不同pH下多晶Au电极上的氧还原反应

利用旋转圆盘电极体系系统研究了不同pH下氧气在多晶Au电极上的还原反应,并计算了不同pH条件及不同超电势范围内的Tafel斜率.研究发现,同在酸性（但是pH不同）或同在碱性（但是pH不同）的介质中氧还原起始电位以及纯粹动力学控制区（电流较小的区域）的氧还原电流几乎不随溶液的pH值而变化.酸性条件下以及碱性条件的高超电势范围内,Tafel斜率接近120mV/dec;而碱性条件的低超电势范围内,Tafel斜率接近60mV/dec.金电极上ORR的活化超电势随着pH值的增加而降低约79mV/pH.初步讨论了pH对氧还原机理和动力学的影响及其内在原因.     

Current trends in the description of lanthanum strontium manganite oxygen electrode reaction mechanism in a high-temperature solid oxide cell

This review summarizes recent progress in understanding the oxygen reduction and evolution reactions at the lanthanum strontium manganite electrode of a high-temperature solid oxide cell. Information provided here is put into the perspective of the defect chemistry of lanthanum strontium manganite and its impact on the electrode reaction mechanisms itself. After summarizing recent views on the oxygen reduction reaction mechanism, the focus turns to the oxygen evolution reaction, which is significantly less treated in the literature. A combination of the information in the literature on both reactions was the basis for modified reaction mechanism of the oxygen evolution reaction to be proposed under consideration of recent experimental observations and theoretical findings.     

Effect of the electrode material on the oxygen reduction at the nonstoichiometric lanthanum fluoride/electrode interface

The voltammetry method with a linear potential scan is used for investigating the effect the electrode material (Ni, Co, electrodes on the basis of cobalt oxides modified with carbon) exerts on the reduction of gaseous oxygen at interfaces solid fluoride-conducting electrode LaF₃:Eu²⁺/electrode, O₂, and conjugated processes. Properties of the modified electrodes are characterized by the impedance spectroscopy, scanning electron microscopy, and x-ray photoelectron spectroscopy methods. The oxygen reaction is irreversible at the LaF₃:Eu²⁺|Ni (or Co) interfaces. At the interface of LaF₃:Eu²⁺ with modified electrodes Co (C n at %), where n = 5 and 9, mobile forms of oxygen are reversible and the reduction of gaseous and chemisorbed oxygen is controlled by diffusion with different effective kinetic parameters.     

Spectroscopic reflectometry as in‐operando method for thickness determination of anodic oxide films on titanium

The present work focuses on the development of an in‐operando technique based on the visible spectroscopic reflectometry (VSR) for simultaneous determination of the oxide film formation during anodizing. The establishment of the VSR as in‐operando technique requires an extensive validation by comparative in‐situ but non‐operando thickness measurements under aqueous conditions. The investigations were carried out on anodic oxide films on pure titanium. The authors demonstrate the VSR as a simple and robust method for measurement under electrolyte covering. Additionally, an empirical correction algorithm extends the limitation of the visible reflectometry in thin film thickness. Reliable film thickness values can be measured down to ≥5 nm. The in‐operando mode yields additional information about the film growth time resolved. Copyright © 2013 John Wiley & Sons, Ltd.     

Surface modification of titanium by anodic oxidation in phosphoric acid at low potentials. Part 1. Structure,electronic properties and thickness of the anodic films

Titanium surface characteristics determine the degree of success of permanent implants. The topography, morphology of the surface in micro and nano scales, the impurities present and other characteristics are a main concern, and therefore a multi‐technique approach is required in order to evaluate modification process effects on the surface. Surface modification of titanium in the nanometrical range was performed by means of anodisation in phosphoric with the aim of improving both the biocompatibility and the corrosion resistance in the biological media. Biocompatible characteristics of the modified titanium surface, as the presence of anatase in the oxide film and the incorporation of phosphate to the surface, were determined. Moreover, the electronic properties of the surface oxide presented a carrier number adequate for biomedical applications. The increase in the film thickness from 3 to 42 nm was estimated from EIS results when anodising potentials from 0 to 30 V were applied, whereas a bi‐layer structure of the protective oxides formed was determined. Copyright © 2013 John Wiley & Sons, Ltd.     

