A new ozone denuder for aerosol sampling based on an ionic liquid coating

A new ionic liquid 1-octyl-3,5-dimethylpyridinium iodide ([O35LUT]⁺[I]⁻) was synthesized and utilized as coating for an ozone denuder device based on a high-volume aerosol sampler (30 m³ h⁻¹). Particle transmission of the denuder was studied, and over 99% of particles ranging from 10 to 2,500 nm were transmitted. The device, containing 4.66 g of ionic liquid, was used outdoors, under dry and damp atmospheric conditions. In order to expose the device to an average concentration of 120 ppbv (240 μg m⁻³) of ozone in air, an additional production of ozone was directly injected into the denuder. Under these conditions, over 97% of ozone was removed for approximately 120 h (5 days). Therefore, iodide-based ionic liquids can be used as a new alternative to conventional denuder coatings in order to reduce artifacts occurring during sampling of particulate matter. Future applications are not limited to ozone removal for specific aerosol sampling methods.     

A new liquid crystal compound based on an ionic imidazolium salt

The preparation of 1,3-bis-(4-dodecyloxy-phenyl)-3H-imidazol-1-ium trifluoro-methanesulfonate is described from the 4-dodecyloxy phenylamine derivative. This new imidazolium salt exhibits a lamellar liquid crystal mesophase between 119 and 172 °C. The Smectic A phase has been characterised by polarising optical microscopy, differential scanning calorimetry and X-ray diffraction. In addition the lamellar crystallographic structure obtained on single crystal is reported and corroborated the self-assembly of molecules in the mesomorphic state.     

A greener electrochromic liquid crystal based on ionic liquid electrolytes

An electrochromic liquid crystal (ECLC) material composed of only liquid crystal (LC) and ionic liquid (IL) was developed. The LC containing the substituted diphenylacetylene serves as electrochromic (EC) material to realise transmittance and colour change under the direct current (DC) field, while the IL with the designable cation and anion served as electrolyte. Herein, a series of IL electrolytes was screened to investigate how IL tunes the electro-optic performance of the ECLC cell. By testing the electrochemistry window of ILs in EC cells, IL with the [NTf₂]^? anion shows adequate electrochemical stability when the EC material undergoes oxidation and reduction. The electro-optic performance of ECLC containing 1-ethoxy-4-[2-(4-pentylphenyl) ethynyl]-benzene (PEB) and IL was then evaluated by UV-vis spectrometry under the control of an electrochemical work station. Compared with other PEB-IL, PEB-[Bmim][NTf₂] with [Bmim][NTf₂] electrolyte shows a satisfactory transmittance at low operating voltage. Furthermore, Pd NPs in situ formed in [Bmim][NTf₂] reduced the EC potential and improved the light scattering of the ECLC cell. In this work, we also designed a bifunctional device based on polymer dispersed liquid crystal (PDLC) that hosts electrochromic guest molecules, and analysed the electro-optical and electrochromic properties of LC electrolyte mixtures, in order to gain control of the incident daylight and glare in building and automotive applications.     

Supported imidazolium ionic liquid phases: A new material for solid-phase extraction

This study reports a material that is based on the concept of ionic liquid analogue: a slightly crosslinked polymer-supported imidazolium trifluoroacetate salt (IL-CF₃COO⁻) that favorably combines the properties of ionic liquids (ILs) and the advantages of a solid support.The ionic liquid-supported material was evaluated for the first time as a solid-phase extraction (SPE) sorbent for selectively and quantitatively extracting pharmaceuticals from aqueous samples.The novel IL-CF₃COO⁻ was evaluated under reversed-phase (RP), weak anion exchange (WAX), strong anion exchange (SAX) and strong cation exchange (SCX) SPE procedures, and we found that SAX conditions are the most suitable for investigating the behaviour of the IL-CF₃COO⁻ material. Under SAX conditions, the IL-CF₃COO⁻ material was capable of selectively and quantitatively extracting a group of acidic compounds from aqueous samples, while washing basic analytes that were also present in the sample.The SPE method using IL-CF₃COO⁻ material was used to analyse 1000 ml of different aqueous samples (ultrapure, tap and river) with complete recovery of the acidic compounds studied. Moreover, the method provided clean chromatogram and high recoveries when percolating complex real samples, such as 1000 ml of river water and 250 ml of effluent wastewater from a sewage treatment plant spiked at low levels with the analytes studied.     

