Intensification of sonochemical decolorization of anthraquinonic dye Acid Blue 25 using carbon tetrachloride

In this work, the influence of CCl₄ on the sonochemical decolorization of anthraquinonic dye Acid Blue 25 (AB25) in aqueous medium was investigated using high frequency ultrasound (1700 kHz). This frequency, reputed ineffective, was tested in order to introduce the ultrasound waves with high frequency in the field of degradation or removal of dyes from wastewater, due to its limited use in this field, and to increase the application of high frequency ultrasound wave in the field of environmental protection. The effects of various parameters such as the concentration of CCl₄, frequency (22.5 and 1700 kHz), solution pH, temperature and tert-butyl alcohol adding on the decolorization rate of AB25 was studied. The obtained results clearly demonstrated the significant intensification of AB25 decolorization in the presence of CCl₄. The enhancement effect of CCl₄ increased by decreasing temperature and by increasing the CCl₄ concentration. The pH has a significant influence on the bleaching of dye both in the absence and presence of CCl₄. The three investigated dosimeter methods (KI oxidation, Fricke reaction and H₂O₂ production) well corroborate the improvement of the sonochemical effects in the presence of CCl₄. The best sonochemical decolorization rate of AB25 in aqueous solution both in the absence and presence of CCl₄ is observed to occur at 1700 kHz compared to 22.5 kHz. The sonochemical oxidation of CCl₄ generates oxidizing species in the liquid phase that are highly beneficial for oxidation of hydrophilic and non-volatile pollutant, such as dyes, because they are less susceptible to free radical attack due to lower stability of the generated free radicals.     

Degradation of imidacloprid containing wastewaters using ultrasound based treatment strategies

The present work deals with application of sonochemical reactors for the treatment of imidacloprid containing wastewaters either individually or in combination with other advanced oxidation processes. Experiments have been performed using two different configurations of sonochemical reactors viz. ultrasonic horn (20 kHz frequency and rated power of 240 W) and ultrasonic bath equipped with radially vibrating horn (25 kHz frequency and 1 kW rated power). The work also investigates the effect of addition of process intensifying agents such as H₂O₂ and CuO, which can enhance the production of free radicals in the system. The combination studies with advanced oxidation process involve the advanced Fenton process and combination of ultrasound with UV based oxidation. The extent of degradation obtained using combination of US and H₂O₂ at optimum loading of H₂O₂ was found to be 92.7% whereas 96.5% degradation of imidacloprid was achieved using the combination of US and advanced Fenton process. The process involving the combination of US, UV and H₂O₂ was found to be the best treatment approach where complete degradation of imidacloprid was obtained with 79% TOC removal. It has been established that the use of cavitation in combination with different oxidation processes can be effectively used for the treatment of imidacloprid containing wastewater.     

Sonolysis of levodopa and paracetamol in aqueous solutions

Pharmaceutical products are often present in wastewater treatment effluents, rivers, lakes and, more rarely, in groundwater. The advanced oxidation methods, like ultrasound, find a promising future in the area of wastewater treatment. The aim of this paper is to evaluate the influence of several parameters of the ultrasound process on the degradation of paracetamol, a widely used non-steroidal anti-inflammatory recalcitrant drug found in water and levodopa, the most frequently prescribed drug for the treatment of Parkinson disease. Experiments were carried out at 574, 860 and 1134 kHz of ultrasonic frequency with horn-type sonicator and actual power values of 9, 17, 22 and 32 W at 20 °C. Initial concentrations of 25, 50, 100 and 150 mg L^?1 of both products were used. Treatment efficiency was assessed following changes in pharmaceuticals concentration and chemical oxygen demand.The sonochemical degradation of both products follows a pseudo-first-order reaction kinetics. Complete removal of pharmaceuticals was achieved in some cases but some dissolved organic carbon remains in solution showing that long lived intermediates were recalcitrant to ultrasound irradiation. Pollutants conversion and COD removal were found to decrease with increasing the initial solute concentration and decreasing power. The best results were obtained with 574 kHz frequency. Investigations using 1-butanol as radical scavenger and H₂O₂ as promoter revealed that pollutants degradation proceeds principally through radical reactions, although some differences were observed between both molecules. Addition of H₂O₂ had a positive effect on degradation rate, but the optimum concentration of hydrogen peroxide depends on the pollutant.     

