Impact of structure and morphology on charge transport in semiconducting oligomeric thin-film devices.

We investigated various thin-film morphologies of vacuum-deposited highly luminescent 2,5-di-n-octyloxy-1,4-bis[4'-(styryl)styryl]benzene (Ooct-OPV5) in a typical light-emitting-diode device structure. Important modifications in the thin-film morphology and structure were obtained by changing the substrate temperature in the range 23-90 degrees C. Structural analysis by X-ray and electron diffraction provided clear evidence for polymorphism in evaporated thin films of Ooct-OPV5. Concomitantly, the hole mobility in the corresponding devices was determined by transient electroluminescence measurements. We demonstrate that the substrate temperature T(sub) is a key parameter that controls the hole mobility of the devices. Increasing T(sub) between 23 and 84 degrees C results in a progressive increase of the zero-field hole mobility from 10(-6) to 10(-4) cm(2) V(-1) s(-1). The increase in hole mobility is correlated to the average grain size in the thin films. In addition, we give evidence for the existence of a peculiar growth mode in the bulk crystal structure of Ooct-OPV5, whereby the (a,b) and (b,c) planes can grow in a homoepitaxial manner.     

Covalent and non‐covalent binding in the ion/ion charge inversion of peptide cations with benzene‐disulfonic acid anions

Protonated angiotensin II and protonated leucine enkephalin‐based peptides, which included YGGFL, YGGFLF, YGGFLH, YGGFLK and YGGFLR, were subjected to ion/ion reactions with the doubly deprotonated reagents 4‐formyl‐1,3‐benzenedisulfonic acid (FBDSA) and 1,3‐benzenedisulfonic acid (BDSA). The major product of the ion/ion reaction is a negatively charged complex of the peptide and reagent. Following dehydration of [M + FBDSA‐H]^? via collisional‐induced dissociation (CID), angiotensin II (DRVYIHPF) showed evidence for two product populations, one in which a covalent modification has taken place and one in which an electrostatic modification has occurred (i.e. no covalent bond formation). A series of studies with model systems confirmed that strong non‐covalent binding of the FBDSA reagent can occur with subsequent ion trap CID resulting in dehydration unrelated to the adduct. Ion trap CID of the dehydration product can result in cleavage of amide bonds in competition with loss of the FBDSA adduct. This scenario is most likely for electrostatically bound complexes in which the peptide contains both an arginine residue and one or more carboxyl groups. Otherwise, loss of the reagent species from the complex, either as an anion or as a neutral species, is the dominant process for electrostatically bound complexes. The results reported here shed new light on the nature of non‐covalent interactions in gas phase complexes of peptide ions that can be used in the rationale design of reagent ions for specific ion/ion reaction applications. Copyright © 2012 John Wiley & Sons, Ltd.     

Microsecond simulations of DNA and ion transport in nanopores with novel ion–ion and ion–nucleotides effective potentials

We developed a novel scheme based on the grand‐canonical Monte Carlo/Brownian dynamics simulations and have extended it to studies of ion currents across three nanopores with the potential for single‐stranded DNA (ssDNA) sequencing: solid‐state nanopore Si₃N₄, α‐hemolysin, and E111N/M113Y/K147N mutant. To describe nucleotide‐specific ion dynamics compatible with ssDNA coarse‐grained model, we used the inverse Monte Carlo protocol, which maps the relevant ion–nucleotide distribution functions from all‐atom molecular dynamics (MD) simulations. Combined with the previously developed simulation platform for Brownian dynamics simulations of ion transport, it allows for microsecond‐ and millisecond‐long simulations of ssDNA dynamics in the nanopore with a conductance computation accuracy that equals or exceeds that of all‐atom MD simulations. In spite of the simplifications, the protocol produces results that agree with the results of previous studies on ion conductance across open channels and provide direct correlations with experimentally measured blockade currents and ion conductances that have been estimated from all‐atom MD simulations. © 2014 Wiley Periodicals, Inc.     

