O-掺杂石墨电极VO2+/VO2+电对反应活性研究

采用氧气等离子体处理石墨电极表面,实现氧及含氧官能团的掺杂,以改善VO2+/VO2+电对的反应活性.FT-IR和EDS测试结果表明,氧气等离子体处理石墨表面引入了含氧官能团,从而提高了VO2+/VO2+电对的电化学活性.在本文实验条件下20 min等离子体处理的电极活性最好,8 mA.cm-2电流密度恒流充放电,石墨电极VO2+/VO2+电对库仑效率达到91%,比未处理电极的库仑效率提高了19%.     

氧官能团MXenes用于电催化合成氨的理论筛选（英文）

电催化合成氨技术以绿色可再生的电能为驱动力,通过在室温条件下改变外加电压来克服速控步能垒,被认为是一种取代哈伯工艺的潜在选择.然而,该技术存在法拉第效率较低、氨气产率不高等问题.因此,设计高效的电合成氨催化剂是目前亟待解决的关键问题.氧官能团的二维过渡金属碳化物和氮化物(MXenes)由于具有独特的几何结构、高导电性和表面易调变等特点,在全水解、碳转化、氧还原或固氮等电催化过程中应用十分广泛.其中,表面氧官能团不饱和覆盖的MXenes材料的电催化合成氨性能较好,这是因为适量的氧空位能够调节活性中心的电荷分布,从而优化关键中间体的结合强度;同时,氧空位的存在为反应提供了足够的活性位点.然而,氧官能团MXenes家族庞大,种类众多,如何从中筛选出合适的合成氨电催化剂尚且缺乏理论指导.本文设计了一系列氧官能团的二维过渡金属碳化物和氮化物(MXenes)作为合成氨电催化剂,并通过密度泛函理论从稳定性、选择性和活性角度出发提出了一套较完善的筛选流程.以纯MXenes表面覆盖17/18氧官能团所需的极限电位来判断氧官能团MXenes的稳定性.通过对催化剂上氮气分子和氢原子的吸附行为进行比较来证明其...     

热处理改性活性炭纤维的脱硫活性

 考察了在O2和水蒸气存在下高温热处理对活性炭纤维（ACF）催化转化SO2为H2SO4的活性的影响,关联了ACF表面含氧官能团的种类及数量与热处理后ACF的脱硫活性之间的关系．结果表明,在最佳热处理温度下以CO形式释出的含氧官能团的总量决定了ACF的脱硫活性,而以CO2形式释出的含氧官能团未对提高ACF的脱硫活性做出贡献．通过采用不同的氧化剂改变ACF表面含氧官能团的种类和数量,进一步证实了热处理过程中释出的CO量与ACF的脱硫活性之间成正比关系．     

电位调控制备还原氧化石墨烯的电催化性能研究

本文通过控制电位还原氧化石墨烯,可控制备不同含氧官能团的石墨烯纳米材料。以多巴胺、[Fe(CN)_6]~(3-)、NADH为电活性探针,研究了石墨烯表面含氧官能团、缺陷、表面荷电性质以及导电性等对石墨烯电催化性能的影响。研究发现,低还原程度的氧化石墨烯表面含有大量缺陷和丰富的官能团,能够促进多巴胺自催化反应,也有利于K_3[Fe(CN)_6]在电极表面的电子转移;随着氧化石墨烯还原程度提高,其导电性逐渐得到改善,且其表面官能团和缺陷位点数量逐渐减少,对NAD~+的吸附变弱,因而能促进NADH发生电催化氧化。     

磁场辅助毛细管电色谱

磁场辅助毛细管电色谱是液相色谱研究领域中出现的新技术．它利用外加磁场的引力将置于毛细管内的具有磁响应性的硅胶微球或四氧化三铁微球固定在管内任意位置．磁场固定微球聚集体既可用作填充柱,直接用于电色谱分离;也可用作柱筛,用于填装由商品色谱填料组成的色谱柱．这一技术的优势在于制备简便易行,柱管可以再生使用,适合于微流控芯片上柱筛或柱床的制作．本文简要评述磁场辅助毛细管电色谱的进展,包括磁性色谱填料的制备,磁场固定柱床电色谱,磁性柱筛电色谱及毛细管柱内柱结构参数的测定等方面．     

