Organic thin-film solar cells: Devices and materials

In recent years, the performance of organic thin-film solar cells has gained rapid progress, of which the power conversion efficiencies (ηp) of 3%-5% are commonly achieved, which were difficult to obtain years ago and are improving steadily now. The ηp of 7.4% was achieved in the year 2010, and ηp of 9.2% was disclosed and confirmed at website of Mitsubishi Chemical in April, 2011. The promising future is that the ηp of 10% is achievable according to simulation results. Apparently, these are attributed to material innovations, new device structures, and also the better understanding of device physics. This article summarizes recent progress in organic thin-film solar cells related to materials, device structures and working principles. In the device functioning part, after each brief summary of the working principle, the methods for improvements, such as absorption increment, organic/electrode interface engineering, morphological issues, are addressed and summarized accordingly. In addition, for the purpose of increasing exciton diffusion efficiency, the benefit from triplet exciton, which has been proposed in recent years, is highlighted. In the active material parts, the chemical nature of materials and its impact on device performance are discussed. Particularly, emphasis is given toward the insight for better understanding device physics as well as improvements in device performance either by development of new materials or by new device architecture.     

Perovskite thin-film solar cell: excitation in photovoltaic science

As a new member of thin-film solar cells,the perovskite solar cells have inspired a new research hot in new photoelectric materials and devices,and have given a new energy to the photovoltaic science.Currently,various device structures,including mesoporous and planar,with and without hole transport material have been developed.In this review,much focus has been addressed to the deposition of high-quality perovskite films,structural optimization,and interface engineering as well as the understanding of the charge generation,transport,and recombination mechanisms of the devices.Furthermore,cost,stability,and environment issues of the cell are also discussed for commercial application.     

基于磷光材料的低给体比例有机太阳能电池

本文以低比例的磷光材料作为给体,制备了基于MoOx/C60:x%Ir(ppy)3的有机太阳能电池(OPV)器件.其中,C60为高比例的受体材料,金属配合物Ir(ppy)3为低比例的给体材料,MoOx为阳极缓冲层.通过一系列不同Ir(ppy)3比例的OPV器件对比研究,得出了最优器件结构.研究发现,当Ir(ppy)3比例足够小时,器件表现为肖特基势垒,开路电压(VOC)较大,短路电流(JSC)较小;随着Ir(ppy)3比例的增加,VOC逐渐减少,而JSC逐渐增大;当进一步增加Ir(ppy)3比例时,VOC趋于稳定,JSC开始减小.结果显示,5%Ir(ppy)3比例的器件性能最佳,效率达1.7%.为了使器件效率得到进一步提升,本研究组采用吸收光谱范围比C60更宽的C70作为受体材料,使光电转换效率进一步提升至3.0%.     

Organic functional materials based buffer layers for efficient perovskite solar cells

In this review, we highlight the recent development of organic π-functional materials as buffer layers in constructing efficient perovskite solar cells(PVSCs). By following a brief introduction on the PVSC development, device architecture and material design features, we exemplified the exciting progresses made in field by exploiting organic π-functional materials based hole and electron transport layers(HTLs and ETLs) to enable high-performance PVSCs.     

Effect of hole-transporting materials on the photovoltaic performance and stability of all-ambient-processed perovskite solar cells

High-efficiency perovskite solar cells(PSCs) reported hitherto have been mostly prepared in a moisture and oxygen-free glove-box atmosphere, which hampers upscaling and real-time performance assessment of this exciting photovoltaic technology. In this work, we have systematically studied the feasibility of allambient-processing of PSCs and evaluated their photovoltaic performance. It has been shown that phasepure crystalline tetragonal MAPbI_3 perovskite films are instantly formed in ambient air at room temperature by a two-step spin coating process, undermining the need for dry atmosphere and post-annealing.All-ambient-processed PSCs with a configuration of FTO/TiO_2/MAPbI_3/Spiro-OMeTAD/Au achieve opencircuit voltage(990 mV) and short-circuit current density(20.31 mA/cm~2) comparable to those of best reported glove-box processed devices. Nevertheless, device power conversion efficiency is still constrained at 5% by the unusually low fill-factor of 0.25. Dark current–voltage characteristics reveal poor conductivity of hole-transporting layer caused by lack of oxidized spiro-OMe TAD species, resulting in high seriesresistance and decreased fill-factor. The study also establishes that the above limitations can be readily overcome by employing an inorganic p-type semiconductor, copper thiocyanate, as ambient-processable hole-transporting layer to yield a fill-factor of 0.54 and a power conversion efficiency of 7.19%. The present findings can have important implications in industrially viable fabrication of large-area PSCs.     

