 kHz ultrasound (US) at 176 W for 1–8 min in two different delivery formulae, viz., ready-to-drink (RTD) and lactic acid gel. The RTD emulsions showed no change in viscosity after sonication for up to 8 min followed by storage up to a minimum of 9 days at 4 ± 2 °C. Similarly, the oxidative stability of the RTD emulsion was studied by measuring the conjugated diene hydroperoxides (CD). The CD was unaffected after 8 min of ultrasonic processing. The safety aspect of US processing was evaluated by measuring the formation of CD at different power levels. The functional properties of OM gels were evaluated by small and large scale deformation studies. The sonication process improved the gelation characteristics, viz., decreased gelation time, increased elastic nature, decreased syneresis and increased gel strength. The presence of finer sono-emulsified oil globules, stabilized by partially denatured whey proteins, contributed to the improvements in the gel structure in comparison to sonicated and unsonicated pasteurized homogenized skim milk (PHSM) gels. A sono-emulsification process of 5 min followed by gelation for about 11 min can produce gels of highest textural attibutes.     

Effect of high-intensity ultrasound on the technofunctional properties and structure of jackfruit (Artocarpus heterophyllus) seed protein isolate

The influence of high-intensity ultrasound (HIU) on the technofunctional properties and structure of jackfruit seed protein isolate (JSPI) was investigated. Protein solutions (10%, w/v) were sonicated for 15 min at 20 kHz to the following levels of power output: 200, 400, and 600 W (pulse duration: on-time, 5 s; off-time 1 s). Compared with untreated JSPI, HIU at 200 W and 400 W improved the oil holding capacity (OHC) and emulsifying capacity (EC), but the emulsifying activity (EA) and emulsion stability (ES) increased at 400 W and 600 W. The foaming capacity (FC) increased after all HIU treatments, as opposed to the water holding capacity (WHC), least gelation concentration (LGC), and foaming stability (FS), which all decreased except at pH 4 for FS. Tricine sodium dodecyl sulfate polyacrylamide gel electrophoresis (Tricine-SDS-PAGE) showed changes in the molecular weight of protein fractions after HIU treatment. Scanning electron microscopy (SEM) demonstrated that HIU disrupted the microstructure of JSPI, exhibiting larger aggregates. Surface hydrophobicity and protein solubility of the JSPI dispersions were enhanced after ultrasonication, which increased the destruction of internal hydrophobic interactions of protein molecules and accelerated the molecular motion of proteins to cause protein aggregation. These changes in the technofunctional and structural properties of JSPI could meet the complex needs of manufactured food products.     

Effects of ultrasound on the beef structure and water distribution during curing through protein degradation and modification

The objective of this study was to explore the mechanisms of power ultrasound (PUS, 150 and 300 W) and treatment time (30 and 120 min) on the water-holding capacity (WHC) and tenderness of beef during curing. Beef muscle at 48 h post mortem was subjected to PUS treatment at a frequency of 20 kHz. Analysis of compression loss and shear force showed that PUS-assisted curing significantly increased the WHC and the tenderness of beef compared to static brining (p < 0.05). According to the analysis of LF-NMR, PUS treatment could increase the P₂₁ values which indicated an improvement in water-binding ability of beef muscle. SDS-PAGE and LC-ESI-MS/MS analysis suggested that PUS induced moderate oxidation of myosin causing polymerization, which may contribute to increased water retention. On the other hand, an increased tenderness of beef is suggested by the increased MFI values and proteolysis of desmin and troponin-T. Transmission electron microscopy (TEM) further supported the effects of PUS on WHC and tenderness changes due to the swelling and disruption of myofibrils. Thus, these results provide knowledge about the mechanism for improving WHC and tenderness of beef by PUS curing, which could be employed as an emerging technology for various meat curing processes.     

