A novel one-step electron beam irradiation method for synthesis of Ag/Cu2O nanocomposites

In this paper, a novel method for fabrication of silver/cuprous oxide (Ag/Cu₂O) nanocomposites is reported. The method involves the reduction of Ag⁺ and Cu²⁺ in the aqueous solution to Ag/Cu₂O without adding any reducing reagent under electron beam (EB) irradiation. Dye methyl orange is used as the pollutant model to investigate the photocatalytic properties of these nanocomposites. The results reveal that they have higher photocatalytic efficiencies than that of Cu₂O under visible light. These visible light-sensitive catalysts may have potential application in the field of environmental remediation.     

Synthesis of titania/carbon nanocomposites by polymeric precursor method

Here we describe a single chemical route to obtain highly dispersed nanometric Ni particles embedded in titania/carbon matrixes (amorphous and crystalline). The synthesis of these nanocomposites is based on a polymeric precursor method. The metallic Ni nanoparticles (1-15 nm) were obtained in a single process. We also present the results of photocatalytic experiments involving a series of nanocrystalline composites based on TiO₂/carbon with embedded Ni nanoparticles as nanocatalysts for rhodamine 6G degradation in aqueous solution and investigate the effects of the structure and properties of the nanocomposites on their photocatalytic applications. The effect of the different annealing treatments on the formation of TiO₂ nanophases (anatase and/or rutile), the size of Ni particles and the role of the residual carbon phase on the final solid are also described.     

Fabrication of anatase titania inverse opal films using polystyrene templates

High-performance titania inverse opal films have been derived from a sol–gel procedure using polystyrene colloidal crystals as templates. By carefully controlling the synthetic procedures, the titania inverse opal films display a uniform color over centimeter dimensions. Scanning electron microscopy is employed to characterize the qualities of the titania inverse opal films. Electron diffraction pattern shows a polycrystalline anatase structure of TiO₂.     

Photostabilization of dye on anatase titania nanoparticles by polymer capping

Nanoparticles of titanium dioxide (TiO₂) were prepared by the sol-gel method and characterized by XRD, TEM, FTIR and UV-Visible absorption spectroscopy for their structure, morphology and particle size. Organization, stabilization of the nanoparticles of TiO₂ from further growth, and partially inhibiting the photodegradation was achieved by capping with polymers. Photodegradation of dye on TiO₂ nanoparticles encapsulated in different polymers has been studied by diffused reflectance UV spectroscopy. The role of the polymer on the photodegradation of TiO₂ has been compared and explained.     

Synthesis and characterization of hydroxyapatite/titania nanocomposites using in situ precipitation technique

Hydroxyapatite/titania nanocomposites were successfully synthesized by in situ precipitation of precursor matters from hydroxyapatite and titania at 70 °C with different hydroxyapatite/titania ratios. X-ray diffraction, Fourier transform infrared spectroscopy, Brunauer–Emmett–Teller surface, scanning and transmission electron microscopes were employed to characterize the prepared nanocomposite powders. X-ray diffraction results indicated that hydroxyapatite and anatase (TiO₂) were the major crystalline phases. By increasing the amount of titania nano-particles, Fourier transform infrared spectroscopy revealed that (PO₄)³⁻ bands at 567, 1033 cm⁻¹ decreased. Brunauer–Emmett–Teller surface results also showed a reduction in surface areas of nanocomposites. Transmission electron microscope observations revealed that the aspect ratio of hydroxyapatite/TiO₂ nanocrystals increased by increasing TiO₂ proportion in nanocomposites. The observed nanorod crystals tended to thin, elongated and plate-like in shape.     

Continuous one-step synthesis of N-doped titania under supercritical and subcritical water conditions for photocatalytic reaction under visible light

N-doped titania was prepared continuously by one-step synthetic method under supercritical and subcritical water conditions using titanium(IV)tetraisopropoxide (TTIP) and nitric acid as a titania precursor and nitrogen source, respectively. The synthesized N-doped titania particles were characterized by XRD, N₂-adsorption, TEM, XPS, UV-vis diffuse reflectance spectroscopy. N-doped titania was successfully synthesized and its crystalline structure was homogenous anatase phase with high surface area. The absorption edge of synthesized N-doped titania shifted into the visible light region compared with commercial titania P25. All synthesized N-doped titania have higher photocatalytic activity than P25 under visible light irradiation. The photocatalytic activity of N-doped titania synthesized under supercritical water condition was the highest for the degradation of methyl orange under visible light due to the larger crystallite size compared with the N-doped titania synthesized under subcritical water condition.     