N'-亚硝基去甲烟碱在沸石分子筛上的程序升温表面反应

使用程序升温表面反应技术，首次研究了沸石对于分子直径远大于其孔径的烟 草特有亚硝胺代表物N'-亚甲烟碱的（NNN）催化裂解作用．NNN依然能被沸石吸附 和催化裂解；沸石孔径和表面酸位都是影响催化分解N因素．计算表明：NNN很可能 以N-N-O官能团嵌人沸石孔道的形式进行吸附．介孔分子筛被首次用于催化裂催化 活性远远高于微孔沸石．     

N'-亚硝基去甲烟碱在沸石分子筛上的程序升温表面反应

使用程序升温表面反应技术，首次研究了沸石对于分子直径远大于其孔径的烟 草特有亚硝胺代表物N'-亚甲烟碱的（NNN）催化裂解作用．NNN依然能被沸石吸附 和催化裂解；沸石孔径和表面酸位都是影响催化分解N因素．计算表明：NNN很可能 以N-N-O官能团嵌人沸石孔道的形式进行吸附．介孔分子筛被首次用于催化裂催化 活性远远高于微孔沸石．     

基于双层纳米金修饰的高灵敏电位型乙肝表面抗原免疫传感器研究

基于电沉积和层层自组装技术，提出了一种新的生物分子固定化方法，研制成一种高灵敏电位型乙肝表面抗原免疫传感器。利用L-半胱胺酸（LCys）的双官能团结合双层纳米金，从而通过比表面积大，生物相容性好的纳米金胶吸附大量抗体，同时用聚乙烯醇缩丁醛（PVB）薄膜的笼效应把乙肝表面抗体（HBsAb）和纳米金固定在玻碳电极上，从而制得了高灵敏度、高稳定性的电位型免疫传感器。采用循环伏安法（CV）对电极的层层自组装过程进行了考察，并对该免疫传感器的性能进行了详细的研究。该免疫传感器线性范围是8．5～256．0ng／mL，线性相关系数为0．9978，灵敏度为89．0，检出限为3．1ng／mL。已用于病人的血清样品分析。     

丁基胺丙基硅胶毛细管整体柱的制备及其电色谱性能研究

采用溶胶-凝胶技术制备了丁基胺丙基硅胶毛细管整体柱,此整体固定相表面同时含有能产生阳极的电渗流的仲胺官能团和产生疏水作用的正丁基和丙基官能团。对所制备的整体柱电色谱性能进行了详细的表征和分析。考察了流动相pH值对电渗流的影响;对烷基苯同系物、有机酸酸性化合物和苯胺类碱性化合物保留行为进行了研究,并对其可能的保留机理进行了探讨。实验结果表明,对于中性化合物的保留机理主要基于反相作用;而对于酸性化合物的保留行为则是基于混合模式作用机理,即除了电泳作用外,还包括阴离子交换和疏水作用。碱性化合物在丁基胺丙基硅胶毛细管整体柱上的峰形较好,没有明显的峰拖尾现象。     

乙烯渣油沥青基活性炭纤维和粘胶基活性炭纤维的表面性质与脱硫活性

研究了在O2和H2O存在下,乙烯渣油沥青基活性炭纤维(ETPACF)和粘胶基活性炭纤维(CelluloseACF)的脱硫活性.结果表明,在比表面积相近的情况下,ETPACF的脱硫活性明显低于CelluloseACF,这可归因于后者具有较强的吸附和催化氧化SO2能力及较大的吸水量,尤其是具有较强的催化氧化SO2的能力,这些能力又与其表面含有含氮官能团以及某些含氧官能团有关,因此ACF的表面官能团对其脱硫活性影响很大.     