Enhancing decomposition rate of perfluorooctanoic acid by carbonate radical assisted sonochemical treatment

Perfluorooctanoic acid (PFOA) is a recalcitrant organic pollutant in wastewater because of its wide range of applications. Technologies for PFOA treatment have recently been developed. In this study, PFOA decomposition by sonochemical treatment was investigated to determine the effects of NaHCO₃ concentrations, N₂ saturation, and pH on decomposition rates and defluorination efficiencies. The results showed that PFOA decomposition by ultrasound treatment only (150 W, 40 kHz), with or without saturated N₂, was <25% after 4 h reaction. The extent and rate of PFOA decomposition and defluorination efficiencies of PFOA, however, greatly increased with the addition of carbonate radical reagents. PFOA was completely decomposed after 4 h of sonochemical treatment with a carbonate radical oxidant and saturated N₂. Without saturated N₂, PFOA was also decomposed to a high (98.81%) degree. The highest PFOA decomposition and defluorination efficiencies occurred in N₂ saturated solution containing an initial NaHCO₃ concentration of 30 mM. Sonodecomposition of PFOA with CO₃⁻ radical was most favorable in a slightly alkaline environment (pH = 8.65). There isn’t any shorter-chain perfluorinated carboxylic acids detected except fluorine ions in final reaction solution.     

Sonochemical water splitting in the presence of powdered metal oxides

Kinetics of hydrogen formation was explored as a new chemical dosimeter allowing probing the sonochemical activity of argon-saturated water in the presence of micro- and nano-sized metal oxide particles exhibiting catalytic properties (ThO₂, ZrO₂, and TiO₂). It was shown that the conventional sonochemical dosimeter based on H₂O₂ formation is hardly applicable in such systems due to catalytic degradation of H₂O₂ at oxide surface. The study of H₂ generation revealed that at low-frequency ultrasound (20 kHz) the sonochemical water splitting is greatly improved for all studied metal oxides. The highest efficiency is observed for relatively large micrometric particles of ThO₂ which is assigned to ultrasonically-driven particle fragmentation accompanied by mechanochemical water molecule splitting. The nanosized metal oxides do not exhibit particle size reduction under ultrasonic treatment but nevertheless yield higher quantities of H₂. The enhancement of sonochemical water splitting in this case is most probably resulting from better bubble nucleation in heterogeneous systems. At high-frequency ultrasound (362 kHz), the effect of metal oxide particles results in a combination of nucleation and ultrasound attenuation. In contrast to 20 kHz, micrometric particles slowdown the sonolysis of water at 362 kHz due to stronger attenuation of ultrasonic waves while smaller particles show a relatively weak and various directional effects.     

High frequency ultrasound as a selective advanced oxidation process to remove penicillinic antibiotics and eliminate its antimicrobial activity from water

This work studies the sonochemical degradation of a penicillinic antibiotic (oxacillin) in simulated pharmaceutical wastewater. High frequency ultrasound was applied to water containing the antibiotic combined with mannitol or calcium carbonate. In the presence of additives, oxacillin was efficiently removed through sonochemical action. For comparative purposes, the photo-Fenton, TiO₂ photocatalysis and electrochemical oxidation processes were also tested. Therefore, the evolution of the antibiotic and its associated antimicrobial activity (AA) were monitored. A high inhibition was found for the other three oxidation processes in the elimination of the antimicrobial activity caused by the additives; while for the ultrasonic treatment, a negligible effect was observed. The sonochemical process was able to completely degrade the antibiotic, generating solutions without AA. In fact, the elimination of antimicrobial activity showed an excellent performance adjusted to exponential kinetic-type decay. The main sonogenerated organic by-products were determined by means of HPLC-MS. Four intermediaries were identified and they have modified the penicillinic structure, which is the moiety responsible for the antimicrobial activity. Additionally, the possible oxacillin sonodegradation mechanism was proposed based on the evolution of the by-products and their chemical structure. Furthermore, the high-frequency ultrasound action over 120 min readily removed oxacillin and eliminated its antimicrobial activity. However, the pollutant was not mineralized even after a long period of ultrasonic irradiation (360 min). Interestingly, the previously sonicated water containing oxacillin and both additives was completely mineralized using non-adapted microorganisms from a municipal wastewater treatment plant. These results show that the sonochemical treatment transformed the initial pollutant into substances that are biotreatable with a typical aerobic biological system.     