Effect of multiple adduct fullerenes on charge generation and transport in photovoltaic blends with poly(3‐hexylthiophene‐2,5‐diyl)

The effect of replacing [6,6]‐phenyl‐C₆₁ butyric acid methyl ester (PCBM) by its multiadduct analogs (bis‐PCBM and tris‐PCBM) in bulk heterojunction organic solar cells with poly(3‐hexylthiophene‐2,5‐diyl) (P3HT) is studied in terms of blend film microstructure, photophysics, electron transport properties, and device performance. Although the power conversion efficiency of the blend with bis‐PCBM is similar to the blend with PCBM, the performance of the devices with tris‐PCBM is considerably lower as a result of small photocurrent. Despite the lower electron affinity of the fullerene multiadducts, μs‐ms transient absorption measurements show that the charge generation efficiency is similar for all three fullerenes. The annealed blend films with multiadducts show a lower degree of fullerene aggregation and lower P3HT crystallinity than the annealed blend films with PCBM. We conclude that the reduction in performance is due largely to poorer electron transport in the blend films from higher adducts, due to the poorer fullerene network formation as well as the slower electron transport within the fullerene phase, confirmed here by field effect transistor measurements. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2010     

Structural,ion transport parameter and electrochemical properties of plasticized polymer composite electrolyte based on PVA: A novel approach to fabricate high performance EDLC devices

In this study a novel polymer composite electrolytes (PCEs) based on poly (vinyl alcohol) (PVA): Ce(III)-complex:NH₄SCN plasticized with glycerol are prepared by solution cast technique. XRD and FTIR routes are used to study the film structure. The crystalline and amorphous areas are determined through the deconvolution of XRD spectra and their values were used to calculate the degree of crystallinity. The deconvolutions of the FTIR of asymmetric C≡N stretching mode are carried out to establish the bands coupled with free ions, contact ion pairs and ion aggregates. The maximum ambient temperature DC conductivity of 2.07 × 10⁻³ S cm⁻¹ is recorded for the sample with the lowest degree of crystallinity. It was found that the number density (n), mobility (μ) and diffusion coefficient (D) of ions are increased with the glycerol concentration. Field emission scanning electron microscopy (FESEM) is used to examine the effect of plasticizer on film morphology. The DC conductivity trend is interpreted in detail with the help of dielectric properties. It is found that the transference numbers of ions (t_ion) and electrons (t_el) are 0.965 and 0.035, respectively. It is shown by the linear sweep voltammetry (LSV) that the potential window of the PCE is 2.1 V. A shape, which is nearly rectangular at lower scan rates, is identified from cyclic voltammetry (CV). Specific capacitance and energy density are exhibited by EDLC with average of 161.5 F/g and 18.17 Wh/kg, respectively within 400 cycles. The initial power density is shown by EDLC to be 2.825 × 10³ W/kg.     

Correlation of charge transport with structural order in highly ordered melt‐crystallized poly(3‐hexylthiophene) thin films

A series of well‐defined poly(3‐hexylthiophene)s (P3HT) of different molecular weight (MW) and high regioregularity was investigated for charge transport properties in as‐cast and melt‐crystallized films. The semicrystalline structure of the P3HT was characterized by X‐ray scattering and Atomic force microscopy. Crystallization by cooling from the melt led to a substantial increase in crystallinity and a stronger alignment of the crystals in comparison to as‐cast films. The increase in crystallinity went along with an increase in hole mobility of up to an order of magnitude as measured by the space charge limited current method. Additionally, the hole mobility depended on the long period of P3HT lamellae and consequently on the MW. In compliance with the long period, the charge carrier mobility first increased with the MW before decreasing again at the onset of chain folding. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2013 , 51, 943–951     

Investigation of space charge effects and ion trapping capacity on direct introduction ultra‐high‐resolution mass spectrometry workflows for metabolomics