Accumulation of phenyl boronic acid-carrying telomers on a gold surface

By coupling two equivalents of N,N-diethyldithiocarbamoylmethylbenzoic acid succinimidyl ester with cystamine dihydrochloride, a disulfide-carrying compound (Cys-BDC) was prepared and used as iniferter (a compound which pursues initiation, chain transfer, and termination) in the telomerization of N,N-dimethylacrylamide and 3-acrylamidophenylboronic acid. The telomerization was carried out in the presence of N,N,N',N'-tetraethylthiuram disulfide under photoirradiation at 365 nm. An aqueous solution of the telomer obtained showed responsiveness to both temperature and sugars as confirmed by the turbidity measurements. The telomer formed a self-assembled monolayer (SAM) on a gold surface as confirmed by both cyclic voltammetry (CV) and ellipsometry. The recognition of sugar residues by the telomer SAM constructed on the gold electrode was detected by the CV measurements. The usefulness of the iniferter to prepare various telomer-carrying SAMs with bio-related functions was strongly suggested.     

Joint voltammetric determination of dopamine and uric acid

Electrocatalytic activities of gold particles deposited onto an electrode unmodified and modified with a self-organized monolayer of cystamine in oxidation of dopamine and uric acid were compared. The possibility of joint determination of dopamine and uric acid on an electrode modified with self-organized monolayer of cystamine with gold nanoparticles was examined.     

Fishing of beta-amylase with a SAM of alpha-cyclodextrin-poly- (ethylene glycol) conjugate

Alpha-cyclodextrin (alpha-CD) with an amino group was conjugated to an alpha, omega-dicarboxylated poly(ethylene glycol) (PEG). The inhibition constant (Ki) of the alpha-CD-PEG conjugate for the catalysis by beta-amylase was larger than that of alpha-CD, due to a steric obstruction of the PEG moiety to the binding of alpha-CD moiety to beta-amylase. alpha-CD-PEG was further modified with cystamine (CD-PEG-Cys) or cysteamine methyl disulfide (CD-PEG-MDS), and the disulfide-carrying alpha-CD-PEG was accumulated on a gold surface as a self-assembled monolayer (SAM). The binding of beta-amylase to the alpha-CD-PEG SAM was followed by a decrease in cathodic peak current in the voltammogram of hydroquinone as a probe using a cyclic voltammetry (CV). The beta-amylase bound to the alpha-CD-PEG SAM was desorbed by the addition of free alpha-CD, and the ratio of desorbed beta-amylase from the SAM of alpha-CD-PEG-Cys to the total amount of the enzyme bound to the SAM was 40% whereas that from the alpha-CD-PEG-MDS SAM was 83-85%. The percentage of desorption was increased to 100% by the treatment of the alpha-CD-PEG-MDS SAM-carrying electrode with 2-hydroxyethyldisulfide prior to the immersion in the enzyme solution. Adsorption and desorption processes of beta-amylase to the surface of alpha-CD-PEG-MDS SAM were clearly observed using localized surface plasmon resonance absorption spectroscopy. The binding constant of the enzyme to the surface-confined alpha-CD-PEG was much larger than that to free alpha-CD, probably due to a large local concentration of the alpha-CD moiety on the gold surface.     

维生素B_1自组装膜修饰金电极对多巴胺、尿酸的电催化作用

用维生素B1(VB1)在金电极上进行自组装,制备了VB1自组装膜修饰金电极(VB1-Au/SAMs/CME).利用循环伏安法初步研究了此自组装单分子膜修饰电极的电化学行为.结果表明: VB1在金电极表面具有特性吸附.以\3-/ 4-氧化还原电对为探针,考察了VB1自组装膜修饰金电极的电化学性质, VB1自组装膜的存在对\3-/4-的电子转移具有明显的阻碍作用.研究了多巴胺(DA)和尿酸(UA)在此电极上的电化学行为.实验结果表明, DA和UA在此电极上均可被电催化氧化.差分脉冲伏安(DPV)氧化峰电流与DA浓度在2.0×10-5～4.0×10-4 mol/L范围内呈线性关系;测定UA的线性范围为6.0×10-5～2.2×10-4 mol/L,而且可实现这两种物质的同时测定.     

