Calorimetric determination of enthalpy changes for proton ionization of N-[2-hydroxyethyl]piperazine-N′-[2-ethane sulfonic acid] (HEPES) and N-[2-hydroxyethyl]piperazine-N′-[2-hydroxypropane sulfonic acid] (HEPPSO) in water-methanol mixtures

Enthalpies for the two proton ionizations of the biochemical buffers N-[2-hydroxyethyl]piperazine-N′-[2-ethane sulfonic acid] (HEPES) and N-[2-hydroxyethyl]piperazine-N′-[2-hydroxypropane sulfonic acid] (HEPPSO) were obtained in water-methanol mixtures with methanol mole fraction (X_m) from 0 to 0.360. With increasing methanol, the ionization enthalpy for the first proton (ΔH₁) of HEPES increased steadily from 8.4 to 15.3 kJ mol⁻¹ whereas that for HEPPSO rose to a maximum of 21.0 kJ mol⁻¹ at X_m = 0.123 before dropping to 18.4 kJ mol⁻¹ at X_m = 0.360. The ionization enthalpy for the second proton (ΔH₂) of HEPES varied from 20.8 kJ mol⁻¹ in water to 13.6 kJ mol⁻¹ at X_m = 0.360 with a maximum of 24.8 kJ mol⁻¹ at X_m = 0.194. For HEPPSO, ΔH₂ increased steadily from 23.4 to 29.2 kJ mol⁻¹. The solvent composition was selected so as to include the region of maximum structure enhancement of water by methanol. The results were interpreted in terms of solvent-solvent and solvent-solute interactions.     

Structural changes accompanying negative thermal expansion in Zr2(MoO4)(PO4)2

Zr₂(MoO₄)(PO₄)₂ is orthorhombic (Sc₂W₃O₁₂ structure) from 9 to at least 400 K, and shows anisotropic volume negative thermal expansion (α_a=−8.35(4)×10⁻⁶ K⁻¹; α_b=3.25(3)×10⁻⁶ K⁻¹; α_c=−8.27(5)×10⁻⁶ K⁻¹ in the range 122-400 K) similar in magnitude to A₂M₃O₁₂ (M—Mo or W) with large A³⁺. The contraction on heating is associated with a pattern of Zr-O-Mo/P bond angle changes that is somewhat similar, but not the same as that for Sc₂W₃O₁₂. On heating, the most pronounced reductions in the separation between the crystallographic positions of neighboring Zr and P are not associated with significant reductions in the corresponding Zr-O-P crystallographic bond angles, in contrast to what was seen for Sc₂W₃O₁₂.     

Biomimetic sensor based on MnMn complex as manganese peroxidase mimetic for determination of rutin

A novel biomimetic sensor for rutin determination based on a dinuclear complex [Mn^IIIMn^II(Ldtb)(μ-OAc)₂]BPh₄ containing an unsymmetrical dinucleating ligand, 2-[N,N-bis(2-pyridylmethyl)-aminomethyl]-6-[N-(3,5-di-tert-butyl-2-oxidoben-zyl)-N-(2-pyridylamino)aminomethyl]-4-methylphenol (H₂Ldtb), as a manganese peroxidase mimetic was developed. Several parameters were investigated to evaluate the performance of the biomimetic sensor obtained after the incorporation of the dinuclear complex in a carbon paste. The best performance was obtained in 75:15:10% (w/w/w) of the graphite powder:Nujol:Mn^IIIMn^II complex, 0.1 mol L⁻¹ phosphate buffer solution (pH 6.0) and 4.0 × 10⁻⁵ mol L⁻¹ hydrogen peroxide. The response of the sensor towards rutin concentration was linear using square wave voltammetry in the range of 9.99 × 10⁻⁷ to 6.54 × 10⁻⁵ mol L⁻¹ (r = 0.9998) with a detection limit of 1.75 × 10⁻⁷ mol L⁻¹. The recovery study performed with pharmaceuticals ranged from 96.6% to 103.2% and the relative standard deviation was 1.85% for a solution containing 1.0 × 10⁻³ mol L⁻¹ rutin (n = 6). The lifetime of this biomimetic sensor was 200 days (at least 750 determinations). The results obtained for rutin in pharmaceuticals using the biomimetic sensor and those obtained with the official method are in agreement at the 95% confidence level.     

