氧化铬柱层状三氧化钼的合成

采用醋酸铬[Cr(OAc)~3]水溶液与具有层状结构的钼青铜{[Na(H~2O)~5]~0~.~2~5MoO~3]进行离子交换瓜制得铬齐聚体柱撑的层状氧化钼化合物。经350℃焙烧后,首次得到了多孔高比表面积的氧化铬柱层状氧化钼材料。通过XRD,TEM,DTA和BET测试手段对其进行了表征,并考察了350℃时不同的焙烧气氛对产物层间距和表面积等的影响。结果表明,在不同气氛中焙烧,产物层间距相同(1.092nm),但比表面积有很大的变化,其中,在含4%(体积分数)氧气的氮氧混合气中焙烧,获得的样品比表面积(BET)最大,达82.4m^2·g^-^1,平均孔径为6.42nm。     

Morphology-controllable synthesis and characterization of hierarchical 3D Co1-xMnxO nanostructures

Multirod and hierarchically spherical 3D Co(1-x)Mn(x)O (2/3 < or = x < or = 1) nanostructures have been successfully synthesized by the decomposition of acetylacetonate precursors. Their morphologies could be controlled through tuning the heat rating which affects the nucleation. The rods grew along [110] directions to reduce the appearance of high-energy crystallographic {110} planes. The hierarchically spherical superstructures were formed by a three-dimensional oriented-attachment mechanism. Magnetic measurement indicates that the MnO nanomaterials with hierarchically spherical superstructures show an antiferromagnetic transition temperature at 121 K, similar to that of bulk, and a ferromagnetic ordering exists at low temperature. Such anomalous magnetic properties arise plausibly from their microstructure characteristics.     

Liquid phase deposition synthesis of hexagonal molybdenum trioxide thin films

Hexagonal molybdenum trioxide thin films with good crystallinity and high purity have been fabricated by the liquid phase deposition (LPD) technique using molybdic acid (H₂MoO₄) dissolved in 2.82% hydrofluoric acid (HF) and H₃BO₃ as precursors. The crystal was found to belong to a hexagonal hydrate system MoO₃.nH₂O (n~0.56). The unit cell lattice parameters are a=10.651 Å, c=3.725 Å and V=365.997 Å³. Scanning electron microscope (SEM) images of the as-deposited samples showed well-shaped hexagonal rods nuclei that grew and where the amount increased with increase in reaction time. X-ray photon electron spectroscopy (XPS) spectra showed a Gaussian shape of the doublet of Mo 3d core level, indicating the presence of Mo⁶⁺ oxidation state in the deposited films. The deposited films exhibited an electrochromic behavior by lithium intercalation and deintercalation, which resulted in coloration and bleaching of the film. Upon dehydration at about 450 °C, the hexagonal MoO₃.nH₂O was transformed into the thermodynamically stable orthorhombic phase.     

Pechini synthesis and characterization of molybdenum carbide and nickel molybdenum carbide

Carbides, such as η-Ni₆Mo₆C, are considered as low-cost substitutes for noble metal catalysts for present applications in hydrodesulfurization and for a possible future sulfur-tolerant fuel cell anode catalyst. Most synthesis methods set the carbon content of the carbides by a carbon-based atmosphere or solid carbon in the synthesis. We show here that β-Mo₂C and η-Ni₆Mo₆C can be synthesized using a Pechini process, simply by heating metal acetates mixed with citric acid and ethylene glycol in one step under H₂ with the only source of carbon being the precursor solution. The β-Mo₂C forms when heating a Mo-acetate precursor at 850 °C. When using Ni- and Mo-acetates, β-Mo₂C forms at 700 °C and lower temperatures, while η-Ni₆Mo₆C forms during heating at 800-900 °C. The η-Ni₆Mo₆C has a surface area of 95.5 m² g⁻¹ and less than 10 m² g⁻¹ when prepared at 800 and 900 °C, respectively. Some Ni₃C, Ni, and NiC impurities are also present in the nanostructured η-Ni₆Mo₆C that was prepared at 900 °C. The η-Ni₆Mo₆C materials made by the Pechini process are compared with those made from a traditional synthesis, using metal organic precursors at 1000 °C under CO/CO₂ mixtures with a carbon activity of 0.011. Our results imply that H₂ and the Pechini process can be used to achieve carbon activities similar to those obtained by methods using gaseous or solid carbon sources.     

