Synthesis and thermal properties of emulsion terpolymers of <Emphasis Type="Italic">N</Emphasis>-p-tolylmaleimide/butadiene–styrene latex/AN/St

Heat-resistance ABS resin was synthesized by emulsion polymerization of N-p-tolylmaleimide (N-PTMI), butadiene–styrene latex (SB), AN and St. Thermal properties of terpolymers with different monomer ratio were characterized by DSC and TG. The molecular mass and molecular mass distribution of terpolymers were determined with GPC. The results shown the heat-resistance of terpolymers, the glass transition temperature and the decomposition temperature were increased with the increasing of N-PTMI feed content. With the increasing of AN feed content, the glass transition temperature of terpolymers decrease while the decomposition temperature increase. The glass transition temperature of terpolymers decrease with SB feed content and the product shows plastic properties when SB feed content is lower than 45 (m/m %).     

Synthesis of Water-Soluble Chemodegradable N-Vinylpyrrolidone-Crotonic Acid-2-Hydroxyethyl Methacrylate Terpolymers Containing Interchain Urethane Cross-Links,as Carriers of Substances with Antimicrobial Activity

Water-soluble branched N-vinylpyrrolidone-crotonic acid-2-hydroxyethyl methacrylate terpolymers containing labile interchain urethane cross-links were prepared. Their molecular-weight characteristics were determined, and the hydrolytic stability under conditions close to those in a living body was evaluated. Polymeric salts of gentamicin were prepared from linear and branched chemodegradable N-vinylpyrrolidone terpolymers.     

Stimuli‐responsive ampholytic terpolymers of N‐acryloyl‐valine,acrylamide, and (3‐acrylamidopropyl)trimethylammonium chloride: Synthesis,characterization, and solution properties

Low‐charge density ampholytic terpolymers composed of acrylamide (AM), (3‐acrylamidopropyl)trimethyl ammonium chloride (APTAC), and N‐acryloyl‐valine were prepared via free‐radical polymerization in 0.5 M NaCl to yield terpolymers with random charge distributions. Sodium formate (NaOOCH) was employed as a chain transfer agent during the polymerization to suppress gel effects and broadening of the molecular weight distribution (MWD). Terpolymer compositions were determined by ¹³C NMR spectroscopy. Terpolymer molecular weights (MWs) and polydispersity indices (PDIs) were obtained via size exclusion chromatography/multi‐angle laser light scattering (SEC‐MALLS). Intrinsic viscosity values determined from SEC‐MALLS data using the Flory–Fox relationship were compared with those determined by low‐shear dilute solution viscometry and found to be in good agreement. SEC‐MALLS experiments allowed examination of radius of gyration‐MW (R_g‐M) relationships and the Mark‐Houwink‐Sakurada intrinsic viscosity‐MW ([η]‐M) relationships for terpolymers. The R_g‐M and [η]‐M relationships indicated little or no excluded volume effects under SEC conditions indicating that the terpolymers were in near theta conditions in an aqueous buffer solution. Potentiometric titration experiments were performed in deionized (DI) water. These studies revealed that the apparent pK_a of the AMVALTAC terpolymers increases with increasing VAL content. The solution properties of low‐charge density ampholytic terpolymers have been studied as functions of solution pH, ionic strength, and polymer concentration. The charge‐balanced terpolymers exhibit polyampholyte behavior at pH values ≥ 6.5. As solution pH is decreased, these charge‐balanced terpolymers become increasingly cationic due to the protonation of the VAL repeat units. Charge‐imbalanced terpolymers generally exhibit polyelectrolyte behavior, although the effects of intramolecular electrostatic interactions (e.g., polyampholyte effects) on the hydrodynamic volume are evident at certain values of solution pH and salt concentration. The solution behavior of the terpolymers in the dilute regime correlates well with that predicted by various polyampholyte solution theories. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 3125–3139, 2006     

Composition dependence of nanophase‐separated structures formed by star‐shaped terpolymers of the A1.0B1.0CX type