The sonochemical decolourisation of textile azo dye Orange II: Effects of Fenton type reagents and UV light

The removal of Orange II (O-II) from aqueous solution under irradiation at 850 kHz has been studied. The effects of both homogeneous (with FeSO₄/H₂O₂)_, and heterogeneous (Fe containing ZSM-5 zeolite/H₂O₂) Fenton type reagents are reported together with the effect of UV irradiation in combination with ultrasound both alone and with homogeneous Fenton-type reagent.Degrees of decolourisation of 6.5% and 28.9% were observed using UV radiation and ultrasound, respectively, whereas under the simultaneous irradiation of ultrasound and UV light, the decolourisation degree reached 47.8%, indicating a synergetic effect of ultrasound and UV light. The decolourisation was increased with the addition of Fenton’s reagent with an optimal Fenton molar reagent ratio, Fe²⁺:H₂O₂ of 1:50. In the combined process of ultrasound and UV light with the homogeneous Fenton system 80.8% decolourisation could be achieved after 2 h indicating that UV improves this type of Orange II degradation. The degree of decolourisation obtained using the heterogeneous sono-Fenton system (Fe containing ZSM-5 zeolite catalysts + H₂O₂ + ultrasound) were consistently lower than the traditional homogeneous ultrasound Fenton system. This can be attributed to the greater difficulty of the reaction between Fe ions and hydrogen peroxide.In all cases the Orange II ultrasonic decolourisation was found to follow first order kinetics.     

Optimization of hydrostatic pressure at varied sonication conditions – power density,intensity, very low frequency – for isothermal ultrasonic sludge treatment

This work aims at investigating for the first time the key sonication (US) parameters: power density (D_US), intensity (I_US), and frequency (F_S) – down to audible range, under varied hydrostatic pressure (P_h) and low temperature isothermal conditions (to avoid any thermal effect).The selected application was activated sludge disintegration, a major industrial US process. For a rational approach all comparisons were made at same specific energy input (ES, US energy per solid weight) which is also the relevant economic criterion.The decoupling of power density and intensity was obtained by either changing the sludge volume or most often by changing probe diameter, all other characteristics being unchanged. Comprehensive results were obtained by varying the hydrostatic pressure at given power density and intensity. In all cases marked maxima of sludge disintegration appeared at optimum pressures, which values increased at increasing power intensity and density. Such optimum was expected due to opposite effects of increasing hydrostatic pressure: higher cavitation threshold then smaller and fewer bubbles, but higher temperature and pressure at the end of collapse.In addition the first attempt to lower US frequency down to audible range was very successful: at any operation condition (D_US, I_US, P_h, sludge concentration and type) higher sludge disintegration was obtained at 12 kHz than at 20 kHz. The same values of optimum pressure were observed at 12 and 20 kHz.At same energy consumption the best conditions – obtained at 12 kHz, maximum power density 720 W/L and 3.25 bar – provided about 100% improvement with respect to usual conditions (1 bar, 20 kHz). Important energy savings and equipment size reduction may then be expected.     