Spectroscopic and structural characterization of Na2[(VO)2(ttha)]·8H2O (ttha = triethylenetetraamine-N,N,N′,N″,N′″,N′″-hexaacetate): Interpreting the results with density functional theory

Na₂[(V^IVO)₂(ttha)]·8 H₂O (ttha = triethylenetetraamine–N,N,N′,N″,N′″,N′″–hexaacetate ion), prepared by treating [VO(H₂O)₅][(VO)₂(ttha)]·4 H₂O with Na₆(ttha), has been characterized by single crystal X-ray diffraction, infrared spectroscopy, UV–Vis absorption spectroscopy, electron spin resonance spectroscopy, and modeled by density functional theory (DFT). The X-ray structure revealed a distorted octahedral geometry around each vanadium center. The electronic absorption spectrum of [(VO)₂(ttha)]²⁻ (aq) features absorptions at ca. 200 nm (ε > 13900 L mol⁻¹ cm⁻¹), 255 nm (ε = 3480 L mol⁻¹ cm⁻¹), 586 nm (ε = 33 L mol⁻¹ cm⁻¹), and 770 nm (ε = 38 L mol⁻¹ cm⁻¹). The time-dependent density functional theory (TDDFT) calculated electronic absorption spectrum was remarkably similar to the actual spectrum, and TDDFT predicts absorption peaks at 297, 330, 458, 656, and 798 nm. TDDFT assigned the peak at 798 nm to be the α spin HOMO → LUMO transition. Hence, the peak at 770 nm in the actual spectrum is most likely the α spin HOMO → LUMO transition. Moreover, the TDDFT calculations revealed that the α spin HOMO and LUMO are partly comprised of d orbitals on both vanadium centers, and the first derivative electron spin resonance spectrum also suggests that the two unpaired electrons in [(VO)₂(ttha)]²⁻ are localized near the vanadium centers.     

Mechanism of the low thermal expansion in α-Hf2O(PO4)2 and its zirconium analog

The thermal expansion of recently characterized α-Zr₂O(PO₄)₂ and α-Hf₂O(PO₄)₂ is found to be very low (respectively 2.6 and 2.9×10⁻⁶ K⁻¹, 20-900  °C). High-temperature X-ray diffraction and Rietveld analysis allowed to identify a dual contraction mechanism, involving a classical ring deformation and the rocking of bridging oxygens.     

Energetics of cobalt phosphate frameworks: α, β, and red NaCoPO4

Thermal behavior, relative stability, and enthalpy of formation of α (pink phase), β (blue phase), and red NaCoPO₄ are studied by differential scanning calorimetry, X-ray diffraction, and high-temperature oxide melt drop solution calorimetry. Red NaCoPO₄ with cobalt in trigonal bipyramidal coordination is metastable, irreversibly changing to α NaCoPO₄ at 827 K with an enthalpy of phase transition of −17.4±6.9 kJ mol⁻¹. α NaCoPO₄ with cobalt in octahedral coordination is the most stable phase at room temperature. It undergoes a reversible phase transition to the β phase (cobalt in tetrahedra) at 1006 K with an enthalpy of phase transition of 17.6±1.3 kJ mol⁻¹. Enthalpy of formation from oxides of α, β, and red NaCoPO₄ are −349.7±2.3, −332.1±2.5, and −332.3±7.2 kJ mol⁻¹; standard enthalpy of formation of α, β, and red NaCoPO₄ are −1547.5±2.7, −1529.9±2.8, and −1530.0±7.3 kJ mol⁻¹, respectively. The more exothermic enthalpy of formation from oxides of β NaCoPO₄ compared to a structurally related aluminosilicate, NaAlSiO₄ nepheline, results from the stronger acid-base interaction of oxides in β NaCoPO₄ (Na₂O, CoO, P₂O₅) than in NaAlSiO₄ nepheline (Na₂O, Al₂O₃, SiO₂).     