Ultra‐high‐resolution mass spectrometry, in the absence of chromatography, is finding its place for direct analyses of highly complex mixtures, such as those encountered during untargeted metabolomics screening. Advances, however, have been tempered by difficulties such as uneven signal suppression experienced during electrospray ionization. Moreover, ultra‐high‐resolution mass spectrometers that use Orbitrap and ICR analyzers both suffer from limited ion trapping capacities, owing principally to space‐charge effects. This study has evaluated and contrasted the above two types of Fourier transform mass spectrometers for their abilities to detect and identify by accurate mass measurement, small molecule metabolites present in complex mixtures. For these direct introduction studies, the Orbitrap Fusion showed a major advantage in terms of speed of analysis, enabling detection of 218 of 440 molecules (<2 ppm error, 500 000 resolution at m/z 200) present in a complex mixture in 5 min. This approach is the most viable for high‐throughput workflows, such as those used in investigations involving very large cohorts of metabolomics samples. From the same mixture, 183 unique molecules were observed by FT‐ICR in the broadband mode, but this number was raised to 235 when “selected ion monitoring‐stitching” (SIM‐stitching) was employed (<0.1 ppm error, 7 T magnet with dynamic harmonization cell, 1.8 million resolution at m/z 200, both cases). SIM‐stitching FT‐ICR thus offered the most complete detection, which may be of paramount importance in situations where it is essential to obtain the most complete metabolic profile possible. This added completeness, however, came at the cost of a more lengthy analysis time (120 min including manual treatment). Compared to the data presented here, future automation of processing, plus the use of absorption mode detection, segmented ion detection (stepwise detection of smaller width m/z sections), and higher magnetic field strengths, can substantially reduce FT‐ICR acquisition times.     

Comparative analysis of linear and nonlinear models for ion transport problem in chronoamperometry

Ion transport problem related to controlled potential experiments in electrochemistry is studied. The problem is assumed to be superposition of diffusion and migration under the influence of an electric field. The comparative analysis are presented for three well-known models—pure diffusive (Cottrell’s), linear diffusion-migration, and nonlinear diffusion-migration (Cohn’s) models. The nonlinear model is derived by the identification problem for a nonlinear parabolic equation with nonlocal additional condition. This problem reduced to an initial-boundary value problem for nonlinear parabolic equation. The nonlinear finite difference approximation of this problem, with an appropriate iteration algorithm is derived. The comparative numerical analysis for all three models shows an influence of the nonlinear migration term, the valences of oxidized and reduced oxidized species, also diffusivity to the value of the total charge. The obtained results permits one to estimate bounds of linear and nonlinear ion transport models.     

irGPU.proton.Net: Irregular strong charge interaction networks of protonatable groups in protein molecules—a GPU solver using the fast multipole method and statistical thermodynamics

Motivation: A cluster of strongly interacting ionization groups in protein molecules with irregular ionization behavior is suggestive for specific structure–function relationship. However, their computational treatment is unconventional (e.g., lack of convergence in naive self‐consistent iterative algorithm). The stringent evaluation requires evaluation of Boltzmann averaged statistical mechanics sums and electrostatic energy estimation for each microstate. Summary: irGPU: Irregular strong interactions in proteins—a GPU solver is novel solution to a versatile problem in protein biophysics—atypical protonation behavior of coupled groups. The computational severity of the problem is alleviated by parallelization (via GPU kernels) which is applied for the electrostatic interaction evaluation (including explicit electrostatics via the fast multipole method) as well as statistical mechanics sums (partition function) estimation. Special attention is given to the ease of the service and encapsulation of theoretical details without sacrificing rigor of computational procedures. irGPU is not just a solution‐in‐principle but a promising practical application with potential to entice community into deeper understanding of principles governing biomolecule mechanisms. © 2015 Wiley Periodicals, Inc.     

Tetraaryl-methane analogues in group 14—V. Distortion of tetrahedral geometryin terms of through-space π–π and π–σ interactions andNMR sagging in terms of π–σcharge transfer

44 members of thecompound series Ph_4−nMR_n (M=Si, Ge, Sn, Pb; R=o-, m-, p-Tol; n=0–4) were synthesized (15 newcompounds). The crystal structures of Ph₃Sn (o-Tol) and PhSn (o-Tol)₃ were determined and compared to 16 known structures. Subject to the distanced (M–C), an interplay between through-space π–π repulsion and π–σ attraction leads to either elongated or compressed tetrahedral geometry. ²⁹ Si-, ¹¹⁹ Sn- and ²⁰⁷ Pb-NMR chemical shifts were determined in solution and in the solid state. ⁷³ Ge chemical shifts were measured only in solution. Anupfield or downfield sagging of the chemical shifts along each series is rationalized in terms of a π–σcharge transfer which is constrained by torsion of the aromatic groups.     