Systematic synthesis and characterization of single-crystal lanthanide phenylphosphonate nanorods

Using low-temperature hydrothermal methods, nanoscale lanthanide phenylphosphonates species with different morphologies, namely, nanoparticles and nanorods, have been systematically synthesized. The possible growth mechanism of these nanorods was discussed. X-ray diffraction, transmission electron microscopy, electron diffraction, and photoluminescence spectra were used to characterize these materials. The photoluminescent properties of Eu(O3PC6H5)(HO3PC6H5) and La0.91Eu0.09(O3PC6H5)(HO3PC6H5) nanorods were discussed.     

Systematic synthesis and characterization of single-crystal lanthanide orthophosphate nanowires

A simple hydrothermal method has been developed for the systematic synthesis of lanthanide orthophosphate crystals with different crystalline phases and morphologies. It has been shown that pure LnPO(4) compounds change structure with decreasing Ln ionic radius: i.e., the orthophosphates from Ho to Lu as well as Y exist only in the tetragonal zircon (xenotime) structure, while the orthophosphates from La to Dy exist in the hexagonal structure under hydrothermal treatment. The obtained hexagonal structured lanthanide orthophosphate LnPO(4) (Ln = La, Ce, Pr, Nd, Sm, Eu, Gd, Tb, and Dy) products have a wirelike morphology. In contrast, tetragonal LnPO(4) (Ln = Ho, Er, Tm, Yb, Lu, Y) samples prepared under the same experimental conditions consist of nanoparticles. The obtained hexagonal LnPO(4) (Ln = La --> Tb) can convert to the monoclinic monazite structured products, and their morphologies remained the same after calcination at 900 degrees C in air (Hexagonal DyPO(4) is an exceptional case, it transformed to tetragonal DyPO(4) by calcination), while the tetragonal structure for (Ho--> Lu, Y)PO(4) remains unchanged by calcination. The resulting LnPO(4) (Ln = La --> Dy) products consist almost entirely of nanowires/nanorods with diameters of 5-120 nm and lengths ranging from several hundreds of nanometers to several micrometers. Europium doped LaPO(4) nanowires were also prepared, and their photoluminescent properties were reported. The optical absorption spectrum of CePO(4) nanowires was measured and showed some differences from that of bulk CePO(4) materials. The possible growth mechanism of lanthanide phosphate nanowires was explored in detail. X-ray diffraction, field-emission scanning electron microscopy, transmission electron microscopy, electron diffraction, infrared absorption spectra, X-ray photoelectron spectroscopy, optical absorption spectra, and photoluminescence spectra have been employed to characterize these materials.     

Large-scale synthesis of single-crystal hexagonal tungsten trioxide nanowires and electrochemical lithium intercalation into the nanocrystals

Single-crystal nanowires of hexagonal tungsten trioxide in a large scale have been successfully prepared by a simple hydrothermal method without any templates and catalysts. Uniform h-WO₃ nanowires with diameter of 25-50 nm and length of up to several micrometers are obtained. It is found that the morphology and crystal form of the final products are strongly dependent on the amount of the sulfate and pH value of the reaction system. The electrochemical performances of the as-prepared h-WO₃ nanowires as anodic materials of Li-ion batteries have also been investigated. It deliveres a discharge capacity of 218 mAh g⁻¹ for the first cycle. In addition, the cycle ability of the nanocrystals is superior to that of bulk materials, which implies the morphology and particle size have the influence on the electrochemical performances.     

三氧化钼溶胶凝胶光致变色的研究

通过金属钼粉与过氧化氢溶液反应制备三氧化钼溶胶和凝胶,在高压汞灯的照射下,溶胶和凝胶由浅黄色变成蓝色。Raman光谱研究表明：通过紫外光照,MoO3凝胶结构进行了重整,呈有序排布。乙醇相的MoO3溶胶在紫外光照或长期自然光照下,均表现出光致变色特性。电子自旋共振(ESR)和X射线电子能谱(XPS)研究表明：空气中的MoO3经光照同时接受质子和电子后,生成了蓝色的钼青铜,其中Mo^6^+被还原成了Mo^5^+离子。     

Hydrothermal synthesis and characterization of hexagonal and monoclinic neodymium orthophosphate single-crystal nanowires

Hexagonal and monoclinic NdPO₄ nanowires about 5-50 nm in diameter and up to several micrometers long were prepared through hydrothermal reaction in 100°C and 220°C, respectively. The products were characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM), X-ray photoelectron spectra (XPS), and high-resolution transmission electron microscopy (HRTEM). Furthermore, both the temperature and the pH value influence on the products were investigated.     