Synthesis, crystal structure and thermal behavior of Sr3B2SiO8 borosilicate

Single crystals of Sr₃B₂SiO₈ were obtained by solid-state reaction of stoichiometric mixture at 1200 °C. The crystal structure of the compound has been solved by direct methods and refined to R1=0.064 (wR=0.133). It is orthorhombic, Pnma, a=12.361(4), b=3.927(1), c=5.419(1) Å, V=263.05(11) Å³. The structure contains zigzag pseudo-chains running along the b axis and built up from corner sharing (Si,B)−O polyhedra. Boron and silicon are statistically distributed over one site with their coordination strongly disordered. Sr atoms are located between the chains providing three-dimensional linkage of the structure.The formation of Sr₃B₂SiO₈ has been studied using annealing series in air at 900-1200 °C. According powder XRD, the probe contains pure Sr₃B₂SiO₈ over 1100 °C. The compound is not stable below 900 °C. In the pseudobinary Sr₂B₂O₅-Sr₃B₂SiO₈ system a new series of solid solutions Sr_3−xB₂Si_1−xO_8−3x (x=0-0.9) have been crystallized from melt. The thermal behavior of Sr₃B₂SiO₈ was investigated using powder high-temperature X-ray diffraction (HTXRD) in the temperature range 20-900 °C. The anisotropic character of thermal expansion has been observed: α_a= −1.3, α_b=23.5, α_c=13.9, and α_V=36.1×10⁻⁶ °C⁻¹ (25 °C); α_a= −1.3, α_b=23.2, α_c=5.2, and α_V=27.1×10⁻⁶ °C⁻¹ (650 °C). Maximal thermal expansion of the structure along of the chain direction [0 1 0] is caused by the partial straightening of chain zigzag. Hinge mechanism of thermal expansion is discussed.     

Synthesis and nonlinear optical properties of new symmetrically substituted stilbenes

Three new chromophores and trans-4-(N-(ethyl 4″-nitrobenzoate)-N-ethyl amino)-4′-(dimethyl amino) stilbene (DMANHAS) have been synthesized and whose chemical structures have been characterized by ¹H NMR, IR, and elemental analyses. Linear absorption, single-photon-induced fluorescence and two-photon-induced fluorescence are experimentally studied. Trans-4-(N-2-hydroxyethyl-N-ethyl amino)-4′-(dimethyl amino)stilbene (DMAHAS) and trans-4-(N-2-hydroxyethyl-N-ethyl amino)-4′-(diethyl amino)stilbene (DEAHAS) have effective two-photon absorption cross-sections of σ₂=0.91×10⁻⁴⁶ cm⁴ s/photon and σ₂=1.19×10⁻⁴⁶ cm⁴ s/photon at 532 nm by using an open aperture Z-scan technique, respectively. When pumped with 800 nm laser irradiation, DMAHAS and DEAHAS indicate strong two-photon-induced blue fluorescence of 436 and 440 nm, respectively, while trans-4-(N-(ethyl 4″-nitrobenzoate)-N-ethyl amino)-4′-(diethyl amino) stilbene (DEANHAS) and DMANHAS exhibit no fluorescence.     

Synthesis and characterization of new poly(azomethine ester)s having phenylthiourea units

New polyesters having azomethine and phenylthiourea groups in the polymer backbone were synthesized by interfacial polycondensation method. The dihydroxy monomer N-(4-hydroxy-3-methoxybenzal) N′-(4′-hydroxyphenyl)thiourea was condensed with six diacid chlorides: terephthaloyl, isophthaloyl, azeloyl, suberoyl, pimeloyl and adipolyl chlorides. The resulting polyesters were characterized by viscosity, IR, NMR and TGA analysis. The wholly aromatic poly(azomethine ester) derived from terephthaloyl chloride when blended with polyaniline/NH₄OH, polyaniline/HCl and pure polyaniline shows conductance in the range 3.2 × 10⁻³-0.91 × 10⁻¹ S cm⁻¹.     

Synthesis and decarboxylation of N-acyl-α-triphenylphosphonio-α-amino acids: a new synthesis of α-(N-acylamino)alkyltriphenylphosphonium salts

4-Phosphoranylidene-5(4H)-oxazolones 1 undergo hydrolysis in THF in the presence of HBF₄ at room temperature to give N-acyl-α-triphenylphosphonioglycines 3 (R² = H) in very good yields. 4-Alkyl-4-triphenylphosphonio-5(4H)-oxazolones 2 react with water in CH₂Cl₂/THF solution without any acidic catalyst at 0-5 °C in a few days yielding N-acyl-α-triphenylphosphonio-α-amino acids 3 (R² = Me) or α-(N-acylamino)alkyltriphenylphosphonium salt 4 (R² = CH₂OMe). α-Triphenylphosphonio-α-amino acids 3, on heating up to 105-115 °C under reduced pressure (5 mmHg) or on treatment with diisopropylethylamine in CH₂Cl₂ at 20 °C undergo decarboxylation to give the corresponding α-(N-acylamino)alkyltriphenylphosphonium salts 4, usually in very good yields.     