Upgraded charge transport in g-C3N4 nanosheets by boron doping and their heterojunction with 3D CdIn2S4 for efficient photodegradation of azo dye

The facilitation of charge transport toward the targeted chemical reaction is a challenging task for two-dimensional (2D) nanomaterials. We demonstrate the effectiveness of two different strategies, non-metal doping and heterojunction formation, to adjust the electronic and molecular structures of g-C₃N₄ nanosheets (CN), which could widen the visible-light response and improve the photo-induced electron–hole separation. The g-C₃N₄ nanosheets containing impurity levels (boron doping (BCN)) were prepared by a high-temperature solid-state reaction. Additionally, by anchoring the 3D dichalcogenide structures (CdIn₂S₄) elicited by a wet chemical route, hybrid BCN/CdIn₂S₄ nanostructures were obtained. The resulting BCN/CdIn₂S₄ (BCN–CIS3) nanostructures exhibited an excellent degradation efficiency (95%) for methyl orange (MO) compared to pristine g-C₃N₄ nanosheets (CN) (28%) and boron-doped g-C₃N₄ (BCN) (35%). All the optimized photocatalysts were thoroughly characterized using various techniques and investigated for comparative structural, optical, morphological, and catalytic properties. Our results reveal that introducing boron atoms into the lattice of g-C₃N₄ nanosheets leads to reduction in the band-gap energy and rapid electron transfer. The formation of heterojunctions with the 3D CdIn₂S₄ further assists in improving the degradation efficiency by minimizing the undesired electron–hole recombination, as confirmed by time-resolved photoluminescence (TRPL) analysis. This work proposes feasible strategies and their synergy to develop innovative materials for sustainable energy conversion and environmental remediation applications.     

Determination of lithium and transition metals in Li1Ni1/3Co1/3Mn1/3O2 (NCM) cathode material for lithium‐ion batteries by capillary electrophoresis

In this work, we present a novel electrophoretic method that was developed for the determination of lithium and transition metals in LiNi_1/3Co_1/3Mn_1/3O₂ cathode material after microwave digestion. The cations in the digested LiNi_1/3Co_1/3Mn_1/3O₂ material were separated by CE and the element content was determined by UV/Vis detection. To characterize the precision of the measurements, the RSDs and concentrations were calculated and compared to those obtained with ICP‐optical emission spectrometry (ICP‐OES). Furthermore, a certified reference material (BCR 176R —fly ash) was investigated for all techniques. For active material components, the LOD and LOQ were determined. The LODs and LOQs for the metals determined by CE were as follows: lithium (LOD/LOQ): 17.41/62.70 μg/L, cobalt (LOD/LOQ): 348.4/1283 μg/L, manganese (LOD/LOQ): 540.2/2095 μg/L, and nickel (LOD/LOQ): 838.0/2982 μg/L. Recovery rates for lithium were in the range of 95–103%. It could be proven that with the new technique, the results for the determination of the lithium content of active material were comparable with those obtained by ICP‐OES and ion chromatography. Furthermore, the recovery rates of the transition metals were determined to be between 96 and 110% by CE and ICP‐OES.     

Evolution of chemical bonding and electron density rearrangements during D3h → D3d reaction in monolayered TiS2: A QTAIM and ELF study

Monolayered titanium disulfide TiS₂, a prospective nanoelectronic material, was previously shown to be subject to an exothermic solid‐state D_3h–D_3d reaction that proceeds via a newly discovered transition state. Here, we study the reaction in detail using topological methods of quantum chemistry (quantum theory of atoms in molecules and electron localization function analysis) and show how electron density and chemical bonding between the atoms change in the course of the reaction. The reaction is shown to undergo a series of topological catastrophes, associated with elementary chemical events such as break and formation of bonds (including the unexpected formation of S? S bonding between sulfur layers), and rearrangement of electron density of outer valence and core shells. © 2014 Wiley Periodicals, Inc.     