Photochemical synthesis of ZnO/Ag nanocomposites

Composite ZnO/Ag nanoparticles have been formed via the photocatalytic reduction of silver nitrate over the ZnO nanocrystals, their optical, electrophysical and photochemical properties have been investigated. Mie theory has been applied to analyze the structure of the absorption spectra of ZnO/Ag nanocomposite. The irradiation effects upon the optical properties of ZnO/Ag nanostructure have been investigated. It has been found that the irradiation of ZnO/Ag nanoparticles results in electrons accumulation by both the semiconductor and the metallic components of the nanocomposite. It has been found that silver nitrate can be photochemically deposited onto the surface of ZnO nanoparticles under the illumination with the visible light in the presence of the sensitizer – methylene blue. Kinetics of the sensitized Ag(I) photoredution has been studied. It has been concluded that the key stage of this process is the electron injection from singlet-excited methylene blue molecule into ZnO nanoparticle.     

Maintaining particle size in the transformation of anatase to rutile titania nanostructures

We study the temperature-dependent transformation of two distinctly synthesized TiO₂ nanoparticles from the anatase to the rutile phase. These studies are carried out over the temperature range extending from room temperature to an excess of 800 °C where the anatase to rutile conversion is found to occur. Results obtained for both a sol-gel-generated nanocolloid (3-20 nm) and a sol-gel-generated micelle nanostructure (∼40 nm) are evaluated. While the TiO₂ nanocolloid structures aggregate to form larger crystallites as a function of increasing temperature with sizes comparable to the sol-gel-generated micelle structures, the resulting anatase crystallites, which are of a diameter 40-50 nm, appear to transform to comparable or slightly smaller rutile structures at 800 °C. This is in contrast to the transformation to larger rutile structures, observed for larger anatase particles. The importance of kinetic effects is considered as it enhances the rate of anatase to rutile conversion. These characteristics are established using a combination of Raman spectroscopic, X-ray diffraction, and scanning electron microscopy. The relative playoffs of the Raman and X-ray diffraction techniques are considered as they are used for the analysis of particles at the nanoscale, especially when phase transformations are evaluated.     

Fabrication and characterization of iron oxide nanoparticles filled polypyrrole nanocomposites

The effect of iron oxide nanoparticle addition on the physicochemical properties of the polypyrrole (PPy) was investigated. In the presence of iron oxide nanoparticles, PPy was observed in the form of discrete nanoparticles, not the usual network structure. PPy showed crystalline structure in the nanocomposites and pure PPy formed without iron oxide nanoparticles. PPy exhibited amorphous structure and nanoparticles were completely etched away in the nanocomposites formed with mechanical stirring over a 7-h reaction. The thermal stability of the PPy in the nanocomposites was enhanced under the thermo-gravimetric analysis (TGA). The electrical conductivity of the nanocomposites increased greatly upon the initial addition (20 wt%) of iron oxide nanoparticles. However, a higher nanoparticle loading (50 wt%) decreased the conductivity as a result of the dominance of the insulating iron oxide nanoparticles. Standard four-probe measurements indicated a three-dimensional variable-range-hopping conductivity mechanism. The magnetic properties of the fabricated nanocomposites were dependent on the particle loading. Ultrasonic stirring was observed to have a favorable effect on the protection of iron oxide nanoparticles from dissolution in acid. A tight polymer structure surrounds the magnetic nanoparticles, as compared to a complete loss of the magnetic iron oxide nanoparticles during conventional mechanical stirring for the micron-sized iron oxide particles filled PPy composite fabrication.     