Several hierarchical nanophase‐separated structures have been observed for a series of ABC star‐shaped terpolymers by transmission electron microscopy (TEM) and electron computerized tomography (3D‐TEM). The seven terpolymers synthesized are composed of polyisoprene (I), polystyrene (S), and poly(2‐vinylpyridine) (P), their volume fraction ratios of I:S:P are 1:1:X, where X equals 0.2, 0.4, 0.7, 1.2, 1.9, 3.0, and 4.9, respectively, and additional four samples were prepared by blending each two parent terpolymers. From morphological observation by TEM and tomography, a terpolymer with X of 0.2 shows lamellar structure with spheres at the interface, those with X ranging from 0.4 to 1.9 show cylindrical structures with two‐dimensional tiling, while those with X of 3.0 and 4.9 show hierarchical cylinders‐in‐lamella structure. Two the other terpolymer samples with X of 7.9 and 10 were produced by blending a P homopolymer with the terpolymer I_1.0S_1.0P_4.9, and they both exhibited columnar piled disk cylinders in P matrix. From the comparison of the present results with the predictions by the Monte–Carlo simulation, it was confirmed that the observed nanophase‐separated structures of the ISP star‐shaped terpolymers are mostly in good agreement with the prediction. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 2277–2283, 2007     

Polyampholyte terpolymers of amphoteric,amino acid‐based monomers with acrylamide and (3‐acrylamidopropyl)trimethyl ammonium chloride

Low‐charge‐density amphoteric copolymers and terpolymers composed of acrylamide, (3‐acrylamidopropyl)trimethyl ammonium chloride, and the amino acid derived monomers (e.g., N‐acryloyl valine, N‐acryloyl alanine, and N‐acryloyl aspartate) were prepared via free‐radical polymerization in aqueous media to yield terpolymers with random charge distributions and homogeneous compositions. Sodium formate (NaOOCH) was employed as a chain transfer agent during the polymerization to suppress gel effects and broadening of the molecular weight distribution. Terpolymer compositions were determined by ¹³C and ¹H NMR spectroscopy. Terpolymer molecular weights and polydispersity indices were obtained via size exclusion chromatography/multi‐angle laser light scattering, and hydrodynamic diameter values were obtained via dynamic light scattering. The solution properties of low‐charge‐density amphoteric copolymers and terpolymers have been studied as a function of solution pH, ionic strength, and polymer concentration. The low‐charge‐density terpolymers display excellent solubility in deionized (DI) water with no phase separation. The charge‐balanced terpolymers exhibit antipolyelectrolyte behavior at pH values ≥(6.5 ± 0.2). As solution pH is decreased, these charge‐balanced terpolymers become increasingly cationic because of the protonation of the anionic repeat units. Charge‐imbalanced terpolymers generally demonstrate polyelectrolyte behavior, although the effects of intramolecular electrostatic interactions (e.g., polyampholyte effects) on the hydrodynamic volume are evident at certain values of solution pH and salt concentration. The aqueous solution behavior (i.e., globule‐to‐coil transition at the isoelectric point in the presence of salt and globule elongation with increasing charge asymmetry) of the terpolymers in the dilute regime correlates well with that predicted by the polyampholyte solution theories of Dobrynin and Rubinstein as well as Kantor and Kardar. Examination of comonomer charge density, hydrogen‐bonding ability, and spacer group (e.g., the moiety separating the ionic group from the polymer chain) indicates that conformational restrictions of the amino acid comonomers result in increased chain stiffness and higher solution viscosities in DI water and brine solutions. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 4479–4493, 2006     

Synthesis and Characterization of Triblock Terpolymers with three Potentially Crystallisable Blocks: Polyethylene-b-poly(ethylene oxide)-b-poly(ε-caprolactone)

A first attempt was made to produce novel ABC triblock terpolymers with three potentially crystallisable blocks: polyethylene (PE), poly(ethylene oxide) (PEO), and poly(ε-caprolactone) (PCL). Polybutadiene-b-poly(ethylene oxide) diblock copolymers were synthesized by living anionic polymerization. Then, a non-catalyzed thermal polymerization of ε-caprolactone from the hydroxyl end group of the PB-b-PEO diblock precursors was performed. Finally, hydrogenation by Wilkinson catalyst produced PE-b-PEO-b-PCL triblock terpolymers. Side reactions were detected that lead to the formation of undesired PCL-b-PEO diblock copolymers, however, these impurities were successfully removed by purification. A range of triblock terpolymers with PCL and PEO minor components were prepared. Topological restrictions on the PEO middle block prevented this block from crystallizing while the complex crystallization behavior of the PE and PCL blocks was documented by DSC and WAXS measurements.     