Thermodynamic studies of monuron

Monuron (C₉H₁₁ClN₂O; N,N-dimethyl-N′-(4-chlorophenyl) urea, CAS 150-68-5) was synthesized and the heat capacities of the compound were measured in the temperature range from 79 to 385 K with a high precision automated adiabatic calorimeter. No phase transition or thermal anomaly was observed in this range. The enthalpy and entropy data of the compound relative to the reference temperature 298.15 K were derived based on the heat capacity data. The thermodynamic properties of the compound were further investigated through DSC and TG analysis. The melting point, the molar enthalpy, and entropy of fusion were determined to be 447.6±0.1 K, 29.3±0.2 kJ mol⁻¹, and 65.4 J K⁻¹ mol⁻¹, respectively.     

The phonon-assisted proton transfer between hydrazinium cations in (N2H5)2HMF6·2H2O (M∈{Ga, Al, Fe}) type compounds. FT IR and quantum theoretical study

FT IR spectra of a series of compounds with a general formula (N₂H₅)₂HMF₆·2H₂O (where M∈{Ga, Al, Fe}) were recorded at variable temperatures (from ∼100 to 300 K, at 10 K intervals). The appearance of the spectral region of ν(N-N) modes due to hydrazinium cations further supports the conclusions regarding the N₂H₅⁺?H⁺?N₂H₅⁺ hydrogen bond potential well based on Raman spectroscopic data [J. Raman Spectrosc. 28 (1997) 315]. The appearance of two bands corresponding to the ν(N-N) modes in the low temperature FT IR spectra that merge into one upon heating is a clear evidence of a symmetric potential well through which a phonon-assisted proton transfer (PAPT) occurs at higher temperatures. Ab initio MP2/6-311++G(2d,p) quantum chemical study of the proton transfer potential within the N₂H₅⁺?H⁺?N₂H₅⁺ cluster confirmed its double-minimum character. The first-order saddle point found on the MP2/6-311++G(2d,p) potential energy hypersurface corresponds to a centrosymmetric structure (C_2h symmetry), with the proton placed at the inversion center. The potential energy curve along the tunnelling coordinate was calculated by the intrinsic reaction coordinate (IRC) methodology, leading to an adiabatic PT barrier height of 3.94 kcal mol⁻¹ and a tunneling rate of 1.98 s⁻¹. The corresponding MP4(SDTQ)/6-311++G(2d,p)//MP2/6-311++G(2d,p) value of the adiabatic PT barrier height is 4.26 kcal mol⁻¹.     

Electrochemical,magnetic, catalytic and DNA cleavage studies of binuclear copper(II) complexes derived from pendant substituted tetraaza macrobicyclic compartmental ligands

A series of macrobicyclic unsymmetrical binuclear copper(II) complexes of compartmental ligands were synthesized from the Schiff base condensation of 1,8[N,N′-bis{(3-formyl-2-hydroxy-5-methyl)benzyl}]-1,4,8,11- tetraaza-5,5,7,12,12,14-hexa methylcyclotetradecane with diamines like 1,2-diamino ethane, 1,3-diamino propane, 1,4-diaminobutane, 1,2-diaminobenzene and 1,8-diaminonaphthalene. The complexes were characterized by elemental and spectral analysis. Electrochemical studies of the copper(II) complexes show two irreversible one-electron reduction processes around E¹_pc = −0.70 to −1.10 V and E²_pc = −0.98 to −1.36 V. ESR spectra of the binuclear copper(II) complexes show a broad signal at g = 2.10 and μ_eff values in the range 1.46–1.59 BM, which convey the presence of antiferromagnetic coupling. Cryomagnetic investigation of the binuclear complexes [Cu₂L³(ClO₄)](ClO₄) and [Cu₂L⁴(ClO₄)](ClO₄) show that the observed −2J values are 144 and 216 cm⁻¹, respectively. The observed initial rate (V_in) for the catalytic hydrolysis of p-nitrophenyl phosphate by the binuclear copper(II) complexes were in the range 1.8 × 10⁻⁵ to 2.1 × 10⁻⁵ Ms⁻¹. The initial rate (V_in) for the catalytic oxidation of catechol to o-quinone by the binuclear copper(II) complexes were in the range 2.7 × 10⁻⁵ to 3.5 × 10⁻⁵ Ms⁻¹. The copper(II) complexes have been found to promote cleavage of plasmid pBR 322 DNA from the supercoiled form I to the open circular form II.     

