BBO晶体在CPM非稳腔Nd：YAG激光器中的腔内倍频效应

本文报道用BBO晶体作为腔内倍频元件,在带抗共振环的对撞脉冲锁模非稳腔Nd:YAG激光器中实现腔内倍频激光输出,获得倍频能量转换效率为50.4%.理论和实验均证明了该激光器的BBO腔内倍频转换效率高于腔外倍频转换效率.     

飞秒紫外激光脉冲振荡的实验研究

本文讨论了采用空间光脉冲光谱的啁啾特性和选择聚焦透镜焦距相结合的技术大大提高二次谐波转换效率和产生紫外飞秒光脉冲的实验研究.采用一类相位匹配的BBO晶体,当飞秒钛宝石光脉冲平均功率为560mW时,二次谐波输出功率为352mW,二次谐波转换效率高达63%;采用一类相位匹配的LBO晶体时,获得高光束质量的倍频蓝光输出,输出平均功率为170mW,转换效率大于30%.运用LBO倍频产生的蓝光脉冲和剩余的基频光脉冲进行了三次谐波的振荡研究.三倍频晶体采用BBO,通过优化设计倍频光与基频光之间的空间模匹配及精确时间延迟,得到飞秒紫外光输出,输出功率为2mW,中心波长约为280nm,重复率为100MHz.     

Coherent enhancement of broadband frequency up-conversion in BBO crystal by shaping femtosecond laser pulses

An optimal feedback control of broadband frequency up-conversion in BBO crystal is experimentally demonstrated by shaping femtosecond laser pulses based on genetic algorithm, and the frequency up-conversion efficiency can be enhanced by ∼16%. SPIDER results show that the optimal laser pulses have shorter pulse-width with the little negative chirp than the original pulse with the little positive chirp. By modulating the fundamental spectral phase with periodic square distribution on SLM-256, the frequency up-conversion can be effectively controlled by the factor of about 17%. The experimental results indicate that the broadband frequency up-conversion efficiency is related to both of second harmonic generation (SHG) and sum frequency generation (SFG), where the former depends on the fundamental pulse intensity, and the latter depends on not only the fundamental pulse intensity but also the fundamental pulse spectral phase.     

双波长双脉冲激光三次谐波的产生方法

提出双波长双脉冲激光产生三次谐波的方法。波长不同的两脉冲激光束由反射使它们合拢后通过两块非线性的BBO晶体 ,激光脉冲第一次通过BBO晶体产生两波长的二次谐波 (SHG) ,它们由各自的反射镜反射再次通过BBO又产生了二次谐波 ,这两次产生的二次谐波和基波通过用于产生三次谐波的BBO晶体可产生双波长的三次谐波 ,它们由 45°斜置的耦合镜输出。文中分析了满足二次谐波和三次谐波的四个相位匹配的条件 ,该方法也可用于腔内双波长双脉冲的三次谐波激光的产生 ,给出了相应的实验结果。     

Phase matching limitation of high-efficiency second-harmonic generation in both phase- and group-velocity-matched structures

In this paper, we studied efficient second-harmonic generation (SHG) of femtosecond pulses in both phase- and group-velocity-matched structures. Obtained results show that phase matching becomes more critical under conditions required for high levels of conversion efficiency. And the imperfect phase mismatch caused by mismatched group-velocity dispersion (GVD) will limit conversion efficiency as well as bandwidth of generated second-harmonic (SH) pulses. The spectral characteristics of the generated SH pulses and its conversion efficiency in the strong pump regime are investigated in detail. The acceptance bandwidth of nonlinear crystal in the high-efficiency SHG is redefined in the paper, and the definition is much closer to the practical application of design.     

共焦非稳腔中ps激光的内腔倍频

考虑倍频晶体相位匹配接收角（Angular acceptance）对倍频转换效率的影响,设计了正支（p支）共焦非稳腔Nd:YAP锁模激光器。平行光通过晶体实现完全相位匹配。以BBO和KTP作为腔内倍频元件,分别获得80.6%和60.2%的高效倍频转换,及几十mJ的绿光输出。同时实验测定其它有关参数。     

超短脉冲在单块晶体中的三次谐波理论模拟

讨论了群速度失配、自相位调制和交叉相位调制、晶体厚度、基波的频率啁啾等因素对超短脉冲单块晶体的三次谐波转换效率、三倍频光脉冲形状以及频谱的影响.结果表明：群速度延迟使三倍频光脉冲展宽；自相位调制和交叉相位调制会降低转换效率,并使三倍频光脉冲形状发生畸变；晶体厚度对三倍频光脉冲频谱展宽有着较大的影响；合适的基频光频率啁啾可以减小三倍频光脉冲的畸变,并有效地提高三倍频转换效率.     