The electrochemical behavior and characterization of the anodic oxide film formed on titanium in NaOH solutions

Titanium dissolution and passivation were studied in NaOH aqueous solution using open-circuit potential, potentiodynamic and potentiostatic techniques. Potentiodynamic data showed that the active-passive transition involves active metal dissolution followed by formation of a poorly conducting passive oxide film that passivates the electrode. The critical current density varied with pH as d log<I> j</I><SUB>m</SUB>/d pH=-0.098 in the pH range 11.00–14.00, while the passivation potential is changed according to the following two features: at pH 10.55–13.00, d<I>E</I><SUB>m</SUB>/d pH=-0.06 V; and at pH 13.50–14.00, d<I>E</I><SUB>m</SUB>/d pH=-0.40 V. The apparent activation energy, E*, was calculated from the slope of the Arrhenius plot and was found to be 12.6 kJ mol^–1. Current-time transients showed that the growth of titanium oxide passive film is a diffusion-controlled process. XPS measurements indicated that the passive oxide film consists mainly of TiO₂ and a mixture of suboxides of Ti₂O₃ and TiO. Electronic Publication     

Opto-electronic properties of blue phosphorene oxide with and without oxygen vacancies

Blue phosphorene is an attractive nanomaterial that exhibits some remarkable optoelectronic properties. Various studies have verified its ability to adsorb gaseous compounds and, in particular, to dissociate O₂, forming covalent bonds between phosphorus and oxygen atoms. These covalent bonds could be the reason behind the oxidation reaction that affects the blue phosphorene in normal room conditions. Theoretically, it has been demonstrated that the blue phosphorene oxide (BPO) is just as stable as the blue phosphorene. Given that metallic oxides are widely used as catalyzers and gas sensors, this opens the possibility of the BPO being presented as a gas sensor as well. For all the above, in this work the optoelectronic properties of BPO were studied, along with the generation of the oxygen vacancies. The investigation was performed within the density functional theory (DFT). In the study of the oxygen vacancy, the formation energy was calculated, and the results are similar to the formation energies of oxygen vacancies in other known oxides. It was found that the BPO with a single vacancy has a favorable energetic stability. The characterization of the vacancy is achieved using the electronic structure and the optical response. Additionally, the analysis of the adsorption of a hydrogen atom on the BPO, and the subsequent formation of hydroxide is presented.     

Effect of anodic oxygen evolution on cell morphology of sulfuric acid anodic alumina films

Journal of Solid State Electrochemistry - The purpose of this work was to study and analyze the effect of electrolyte temperature and anodization voltage on cell morphology of thin films of...     

氧空位和磷掺杂协同增强铁钴基材料电解水催化性能

为了研发高效、稳定的电解水催化剂,我们以氧空位和磷掺杂为基础,通过原位浸泡生长和两步热处理的方法,在泡沫铁上合成具有氧空位和磷掺杂的纳米花结构作为析氢反应(HER)和析氧反应(OER)双功能电催化剂。CoFe₂O₄已被报道为一种很有前途的OER和氧还原反应(ORR)电催化剂,然而CoFe₂O₄在HER中表现出电导率差、电催化反应慢的特性。CoFe₂O₄中氧空位(Ov)的形成可以有效调控催化剂表面的电子结构,有助于产生更多的缺陷和空位,从而提高OER的活性。随后,引入磷原子填充在空位中,制备的P-Ov-CoFe₂O₄/IF在碱性电催化测试中展现出优异的HER和OER性能,在10 mA·cm^-2电流密度下HER和OER过电位仅为54和191 mV,Tafel斜率分别为57和54 mV·dec^-1,并具有良好的循环稳定性。     

The MOF/GO-based derivatives with Co@CoO core-shell structure supported on the N-doped graphene as electrocatalyst for oxygen reduction reaction

The development of nonprecious catalyst for oxygen reduction reaction (ORR) is important for the commercialization of the alkaline fuel cells (AFCs). Herein, we prepared a kind of Co-based nanoparticles (NPs) with a core-shell (Co@CoO) structure supported on the N-doped graphene (Co@CoO/NG) as an efficient ORR catalyst via simply pyrolyzing the ZIF-67 anchored on the synthesized graphene oxide (GO). The catalytic activity for ORR of the obtained Co@CoO/NG is comparable with the state-of-art Pt/C catalyst in terms of the onset and half-wave potential in the alkaline solution. In addition, the Co@CoO/NG exhibited an excellent ORR durability and antimethanol activity compared to the commercial Pt/C. This research would provide a simple strategy to prepare the high-performance nonprecious metal-based catalysts for AFCs.     