Anion-selective electrodes based on ionic liquid membranes: effect of ionic liquid anion on observed response

A systematic study of the behavior of ion-exchanger anion-selective electrodes prepared from seven different trihexyltetradecylphosphonium ionic liquids (ILs) was performed. The effective ion-exchange capacity of prepared ion-selective electrodes (ISEs) increased with decreasing IL anion lipophilicity, and analyte anion response slopes became more Nernstian concomitantly. With ILs having the most lipophilic constituent anions, incorporation of tridodecylmethylammonium chloride into membranes significantly enhanced responses toward all ions. However, ILs based on bis(trifluoromethylsulfonyl)imide and dodecylsulfate maintained sub-Nernstian responses upon such addition apparently due to their ability to coordinate cations. Electrodes prepared with high IL content displayed regions of super-Nernstian response, which could be eliminated by reducing percent of IL in the membrane; percentages at which optimal linear range was achieved also followed a trend with decreasing constituent IL anion lipophilicity. While selectivities of all electrodes followed the Hofmeister pattern, selectivity coefficient ranges generally were narrower than observed with traditionally plasticized ISEs, and selectivities for more hydrophilic analytes were improved slightly in ILs containing the most hydrophilic constituent anions.     

A novel ionic liquid based on small size cation

An ionic liquid material containing small size cation was synthesized and its composition and structure was determined by FT-IR, 1H NMR, 13C NMR and element analysis. However, its physical properties such as melting point, viscosity, conductivity, etc. were measured and the results show that the novel ionic liquid is composed of small cation with highly symmetry and larger anion which is very rare among the reported ionic liquid family.     

Solvent systems for countercurrent chromatography: an aqueous two phase liquid system based on a room temperature ionic liquid

A new aqueous two phase liquid system (ATPS) based on the ionic liquid 1-butyl-3-methyl imidazolium chloride (BMIM Cl), potassium dibasic phosphate (K(2)HPO(4)) and water was recently proposed in the literature. The full phase diagram of this ATPS was prepared and some tie lines were fully determined. It was compared to classical ATPSs based on polyethylene glycol with an average molecular mass of 1000 (PEG 1000) and 10,000 (PEG 10000) and K(2)HPO(4). Two countercurrent chromatography (CCC) columns, a hydrostatic Sanki and a J type hydrodynamic CCC columns were used to test the liquid phase retention of these ATPSs in all possible configurations. It was found that the BMIM Cl ATPS liquid phases were much easier to retain in the two CCC columns than the PEG 1000 ATPS phases. Using protein and alcohol solutes, it was established that the BMIM Cl ATPS has a polarity completely different from that of the PEG 1000 ATPS. For example, ovalbumin partitions equally between the two phases of the PEG 1000 ATPS (K(D)=1.4) when it is completely located in the BMIM Cl upper phase of the ionic liquid ATPS (K(D)=180). The discrimination factor of the ionic liquid system and its intrinsic hydrophobicity were respectively found three times higher and ten times lower than the respective values of the PEG 1000 ATPS.     

A new disposable ionic liquid based coating for headspace solid-phase microextraction of methyl tert-butyl ether in a gasoline sample followed by gas chromatography-flame ionization detection

A new ionic liquid (IL) based solid-phase microextraction (SPME) fiber was investigated and used for headspace (HS) extraction of methyl tert-butyl ether (MTBE) in a gasoline sample. Using the new IL coated HS-SPME fiber with the combination of gas chromatography-flame ionization detection (GC-FID); sub-to-low μg L⁻¹ concentrations of MTBE were detected. Four different ILs including 1-butyl-3-methylimidazolium tetraflouroborate ([C₄C₁IM] [BF₄]), 1-octyl-3-methylimidazolium tetraflouroborate ([C₈C₁IM] [BF₄]), 1-octyl-3-methylimidazolium hexaflourophosphate ([C₈C₁IM] [PF₆]) and 1-ethyl-3-methylimidazolium ethylsulphate ([C₂C₁IM] [ETSO₄]) were synthesized and examined for extraction, preconcentration and determination of MTBE. It was observed that [C₈C₁IM] [BF₄] showed the highest extraction efficiency and possessed the best extractability for MTBE. The fiber coating takes up the compounds from the sample by absorption in the case of liquid coatings. The calibration graph was linear in a concentration range of 1-120 μg L⁻¹ (R² > 0.994) with the detection limit of 0.09 μg L⁻¹ level. The new IL-coated fiber was applied successfully for the determination of MTBE in a gasoline sample with good recoveries between 90 and 95%.     