Hydrophilic CO2‐based biodegradable polycarbonates: Synthesis and rapid thermo‐responsive behavior

Common CO₂‐based biodegradable polycarbonates like poly(propylene carbonate) or poly(cyclohexene carbonate) are generally hydrophobic, leading to slow biodegradation rate and poor cell adhesion, which limit their applications in the biomedical field. Here hydrophilic polycarbonates were prepared by one‐pot terpolymerization of CO₂, propylene oxide (PO), and 2‐((2‐(2‐(2‐methoxyethoxy)ethoxy)ethoxy)methyl)oxirane (ME₃MO) using binary Salen Co(III)‐Cl/PPNCl catalyst system. The resultant terpolymers showed one glass transition temperature (T_g), which decreased with the increase of ME₃MO units in the terpolymers (F_ME3MO). Water contact angles of the resultant terpolymers with F_ME3MO of 4.2?23.6% were 68?25°, while that of poly(propylene carbonate) was 90°, indicating that the terpolymers became hydrophlilic. Furthermore, the terpolymers with F_ME3MO more than 25.8% exhibited reversible and rapid thermo‐responsive property in water, and the lower critical solution temperature (LCST) was highly sensitive to F_ME3MO. In particular, aqueous solution of the terpolymer with F_ME3MO of 72.6% showed a LCST around 35.2 °C, close to body temperature, which was promising for biomedical applications, especially for in vivo applications. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 2834–2840.     

Water-soluble polymers. 71. pH responsive behavior of terpolymers of sodium acrylate,acrylamide, and the zwitterionic monomer 4-(2-acrylamido-2-methylpropanedimethylammonio)butanoate

Terpolymers of sodium acrylate (NaA), acrylamide (AM), and the zwitterionic monomer 4-(2-acrylamido-2-methylpropanedimethylammonio) butanoate (AMPDAB) were prepared by the free radical polymerization in 0.5M NaBr aqueous solution using potassium persulfate as the initiator. The feed ratio of AMPDAB : NaA : AM was varied from 5 : 5 : 90 to 40 : 40 : 20 mol %, with the total monomer concentration held constant at 0.45M. Terpolymer compositions were determined by ¹³C NMR. Molecular weights varied from 3.0 × 10⁵ to 9.7 × 10⁶ g/mol. All terpolymers were soluble in deionized water and salt solutions at all pH values. The dilute and semidilute solution behavior of the terpolymers was studied as a function of composition, pH, and added electrolytes. Polyelectrolyte behavior was observed for all terpolymers at pH 8.5, as evidenced by high viscosity values at low polymer concentrations and viscosity decrease in the presence of added electrolytes. The reduced viscosity as a function of decreasing pH exhibits a minimum as the terpolymer undergoes a polyanion/polyzwitterion/polycation transition. Comparison of the solution behavior of the terpolymers to terpolymers of 3-(2-acrylamido-2-methylpropane dimethylammonio)-1-propane sulfonate (AMPDAPS), AM, and NaA (AADAPS series) as well as copolymers of AMPDAB and AM (AMPDAB series) have been made. © 1997 John Wiley & Sons, Inc.     

pH‐Responsive ampholytic terpolymers of acrylamide,sodium 3‐acrylamido‐3‐methylbutanoate,and (3‐acrylamidopropyl)trimethylammonium chloride. I. Synthesis and characterization

Low-charge-density ampholytic terpolymers composed of acrylamide, sodium 3-acrylamido-3-methylbutanoate (NaAMB), and (3-acrylamidopropyl)trimethylammonium chloride were prepared via free-radical polymerization in 0.5 M NaCl to yield terpolymers with random charge distributions. NaOOCH was used as a chain-transfer agent during the polymerization to eliminate the effects of the monomer feed composition on the degree of polymerization (DP) and to suppress gel effects and broadening of the molecular weight distribution. The terpolymer compositions were obtained via ¹³C NMR spectroscopy, and the residual counterion content was determined via elemental analysis for Na⁺ and Cl⁻. The molecular weights (MWs) and polydispersity indices (PDIs) were determined via size exclusion chromatography/multi-angle laser light scattering (SEC–MALLS); the terpolymer MWs ranged from 1.3–1.6 × 10⁶ g/mol, corresponding to DPs of 1.6–1.9 × 10⁴ repeat units, with all terpolymers exhibiting PDIs of less than 2.0. Intrinsic viscosities determined from SEC–MALLS data and the Flory–Fox relationship were compared to intrinsic viscosities determined via low-shear dilute-solution viscometry and were found to agree rather well. Data from the SEC–MALLS analysis were used to analyze the radius of gyration/molecular weight (R_g–M) relationships and the Mark–Houwink–Sakurada intrinsic viscosity/molecular weight ([η]–M) relationships for the terpolymers. The R_g–M and [η]–M relationships revealed that most of the terpolymers exhibited little or no excluded volume effects under size exclusion chromatography conditions. Potentiometric titration of terpolymer solutions in deionized water showed that the apparent pK_a value of the poly[acrylamide-co-sodium 3-acrylamido-3-methylbutanoate-co-(3-acrylamidopropyl)trimethylammonium chloride] terpolymers increased with increasing NaAMB content in the terpolymers and increasing ratios of anionic monomer to cationic monomer at a constant terpolymer charge density. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 3236–3251, 2004     