Structural and electronic properties of CuSbS2 and CuBiS2: potential absorber materials for thin-film solar cells

As the demand for photovoltaics rapidly increases, there is a pressing need for the identification of new visible light absorbing materials for thin-film solar cells that offer similar performance to the current technologies based on CdTe and Cu(In,Ga)Se(2). Metal sulphides are the ideal candidate materials, but their band gaps are usually too large to absorb significant fractions of visible light. However, by combining Cu(+) (low binding energy d(10) band) and Sb(3+)/Bi(3+) (low binding energy s(2) band), the ternary sulphides CuSbS(2) and CuBiS(2) are formed, which have been gathering recent interest for solar cell applications. Using a hybrid density functional theory approach, we calculate the structural and electronic properties of these two materials. Our results highlight the stereochemical activity of the Sb and Bi lone pair electrons, and predict that the formation of hole carriers will occur in the Cu d(10) band and hence will involve oxidation of Cu(I).     

Self-assembled monolayer initiated electropolymerization: a route to thin-film materials with enhanced photovoltaic performance

Continuing progress in the field of organic polymer photovoltaic (PV) devices requires the development of new materials with better charge-transport efficiency. To improve this parameter, we have investigated surface-attached bilayer polymer PV thin films prepared starting from a covalently attached monolayer of an electroactive initiator using sequential electropolymerization of dithiophene and its derivatives. These systems were found to show significantly increased photocurrent generation quantum yields as compared to systems made through conventional approaches. In addition, the described PV thin films possess remarkable mechanical, air, and photostability. These properties likely arise from the more uniform and better ordered bulk layer morphologies as well as tighter covalently bonded contacts at the interfacial junctions, contributing to improved charge transport. While more studies on the fundamental reasons behind the discovered phenomenon are currently underway, this information can be readily applied to build more efficient organic polymer photovoltaics.     

Chemical etching of zinc oxide for thin-film silicon solar cells

Chemical etching is widely applied to texture the surface of sputter-deposited zinc oxide for light scattering in thin-film silicon solar cells. Based on experimental findings from the literature and our own results we propose a model that explains the etching behavior of ZnO depending on the structural material properties and etching agent. All grain boundaries are prone to be etched to a certain threshold, that is defined by the deposition conditions and etching solution. Additionally, several approaches to modify the etching behavior through special preparation and etching steps are provided.     

Graphene-based materials for polymer solar cells

Due to the remarkable electronic, optical, thermal, and mechanical properties, graphene-based materials have shown great potential in a wide range of technique applications. Particularly, the high transparency, conductivity, flexibility, and abundance make graphene materials highly attractive for polymer solar cells (PSCs). Graphene-based materials have been regarded as one promising candidate used in various parts in PSCs not only as electrodes, but also as interfacial layers and active layers with an aim to boost the power conversion efficiency of the devices. In this review, we summarize the recent progress about the design and synthesis of graphene-based materials for efficient PSCs along with the related challenges and future perspectives.     