Preparation, structure and photoluminescence properties of Eu and Ce-doped SrYSi4N7

Undoped and Eu²⁺ or Ce³⁺-doped SrYSi₄N₇ were synthesized by solid-state reaction method at 1400-1660 °C under nitrogen/hydrogen atmosphere. The crystal structure was refined from the X-ray powder diffraction data by the Rietveld method. SrYSi₄N₇ and EuYSi₄N₇, being isotypic with the family of compounds MYbSi₄N₇ (M=Sr, Eu, Ba) and BaYSi₄N_7, crystallize with the hexagonal symmetry: space group P6₃mc (No. 186), Z=2, a=6.0160 (1) Å, c=9.7894 (1) Å, V=306.83(3) Å³; and a=6.0123 (1) Å, c=9.7869 (1) Å, V=306.37(1) Å³, respectively. Photoluminescence properties have been studied for Sr_1−xEu_xYSi₄N₇ (x=0-1) and SrY_1−xCe_xSi₄N₇ (x=0-0.03) at room temperature. Eu²⁺-doped SrYSi₄N₇ shows a broad yellow emission band peaking around 548-570 nm, while Ce³⁺-doped SrYSi₄N₇ exhibits a blue emission band with a maximum at about 450 nm. SrYSi₄N₇:Eu²⁺ can be very well excited by 390 nm radiation, which makes this material attractive as conversion phosphor for LED lighting applications.     

Diastereo- and enantioseparation of a N-Boc amino acid with a zwitterionic quinine-based stationary phase: Focus on the stereorecognition mechanism

A chiral chromatography method enabling the simultaneous diastereo- and enantioseparation of N^α-Boc-N⁴-(hydroorotyl)-4-aminophenylalanine [Boc-Aph(Hor)-OH, 1] was optimized with a quinine-based zwitterionic stationary phase. The polar-ionic eluent system consisting of ACN:MeOH:water—49.7:49.7:0.6 (v/v/v) with formic acid (4.0 mM) and diethylamine (2.5 mM), allowed the successful separation of the four acid stereoisomers: α_d,d-/d,l-1 = 1.08; α_d,l-/l,d-1 = 1.08; α_l,d-/l,l-1 = 1.40.     

Synthesis,structure, and electrochemistry of pyridinecarboxamide cobalt(III) complexes; the effect of bridge substituents on the redox properties

Two series of complexes of the types trans-[Co^III(Mebpb)(amine)₂]ClO₄ {Mebpb²⁻ = N,N-bis(pyridine-2-carboxamido)-4-methylbenzene dianion, and amine = pyrrolidine (prldn) (1a), piperidine (pprdn) (2a), morpholine (mrpln) (3a), benzylamine (bzlan) (4a)}, and trans-[Co^III(cbpb)(amine)₂]X {cbpb²⁻ = N,N-bis(pyridine-2-carboxamido)-4-chlorobenzene dianion, and amine = pyrrolidine (prldn), X = PF₆ (1b), piperidine (pprdn), X = PF₆ (2b), morpholine (mrpln), X = ClO₄ (3b), benzylamine (bzlan), X = PF₆ (4b)} have been synthesized and characterized by elemental analyses, IR, UV–Vis, and ¹H NMR spectroscopy. The crystal structure of 1a has been determined by X-ray diffraction. The electrochemical behavior of these complexes, with the goal of evaluating the effect of axial ligation and equatorial substitution on the redox properties, is also reported. The reduction potential of Co^III, ranging from −0.53 V for (1a) to −0.31 V for (3a) and from −0.48 V for (1b) to −0.22 V for (3b) show a relatively good correlation with the σ-donor ability of the axial ligands. The methyl and chloro substituents of the equatorial ligand have a considerable effect on the redox potentials of the central cobalt ion and the ligand-centered redox processes.     