Synthesis and characterization of a novel terpolymer based on L‐lactide,glycolide, and trimethylene carbonate for specific medical applications

The bioresorbable new terpolymers of L ‐lactide, glycolide, and trimethylene carbonate were synthesized via ring‐opening polymerization reaction of the cyclic monomers using Stannous octoate as initiator. Glycolide and L ‐lactide were prepared from their parent acids and then purified by multiple re‐crystallization from ethyl acetate. The thermal and mechanical properties of this polymer were characterized by means of thermogravimetry, differential scanning calorimetry, stress–strain measurements, and dynamic mechanical analysis. The glass transition temperature of the terpolymers changed from 33 to 51°C with composition in a predictable manner. The rheological properties of copolymers and molecular weight of each copolymer were determined showing good processability for making fibers. Using a mini‐extruder, it was possible to produce some filaments. The filaments produced at 140°C had appropriate ductility. The in vitro measurements, specifying the biological properties were also carried out. The sample with monomer composition LLA:GA:TMC = 60:34:6 showed a slower degradation rate than the one with LLA:GA:TMC = 54:34:12. The low‐toxicity bioresorbable terpolymers with good rheological and in vitro properties are the promising new materials for biomedical applications specially a new suture formulation. Copyright © 2011 John Wiley & Sons, Ltd.     

Separation of copolymers by adsorption liquid chromatography

Binary random copolymers of styrene with butadiene, methyl methacrylate, and t-butyl methacrylate, and styrene-methyl methacrylate-acrylonitrile random terpolymers were separated by adsorption chromatography. The HPLC conditions required for the sample to adsorb to the stationary phase are discussed. Sequence length as well as composition affected the elution volume of block and graft copolymers of styrene and butadiene. A mixture of terpolymers having different composition was separated to each component by cross-fractionation using two types of adsorption chromatography.     

Synthesis of thermosensitive hydrogels from acryloyloxyethyl trialkyl phosphonium chloride–N‐isopropylacrylamide–N,N′‐methylenebisacrylamide terpolymers and their temperature dependence of water absorption

Thermosensitive polymer hydrogels were prepared by the copolymerization of three kinds of acryloyloxyethyl trialkyl phosphonium chlorides (AETRs) with alkyl chains of different lengths, with N‐isopropyl acrylamide (NIPAAm) and N,N′‐methylenebisacrylamide (MBAAm). The water content of the AETR–NIPAAm–MBAAm terpolymers obtained at molar ratios of the crosslinking agent greater than 2 decreased with increasing temperature and decreased sharply around 35 °C. However, the water contents of the AETR–NIPAAm–MBAAm (X/100/1) terpolymers obtained at a molar ratio of 1 of the crosslinking agent increased once with increasing temperature and then decreased from 3 to around 40 °C. The water contents of the AETR–NIPAAm–MBAAm (3/100/1 or 2) terpolymers decreased with the increasing length of alkyl chains in phosphonium groups in the terpolymers. The water contents of the AETR–NIPAAm–MBAAm terpolymers increased by the addition of a small amount of urea and then decreased with increasing urea concentration. However, the water contents decreased abruptly with the addition of NaCl. The AETR–NIPAAm–MBAAm terpolymers exhibited high adsorption for sodium dodecylbenzene sulfonate but no adsorption for sodium benzene sulfonate. © 2001 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 1505–1514, 2001     