Investigation of acoustic cavitation energy in a large-scale sonoreactor

Acoustic cavitation energy distributions were investigated for various frequencies such as 35, 72, 110 and 170 kHz in a large-scale sonoreactor. The energy analyses were conducted in three-dimensions and the highest and most stable cavitation energy distribution was obtained not in 35 kHz but in 72 kHz. However, the half-cavitation-energy distance was larger in the case of 35 kHz ultrasound than in the case of 72 kHz, demonstrating that cavitation energy for one cycle was higher for a lower frequency. This discrepancy was due to the large surface area of the cavitation-energy-meter probe. In addition, 110 and 170 kHz ultrasound showed a very low and poor cavitation energy distribution. Therefore larger input power was required to optimize the use of higher frequency ultrasound in the sonoreactor with long-irradiation distance. The relationship between cavitation energy and sonochemical efficiency using potassium iodide (KI) dosimetry was best fitted quadratically. From 7.77 × 10^?10 to 4.42 × 10^?9 mol/J of sonochemical efficiency was evaluated for the cavitation energy from 31.76 to 103. 67 W. In addition, the cavitation energy attenuation was estimated under the assumption that cavitation energy measured in this study would be equivalent to sound intensity, resulting in 0.10, 0.18 and 2.44 m^?1 of the attenuation coefficient (α) for 35, 72 and 110 kHz, respectively. Furthermore, α/(frequency)² was not constant, as some previous studies have suggested.     

Ultrasound-induced inactivation of gram-negative and gram-positive bacteria in secondary treated municipal wastewater

The effect of 24 kHz, high energy ultrasound in the presence and absence of titanium dioxide particles on the destruction of different bacteria groups was studied. Applying a total of 1500 W/L for 60 min (this corresponds to 5400 kJ/L specific nominal energy), the mean destruction of gram-negative bacteria such as total coliforms, faecal coliforms and Pseudomonas spp. was 99.5%, 99.2% and 99.7%, respectively. More recalcitrant to sonolytic inactivation were the gram-positive bacteria Clostridium perfringens and faecal streptococci with a mean removal of 66% and 84%, respectively. The presence of 5 g/L TiO₂ generally enhanced the destruction of gram-negative bacteria, yielding three to five logs reduction. On the other hand, the relatively weak sonochemical inactivation of gram-positive bacteria was only slightly affected by the presence of solid particles. Inactivation was found to follow first-order kinetics regarding bacteria population and was not affected significantly by the wastewater quality. Ultrasound irradiation at 4000 kJ/L specific nominal energy and in the presence of 5 g/L TiO₂ achieved less than 10³ CFU/100 mL total coliforms, thus meeting USEPA quality standards for wastewater reuse.     

A phenomenological investigation into the opposing effects of fluid flow on sonochemical activity at different frequency and power settings. 2. Fluid circulation at high frequencies

Sonochemical activity is dependent on flow patterns within the reactor and either no affect or a decrease in activity was observed at 376, 995, and 1179 kHz from overhead stirring. The interaction of fluid flow with ultrasound was further investigated in this study with circulatory flow. The effect of fluid circulation on radical production was investigated at two circulation speeds, with and without surface stabilisation. The sonochemical activity was determined by the yield of hydrogen peroxide, measured by iodide dosimetry. The sonochemically active region was pictured using sonochemiluminescence imaging and the flow fields were visualised with dyed flow videos. At 376 and 995 kHz, an increase in sonochemical activity was observed with the slower flow rate; however at 1179 kHz, the sonochemical activity was either not affected or decreased. The observed changes in sonochemical activity were attributed to an increase in asymmetry of the bubble collapse brought about by fluid motion.     

Single,simultaneous and sequential applications of ultrasonic frequencies for the elimination of ibuprofen in water

The study is about the assessment of single and multi-frequency operations for the overall degradation of a widely consumed analgesic pharmaceutical-ibuprofen (IBP). The selected frequencies were in the range of 20–1130 kHz emissions coming from probes, baths and piezo-electric transducers attached to plate-type devices. Multi-frequency operations were applied either simultaneously as “duals”, or sequentially at fixed time intervals; and the total reaction time in all operations was 30-min. The work also covers evaluation of the effect of zero-valent iron (ZVI) on the efficiency of the degradation process and the performance of the reaction systems. It was found that low-frequency probe type devices especially at 20 kHz were ineffective when applied singly and without ZVI, and relatively more effective in combined-frequency operations in the presence of ZVI. The power efficiencies of the reactors and/or reaction systems showed that 20-kHz probe was considerably more energy intensive than all others, and was therefore not used in multi-frequency operations. The most efficient reactor in terms of power consumption was the bath (200 kHz), which however provided insufficient mineralization of the test chemical. The highest percentage of TOC decay (37%) was obtained in a dual-frequency operation (40/572 kHz) with ZVI, in which the energy consumption was neither low nor exceptionally too high. A sequential operation (40 + 200 kHz) in that respect was more efficient, because it required much less energy for a similar TOC decay performance (30%). In general, the degradation of IBP increased with increased power consumption, which in turn reduced the sonochemical yield. The study also showed that advanced Fenton reactions with ZVI were faster in the presence of ultrasound, and the metal was very effective in improving the performance of low-frequency operations.     