Electrocrystallization of rhodium clusters on thiolate-covered polycrystalline gold

This study reports on the electrochemical deposition of rhodium metal clusters on a polycrystalline gold electrode, modified with a monolayer of dodecanethiol through self-assembly from solution. The deposition process was investigated using cyclic voltammetry, chronoamperometry, and electrochemical quartz crystal microbalance. It is shown that the presence of the thiol monolayer drastically alters the nucleation and growth mechanism compared with the mechanism on the bare gold electrode. The small uncovered gold domains, located at the imperfections in the thiolate monolayer which are induced by the gold nanoroughness, act as nucleation sites for small rhodium clusters. At longer times, these clusters can outgrow the organic monolayer. The resulting surface morphology was characterized by scanning electron microscopy. Rhodium electrocrystallization on the bare gold substrate resulted in an ensemble of a very large amount of very small clusters that are difficult to distinguish from the gold roughness. In contrast, in the presence of a self-assembled monolayer (SAM) of dodecanethiol covalently attached to the gold electrode, the resulting deposit consisted of an ensemble of hemispherical particles. The size distribution of the rhodium particles obtained by using double step chronoamperometry was compared to the ones obtained with cyclic voltammetry and "classical" chronoamperometry. It is shown by X-ray photoelectron spectroscopy that the SAM is still present after rhodium deposition on the thiolate-covered gold substrate. Because the rhodium clusters are directly attached to the gold substrate and can thus easily be electrified, the resulting interface could be used as a composite electrode consisting of a random array of gold supported rhodium nano/microparticles separated from each other by an organic phase. On the other hand, it is shown that the SAM is easily removed by electrochemical oxidation without dissolving the rhodium clusters and, thus, leaving a different array of rhodium clusters on the gold surface compared with the topography obtained in the absence of the SAM. From this point of view, substrate modification with such "removable" organic monolayers was found to be an interesting tool to tune the nano- or microtopography of electrochemically deposited rhodium.     

Voltammetric Study of Methylene Blue at Thiol SAMs‐Modified Gold Electrodes

The voltammetric behavior of methylene blue (MB) at thiol self‐assembled monolayers modified gold electrodes (SAMs/Au) has been investigated. MB exhibited a redox peak at about ?0.35 V (vs.SCE) in alkaline solution at bare gold electrodes. When the gold electrodes were modified with thiol SAMs, the peak grew due to the accumulation of MB at SAMs. With the solution pH rising, more MB was accumulated, hence the peak height increased, which differed from that at bare gold electrodes. The electrode process at SAMs/Au featured the characteristics of adsorption and/or electrode reaction controlled. The enhancing action of glutathione monolayer (GSH SAM), 3‐mercaptopropionic acid monolayer (3MPA SAM) and other thiol SAMs was compared. Among these, GSH SAM made the MB peak increase more. At GSH SAM/Au, the peak height varied linearly with MB concentration over the range of 2 μM to 400 μM. So this can be developed for the determination of MB and studies concerned. The accumulation behavior caused by GSH SAM and native fish sperm dsDNA was compared. The interaction between DNA and MB was also discussed under this condition.     