Quantitative study of F center in high-surface-area anatase titania nanoparticles prepared by MOCVD

The concentration of F center in high-surface-area anatase titania nanoparticles prepared by MOCVD are studied with electron paramagnetic resonance measurements at different time and different temperatures. The results show that the kinetics of F center is dominated by surface process rather than bulk process. With increasing temperature, two temperature dependent regions for the concentration of F center can be clearly identified. The starting temperature and activation energy of the surface process are determined to be 357.4 K and 0.085 eV, respectively. The reaction of F center with oxygen is of zero order and the concentration of F center can be well described by

     

Continuous extrusion of long-chain-branched polypropylene/clay nanocomposites with high-intensity ultrasonic waves

A continuous extrusion processing method with high-intensity ultrasonic waves was developed to make a long-chain-branched polypropylene/clay nanocomposite. A multifunctional agent was used to enhance and control the recombination reaction during sonification. The ultrasonic waves induced chain scission and created reactive macromolecules of polypropylene successfully in the continuous extrusion process without any peroxide. The rheological property measurements confirmed that the modified polypropylene had a nonlinear branched structure. Another purpose of dosing high-intensity ultrasonic waves was to enhance nano-scale dispersion during melt mixing of polypropylene and clay. The sonication during processing led to enhanced breakup of the clay agglomerates and reduction in size of the dispersed phase. The observed clay was in the intercalated state without any compatibilizer. The fine dispersion of clay was also quite effective in reducing the end pressure losses in capillary dies and, as a result, significantly improved the extrudate appearance during processing.     

Ionic liquid-assisted synthesis of carbon nanotube/platinum nanocomposites

A novel solution-enhanced dispersion by supercritical CO₂ (SEDS) was employed to prepare silk fibroin (SF) nanoparticles. The resulting SF nanoparticles exhibited a good spherical shape, a smooth surface, and a narrow particle size distribution with a mean particle diameter of about 50?nm. The results of X-ray powder diffraction, thermo gravimetry-differential scanning calorimetry, and Fourier transform infrared spectroscopy analysis of the SF nanoparticles before and after ethanol treatment indicated conformation transition of SF nanoparticles from random coil to ??-sheet form and thus water insolubility. The MTS assay also suggested that the SF nanoparticles after ethanol treatment imposed no toxicity. A non-steroidal anti-inflammatory drug, indomethacin (IDMC), was chosen as the model drug and was encapsulated in SF nanoparticles by the SEDS process. The resulting IDMC?CSF nanoparticles, after ethanol treatment, possessed a theoretical average drug load of 20%, an actual drug load of 2.05%, and an encapsulation efficiency of 10.23%. In vitro IDMC release from the IDMC?CSF nanoparticles after ethanol treatment showed a significantly sustained release over 2?days. These studies of SF nanoparticles indicated the suitability of the SF nanoparticles prepared by the SEDS process as a biocompatible carrier to deliver drugs and also the feasibility of using the SEDS process to reach the goal of co-precipitation of drug and SF as composite nanoparticles for controlled drug delivery.     

Eco-efficient ultrasonic responsive synthesis of pyrimidines/pyridines

Using ultrasound irradiation, two simple one-pot multicomponent methods are described for syntheses of highly functionalized pyrimidine/pyridine derivatives in excellent yields in the presence of NaOH at room temperature. While one route involved aromatic aldehyde, thiourea and acetoacetanilide, the other employed aromatic aldehyde, malononitrile and benzyl mercaptane or EtOH. These approaches afford several advantages over former and contemporary reaction methodologies in terms of operational simplicity, simple work-up procedure, higher yield, short reaction time and environment friendly protocols.     

Preparation of F-doped titania nanoparticles with a highly thermally stable anatase phase by alcoholysis of TiCl4

Pure anatase is a metastable phase and inclined to (transform) be transformed into rutile structure under heating over than 500 °C, which limits its suitability for high-temperature applications. Hitherto much research efforts have been made to increase the stability temperature of anatase structure. However, metallic doping usually introduced metallic oxides into titania at high temperature, and many nonmetallic doping are not competent for increasing the stability temperature of anatase structure up to 900 °C. In this study, F-doped anatase TiO₂ nanoparticles were conveniently prepared via the alcoholysis of TiCl₄ and the as-prepared product shows very high stability temperature up to 1000 °C before being transformed into rutile structure phase. On the basis of XPS results of F-doped titania annealed at different temperature, it is learned that the F atoms were anchored on the crystal planes of anatase in favor of decreasing the energy faces of anatase and stabilizing the anatase structure till annealed at 1300 °C all the anatase were transformed into rutile phase.     