Potentiometric evaluation of calix[4]arene anion receptors in membrane electrodes: phosphate detection

Ion-selective membrane electrodes doped with the urea- or thiourea-functionalised calix[4]arenes, 5,11,17,23-tetra-tert-butyl-25,27-bis[[4-N′-(phenylureido)butyl]oxy]-26,28-dipropoxy calix[4]arene (I) and 5,11,17,23-tetra-tert-butyl-25,27-bis[[4-(N′-phenylthioureido)-butyl]oxy]-26,28-dipropoxy calix[4]arene (II), were evaluated for anion sensing. Potentiometric results show that these calixarene ionophore-based membrane electrodes exhibit a good sensitivity to aqueous solutions of the monohydrogen orthophosphate species HPO₄²⁻ in the concentration range 5.0 × 10⁻⁵ to 1.0 × 10⁻¹ M, with near-Nernstian response slopes of −33.0 and −28.0 mV dec⁻¹ for ionophores I and II, respectively. Selectivity coefficient values for monohydrogen orthophosphate over a range of common anions were determined by the fixed interference and matched potential methods and indicated that these membrane electrodes exhibit a good selectivity for HPO₄²⁻ with respect to the other anions, including sulfate and nitrate.     

Cu2Sc2Ge4O13, a novel germanate isotypic with the quasi-1D compound Cu2Fe2Ge4O13 between 100 and 298 K

The germanate compound Cu₂Sc₂Ge₄O₁₃ has been synthesized by solid-state ceramic sintering techniques between 1173 and 1423 K. The structure was solved from single-crystal data by Patterson methods. The title compound is monoclinic, a=12.336(2) Å, b=8.7034(9) Å, c=4.8883(8) Å, β=95.74(2), space group P2₁/m, Z=4. The compound is isotypic with Cu₂Fe₂Ge₄O₁₃, described very recently. The structure consists of crankshaft-like chains of edge-sharing ScO₆ octahedra running parallel to the crystallographic b-axis. These chains are linked laterally by [Cu₂O₆]⁸⁻ dimers forming a sheet of metal-oxygen-polyhedra within the a-b plane. These sheets are separated along the c-axis by [Ge₄O₁₃]¹⁰⁻ units. Cooling to 100 K does not alter the crystallographic symmetry of Cu₂Sc₂Ge₄O₁₃. While the b, c lattice parameter and the unit cell volume show a positive linear thermal expansion (α=6.4(2)×10⁻⁶, 5.0(2)×10⁻⁶ and 8.3(2)×10⁻⁶ K⁻¹ respectively), the a lattice parameter exhibits a negative thermal expansion (α=−3.0(2)×10⁻⁶ K⁻¹) for the complete T-range investigated. This negative thermal expansion of a is mainly due to the increase of the Cu-Cu interatomic distance, which is along the a-axis. Average bond lengths remain almost constant between 100 and 298 K, whereas individual ones partly show both significant shortages and lengthening.     

Syntheses and evaluation of 7-deoxycholic amide-based tweezer-type copper(II) ion-selective ionophores

Seven tweezer-type copper(II) ion-selective ionophores; that is, 3α,12α-bis[[[N-(R)thiocarboxamino]acetyl]oxy]-N,N-dioctyl-5β-cholan-24-amides and 3α,12α-bis[[[N-(R)thiocarboxaminomethyl]acetyl]oxy]-N,N-dioctyl-5β-cholan-24-amides (R = alkyl and phenyl), were newly designed and synthesized. Their potentiometric evaluation of the poly(vinyl chloride) (PVC) membranes showed excellent affinity and selectivity to copper(II) ions over those of other transition metal ions and alkali/alkaline earth metal ions. These membranes exhibited super-Nernstian responses toward copper(II) ions (34-36 mV/decade), with detection limits of 10⁻⁶-10⁻⁷ M.     

Stereoselective synthesis of (E)-N,N-diethyl-3-(imidazo[1,2-a]pyrid-2-yl)-2-(phenylsulfonyl)propenamide

The title compound, gem-amidovinylsulfone 3, was synthesized stereoselectively by aldolic condensation of N,N-diethylphenylsulfonylacetamide 1 on imidazo[1,2-a]pyridine-2-carbaldehyde 2 adding Et₃N at the end. The X-ray crystal structure of 3 [C₂₀H₂₁N₃O₃S: M_r=383.5, monoclinic, P2₁, a=8.191(4) Å, b=21.132(2) Å, c=11.752(1) Å, β=96.40(2)°, V=2022(1) Å³, Z=4 (two molecules per asymmetric unit), D_calc=1.260 g cm⁻³, λ(Mo Kα)=0.71073 Å, μ=0.184 mm⁻¹, F(000)=808, T=293(2)K, R=0.059 for 5105 observed reflections with I≥2σ(I)] was determined, and confirmed the (E) configuration.