A piezoelectric immunoassay based on self-assembled monolayers of cystamine and polystyrene sulfonate for determination of Schistosoma japonicum antibodies

A piezoelectric immunosensor based on an improved immobilization strategy combining self-assembled monolayers (SAM) of cystamine (Cys) and polystyrene sulfonate (PSS) has been developed for the determination of Schistosoma japonicum antibodies (SjAb) in rabbit serum. Cys SAM were first applied to the gold electrode surface of the crystal, serving as a positively-charged base. Schistosoma japonicum antigen (SjAg) was then electrostatically immobilized on the crystal by means of a negatively-charged PSS layer. When sealed by use of an appropriately selected blocking reagent for BSA and normal rabbit serum (NRS), non-specific adsorption could be substantially reduced.The immunosensor was used to determine SjAb in optimized buffer medium with addition of poly(ethylene glycol) (PEG), which served as an immunoreaction enhancer. It was shown experimentally that SjAg immobilized by the Cys-PSS adsorption procedure had higher immunological activity or binding efficiency than those immobilized by the glutaraldehyde (GLU) binding or direct attachment procedures. The immunosensor developed had satisfactory sensitivity and detection limit, and regeneration of the piezoelectric quartz-crystal was easy. Analytical results obtained with infected rabbit serum samples indicated that the proposed immunosensor is a promising alternative for qualitative and quantitative determination of SjAb in clinical diagnosis of infection with Schistosoma japonicum.     

硫辛酸在金电极上自组装成膜动力学研究

自组装单层膜 (ＳＡＭ)应用广泛[1～ 3] 。但对于硫辛酸 (ＴＡ)自组装成膜动力学过程的研究尚未见报道。本研究利用石英晶体微天平 (ＱＣＭ)对ＴＡ自组装成膜过程进行在线监测 ,研究成膜动力学特征 ,并探讨浓度、温度对成膜过程的影响 ,以及在不同ｐＨ值下 ,ＳＡＭ的稳定性 ,推算了不同温度下的速率常数及成膜的活化能。1　实验部分1 1　基本原理通过监测成膜过程中石英晶体微天平 (ＱＣＭ)的振荡频率的变化 ,据Ｓａｕｅｒｂｒｅｙ方程 ,可推知在石英谐振器 (ＱＣＭ)的金电极表面 ,ＴＡ的吸附质量Γ(Γ =Δｍ Ａ ,ｇ ｃｍ2 )与ＱＣＭ的频率…     

Enhanced Electrocatalytic Oxidation of Paracetamol at DNA Modified Gold Electrode

Cysteine monolayer has been assembled onto bare gold electrode (SAM/Au), and subsequently deoxyribonucleic acid (DNA) has been successfully immobilized at the SAM/Au electrode. The thus modified electrode is assigned DNA/SAM/Au. Modification steps of the electrode were followed electrochemically using K₄[Fe(CN₆)] electrochemical marker. Also, the build‐up of the modified electrode composition is followed using EDX and the crystallographic orientation is inspected using XRD. The electrochemical behavior of paracetamol (PC) at DNA/SAM/Au electrode is investigated. Interestingly, the sluggish irreversible behavior of PC at the bare gold electrode is converted to a quasi‐reversible one at DNA/SAM/Au electrode pointing to some interaction between the immobilized DNA and PC. The enhanced electrochemical behavior of PC at modified DNA/SAM/Au electrode is successfully used for a sensitive electrochemical determination of PC. Square wave voltammetry (SWV) was used for this purpose. The concentration of PC was in linear relation with the peak current at the optimum conditions within the range 10.0–110.0 μg mL^?1 with correlation coefficient (R²) of 0.998. Also, the standard deviation (SD) and relative standard deviation (RSD) were calculated and found to be 0.817 and 1.52, respectively, indicating the significance of the present method.     

Studies on Gold Electrode Modified by Alkanethiol SAM

Self-assembled monolayer (SAM) on gold electrode has been extensively studied in electrochemistry. It is a good model for study the electron transfer through the SAM from metal to redox couple in the solution or tethered on the surface of monolayer. For a pinehole-free monolayer, electron tunneling is considered as the mechanism of electron transfer through the film. The detail of the process in electrochemistry is not clear though there are a lot of publications on SAM research. In this paper,the electrochemical behavior of pinehole-free alkanethiol modified SAM electrode was investigated at different potential in the solution containing various concentration Fe(CN)₆^3-/4- ions. It was found that the apparent resistance could be attributed mainly to the resistance of SAM film.