Ultrasonic processing of dairy systems in large scale reactors

High intensity low frequency ultrasound was used to process dairy ingredients to improve functional properties. Based on a number of lab-scale experiments, several experimental parameters were optimised for processing large volumes of whey and casein-based dairy systems in pilot scale ultrasonic reactors. A continuous sonication process at 20 kHz capable of delivering up to 4 kW of power with a flow-through reactor design was used to treat dairy ingredients at flow rates ranging from 200 to 6000 mL/min. Dairy ingredients treated by ultrasound included reconstituted whey protein concentrate (WPC), whey protein and milk protein retentates and calcium caseinate. The sonication of solutions with a contact time of less than 1 min and up to 2.4 min led to a significant reduction in the viscosity of materials containing 18% to 54% (w/w) solids. The viscosity of aqueous dairy ingredients treated with ultrasound was reduced by between 6% and 50% depending greatly on the composition, processing history, acoustic power and contact time. A notable improvement in the gel strength of sonicated and heat coagulated dairy systems was also observed. When sonication was combined with a pre-heat treatment of 80 °C for 1 min or 85 °C for 30 s, the heat stability of the dairy ingredients containing whey proteins was significantly improved. The effect of sonication was attributed mainly to physical forces generated through acoustic cavitation as supported by particle size reduction in response to sonication. As a result, the gelling properties and heat stability aspects of sonicated dairy ingredients were maintained after spray drying and reconstitution. Overall, the sonication procedure for processing dairy systems may be used to improve process efficiency, improve throughput and develop value added ingredients with the potential to deliver economical benefits to the dairy industry.     

Ultrasonically enhanced fractionation of milk fat in a litre-scale prototype vessel

The ultrasonic fractionation of milk fat in whole milk to fractions with distinct particle size distributions was demonstrated using a stage-based ultrasound-enhanced gravity separation protocol. Firstly, a single stage ultrasound gravity separation was characterised after various sonication durations (5–20 min) with a mass balance, where defined volume partitions were removed across the height of the separation vessel to determine the fat content and size distribution of fat droplets. Subsequent trials using ultrasound-enhanced gravity separation were carried out in three consecutive stages. Each stage consisted of 5 min sonication, with single and dual transducer configurations at 1 MHz and 2 MHz, followed by aliquot collection for particle size characterisation of the formed layers located at the bottom and top of the vessel. After each sonication stage, gentle removal of the separated fat layer located at the top was performed.Results indicated that ultrasound promoted the formation of a gradient of vertically increasing fat concentration and particle size across the height of the separation vessel, which became more pronounced with extended sonication time. Ultrasound-enhanced fractionation provided fat enriched fractions located at the top of the vessel of up to 13 ± 1% (w/v) with larger globules present in the particle size distributions. In contrast, semi-skim milk fractions located at the bottom of the vessel as low as 1.2 ± 0.01% (w/v) could be produced, containing proportionally smaller sized fat globules. Particle size differentiation was enhanced at higher ultrasound energy input (up to 347 W/L). In particular, dual transducer after three-stage operation at maximum energy input provided highest mean particle size differentiation with up to 0.9 μm reduction in the semi-skim fractions. Higher frequency ultrasound at 2 MHz was more effective in manipulating smaller sized fat globules retained in the later stages of skimming than 1 MHz. While 2 MHz ultrasound removed 59 ± 2% of the fat contained in the initial sample, only 47 ± 2% was removed with 1 MHz after 3 ultrasound-assisted fractionation stages.     