利用椭圆高斯光束产生266nm紫外连续激光

本文采用商用532 nm激光器作为基频光源,利用偏硼酸钡(β-BBO)晶体进行外腔倍频,实现了266 nm连续激光的高效输出.文中详细模拟了BBO晶体中的束腰形状对倍频效率的影响,仿真和实验结果均表明椭圆高斯光束可以有效改善走离效应,提高倍频转换效率.通过优化蝶形倍频腔,可以使椭圆高斯光束在腔内共振,当1 W基频光输入时可输出约180 mW的266 nm紫外连续激光,倍频转换效率达到18%.     

Correction of walk-off-induced wavefront distortion for continuous-wave laser

We theoretically and experimentally investigate the wave front distortion in critically phase-matched continuous-wave (CW) second harmonic generation (SHG). Due to the walk-off effect in the nonlinear crystal, the generated second harmonic is extremely elliptical and quite non-Gaussian, which causes a very low matching and coupling efficiency in experiment. Cylindrical lenses and walk-off compensating crystals are adopted to correct distorted wave fronts, and obtain a good TEM₀₀ mode efficiently. Theoretically, we simulate the correction effect of 266-nm laser generated with SHG. The experiment results accord well with the theoretical simulation and an above 80% TEM₀₀ component is obtained for 266-nm continuous-wave laser with a 4.8°-walk-off angle in beta barium borate (BBO) crystal.     

Frequency doubling of phase-modulated femtosecond laser pulses in periodically poled and chirped nonlinear crystals

The second harmonic generation (SHG) at a wavelength of 0.8 μm by 50-and 10-fs pulses with and without phase modulation (PM) was systematically studied in LiNbO₃ crystals with regular domain structure and linearly varied domain thickness. The main results were obtained by numerical method, taking into account the difference between group velocities of interacting pulses and the group-velocity dispersion. In the approximation of the given field of the fundamental radiation, an analytical expression was derived for the spectral density of the second harmonic in the periodically poled nonlinear crystal (PPNC) under nonstationary excitation conditions. It was numerically found that the conversion efficiency of about 90% can be achieved by doubling the frequency of 50-fs laser pulses without PM in the LiNbO₃ PPNC. The maximum conversion efficiency for the SHG by PM pulses is achieved at a certain optimum chirp step in the crystal domain length, which depends on both the value and sign of frequency modulation.     

The 266-nm ultraviolet-beam generation of all-fiberized super-large-mode-area narrow-linewidth nanosecond amplifier with tunable pulse width and repetition rate

We report on a compact, stable, all-fiberized narrow-linewidth (0.045 nm) pulsed laser source emitting laser beam with a wavelength of 266 nm, and tunable pulse width and repetition rate. The system is based on all-fiberized nanosecond amplifier architecture, which consists of Yb-doped fiber preamplifiers and a super-large-mode-area Yb-doped fiber power amplifier. The fiber amplifier with a core of 50 μ is used to raise the threshold of the stimulated Brillouin scattering (SBS) effect and to obtain high output power and single pulse energy. Using lithium triborate (LBO) crystal and beta-barium borate (BBO) crystal for realizing the second-harmonic generation (SHG) and fourth-harmonic generation (FHG), we achieve 17 μJ (1.73 W) and 0.66 μJ (66 mW), respectively, at wavelengths of 532 nm and 266 nm and a repetition rate of 100 kHz with pulse width of 4 ns. This source has great potential applications in fluorescence research and solar-blind ultraviolet optical communication.     

增益介质位置对腔外倍频效率的影响

采用MgO掺杂的周期性极化铌酸锂晶体作为非线性晶体,搭建了线性平-凹腔结构的外腔式倍频系统,分析了增益介质和输入耦合镜之间的距离对二次谐波转换效率的影响。实验中,使用光纤耦合二极管泵浦Nd: YVO₄激光器作为基频光源,通过改变增益介质和输入耦合镜的间距,测量了激光器的纵模数量、锁模脉冲稳定性、基频光线宽以及光-光转换效率。实验结果显示,增加增益介质和输入耦合镜之间的距离,可以在一定程度上提升自锁模脉冲的稳定性并有效减小基频光线宽。当泵浦功率较高时,适当增加该间距可以有效提升二次谐波转换效率。     

Polarization-dependent colored conical emission in a quadratically nonlinear medium

Both supercontinuum conical emission (SCCE) and blue-green conical emission (CE) by means of second harmonic generation (SHG) were observed alternately in a β-barium borate (BBO) crystal induced by femtosecond laser pulses with vertical polarization state. Three theoretical models were analyzed to interpret the angular beam of SCCE. The experimental conical angles with different wavelengths in BBO crystal and BK-7 glass can be explained well by nonlinear X-wave model and Cerenkov type phase matching model other than four-wave mixing (FWM) model.     