Advanced oxidation processes (AOPs) involving ultrasound for waste water treatment: A review with emphasis on cost estimation

Two things are needed for any technology to be suitable for use in the industry, viz. 1. Technical feasibility and 2. Economical feasibility. The use of ultrasound for waste water treatment has been shown to be technically feasible by numerous reports in the literature over the years. But there are hardly any exhaustive reports which address the issue of economical feasibility of the use of ultrasound for waste water treatment on industrial scale.Hence an attempt was made to estimate the cost for the waste water treatment using ultrasound. The costs have been calculated for 1000 L/min capacity treatment plant. The costs were calculated based upon the rate constants for pollutant degradation. The pollutants considered were phenol, trichloroethylene (TCE) and reactive azo dyes. Time required for ninety percent degradation of pollutant was taken as the residence time. The amount of energy required to achieve the target degradation was calculated from the energy density (watt/ml) used in the treatability study. The cost of treatment was calculated by considering capital cost and operating cost involved for the waste water treatment. Quotations were invited from vendors to ascertain the capital cost of equipments involved and operating costs were calculated based on annual energy usage. The cost was expressed in dollars per 1000 gallons of waste water treated. These treatment costs were compared with other established Advanced Oxidation Process (AOP) technologies. The cost of waste water treatment for phenol was in the range of $89 per 1000 gallons for UV/US/O₃ to $15,536 per 1000 gallons for US alone. These costs for TCE were in the range of $25 per 1000 gallons to $91 for US + UV treatment and US alone, respectively. The cost of waste water treatment for reactive azo dyes was in the range of $65 per 1000 gallon for US + UV + H₂O₂ to $14,203 per 1000 gallon for US alone.This study should help in quantifying the economics of waste water treatment using ultrasound on industrial scale. We strongly believe that this study will immensely help the researchers working in the area of applications of ultrasound for waste water treatment in terms of where the technology stands today as compared to other available commercial AOP technologies. This will also help them think for different ways to improve the efficiency of using ultrasound or search for other ways of generating cavitation which may be more efficient and help reduce the cost of treatment in future.     

Sonochemical degradation of ethyl paraben in environmental samples: Statistically important parameters determining kinetics,by-products and pathways

The sonochemical degradation of ethyl paraben (EP), a representative of the parabens family, was investigated. Experiments were conducted at constant ultrasound frequency of 20 kHz and liquid bulk temperature of 30 °C in the following range of experimental conditions: EP concentration 250–1250 μg/L, ultrasound (US) density 20–60 W/L, reaction time up to 120 min, initial pH 3–8 and sodium persulfate 0–100 mg/L, either in ultrapure water or secondary treated wastewater.A factorial design methodology was adopted to elucidate the statistically important effects and their interactions and a full empirical model comprising seventeen terms was originally developed. Omitting several terms of lower significance, a reduced model that can reliably simulate the process was finally proposed; this includes EP concentration, reaction time, power density and initial pH, as well as the interactions (EP concentration) × (US density), (EP concentration) × (pH_o) and (EP concentration) × (time).Experiments at an increased EP concentration of 3.5 mg/L were also performed to identify degradation by-products. LC–TOF–MS analysis revealed that EP sonochemical degradation occurs through dealkylation of the ethyl chain to form methyl paraben, while successive hydroxylation of the aromatic ring yields 4-hydroxybenzoic, 2,4-dihydroxybenzoic and 3,4-dihydroxybenzoic acids. By-products are less toxic to bacterium V. fischeri than the parent compound.     