Synthesis of sub-micronic and nanometric PMMA particles via emulsion polymerization assisted by ultrasound: Process flow sheet and characterization

PMMA particle synthesis was performed from MMA (methyl methacrylate) and water mixtures, exposed to different ultrasonic systems and frequencies. The sonication sequence was 20 kHz → 580 kHz → 858 kHz → 1138 kHz, and the solution was sampled after each irradiation step for polymerization. Effects of sonication parameters (time, power), polymerization method (thermo-initiated or photo-initiated), use of small amounts of surfactant (Triton X-100™ or Tween® 20) and initial MMA quantity were investigated on particle size and synthesis yields. Particle size and size distribution were measured by DLS (Dynamic Light Scattering), and confirmed via SEM (Scanning Electron Microscopy) images. Synthesis yield was calculated using the dry weight method. Particle composition was estimated using FTIR (Fourier Transform Infra-Red) spectroscopy. PMMA (polymethylmethacrylate) monodispersed particles were successfully synthesized, with a possibility of control in the 78–310 nm size range. These sized-controlled particles were synthesized with a 7.5–85% synthesis yield (corresponding to 7.5–40 g/L particle solid content), depending on operational parameters. Furthermore, a trade-off between particle size and synthesis yield can be proposed: 20 kHz → 10 min waiting time → 580 kHz → 858 kHz leading to 90 nm particles diameter with 72% yield in less than 40 min for the whole sequence. Thus, the synthesis under ultrasound can be found easy to implement and time efficient, ensuring the success of the scale-up approach and opening up industrial applications for this type of polymeric particles.     

Combined effect of blanching and sonication on quality parameters of bottle gourd (Lagenaria siceraria) juice

This study evaluated the combined effect of blanching and sonication treatment on selected quality parameters of bottle gourd juice (BGJ). Bottle gourd cubes were blanched and juice was extracted. Effect of frequency (20–50 kHz), amplitude (50–90%) and time (10–30 min) was also studied on quality parameters like titratable acidity (TA), pH, total soluble solids (TSS), physical stability (PS), ascorbic acid (AA), total phenolics (TP), total carotenoids (TC), browning index (BI), total plate count (TPC) and yeast & mold count (Y&M) of BGJ to derive the level of these parameters. Combined effect of blanching followed by sonication (BFS) showed significant (P ⩽ 0.05) change in all quality parameters except TA. Highest percentage of TSS (5.9 °B), PS (2%), AA (18.99 mg/100 g), TP (1010 mg/100 g) and TC (5.8 mg/100 g) was observed at 70% amplitude, 50 kHz frequency and 20 min. Results suggested 70% amplitude, 50 kHz frequency and 20 min as best treatment conditions for processing of BGJ. Microstructure examination, transmission electron microscopy (TEM) and laser diffraction analysis of BGJ showed significant change in particle size and distribution. Moreover, TEM of blanched and sonicated samples of BGJ also showed significant (P ⩽ 0.05) change in microbial profile.     

Physicochemical characterization of black seed oil-milk emulsions through ultrasonication

The ultrasonic formation of stable emulsions of a bioactive material, black seed oil, in skim milk was investigated. The incorporation of 7% of black seed oil in pasteurised homogenized skim milk (PHSM) using 20 kHz high intensity ultrasound was successfully achieved. The effect of sonication time and acoustic power on the emulsion stability was studied. A minimum process time of 8 min at an applied acoustic power of 100 W was sufficient to produce emulsion droplets stable for at least 8 days upon storage at 4 ± 2 °C, which was confirmed through creaming stability, particle size, rheology and color analysis. Partially denatured whey proteins may provide stability to the emulsion droplets and in addition to the cavitation effects of ultrasound are responsible for the production of smaller sized emulsion droplets.     

Stability of atmospheric-pressure plasma induced changes on polycarbonate surfaces

Polycarbonate films are subjected to plasma treatment in a number of applications such as improving adhesion between polycarbonate and silicon alloy in protective and optical coatings. The surfaces that undergo changes in surface properties due to plasma treatment have a tendency to revert back to their original states. Thus, the stability of the plasma induced changes on polymer surfaces over a desired time period is an important issue. The objective of this study was to examine the effect of ageing on atmospheric-pressure helium-plasma treated polycarbonate (PC) sample as a function of treatment time. The ageing effects were studied over a period of 10 days. The samples were plasma treated for 0.5, 2, 5 and 10 min. Contact angle made by water droplet on polymer surfaces were measured to study surface energy changes. Modification of surface chemical structure was examined using X-ray photoelectron spectroscopy (XPS). Contact angle decreased from 93° for untreated samples to 30° for samples treated with plasma for 10 min. After 10 days the contact angle for the 10 min plasma treated sample increased to 67°, but it never reverted back to that of the untreated surface. Similarly, the oxygen-carbon (O:C) ratio increased from 0.136 for untreated samples to 0.321 for 10 min plasma-treated samples, indicating an increase in surface energy.     