A solid‐phase microextraction gas chromatography/ion trap tandem mass spectrometry method for simultaneous determination of ‘foxy smelling compounds’ and 3‐alkyl‐2‐methoxypyrazines in grape juice

2′‐Aminoacetophenone (o‐AAP) was identified as the main cause of the aging note called ‘hybrid note’ or ‘foxy smell’ which is typical of non‐Vitis vinifera grapes. Together with methyl anthranilate (MA), this compound contributes to the typical foxy taint of wines made with non‐Vitis vinifera grapes. 3‐Alkyl‐2‐methoxypyrazines in grapes, with their herbaceous note and very low sensory thresholds, contribute to the aroma of several wines. In this study, a solid‐phase microextraction gas chromatography/ion trap tandem mass spectrometry (SPME‐GC/IT‐MS/MS) method for simultaneous detection of o‐AAP, MA and ethyl‐, isopropyl‐, sec‐butyl‐ and isobutylmethoxypyrazine in grape juice was developed. The method was applied to the study of several grape juices: the time required for analysis was less than 24 min, and the method was considered to be suitable for analysis of ‘foxy compounds’ and methoxypyrazines in grape juice. The high levels of MA and o‐AAP found in Clinton and Siebel grapes confirmed the ‘hybrid’ character of these varieties. Copyright © 2010 John Wiley & Sons, Ltd.     

Capillary electrophoresis with contactless conductivity detection for the quantification of fluoride in lithium ion battery electrolytes and in ionic liquids—A comparison to the results gained with a fluoride ion‐selective electrode

In this study, an optimized method using capillary electrophoresis (CE) with a direct contactless conductivity detector (C⁴D) for a new application field is presented for the quantification of fluoride in common used lithium ion battery (LIB) electrolyte using LiPF₆ in organic carbonate solvents and in ionic liquids (ILs) after contacted to Li metal. The method development for finding the right buffer and the suitable CE conditions for the quantification of fluoride was investigated. The results of the concentration of fluoride in different LIB electrolyte samples were compared to the results from the ion‐selective electrode (ISE). The relative standard deviations (RSDs) and recovery rates for fluoride were obtained with a very high accuracy in both methods. The results of the fluoride concentration in the LIB electrolytes were in very good agreement for both methods. In addition, the limit of detection (LOD) and limit of quantification (LOQ) values were determined for the CE method. The CE method has been applied also for the quantification of fluoride in ILs. In the fresh IL sample, the concentration of fluoride was under the LOD. Another sample of the IL mixed with Li metal has been investigated as well. It was possible to quantify the fluoride concentration in this sample.     

A validated SIM GC/MS method for the simultaneous determination of dextromethorphan and its metabolites dextrorphan, 3‐methoxymorphinan and 3‐hydroxymorphinan in biological matrices and its application to in vitro CYP2D6 and CYP3A4 inhibition study

Dextromethorphan is used as a probe drug for assessing CYP2D6 and CYP3A4 activity in vivo and in vitro. A SIM GC/MS method without derivatization for the simultaneous determination of dextromethorphan and its metabolites, dextrorphan, 3‐methoxymorphinan and 3‐hydroxymorphinan, in human plasma, urine and in vitro incubation matrix was developed and validated. Calibration curves indicated good linearity with a coefficient of variation (r) better than 0.995. The lower limit of quantitation was found to be 10 ng/mL for all analytes in all matrices. Intra‐day and inter‐day precision for dextromethorphan and its metabolites was better than 9.02 and 9.91%, respectively and accuracy ranged between 91.76 and 106.27%. Recovery for dextromethorphan, its metabolites and internal standard levallorphan was greater than 72.68%. The method has been successfully applied for the in vitro inhibition of metabolism of dextromethorphan by CYP2D6 and CYP3A4 using known inhibitors of CYPs such as quinidine and verapamil. Copyright © 2009 John Wiley & Sons, Ltd.