A new fluorimetric method for the determination of formaldehyde in air based on the liquid droplet sampling technique

A new, simple, sensitive, selective and in-field fluorimetric method for the determination of formaldehyde is proposed. The reaction of formaldehyde with hydralazine in acidic medium, heating on a boiling water-bath for 25 min, produces s-triazolo[3,4-a]phthalazine (Tri-P). The fluorescence intensity of the product formed (Tri-P) was determined at lambda em = 389 nm with lambda ex = 236 nm. The fluorescence intensity is linear over a formaldehyde concentration range of 1.2-33.0 micrograms l-1. The proposed method was applied successfully to the determination of formaldehyde sampled from the atmosphere using the liquid droplet technique. Formaldehyde vapour in a wind tunnel was produced by a mean of permeater. A linear curve was obtained between the concentration in the wind tunnel and that in the droplet. The detection limit for formaldehyde was 2.0 micrograms l-1 with RSDs varying from 3 to 12% in ambient air, using a droplet correction solution (boric acid and hydralazine). The effect of interfering substances on the determination shows that most cations and anions did not interfere. The results obtained were satisfactory compared with a reference method.     

Benzimidazolyl based Schiff base palladium complex in an ionic liquid: an effective combination for Suzuki coupling

A new benzimidazole based Pd(II) Schiff base complex was prepared and its catalytic activity was evaluated for Suzuki cross-coupling reactions in ethyl-methyl imidazolium hexafluorophosphate [EMIM PF₆] ionic liquid at ambient temperature. The system provides a stable and reusable method for coupling reactions. Optimization for suitable reaction conditions were studied with respect to the effect of catalyst concentration, effects of additives, solvent and substituents on boronic acid. Good to excellent yields were achieved using a modest amount of the catalyst. The reaction time was less and the yield was more compared to previously reported results. In addition, the catalyst can be easily reused and recycled for six times without much loss in activity; this is an example of sustainable and green methodology.     

Heterogeneous uptake of ozone on reactive components of mineral dust aerosol: an environmental aerosol reaction chamber study

We have undertaken a kinetic study of heterogeneous ozone decomposition on alpha-Fe2O3 (hematite) and alpha-Al2O3 (corundum) aerosols under ambient conditions of temperature, pressure, and relative humidity in order to better understand the role of mineral dust aerosol in ozone loss mechanisms in the atmosphere. The kinetic measurements are made in an environmental aerosol reaction chamber by use of infrared and ultraviolet spectroscopic probes. The apparent heterogeneous uptake coefficient, gamma, for ozone reaction with alpha-Fe2O3 and alpha-Al2O3 surfaces is determined as a function of relative humidity (RH). The uptake of ozone by the iron oxide surface is approximately an order of magnitude larger than that by the aluminum oxide sample, under dry conditions. At the pressures used, alpha-Fe2O3 shows clear evidence for catalytic decomposition of ozone while alpha-Al2O3 appears to saturate at a finite ozone coverage. The measured uptake for both minerals decreases markedly as the RH is increased. Comparison with other literature reports and the atmospheric implications of these results are discussed.     

Electrochemical sensor for bisphenol A based on a nanoporous polymerized ionic liquid interface

The ionic liquid 1-butyl -3-[3-(N-pyrrole)-propyl]imidazolium tetrafluoroborate was employed to fabricate a glassy carbon electrode (GCE) modified with a porous film of a polymerized ionic liquid. The resulting film electrode was treated with sodium dodecyl sulfonate solution to exchange the terafluoroborate anions by dodecyl sulfonate groups. This was confirmed by X-ray photoelectron spectroscopy. The morphology of the modified GCE was characterized by scanning electron microscopy and revealed a nanoporous surface. The electrochemical properties of this film electrode were studied by electrochemical impedance spectroscopy using the hexacyanoferrate(II/III) system as an electroactive probe. The response to bisphenol A was investigated by voltammetry. Compared to the unmodified GCE, the oxidation potential is positively shifted, and the oxidation peak current is strongly increased. Experimental conditions were optimized and resulted in an oxidation peak current that is linearly related to concentration of bisphenol A in the 10 nM to ~ 10 μM range. The detection limit is 8.0 nM (at S/N?=?3). The electrode was successfully applied to the determination of bisphenol A in leachates of plastic drinking bottles, and its accuracy was verified by independent assays via HPLC.