Thermosonication as a potential quality enhancement technique of apple juice

Enzymatic browning and microbial growth lead to quality losses in apple products. In the present study, fresh apple juice was thermosonicated using ultrasound in-bath (25 kHz, 30 min, 0.06 W cm⁻³) and ultrasound with-probe sonicator (20 kHz, 5 and 10 min, 0.30 W cm⁻³) at 20, 40 and 60 °C for inactivation of enzymes (polyphenolase, peroxidase and pectinmethylesterase) and microflora (total plate count, yeast and mold). Additionally, ascorbic acid, total phenolics, flavonoids, flavonols, pH, titratable acidity, ^°Brix and color values influenced by thermosonication were investigated. The highest inactivation of enzymes was obtained in ultrasound with-probe at 60 °C for 10 min, and the microbial population was completely inactivated at 60 °C. The retention of ascorbic acid, total phenolics, flavonoids and flavonols were significantly higher in ultrasound with-probe than ultrasound in-bath at 60 °C. These results indicated the usefulness of thermosonication for apple juice processing at low temperature, for enhanced inactivation of enzymes and microorganisms.     

Ultrasound improves the renneting properties of milk

The effects of ultrasound application on skim milk (10% w/w total solids at natural pH 6.7 or alkali-adjusted to pH 8.0) prior to the renneting of milk at pH 6.7 were examined. Skim milk, made by reconstituting skim milk powder, was sonicated at 20 kHz and 30 °C (dissipated power density 286 kJ kg⁻¹) in an ultrasonic reactor. The rennet gelation time, curd firming rate, curd firmness, and the connectivity of the rennet gel network were improved significantly in rennet gels made from milk ultrasonicated at pH 8.0 and re-adjusted back to pH 6.7 compared to those made from milk sonicated at pH 6.7. These renneting properties were also improved in milk sonicated at pH 6.7 compared to those of the non-sonicated control milk. The improvements in renneting behavior were related to ultrasound-induced changes to the proteins in the milk. This study showed that ultrasonication has potential to be used as an intervention to manipulate the renneting properties of milk for more efficient manufacturing of cheese.     

Effect of ultrasound and centrifugal force on carambola (Averrhoa carambola L.) slices during osmotic dehydration

Osmotic dehydration (OD) of carambola slices were carried out using glucose, sucrose, fructose and glycerol as osmotic agents with 70 °Bx solute concentration, 50 °C of temperature and for time of 180 min. Glycerol and sucrose were selected on the basis of their higher water loss, weight reduction and lowers solid gain. Further the optimization of OD of carambola slices (5 mm thick) were carried out under different process conditions of temperature (40–60 °C), concentration of sucrose and glycerol (50–70 °Bx), time (180 min) and fruit to solution ratio (1:10) against various responses viz. water loss, solid gain, texture, rehydration ratio and sensory score according to a composite design. The optimized value for temperature, concentration of sucrose and glycerol has been found to be 50 °C, 66 °Bx and 66 °Bx respectively. Under optimized conditions the effect of ultrasound for 10, 20, 30 min and centrifugal force (2800 rpm) for 15, 30, 45 and 60 min on OD of carambola slices were checked. The controlled samples showed 68.14% water loss and 13.05% solid gain in carambola slices. While, the sample having 30 min ultrasonic treatment showed 73.76% water loss and 9.79% solid gain; and the sample treated with centrifugal force for 60 min showed 75.65% water loss and 6.76% solid gain. The results showed that with increasing in treatment time the water loss, rehydration ratio were increased and solid gain, texture were decreased.     