Designing spirobifullerene core based three-dimensional cross shape acceptor materials with promising photovoltaic properties for high-efficiency organic solar cells

The development of organic electron acceptor materials is one of the key factors for realizing high-performance organic solar cells (OSCs). Nonfullerene electron acceptors, compared to traditional fullerene acceptor materials, have gained much impetus owing to their better optoelectronic tunabilities and lower cost, as well as higher stability. Therefore, 5 three-dimensional (3D) cross-shaped acceptor materials having a spirobifullerene core flanked with 2,1,3-benzothiadiazole are designed from a recently synthesized highly efficient acceptor molecule SF(BR) ₄ and are investigated in detail with regard to their use as acceptor molecules in OSCs. The density functional theory (DFT) and time-dependent DFT (TDDFT) calculations have been performed for the estimation of frontier molecular orbital (FMO) analysis, density of states analysis, reorganization energies of electron and hole, dipole moment, open-circuit voltage, photo-physical characteristics, and transition density matrix analysis. In addition, the structure-property relationship is studied, and the influence of end-capped acceptor modifications on photovoltaic, photo-physical, and electronic properties of newly selected molecules ( H1-H5 ) is calculated and compared with reference ( R ) acceptor molecule SF(BR) ₄ . The structural tailoring at terminals was found to effectively tune the FMO band gap, energy levels, absorption spectra, open-circuit voltage, reorganization energy, and binding energy value in selected molecules H1 to H5 . The 3D cross-shaped molecules H1 to H5 suppress the intermolecular aggregation in PTB7-Th blend, which leads to high efficiency of acceptor material H1 to H5 in OSCs. Consequently, better optoelectronic properties are achieved from designed molecules H1 to H5 . It is proposed that the conceptualized molecules are superior than highly efficient spirobifullerene core-based SF(BR) ₄ acceptor molecules and, thus, are recommended to experiments for future developments of highly efficient solar cells.     

Titanium-containing zeolites and microporous molecular sieves as photovoltaic solar cells.

Four titanium-containing zeolites and microporous molecular sieves differing on the crystal structure and particle size (Ti/Beta, Ti/Beta-60, TS-1 and ETS-10) are prepared, and their activity for solar cells after incorporating N3 (a commercially available ruthenium polypyridyl dye) is tested. All the zeolites exhibit photovoltaic activity, and the photoresponse is quite independent of the zeolite pore dimensions or particle size. The photoresponse increases with titanium content in the range 1-7% wt. In this way, cells are obtained that have open-circuit voltage Voc=560 mV and maximum short-circuit photocurrent density Isc=100 microA, measured for 1x1 cm2 surfaces with a solar simulator at 1000 W through and AM 1.5 filter. These values are promising and comparable to those obtained for current dye-sensitized titania solar cells.     

Organic solar cells for indoor power generation

正During last decades, organic solar cells (OSCs) have achieved remarkable advancements via extensive studies on the optimization of photovoltaic donor/acceptor (D/A) materials, device fabrication, and the D/A bulk heterojunction morphologies. Power conversion efficiencies (PCEs) up to～16%for single junction cells and over 17%PCEs were successfully demonstrated for tandem OSC devices [1,2].OSCs may find real industrial applications soon, including     

Organic solar cells processed from green solvents

1. Download : Download high-res image (305KB)
2. Download : Download full-size image

     

Back contact interfacial modification mechanism in highly-efficient antimony selenide thin-film solar cells

Antimony selenide(Sb₂Se₃) is a potential photovoltaic(PV) material for next-generation solar cells and has achieved great development in the last several years. The properties of Sb₂Se₃ absorber and back contact influence the PV performances of Sb₂Se₃ solar cells. Hence, optimization of back contact characteristics and absorber orientation are crucial steps in raising the power conversion efficiency(PCE) of Sb₂Se_3<...     

Organic dyes containing thienylfluorene conjugation for solar cells

New organic dyes that contain variable lengths of conjugation featuring alternating thiophene and fluorene segments have been synthesized and efficient nano-crystalline TiO2 based dye-sensitized solar cells were fabricated using these molecules as light-harvesting sensitizers.     

Property influence of polyanilines on photovoltaic behaviors of dye-sensitized solar cells

The influence of polyanilines (PANIs) as hole conductors on the photovoltaic behaviors of dye-sensitized solar cells is studied. The current-voltage (I-V) characteristics and the incident photon to current conversion efficiency (IPCE) curves of the devices are determined as the function of different conductivities and morphologies of PANIs. The results show that the conductivity of PANIs affects the performance of the devices greatly, and PANI with the intermediate conductivity value (3.5 S/cm) is optimum. In addition, the effects of both the film formation property and the cluster size of polyanilines on the photovoltaic behaviors of the devices are also discussed.     