The influence of fluoride on the physicochemical properties of anodic oxide films formed on titanium surfaces

The influence of fluoride (and its concentration) on the electrochemical and semiconducting properties of anodic oxide films formed on titanium surfaces was investigated by performing electrochemical measurements (potentiodynamic/pontiostatic polarization, open circuit potential (OCP), and capacitance measurements) for a titanium/oxide film/solution interface system in fluoride-containing 1.0 M HClO(4) solution. On the basis of the Mott-Schottky analysis, and with taking into account both the surface reactions (or, say, the specifically chemical adsorption) of fluoride ions at the oxide film surface and the migration/intercalation of fluoride ions into the oxide film, the changes in the electrochemical behavior of titanium measured in this work (e.g., the blocked anodic oxygen evolution, the increased anodic steady-state current density, the positively shifted flat band potential, and the positively shifted film breakdown potential) were interpreted by the changes in the surface and the bulk physicochemical properties (e.g., the surface charges, surface state density, doping concentration, and the interfacial potential drops) of the anodic films grown on titanium. The fluoride concentrations tested in this work can be divided into three groups according to their effect on the electrochemical behavior of the oxide films: < or =0.001 M, 0.001-0.01 M, and >0.01 M. By tracing the changes of the OCP of the passivated titanium in fluoride-containing solutions, the deleterious/depassive effect of fluoride ions on the titanium oxide films was examined and evaluated with the parameter of the film breakdown time. It was also shown that the films anodically formed on titanium at higher potentials (>2.5 V) exhibited significantly higher stability against the fluoride attack than that either formed at lower potentials (<2.5 V) or formed natively in the air.     

Calorimetry of electrode reaction under linear sweep-current polarization

The mathematical-physical equation concerning the process of calorimetry of electrode reactions was deduced, and the corresponding solutions were obtained respectively for the period of the electrochemical polarization and that of the natural cooling. The calorimetry of the anodic oxidation of ferrocyanide to ferricyanide under linear sweep-current polarization was carried out, the obtained apparent enthalpy change of the electrode reaction agreed well with that obtained by the calorimetry with constant currents. The developed calorimetry with linear sweep-current and the data processing method are applicable for quick determination of apparent enthalpy changes of electrode reactions.     

Catalysis of the electrochemical oxygen reduction in room-temperature ionic liquids on a pyrolytic graphite electrode by iron-containing superoxide dismutase

Catalysis of the electrochemical oxygen reduction reaction (ORR) on a pyrolytic graphite electrode (PGE) by iron-containing superoxide dismutase (Fe-SOD) is investigated for the first time using cyclic voltammetry and electrochemical impedance spectroscopy. The study is carried out in three room-temperature ionic liquids (RTILs), namely, 1-ethyl-3-methylimidazolium tetrafluoroborate (EMIBF₄), 1-propyl-3-methylimidazolium tetrafluoroborate (PMIBF₄), and 1-butyl-3-methylimidazolium tetrafluoroborate (EMIBF₄). The results demonstrate that in EMIBF₄, Fe-SOD exhibits the most satisfactory catalysis for ORR, with the standard rate constant of ORR on bare PGE, k _s, increasing from 3.9 to 5.1 times 10⁻³ cm s⁻¹, while in PMIBF₄ and BMIBF₄ containing Fe-SOD k _s increases from 2.6 to 3.6 and from 1.4 to 2.2 times 10⁻³ cm s⁻¹, respectively. In addition to the increased k _s, adding Fe-SOD renders the formal potential of ORR more positive. To accelerate the electron transfer, multi-walled carbon nanotubes (MWCNTs) are employed to modify PGE, consequently, yielding the dramatically increased peak current and k _s. For MWCNTs-modified PGE in EMIBF₄ free of Fe-SOD, k _s increases from 3.9 to ∼7.1 times 10⁻³ cm s⁻¹. The ORR catalysis by Fe-SOD in the presence of Fe-SOD is also evidenced by the formal-potential shift in the positive direction. With MWCNTs accounting for the larger k _s and Fe-SOD being responsible for the formal-potential shift, the catalysis of ORR is satisfactory. Chronocoulmetry experiments proved that some Fe-SOD could be adsorbed on PGE. After analyzing the results, dismutation of superoxide anion O ₂ ⁻ by Fe-SOD is thought to be the main reason for the formal-potential shift. The different polarity of RTILs is probably partly responsible for different k _s obtained in different RTILs. Basing on an earlier proposition, the catalysis of ORR by MWCNTs in RTILs is discussed. Published in Russian in Elektrokhimiya, 2007, Vol. 43, No. 9, pp. 1137–1146. The text was submitted by the authors in English.     