Molecular weight distribution,rheological property and structural changes of sodium alginate induced by ultrasound

In this study, the effects of ultrasound with different ultrasonic frequencies on the properties of sodium alginate (ALG) were investigated, which were characterized by the means of the multi-angle laser light scattering photometer analysis (GPC-MALLS), rheological analysis, circular dichroism (CD) spectrometer and scanning electron microscope (SEM). It showed that the molecular weight (M_w) and molecular number (M_n) of the untreated ALG was 1.927 × 10⁵ g/mol and 4.852 × 10⁴ g/mol, respectively. The M_w of the ultrasound treated ALG was gradually increased from 3.50 × 10⁴ g/mol to 7.34 × 10⁴ g/mol while the M_n of ALG was increased and then decreased with the increase of the ultrasonic frequency. The maximum value of M_n was 9.988 × 10⁴ g/mol when the ALG was treated by ultrasound at 40 kHz. It indicated that ultrasound could induce ALG degradation and rearrangement. The number of the large molecules and small molecules of ALG was changed by ultrasound. The value of d_n/d_c suggested that the ultrasound could enhance the stability of ALG. Furthermore, it was found that ALG treated by ultrasound at 50 kHz tended to be closer to a Newtonian behavior, while the untreated and treated ALG solutions exhibited pseudoplastic behaviours. Moreover, CD spectra demonstrated that ultrasound could be used to improve the strength of the gel by changing the ratio of M/G, which showed that the minimum ratio of M/G of ALG treated at 135 kHz was 1.34. The gel-forming capacity of ALG was correlated with the content of G-blocks. It suggested that ALG treated by ultrasound at 135 kHz was stiffer in the process of forming gels. The morphology results indicated that ultrasound treatment of ALG at 135 kHz increased its hydrophobic interaction and interfacial activity. This study is important to explore the effect of ultrasound on ALG in improving the physical properties of ALG as food additives, enzyme and drug carriers.     

Effect of ultrasound frequency on antioxidant activity,total phenolic and anthocyanin content of red raspberry puree

Ultrasound in the 20–1000 kHz range show unique propagation characteristics in fluid media and possess energy that can break down fruit matrices to facilitate the extraction of valuable bioactive compounds. Red raspberries carry significant amounts of specific antioxidants, including ellagitannins and anthocyanins that are important for human health. The objective of this study was to investigate the effects of ultrasound frequencies associated with cavitation (20 kHz) and microstreaming (490 and 986 kHz) on total antioxidant activity (AOA), total phenolics content (TPC), and total monomeric anthocyanin content (ACY) of red raspberry puree prepared from crushed berries. The pureed fruit was subjected to high-intensity (20 kHz) and higher frequency-low intensity (490 and 986 kHz) ultrasound for 30 min. The temperature of treated purees increased to a maximum of 56 °C with 986 kHz. Sonication at 20 and 490 kHz significantly (p < 0.05) affected the AOA, ACY, and TPC of red raspberry puree, while 986 kHz had no significant effect on ACY and AOA (p < 0.05). In all cases, ultrasound treatment had significant and positive effect on at least one of the measured parameters up to 30 min. Sonication beyond 10 min (and up to 30 min) using 20 kHz either produced no change or caused a drop in AOA and ACY. However, for 986 and 20 kHz, TPC, increased by 10% and 9.5%, respectively after 30 min (p < 0.05) compared to the control. At 20 kHz, AOA and ACY increased by 17.3% and 12.6% after 10 min. It was demonstrated that 20 kHz ultrasound treatment, when limited to 10 min, was the most effective for extraction of bioactive compounds in red raspberry compared to 490 and 986 kHz although the effect could be similar at the higher frequencies if different amplitudes are used.     