Ultrasonic pilot-scale reactor for enzymatic bleaching of cotton fabrics

The potential of ultrasound-assisted technology has been demonstrated by several laboratory scale studies. However, their successful industrial scaling-up is still a challenge due to the limited pilot and commercial sonochemical reactors. In this work, a pilot reactor for laccase-hydrogen peroxide cotton bleaching assisted by ultrasound was scaled-up. For this purpose, an existing dyeing machine was transformed and adapted by including piezoelectric ultrasonic devices. Laboratory experiments demonstrated that both low frequency, high power (22 kHz, 2100 W) and high frequency, low power ultrasounds (850 kHz, 400 W) were required to achieve satisfactory results. Standard half (4 g/L H₂O₂ at 90 °C for 60 min) and optical (8 g/L H₂O₂ at 103 °C for 40 min) cotton bleaching processes were used as references. Two sequential stages were established for cotton bleaching: (1) laccase pretreatment assisted by high frequency ultrasound (850 kHz, 400 W) and (2) bleaching using high power ultrasound (22 kHz, 2100 W). When compared with conventional methods, combined laccase-hydrogen peroxide cotton bleaching with ultrasound energy improved the whitening effectiveness. Subsequently, less energy (temperature) and chemicals (hydrogen peroxide) were needed for cotton bleaching thus resulting in costs reduction. This technology allowed the combination of enzyme and hydrogen peroxide treatment in a continuous process. The developed pilot-scale reactor offers an enhancement of the cotton bleaching process with lower environmental impact as well as a better performance of further finishing operations.     

Degradation of 4-chloro 2-aminophenol using combined strategies based on ultrasound,photolysis and ozone

The present work investigates the degradation of 4-chloro 2-aminophenol (4C2AP), a highly toxic organic compound, using ultrasonic reactors and combination of ultrasound with photolysis and ozonation for the first time. Two types of ultrasonic reactors viz. ultrasonic horn and ultrasonic bath operating at frequency of 20 kHz and 36 kHz respectively have been used in the work. The effect of initial pH, temperature and power dissipation of the ultrasonic horn on the degradation rate has been investigated. The established optimum parameters of initial pH as 6 (natural pH of the aqueous solution) and temperature as 30 ± 2 °C were then used in the degradation studies using the combined approaches. Kinetic study revealed that degradation of 4C2AP followed first order kinetics for all the treatment approaches investigated in the present work. It has been established that US + UV + O₃ combined process was the most promising method giving maximum degradation of 4C2AP in both ultrasonic horn (complete removal) and bath (89.9%) with synergistic index as 1.98 and 1.29 respectively. The cavitational yield of ultrasonic bath was found to be eighteen times higher as compared to ultrasonic horn implying that configurations with higher overall areas of transducers would be better selection for large scale treatment. Overall, the work has clearly demonstrated that combined approaches could synergistically remove the toxic pollutant (4C2AP).     

Multibubble sonoluminescence as a tool to study the mechanism of formic acid sonolysis

Sonoluminescence spectra collected from 0.1 to 3.0 M aqueous solutions of formic acid sparged with argon show the OH(A²Σ⁺−X²Π_i) and C₂(d³Π_g → a³Π_u) emission bands and a broad continuum typical for multibubble sonoluminescence. The overall intensity of sonoluminescence and the sonochemical yield of HCOOH degradation vary in opposite directions: the sonoluminescence is quenched while the sonochemical yield increases with HCOOH concentration. By contrast, the concentration of formic acid has a relatively small effect on the intensity of C₂ Swan band. It is concluded that C₂ emission originates from CO produced by HCOOH degradation rather than from direct sonochemical degradation of HCOOH. The intensity of C₂ band is much stronger at high ultrasonic frequency compared to 20 kHz ultrasound which is in line with higher yields of CO at high frequency. Another product of HCOOH sonolysis, carbon dioxide, strongly quenches sonoluminescence, most probably via collisional non-radiative mechanism.     