Molecular dispersion enhances photovoltaic efficiency and thermal stability in quasi-bilayer organic solar cells

In comparison to widely adopted bulk heterojunction(BHJ)structures for organic solar cells(OSC),exploiting the sequential deposition to form planar heterojunction(PHJ)structures enables to realize the favorable vertical phase separation to facilitate charge extraction and reduce charge recombination in OSCs.However,effective tunings on the power conversion efficiency(PCE)in PHJ-OSCs are still restrained by the currently available methods.Based on a polymeric donor PBDBT-2 F(PBDBT=Poly[[4,8-bis[5-(2-ethylhexyl)-4-fluoro-2-thienyl]benzo[1,2-b:4,5-b′]dithiophene-2,6-diyl]-2,5-thiophenediyl[5,7-bis(2-ethylhexyl)-4,8-dioxo-4 H,8 H-benzo[1,2-c:4,5-c′]dithiophene-1,3-diyl]-2,5-thiophenediyl])and a non-fullerene(NF)acceptor Y6,we proposed a strategy to improve the properties of photovoltaic performances in PHJ-based OSCs through dilute dispersions of the PBDBT-2 F donor into the acceptor-dominant phase with the sequential film deposition.With the control of donor dispersions,the charge transport balance in the PHJ-OSCs is improved,leading to the expedited photocarrier sweep-out with reduced bimolecular charge recombination.As a result,a PCE of 15.4%is achieved in the PHJ-OSCs.Importantly,the PHJ solar cells with donor dispersions exhibit better thermal stability than corresponding BHJ devices,which is related to the better film morphology robustness and less affected charge sweep-out during the thermal aging.     

Effect of coadsorbent properties on the photovoltaic performance of dye-sensitized solar cells

Stearic acid as a coadsorbent, which has a low dipole moment and high solubility, retarded the rate of dye adsorption during the competitive anchoring process on the TiO(2) layer in dye-sensitized solar cells (DSCs), thereby increasing the content of strongly bound dye on the TiO(2) surface. This resulted in an approximately 25% improvement in both J(SC) and the power conversion efficiency of the DSCs, even for much lower dye coverage.     

Organic dyes incorporating low-band-gap chromophores for dye-sensitized solar cells

Versatile dyes based on benzothiadiazole and benzoselenadiazole chromophores have been developed that perform efficiently in dye-sensitized solar cells. Power conversion efficiency of 3.77% is realized for a dye in which charge recombination is probably hindered by the nonplanar charge-separated structure.     

Conjugated polymer-functionalized carbon nanotubes enhance the photovoltaic properties of polymer solar cells

In this study, we fabricated a series of polymer solar cells (PSCs) incorporating blends of the maleimide?Cthiophene copolymer PTM10, multi-walled carbon nanotubes (MWCNTs) functionalized with the 2-hydroxyethyl?Cpresenting maleimide?Cthiophene copolymer PTM21-OH (PTM21-CNT), and the fullerene derivative [6,6]-phenyl-C₆₁-butyric acid methyl ester (PCBM) in various weight ratios. PTM21-CNT behaved as an efficient compatibilizer for PTM10 and PCBM and as a charge transport assister when incorporated in the photoactive layers of the PSCs. The energy levels of the lowest unoccupied molecular orbitals and highest occupied molecular orbitals in thin films of PTM10/PTM21-CNT/PCBM blends decreased upon increasing the PTM21-CNT content. The photovoltaic performance of PSCs incorporating the PTM10/PTM21-CNT/PCBM blends increased upon increasing the PTM21-CNT content, presumably because of the high charge-transporting capacity of the MWCNTs. The highest short-circuit current density and photo-energy conversion efficiency were enhanced by approximately 26% and 27%, respectively, relative to those of the PSC without the incorporation PTM21-CNT.