Synthesis,Characterization and Bactericidal Properties of Poly(N-vinyl-2-pyrrolidone-co-Maleic anhydride-co-N-Isopropyl acrylamide)

Summary: Radical-initiated terpolymerization of maleic anhydride (MA), N-vinyl-2-pyrrolidone (NVP) with N-isopyropyl acrylamide (NIPA) has been prepared as a way to obtain new water-soluble polymers. Structure, composition and thermal behaviour of synthesized terpolymers were determined by FTIR, UV-vis, ¹H NMR spectroscopy, elemental analysis (N content), differential scanning calorimetry, thermogravimetric and differential thermal analysis, gel permeation chromatography analysis (GPC), scanning electron microscopy (SEM) and X-ray diffraction analysis (XRD). The terpolymer composition-structure-property relationship indicates that the semicrystalline structure of terpolymers with different reaction times, degrees of crystallinity, and thermal behaviour depends on the content of carboxyl and amide-containing monomer linkage. The antimicrobial activities the terpolymers were evaluated against pathogen bacteria: Staphylococcus aureus, Salmonella enteridis, Streptococcucs faecalis, Eschericia coli, Klebsiella pneumoniae, and Pseudomonas aeruginosa. The antimicrobial activity was explored by the well-diffusion technique. All the studied polymers, containing biologically active moieties in the form of ionized cyclic amide and carboxylic acid groups, were more effective against Gram-positive than Gram-negative bacteria. The bactericidal effect of terpolymers against Gram negative bacteria increased with the increasing reaction times.     

Fluorinated,crosslinkable terpolymers based on vinylidene fluoride and bearing sulfonic acid side groups for fuel‐cell membranes

The radical terpolymerization of 8‐bromo‐1H,1H,2H‐perfluorooct‐1‐ene with vinylidene fluoride (VDF) and perfluoro(4‐methyl‐3,6‐dioxaoct‐7‐ene) sulfonyl fluoride is presented. Changing the feed compositions of these three fluorinated comonomers enabled us to obtain different random‐type poly[vinylidene fluoride‐ter‐perfluoro(4‐methyl‐3,6‐dioxaoct‐7‐ene) sulfonyl fluoride‐ter‐8‐bromo‐1H,1H,2H‐perfluorooct‐1‐ene] terpolymers containing various sulfonyl fluoride and brominated side groups. Yields higher than 70% were reached in all cases. The hydrolysis of the sulfonyl fluoride group into the ? SO₃Li function in the presence of lithium carbonate was quantitatively achieved without the content of VDF being affected, and so dehydrofluorination of the VDF base unit was avoided. These original terpolymers were then crosslinked via dangling bromine atoms in the presence of a peroxide/triallyl isocyanurate system, which produced films insoluble in organic solvents such as acetone and dimethylformamide (which totally dissolved uncured terpolymers). The acidification of ? SO₃Li into the ? SO₃H function enabled protonic membranes to be obtained. The thermal stabilities of the crosslinked materials were higher than those of the uncured terpolymers, and their electrochemical performances were investigated. According to the contents of the sulfonic acid side functions, the ion‐exchange capacities ranged from 0.6 to 1.5 mequiv of H⁺/g, whereas the water uptake and conductivities ranged from 5–26% (±11%) and from 0.5 to 6.0 mS/cm, respectively. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 4566–4578, 2006     

Poly(ethylene terephthalate) terpolyesters containing isophthalic and 5‐tert‐butylisophthalic units

Poly(ethylene terephthalate‐co‐isophthalate‐co‐5‐tert‐butylisophthalate) (PETI^tBI) terpolymers were investigated with reference to poly(ethylene terephthalate) (PET) homopolymer and poly(ethylene terephthalate‐co‐isophthalate) (PETI) copolymers. Three series of PETI^tBI terpolyesters, characterized by terephthalate contents of 90, 80, and 60 mol %, respectively, with different isophthalate/5‐tert‐butylisophthalate molar ratios, were prepared from ethylene glycol and mixtures of dimethyl terephthalate, dimethyl isophthalate, and 5‐tert‐butylisophthalic acid. The composition of the terpolymers and the composition of the feed agreed. All terpolymers had a random microstructure and number‐average molecular weights ranging from 10,000 to 20,000. The PETI^tBI terpolyesters displayed a higher glass‐transition temperature and a lower melting temperature than the PETI copolymers having the same content of terephthalic units. Thermal stability appeared essentially unchanged upon the incorporation of the 5‐tert‐butylisophthalic units. The PETI^tBIs were crystalline for terephthalate contents higher than 80 mol %, and they crystallized at lower rates than PETI. The crystal structure of the crystalline terpolymers was the same as that of PET with the 1,3‐phenylene units being excluded from the crystalline phase. Incorporation of isophthalate comonomers barely affected the tensile modulus and strength of PET, but the brittleness of the terpolymers decreased for higher contents in 5‐tert‐butylisophthalic units. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 124–134, 2003     