Combined effect of ultrasound,heat, and pressure on Escherichia coli O157:H7, polyphenol oxidase activity,and anthocyanins in blueberry (Vaccinium corymbosum) juice

The objective of this study was to evaluate the effect of different treatments—heat treatment (HT), sonication (SC), thermosonication (TS), manosonication (MS), manothermal (MT), and manothermosonication (MTS) on Escherichia coli O157:H7, polyphenol oxidase (PPO), and anthocyanin content in blueberry juice. First, samples were treated at different temperatures (30, 40, 50, 60, 70, and 80 °C) and power intensities (280, 420, 560, and 700 W) for 10 min. Subsequently, samples were treated using combinations of power intensity and mild temperature for 10 min. For further study, samples were treated using HT (80 °C), TS (40 °C, 560 W), MT (350 MPa, 40 °C), MS (560 W, 5 min/350 MPa), or MTS (560 W, 5 min, 40 °C/350 MPa, 40 °C) for 5, 10, 15, 20 min for each treatment, and the results compared between treatments. HT significantly reduced PPO activation (2.05% residual activity after only 5 min), and resulted in a 2.00-log reduction in E. coli O157:H7 and an 85.25% retention of anthocyanin. Escherichia coli O157:H7 was slightly inactivated by TS after 5 min (0.17-log reduction), while residual PPO activity was 23.36% and anthocyanin retention was 98.48%. However, Escherichia coli O157:H7 was rapidly inactivated by MTS (5.85-log reduction) after 5 min, while anthocyanin retention was 97.49% and residual PPO activity dropped to 10.91%. The destruction of E. coli cells as a result of these treatments were confirmed using SEM and TEM. Therefore, a combination of sonication, high pressure, and mild heat allows the safety of blueberry juice to be maintained without compromising the retention of desirable antioxidant compounds.     

Thermosonication effect on bioactive compounds,enzymes activity,particle size,microbial load,and sensory properties of almond (Prunus dulcis) milk

The object of this research was to appraise the physicochemical characteristics of almond milk and consumer acceptability after the thermosonication (TS) processing. The almond milk was subjected to TS processing (frequency: 40 kHz; power: 600 W; Temperature: 30, 45, and 60 °C; Time: 10, 20, 30, and 40 min) and pasteurization (for 60 s at 90 °C). After treatments, all samples were analyzed for bioactive compounds, antioxidant activities, microbial, enzymatic, and sensory attributes. The results showed a non-significant difference in total soluble solids and pH while TS processing at 45 and 60 °C significantly increased the cloudiness, viscosity, browning index, and color properties. TS processing increased the bioavailability of total phenolic, flavonols, flavonoids, condensed tannin contents, and antioxidant activity as compared to untreated and pasteurized samples. TS processing also significantly reduced the particle size distribution through acoustic cavitation. Microbial inactivation with TS at 60 °C resulted in ≥ 5 log reduction of total plate count and ≥ 4 log reduction of yeast & mold was achieved. The highest inhibition of lipoxygenase (LOX) and peroxidase (POD) were observed at 60 °C for 30 min. Moreover, the best sensorial properties were observed after TS processing at 60 °C. Thus; TS processing can increase the almond milk quality and safety as a viable substitute for thermal processing.     

The effect of low frequency ultrasound on the production and properties of nanocrystalline cellulose suspensions and films