Enhancement of second harmonic generation by double-pass configuration in barium borate

Double-pass type-I second harmonic generation (SHG) external to a laser cavity is reported for the first time in a BBO crystal resulting in an enhancement of the generated harmonic intensity by a factor of 3.4 from that obtained in the single-pass generation.     

用BBO倍频晶体作为腔内自聚焦元件的自锁模钛宝石激光器

本文首先从二次谐波产生(SHG)过程中的一对耦合波方程出发,在理论上得到了当基波光以接近相位匹配的角度穿过倍频晶体时会产生自聚焦效应,并用类比方法得到了BBO晶体相应的非线性折射率系数.在实验上,据我们所知首次将BBO倍频晶体作为独立自聚焦元件用到了钛宝石激光器中,获得了一台较腔内不加晶体时的锁模阈值明显减小、锁模稳定性明显提高且具有自启动能力的自锁模钛宝石激光器.     

相位失配法实现倍频稳定输出的模拟分析

 对BBO晶体Ⅰ类相位匹配倍频过程和KTP晶体XY平面内的Ⅱ类相位匹配倍频过程进行数值模拟,结果表明：Ⅰ类和Ⅱ类相位匹配倍频过程,都可通过引入适量的相位失配量实现稳定倍频输出;随着相位失配量的增大,实现稳定倍频输出所需的晶体长度都变小,倍频稳定输出起伏变小,倍频转换效率有不同程度的下降;相对于XY平面内的Ⅱ类相位匹配倍频过程,BBO晶体的Ⅰ类相位匹配倍频过程对相位匹配偏离角更敏感,且稳定输出时倍频转换效率更低。     

应用级联倍频方法提高倍频系统输出稳定性研究

提出应用级联倍频方法提高倍频系统输出稳定性,并就该方法的有效性进行了理论分析和模拟计算.分析和计算结果不但证明级联倍频方法能实现倍频系统稳定输出,而且还表明可以通过仔细调节第一块倍频晶体中波矢方向 k 与光轴间夹角、两块倍频晶体间的间隔,能调节改变实现倍频系统最稳输出时所需第二块晶体的理论计算长度,使之与第二块倍频晶体的实际加工长度一致,最终实现系统稳定倍频输出.级联倍频方法在实现高输出稳定性的同时能实现高的倍频转换效率,对应用于光参量啁啾脉冲放大系统的高稳定抽运源系统的设计建造具有重要参考意义. 关键词： 级联倍频 稳定倍频输出 光参量啁啾脉冲放大     

Generation of Broadband Near-Infrared (2–2.5 μm) Radiation from an Optical Parametric Amplifier Driven by a Cr:Forsterite Laser Near Dispersion Anomalies of Tuning Curves

Pulses with a spectral width of 450 nm at a wavelength of 2.2 μm are generated in a parametric amplifier based on a type-I BBO crystal pumped by the second harmonic (620 nm) of a Cr:forsterite laser. Such a broadband radiation is obtained in a specific regime of the group velocity matching near the vertical region of the tuning curve. The generated pulses can be compressed to a duration of about 2.5 optical cycles (34 fs) in a medium with positive group-velocity dispersion.     

Polarization-sensitive quantum optical coherence tomography: Experiment

Polarization-sensitive quantum optical coherence tomography (PS-QOCT) makes use of a Type-II twin-photon light source for carrying out optical sectioning with polarization sensitivity. A BBO nonlinear optical crystal pumped by a Ti:sapphire psec-pulsed laser is used to confirm the theoretical underpinnings of this imaging paradigm. PS-QOCT offers even-order dispersion cancellation with simultaneous access to the group-velocity dispersion characteristics of the interstitial medium between the reflecting surfaces of the sample.     

Measurement of ultrashort laser pulses using single-crystal films of 4-aminobenzophenone

Single-crystal thin-film of an organic second-order nonlinear optical material, 4-aminobenzophenone (ABP), is used to measure the pulsewidth of a Ti-Sapphire laser producing 45 fs pulses at 1 kHz repetition rate, by the non-collinear second-harmonic generation (SHG) intensity autocorrelation technique. These films are suitable for measurements over a broad wavelength range, down to 780 nm, due to their wide optical transparency. The single-crystal film with thickness (3 μm) less than the coherence length requires no phase-matching for efficient broadband SHG. Pulse walk-off due to group-velocity mismatch (GVM) and temporal broadening of the pulses due to group-velocity dispersion (GVD) are found to be negligible. These effects have been estimated for pulse width down to few-cycle pulses (10 fs), and the analyses show that these films can be used to characterize such ultrashort optical pulses.