Preparation and characterization of soluble terpolymers from m‐phenylenediamine,o‐anisidine,and 2,3‐xylidine

A series of terpolymers were synthesized by the chemical oxidative polymerization of m‐phenylenediamine (MPD), o‐anisidine (AS), and 2,3‐xylidine (XY) in hydrochloride aqueous medium. The yield, intrinsic viscosity, and solubility of the terpolymers were studied by changing the MPD/AS/XY molar ratio from 100/0/0 to 53/39/8 to 0/100/0. It was discovered that the MPD/AS/XY terpolymers exhibit a higher polymerization yield and better solubility than MPD/AS and MPD/XY bipolymers having the same MPD molar content. The as‐prepared MPD/AS/XY terpolymer bases were characterized by Fourier transform infrared, ultraviolet–visible, ¹H NMR, and high‐resolution solid‐state ¹³C NMR spectroscopies; wide‐angle X‐ray diffraction; and thermogravimetry. The results suggested that the oxidative polymerization from MPD, AS, and XY is exothermic, and the resulting terpolymers are more easily soluble in some organic solvents than MPD homopolymer. The copolymer obtained was a real terpolymer containing MPD, AS, and XY units, and the actual MPD/AS/XY molar ratio calculated by solid‐state ¹³C NMR spectra of the polymers is very close to the feed ratio, although the AS content calculated on the basis of the ¹H NMR spectrum of the soluble part of the polymer is higher than the feed AS content. The terpolymers and MPD homopolymer exhibit a higher polymerization yield and much higher intrinsic viscosity and are more amorphous than the AS homopolymer. At a fixed MPD content of 70 mol %, the terpolymers exhibit an increased thermostability and activation energy of the major degradation in nitrogen and air with an increasing AS content. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 3989–4000, 2001     

Fluorine‐containing linear block terpolymers: Synthesis and self‐assembly in solution

Linear triblock terpolymers of poly(n‐butyl methacrylate)‐b‐poly(methyl methacrylate)‐b‐poly(2‐fluoroethyl methacrylate) (PnBMA‐PMMA‐P2FEMA) were synthesized by sequential reversible addition fragmentation chain transfer (RAFT) polymerization. Kinetic studies of the homopolymerization of 2FEMA by RAFT polymerization demonstrated controllable characteristics with fairly narrow polydispersities (～1.30). The resultant PnBMA‐PMMA‐P2FEMA triblock terpolymers were characterized via ¹H NMR, ¹⁹F NMR, and gel permeation chromatography. These polymers formed micellar aggregates in a selective solvent mixture. The as‐formed micelles were analyzed using scanning electron microscopy and dynamic light scattering. It was found that these terpolymers could directly self‐organize into complex micelles in a tetrahydrofuran/methanol mixture with diameters that depended on polymer composition. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Simultaneous dual end‐functionalization of peg via the passerini three‐component reaction for the synthesis of ABC miktoarm terpolymers

In this article, we demonstrate the Passerini three‐component reaction as a simple, effective method for the synthesis of polymers with double functional end groups, which are key precursors for the preparation of ABC miktoarm terpolymers. Thus, via the one‐step Passerini reaction of monomethoxy poly(ethylene glycol)–propionaldehyde (PEG‐CHO) with 2‐bromo‐2‐methylpropionic acid and propargyl isocyanoacetamide, the PEG chain end was simultaneously functionalized with one atom transfer radical polymerization (ATRP) initiating site and one alkynyl group. The resulting PEG(‐alkynyl)‐Br was then used for the synthesis of three types of miktoarm ABC terpolymers via two approaches. First, we conducted ATRP of N‐isopropylacrylamide (NIPAM), then click reaction with azido‐terminated polystyrene (PS‐N₃) or poly(tert‐butyl acrylate) (PtBA‐N₃) and obtained two ABC miktoarm terpolymers PEG(‐b‐PNIPAM)‐b‐PS and PEG(‐b‐PNIPAM)‐b‐PtBA. Alternatively, we conducted single electron transfer living radical polymerization of tBA and click reaction with PS‐N₃ simultaneously to give PEG(‐b‐PtBA)‐b‐PS. All the polymer precursors and miktoarm terpolymers have been characterized by ¹H NMR, Fourier transform infrared, gel permeation chromatography, demonstrating that both approaches provided well‐defined ABC miktoarm terpolymers. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