基于双醛基功能化离子液体构建电化学免疫传感器

合成了含双醛基的离子液体,此离子液体一端的醛基与修饰在电极表面的氨基发生共价键作用,将离子液体修饰在电极表面,另一端的醛基可用来固定抗体,构建电化学免疫传感器,实现对心肌肌钙蛋白I(cTnI)的检测。离子液体通过共价键作用固定在电极表面,不仅减少了从电极表面向检测溶液的渗透,提高传感器的稳定性,而且还可以直接固定抗体,不需要使用其他交联试剂;同时,离子液体可增强传感界面的导电性,提高传感器的灵敏度。在优化的实验条件下,传感器的线性范围为0.1~40 ng/mL,检出限为0.06 ng/mL。     

Supramolecular ionic liquid based on graphene oxide

For the purpose of preparing liquefied graphene oxide (GO), a process consisting of sulfonation with sodium sulfanilic acid and ionization with bulky amine-terminated Jeffamine? was designed and performed. The obtained hybrid fluid is actually a supramolecular ionic liquid (SIL) with sulfonated GO as the central anions and the terminal ammonium groups of Jeffamine? as the surrounding cations. The successful grafting of the GO sheets with Jeffamine?via an ionic structure was verified and the morphology of the SIL was characterized. The SIL based on GO (GO-SIL) exhibits excellent solubility and amphiphilicity. The rheological measurements confirm the essential viscoelasticity and the liquid-like behavior of GO-SIL. The present GO based SIL suggests promising applications in the fabrication of various GO or graphene based composite materials. In addition, the new functionalization method may guide the future work on acquiring derivatives with tunable properties by simply changing the bulky canopy.     

Stable cycling of graphite in an ionic liquid based electrolyte

1-Ethyl-3-methylimidazolium-bis(trifluoromethylsulfonyl)imide (EMI-TFSI) has been shown to reversibly permit lithium intercalation into standard graphite when vinylene carbonate is used in small amounts as an additive.     

Biosensor for chlorogenic acid based on an ionic liquid containing iridium nanoparticles and polyphenol oxidase

A biosensor based on the ionic liquid, 1-n-butyl-3-methylimidazolium hexafluorophosphate containing dispersed iridium nanoparticles (Ir-BMI.PF₆) and polyphenol oxidase was constructed. This enzyme was obtained from the sugar apple (Annona squamosa), immobilized in chitosan ionically crosslinked with oxalate. The biosensor was used for determination of chlorogenic acid by square wave voltammetry. The polyphenol oxidase catalyzes the oxidation of chlorogenic acid to the corresponding o-quinone, which is electrochemically reduced back to this substance at +0.25 V vs. Ag/AgCl. Under optimized operational conditions the chlorogenic acid concentration was linear in the range of 3.48 × 10⁻⁶ to 4.95 × 10⁻⁵ mol L⁻¹ with a detection limit of 9.15 × 10⁻⁷ mol L⁻¹. The biosensor was applied in the determination of chlorogenic acid in organic and decaffeinated coffee and the results compared with those obtained using the capillary electrophoresis method. The recovery study for chlorogenic acid in these samples gave values of 93.2-105.7%.     

A new sampling technique for reversed-phase liquid chromatography/fourier-transform infrared spectrometry

A systematic study of the utility of stainless-steel wire nets (SSWN) as a substrate for infrared sampling is described. The nets can be used with polar solvents including water, as well as non-polar solvents, without harming the surface. The use of the SSWN simplifies interfacing between a reversed-phase liquid chromatograph (l.c.) and a Fourier-transform infrared spectrometer. It is used as a l.c. detector cell by collecting the effluent from l.c. on the cell itself. The technique is tested extensively with carbaryl as sample and is applied successfully to the detection of a pharmaceutical mixture (phenacetin, caffeine and aspirin) separated by reversed-phase l.c. with a (3:2, v/v) methamol/water mobile phase.     

Nanocomposite ion gels based on silica nanoparticles and an ionic liquid: ionic transport, viscoelastic properties, and microstructure

The dispersion of silica nanoparticles made an ionic liquid, 1-ethyl-3-methyl imidazolium bis(trifluoromethanesulfonyl)amide ([C(2)mim][NTf(2)]), gelled even by the addition of 2-3 wt %, due to the formation of interconnected particulate silica networks in [C(2)mim][NTf(2)]. The ionic transport and viscoelastic properties of these nanocomposite ion gels were investigated in relation to the microstructure. Despite their solid-like behavior, the nanocomposite ion gels exhibited a high ionic conductivity of approximately 10(-2) S cm(-1) at 30 degrees C, which is comparable to that of neat [C(2)mim][NTf(2)]. Intriguing viscoelastic responses, such as shear-thinning and shear-induced sol-gel transitions, were found in all of the nanocomposite ion gels. By adjusting the silica concentration, the elastic modulus ( G') could be precisely controlled in a range of more than 3 orders of magnitude and reached approximately 10(6) Pa without a considerable decrease in the ionic conductivity; the characteristic viscoelastic response was also maintained. For the aggregation mechanism in [C 2 mim][NTf(2)], the reaction-limited cluster aggregation (RLCA) model was proposed by rheology and light scattering measurements.