Intensification of degradation of methomyl (carbamate group pesticide) by using the combination of ultrasonic cavitation and process intensifying additives

In the present work, the degradation of methomyl has been carried out by using the ultrasound cavitation (US) and its combination with H₂O₂, Fenton and photo-Fenton process. The study of effect of operating pH and ultrasound power density has indicated that maximum extent of degradation of 28.57% could be obtained at the optimal pH of 2.5 and power density of 0.155 W/mL. Application of US in combination with H₂O₂, Fenton and photo-Fenton process has further accelerated the rate of degradation of methomyl with complete degradation of methomyl in 27 min, 18 min and 9 min respectively. Mineralization study has proved that a combination of US and photo-Fenton process is the most effective process with maximum extent of mineralization of 78.8%. Comparison of energy efficiency and cost effectiveness of various processes has indicated that the electrical cost of 79892.34 Rs./m³ for ultrasonic degradation of methomyl has drastically reduced to 2277.00 Rs./m³, 1518.00 Rs./m³ and 807.58 Rs./m³ by using US in combination with H₂O₂, Fenton and photo-Fenton process respectively. The cost analysis has also indicated that the combination of US and photo-Fenton process is the most energy efficient and cost effective process.     

Molecular weight distribution,rheological property and structural changes of sodium alginate induced by ultrasound

In this study, the effects of ultrasound with different ultrasonic frequencies on the properties of sodium alginate (ALG) were investigated, which were characterized by the means of the multi-angle laser light scattering photometer analysis (GPC-MALLS), rheological analysis, circular dichroism (CD) spectrometer and scanning electron microscope (SEM). It showed that the molecular weight (M_w) and molecular number (M_n) of the untreated ALG was 1.927 × 10⁵ g/mol and 4.852 × 10⁴ g/mol, respectively. The M_w of the ultrasound treated ALG was gradually increased from 3.50 × 10⁴ g/mol to 7.34 × 10⁴ g/mol while the M_n of ALG was increased and then decreased with the increase of the ultrasonic frequency. The maximum value of M_n was 9.988 × 10⁴ g/mol when the ALG was treated by ultrasound at 40 kHz. It indicated that ultrasound could induce ALG degradation and rearrangement. The number of the large molecules and small molecules of ALG was changed by ultrasound. The value of d_n/d_c suggested that the ultrasound could enhance the stability of ALG. Furthermore, it was found that ALG treated by ultrasound at 50 kHz tended to be closer to a Newtonian behavior, while the untreated and treated ALG solutions exhibited pseudoplastic behaviours. Moreover, CD spectra demonstrated that ultrasound could be used to improve the strength of the gel by changing the ratio of M/G, which showed that the minimum ratio of M/G of ALG treated at 135 kHz was 1.34. The gel-forming capacity of ALG was correlated with the content of G-blocks. It suggested that ALG treated by ultrasound at 135 kHz was stiffer in the process of forming gels. The morphology results indicated that ultrasound treatment of ALG at 135 kHz increased its hydrophobic interaction and interfacial activity. This study is important to explore the effect of ultrasound on ALG in improving the physical properties of ALG as food additives, enzyme and drug carriers.     

Ultrasound-assisted mineralization of organic contaminants using a recyclable LaFeO3 and Fe3+/persulfate Fenton-like system

A recyclable heterogeneous catalyst has been successfully developed for application in a Fenton-type advanced oxidation process without adding external H₂O₂. LaFeO₃ was prepared from Fe(NO₃)₃·9H₂O and La(NO₃)·6H₂O by a simple sol-gel method and its catalytic efficiency was evaluated for mineralization of 4-chlorophenol using a Fenton-like process. The mineralization process was carried out under ultrasonication in presence of heterogeneous LaFeO₃ catalyst with H₂O₂ that was produced during ultrasonication. The mineralization process was monitored through total organic carbon (TOC) analysis. Very importantly, utmost 5-fold synergism was evidenced by the ultrasound mediated LaFeO₃-catalyzed system. Besides, more than twofold synergism was observed by combining the ultrasound assisted LaFeO₃ catalytic process and potassium persulfate (KPS) assisted advanced oxidation process. It is worth to mention that complete mineralization (∼96%) of 4-chlorophenol (initial concentration of 1.25 × 10⁻⁴ M) was observed within 1 h in the presence of LaFeO₃ (0.5 g L⁻¹) and KPS (1.0 mmol) under ultrasonication (40 kHz). Even after four cycles, the activity of LaFeO₃ remained intact which proved its recyclability. Extremely reusable heterogeneous LaFeO₃ catalyst makes the system more interesting from both economic and environmental points of view.