N‐Isopropylacrylamide/monoalkyl itaconate copolymers and N‐isopropylacrylamide/itaconic acid/dimethyl itaconate terpolymers

Temperature‐ and pH‐sensitive copolymers and terpolymers of N‐isopropylacrylamide (NIPAAm) with itaconic acid (IA), monomethyl itaconate (MMeI), monobutyl itaconate (MBuI), monooctyl itaconate (MOcI), monocetyl itaconate (MCeI), and dimethyl itaconate (DMI) were prepared by free radical solution polymerization method. The dependence of coil‐to‐globule transition on pH and composition, molecular structures, and reactivities of monoalkyl itaconates, molecular weight distributions, and glass transition temperatures of copolymers and terpolymers were investigated using FT‐IR and UV–visible spectroscopic techniques, gel permeation chromatography (GPC), differential scanning calorimetry (DSC), and acid–base titration methods. The temperature‐/pH‐dependent coil‐to‐globule transition measurements showed that, upon increasing the content and length of alkyl chains, the lower critical solution temperatures (LCSTs) were shifted to higher temperatures. This meant that with increase in the length of hydrophobic alkyl chain in the monoitaconates intramolecular intreactions between the carboxyl groups were suppressed and LCSTs increased. The aqueous solution behaviors of NIPAAm/IA/DMI terpolymers also revealed that, even if the terpolymer hydrophobicity is increased by adding DMI units, the presence of IA units overcame the decrease in hydrophilicity of the terpolymers. The presence of DMI units in the terpolymers balanced the hydrophilic character of IA. DSC results supported the ones obtained from the pH‐dependent coil‐to‐globule transition measurements. An increase in both the chain length of alkyl groups attached to the monoitaconates and the contents of the mono‐ and dialkyl itaconates in the copolymers and terpolymers decreased the T_gs. In the case of NIPAAm/IA and NIPAAm/MMeI copolymers, the presence of the carboxyl groups forming hydrogen bonds increased the T_g, while the monoalkyl and dialkyl itaconates such as MBuI, MOcI, MCeI and DMI lead to a decrease in T_g of copolymers and terpolymers because of the suppression of intramolecular interactions (resulting from the ? COOH and ? COO^? groups) through the longer alkyl spacers. The dependence of the thermosensitivity of these NIPAAm copolymers and terpolymers on different conditions of pH, and the nature and content of comonomers suggests that they can be useful in biotechnology and drug delivery applications which involve small changes in pH and temperature. Copyright © 2009 John Wiley & Sons, Ltd.     

Synthesis and properties of polylactide terpolymers P(LLA‐TMC‐GA) catalyzed by zirconium (IV) acetylacetonate

A series of L‐lactide (LLA), 1,3‐trimethylene carbonate (TMC) and glycolide (GA) terpolymers (LTG) of different monomer molar ratios were synthesized by using ring‐opening copolymerization. An effective and low‐toxic zirconium (IV) acetylacetonate Zr(Acac)₄ was used as catalyst. The viscosity‐average molecular weights (M_η) of obtained polymers were all above 2.2×10⁴ g/mol. The chemical structure and viscosity of terpolymers were confirmed by Fourier transform infrared spectroscopy (FTIR), ¹H nuclear magnetic resonance (¹HNMR), ¹³C nuclear magnetic resonance (¹³CNMR) and an Ubbelohde viscometer. The thermal and mechanical properties were investigated by means of differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), X‐ray diffraction (XRD) and stress‐strain measurements. Results suggested that all terpolymers were amorphous and showed good thermal stability. Also it was found that elongation increased with the decreasing of LLA unit. More importantly, terpolymers displayed shape memory property when deformation temperatures were 14‐15 °C above T_g.