有机-无机杂化的钼砷酸盐的水热合成和性质

通过水热法合成了由As-Mo-O簇和Cu~I有机单元构筑而成的钼砷酸盐{[Cu~I(2, 2′-bipy)_2]_3[As(OH)Mo_4O_(14)(OH)]·2H_2O}_(2 )(1)(bipy=bipyridine),并用元素分析、红外光谱和X射线单晶衍射对其进行了定性.1属于单斜晶系,P2(1)/c空间群.1中的多阴离子[As(OH)Mo_4O_(14)(OH)]~(3-)是有四个交替的共面的和共边的{MoO_6}八面体组成,在这些八面体上有一个{AsO_2(OH)}单元.     

Disubstituted diphenyldithiophosphates of cadmium: synthesis,characterization, and single-crystal X-ray structure

A series of new disubstituted diphenyldithiophosphate complexes of cadmium [{(ArO)₂PS₂}₂Cd] (9–12) have been isolated in aqueous media while their donor stabilized adducts [{(ArO)₂PS₂}₂Cd·2C₅H₅N] (13–16) [(Ar = 2,4-(CH₃)₂C₆H₃, 2,5-(CH₃)₂C₆H₃, 3,4-(CH₃)₂C₆H₃ and 3,5-(CH₃)₂C₆H₃)] have been isolated in chloroform. These newly synthesized complexes were characterized by elemental analyses, IR and NMR (¹H, ¹³C and ³¹P) spectroscopic analyses. The dithiophosphate ligands are coordinated bidentate to the cadmium ion via the two thiolate sulfurs. The compounds [{(3,5-CH₃)₂C₆H₃O}₂PS₂HNEt₃] (4) and [{(3,5-CH₃)₂C₆H₃O}₂PS₂]₂Cd(NC₅H₅)₂ (16) crystallize in the monoclinic system with space group P2₁/c. Single-crystal X-ray analysis of 4 reveals that phosphorus of the anion is tetrahedrally bonded to two S and two O atoms. The structure is stabilized by cation–anion N–H?S intermolecular hydrogen bond interactions. In 16, two diphenyldithiophosphate ions are bidentate with both sulfurs coordinated to cadmium. Each forms a four-membered chelate ring in the equatorial plane. Two pyridines are axially coordinated to cadmium leading to octahedral geometry. The thermal properties of this complex have also been examined by combined DTA/DTG thermal analyses.     

Nature of propene chemisorption centers on molybdenum trioxide

As shown by temperature-programmed desorption (TPD), the quantity of reversibly chemisorbed propane on MoO₃ passes through a maximum depending on the degree of surface reduction. Using the ESR method, it is shown that the centers of propene chemisorption do not contain Mo⁵⁺ ions but presumably isolated Mo⁴⁺ ions.

---

, MoO₃ . , Mo⁺⁵. , Mo⁺⁴.

     

Morphology-controllable synthesis of pyrene nanostructures and its morphology dependence of optical properties

Morphology-controllable synthesis of various pyrene nanostructures from nanoparticles to short nanorods and nanowires (long nanorods) was achieved by a simple self-assembly method. In this approach, aqueous sodium dodecyl sulfate (SDS) micelles were used as templates to direct the self-assembly of the pyrene molecules into nanorods. It was found that changing the concentration ratio of the pyrene to SDS molecules could be employed to control the aspect ratio (length to diameter) of the pyrene nanostructures from 1 to 50 or higher. Moreover, the dimensional variation was accompanied by changes of their optical properties. With the increase of the aspect ratio, the characteristic fluorescence of the isolated pyrene molecules was suppressed and concurrently replaced by the excimer emission of the pyrene nanostructures. A blue-shift was observed in the excimer emission peaks as the length of the nanorods increased. The growth mechanism and the change in optical properties of these pyrene nanostructures were discussed in detail.     