Structural role of polyethylene glycol in the formation of anatase nanocrystalline titania at low temperature

Anatase nanocrystalline TiO₂ thin films were obtained by a sol–gel dip‐coating method, in which the nanocrystallization is effected by a simple hot water treatment of the deposited films at temperatures below 90 °C under atmospheric pressure for 1 h. The dip‐coating sol was prepared by reacting titanium tetra‐n‐butoxide [Ti(OⁿBu)₄] with polyethylene glycol (PEG) in ethanol. Films obtained from a sol that do not contain PEG show no sign of crystallization, demonstrating the importance of PEG in the crystallization process. Raman studies of reaction dynamics show that PEG undergoes a nucleophilic substitution reaction replacing butoxy groups in Ti(OⁿBu)₄. Stoichiometric reactions of Ti(OⁿBu)₄ with PEG in polar and nonpolar solvents were performed, and they yielded different titanium–PEG hybrid polymers, which were isolated and characterized by various spectroscopic techniques such as IR, Raman, solid‐state NMR and MALDI‐TOF‐MS. NMR studies evidenced the location and the way in which PEG is bonded with titanium atoms in the titanium–PEG hybrid polymers. On the basis of these studies, we have proposed structures for these polymers. It is demonstrated that the structure of the obtained polymers plays an important role in the formation of anatase TiO₂ nanoparticles in hot water at temperatures below 90 °C under atmospheric pressure. Copyright © 2009 John Wiley & Sons, Ltd.     

Synthesis,characterization, conductivity and sensor application study of polypyrrole/silver doped nickel oxide nanocomposites

Conducting polymer composites of polypyrrole (PPy) and silver doped nickel oxide (Ag-NiO) nanocomposites were synthesised by in situ polymerisation of pyrrole with different contents of Ag-NiO nanoparticles. The formation of nanocomposites were studied by Fourier transform infrared (FTIR) and UV–vis spectroscopy, field emission scanning electron microscopy (FE-SEM), X-ray diffraction (XRD), thermogravimetric analysis (TGA), differential scanning calorimetry (DSC) and AC and DC conductivity measurements. The sensitivity of ammonia gas through the nanocomposite was analysed with respect to different contents of nanoparticles. Spectroscopic studies showed the shift in the absorption bands of polymer nanocomposite than that of pure PPy indicating the strong interaction between the nanoparticles and polymer chain. FESEM revealed the uniform dispersion of nanoparticles with spherically shaped metal oxide particles in PPy matrix. The XRD pattern indicated a decrease in amorphous domain of PPy with increase in loading of nanoparticles. The higher thermal stability and glass transition temperature of polymer nanocomposites than that of pure PPy were revealed from the TGA and DSC respectively. The dielectric properties, DC and AC conductivity of nanocomposites were much higher than PPy and these electrical properties increases with the loading of nanoparticles. The nanocomposites showed an enhancement in sensitivity towards ammonia gas detection than PPy.     

Physical properties,thermal stability,and glass transition temperature of multi-walled carbon nanotube/polypyrrole nanocomposites

Polypyrrole (PPy) was synthesized and doped with 1, 2, 4, and 8?wt.% of functionalized multi-wall carbon nanotubes (MWCNTs) by in situ polymerization. TGA/DTA analysis of nanocomposites revealed an increase in thermal stability by increasing the CNTs wt.%. Measurement of electrical resistivity showed a reduction in the resistivity of the composites at all temperatures. The glass transition temperature (T_g) of the samples was measured using electrical resistivity measurements and showed that by increasing the amount of functionalized MWCNTs in PPy, its T_g was increased. Temperature dependence of resistivity of pressed pure PPy showed that by increasing the pelletization pressure, the T_g increased. Also the hardness of nanocomposites was increased by increasing the MWCNTs wt.%.     

Solvothermal synthesis and characterization of sandwich-like graphene/ZnO nanocomposites

Graphene-based nanocomposites are emerging as a new class of materials that hold promise for many applications. In this paper, we present a general approach for the preparation of sandwich-like graphene/ZnO nanocomposites in ethylene glycol (EG) medium using graphene oxide as a precursor of graphene and zinc acetylacetonate as a single-source precursor of zinc oxide. The samples were characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM), Fourier transform infrared (FT-IR) spectroscopy, ultraviolet-visible (UV-vis) spectroscopy and thermogravimetry analysis. It was shown that the as-formed ZnO nanoparticles with a diameter of about 5 nm were densely and uniformly deposited on both surfaces of the graphene sheets to form a sandwich-like composite structure and as a result, the restacking of the as-reduced graphene sheets was effectively prevented. The ZnO-coated graphene nanocomposites can be expected to effectively improve the photocatalysis and sensing properties of ZnO and would be promising for practical applications in future nanotechnology.