Suspension of nanocrystalline cellulose (NCC) produced from bleached cotton by controlled sulphuric acid hydrolysis was treated with low frequency ultrasound at 20 kHz and 60% amplitude for 0, 1, 2, 5 and 10 min and the effects of sonication on the properties of both the cellulose nanocrystals and their aqueous suspensions were investigated. Furthermore, a series of nanocellulose films were manufactured from the suspensions that were sonicated for different periods of time and tested. Laser diffraction analysis and transmission electron microscopy proved that sonication not only disintegrated the large NCC aggregates (D_v50 14.7 μm) to individual nanowhiskers with an average length and width of 171 ± 57 and 17 ± 4 nm, respectively, but also degraded the nanocrystals and yielded shorter and thinner particles (118 ± 45 and 13 ± 3 nm, respectively) at 10-min sonication. The ultrasound-assisted disintegration to nano-sized cellulose whiskers decreased the optical haze of suspensions from 98.4% to 52.8% with increasing time from 0 to 10 min, respectively. Sonication of the suspensions significantly contributed to the preparation of films with low haze (high transparency) and excellent tensile properties. With the increasing duration of sonication, the haze decreased and the tensile strength rose gradually. Irrespectively of sonication, however, all films had an outstanding oxygen transmission rate in a range of 5.5–6.9 cm³/m² day, and a poor thermal stability.     

Coarsening phenomena of metal nanoparticles and the influence of the support pre-treatment: Pt/TiO2(110)

One of the technologically most important requirements for the application of oxide-supported metal nanoparticles (NPs) in the fields of molecular electronics, plasmonics, and catalysis is the achievement of thermally stable systems. For this purpose, a thorough understanding of the different pathways underlying thermally-driven coarsening phenomena, and the effect of the nanoparticle synthesis method, support morphology, and degree of support reduction on NP sintering is needed. In this study, the sintering of supported metal NPs has been monitored via scanning tunneling microscopy combined with simulations following the Ostwald ripening and diffusion-coalescence models. Modifications were introduced to the diffusion-coalescence model to incorporate the correct temperature dependence and energetics. Such methods were applied to describe coarsening phenomena of physical-vapor deposited (PVD) and micellar Pt NPs supported on TiO₂(110). The TiO₂(110) substrates were exposed to different pre-treatments, leading to reduced, oxidized and polymer-modified TiO₂ surfaces. Such pre-treatments were found to affect the coarsening behavior of the NPs.No coarsening was observed for the micellar Pt NPs, maintaining their as-prepared size of ~ 3 nm after annealing in UHV at 1060 °C. Regardless of the initial substrate pre-treatment, the average size of the PVD-grown NPs was found to increase after identical thermal cycles, namely, from 0.5 ± 0.2 nm to 1.0 ± 0.3 nm for pristine TiO₂, and from 0.8 ± 0.3 nm to 1.3 ± 0.6 nm for polymer-coated TiO₂ after identical thermal treatments. Although no direct real-time in situ microscopic evidence is available to determine the dominant coarsening mechanism of the PVD NPs unequivocally, our simulations following the diffusion-coalescence coarsening route were in significantly better agreement with the experimental data as compared to those based on the Ostwald-ripening model. The enhanced thermal stability of the micellar NPs as compared to the PVD clusters might be related to their initial larger NP size, narrower size distribution, and larger interparticle distances.     

Effect of ultrasonic treatment on the polyphenol content and antioxidant capacity of extract from defatted hemp,flax and canola seed cakes

The effectiveness of ultrasonic extraction of phenolics and flavonoids from defatted hemp, flax and canola seed cakes was compared to the conventional extraction method. Ultrasonic treatment at room temperature showed increased polyphenol extraction yield and antioxidant capacity by two-fold over the conventional extraction method. Different combinations of ultrasonic treatment parameters consisting of solvent volume (25, 50, 75 and 100 mL), extraction time (20, 30 and 40 min) and temperature (40, 50, 60 and 70 °C) were selected for polyphenol extractions from the seed cakes. The chosen parameters had a significant effect (p < 0.05) on the polyphenol extraction yield and subsequent antioxidant capacity from the seed cakes. Application of heat during ultrasonic extraction yielded higher polyphenol content in extracts compared to the non-heated extraction. From an orthogonal design test, the best combination of parameters was 50 mL of solvent volume, 20 min of extraction time and 70 °C of ultrasonic temperature.