Novel multilamellar mesostructured molybdenum oxide nanofibers and nanobelts: synthesis and characterization

One-dimensional molybdenum oxide nanostructures with layered mesostructures were prepared directly from commercial bulk MoO3 crystals by a surfactant-templated hydrothermal process. X-ray diffraction, scanning electron microscopy, transmission electron microscopy, infrared spectra, and thermal analyses have been used to characterize the obtained molybdenum oxide nanomaterials. By use of cetyltrimethylammonium bromide as the structure-directing template, novel molybdenum oxide nanofibers with triple interlayer distances of 2.84, 2.66, and 2.46 nm have been obtained. The nanofibers have diameters of 20-100 nm and length up to 20 microm. The growth of multilamellar molybdenum oxide nanofibers can be interpreted by the combination of surfactant/inorganic self-assembly process and host/guest intercalation chemistry. On the basis of the X-ray diffraction and infrared results, a possible arrangement of surfactant in the interlayer space of molybdenum oxide by bilayer micelles with different tilt angles has been proposed. In addition, the thermal stability of surfactant has been improved by intercalation. Moreover, molybdenum oxide nanobelts with two kinds of interlayered structures were also produced in the presence of n-alkylamines (n = 12, 14, 16, and 18) following a similar method, these nanobelts show length up to more than 10 microm, width ranging between 200 and 600 microm, and width-to-thickness ratios of about 3-12. A linear relationship is observed between the interlayer distance and the number of carbon atoms in n-alkyl chains.     

Selective synthesis and characterization of single-crystal silver molybdate/tungstate nanowires by a hydrothermal process

Selective synthesis of uniform single crystalline silver molybdate/tungstate nanorods/nanowires in large scale can be easily realized by a facile hydrothermal recrystallization technique. The synthesis is strongly dependent on the pH conditions, temperature, and reaction time. The phase transformation was examined in details. Pure Ag(2)MoO(4) and Ag(6)Mo(10)O(33) can be easily obtained under neutral condition and pH 2, respectively, whereas other mixed phases of Mo(17)O(47), Ag(2)Mo(2)O(7,) Ag(6)Mo(10)O(33) were observed under different pH conditions. Ag(6)Mo(10)O(33) nanowires with uniform diameter 50-60 nm and length up to several hundred micrometers were synthesized in large scale for the first time at 140 degrees C. The melting point of Ag(6)Mo(10)O(33) nanowires were found to be about 238 degrees C. Similarly, Ag(2)WO(4), and Ag(2)W(2)O(7) nanorods/nanowires can be selectively synthesized by controlling pH value. The results demonstrated that this route could be a potential mild way to selectively synthesize various molybdate nanowires with various phases in large scale.     

Thermometric titration of some molybdates,molybdic acid,and molybdenum trioxide

A thermometric titrator equipped with differential thermistor is used for the titration of molybdenum in sodium molybdate, potassium molybdate, magnesium molybdate, tetramethylammonium molybdate, and tetraethylammonium molybdate, based on their reactions with hydrochloric acid, and in ammonium paramolybdate, molybdic acid, and molybdenum trioxide, based on their reactions with sodium hydroxide. Orthomolybdates and ammonium paramolybdate were determined in the 0.5–0.005 M range; sufficient solid molybdic acid or molybdenum trioxide was taken to give a final 0.01–0.5 M solution in 20 ml of water. The method is simple and very quick. The standard deviation varies from 0.5 to 1.5% depending on the amount of sample taken.     

Self-templated synthesis of single-crystal and single-domain ferroelectric nanoplates

Free-standing single-crystal PbTiO(3) nanoplates were synthesized by a facile hydrothermal method. A "self-templated" crystal growth is presumed to lead to the formation of the PbTiO(3) nanoplates, which have ferroelectric single-domain structures, whose polarization areas can be manipulated by writing and reading. The nanoplates are also effective catalysts for the oxidation of carbon monoxide.     

Simultaneous determination of traces of impurities in high-purity molybdenum and molybdenum trioxide by coprecipitation and inductively coupled plasma-atomic emission spectrometry

Summary Inductively coupled plasma-atomic emission spectrometry (ICP-AES) has been developed for a simultaneous determination of traces of non-hydride-forming elements in high-purity Mo and molybdenum trioxide. Coprecipitation of diverse elements with lanthanum hydroxide is used to separate them from the Mo matrix and for concentration. Effects of pH and amount of La on the recoveries of diverse elements are discussed. Ten elements (Co, Cr, Cu, Fe, Mn, Ni, Ti, V, Zn, and Zr) are quantitatively recovered and determined. Matrix-matched calibration solutions are used for the determination.