Effect of graphene surface functionalization on the oxygen reduction reaction in alkaline media

1. Download : Download high-res image (189KB)
2. Download : Download full-size image

     

简易电沉积法制备CoFe-P催化剂用于高效析氧反应

开发低成本、高活性且稳定的非贵金属催化剂是实现大规模电解水制氢的关键所在。在此,我们通过简便、合理的电沉积法在泡沫镍(NF)上构建了一种具备超薄二维纳米片形貌的高度非晶相Co1Fe1-P薄膜用于高效催化析氧反应(OER)。在1.0mol·L^-1 KOH溶液中,所制备的Co1Fe1-P/NF催化剂在电流密度为10和100 mA·cm^-2处的过电位分别为274.4和329.5 mV,Tafel斜率仅为 45.3 mV·dec^-1,可以媲美商业 RuO₂催化剂。此外,Co1Fe1-P/NF 催化剂在 10 mA·cm^-2的 100 h 计时电压法测试和1 000次循环伏安法测试中均表现出卓越的催化稳定性。Co1Fe1-P/NF催化剂优秀的催化活性归因于其独特的形貌、高度非晶相结构提供的低能垒、优化的电子结构以及钴磷化物和铁磷化物的强协同效应。     

简易电沉积法制备CoFe-P催化剂用于高效析氧反应

开发低成本、高活性且稳定的非贵金属催化剂是实现大规模电解水制氢的关键所在。在此,我们通过简便、合理的电沉积法在泡沫镍(NF)上构建了一种具备超薄二维纳米片形貌的高度非晶相Co1Fe1-P薄膜用于高效催化析氧反应（OER）。在1.0mol·L^-1 KOH溶液中,所制备的Co1Fe1-P/NF催化剂在电流密度为10和100 mA·cm^-2处的过电位分别为274.4和329.5 mV,Tafel斜率仅为45.3 mV·dec^-1,可以媲美商业RuO₂催化剂。此外,Co1Fe1-P/NF催化剂在10 mA·cm^-2的100 h计时电压法测试和1 000次循环伏安法测试中均表现出卓越的催化稳定性。Co1Fe1-P/NF催化剂优秀的催化活性归因于其独特的形貌、高度非晶相结构提供的低能垒、优化的电子结构以及钴磷化物和铁磷化物的强协同效应。     

Study of kinetics of reaction of titanium raw materials with sulphuric acid

The reaction of ilmenite titanium raw materials with sulphuric acid has been studied in a non-isothermal-non-adiabatic type calorimeter. The influence of different starting conditions, temperature and ilmenite particle-size distribution on the thermo-kinetics of the reaction was investigated. A kinetic model is presented for this heterogeneous system for a specified ilmenite particle-size distribution and starting temperature. On the basis of this model and experimentally determined parameters it it possible to analyse by simulation the autothermic reaction of digestion of different titanium ores with sulphuric acid.     

Electrocatalytic behavior of electroless Ni-P alloys for the oxygen evolution reaction

The structural and morphological characteristics of electroless nickel phosphorous films (P content from 4.0 to 13.8 at %) are described. Different treatments such as heat (400°C, 1 h) or electrochemical (anodizing at 0.5 V vs. SCE followed by multi-cycle polarization) are employed and their effect on the alloys properties is analyzed using x-ray diffraction and atomic force microscopy. Information on the performance of the as-deposited and treated electroless Ni-P coatings as anodes for oxygen evolution reaction, in alkaline media, is taken from the steady state polarization curves and the correspondent Tafel slopes. The data shows the importance of the deposit crystalline nature and of the electrochemical treatment on the formation of β-Ni(OH)₂ and subsequently β-Ni(OOH), crucial for obtaining Ni-P films with good electrocatalytic properties. Published in Russian in Elektrokhimiya, 2006, Vol. 42, No. 12, pp. 1427–1434. Based on the report delivered at the 8th International Frumkin Symposium “Kinetics of the Electrode Processes.” October 18–22, 2005, Moscow. The text was submitted by the authors in English.     

活性钛与芳基丙酮的还原偶合反应

羰基化合物还原偶合是形成碳-碳键的一种重要方法。本文首次发现此类反应的产物不仅与反应物本身的结构和还原试剂体系有关，还与操作次序有很大关系，且在活性钛表面反应。     

三相电极法研究液/液界面离子转移的进展

三相电极法作为研究液/液界面离子转移的一种新方法,具有简单、快速、经济的特点。文章回顾了液/液界面离子转移的发展历史,介绍了三相电极法的实验原理,并对其在电化学中的研究进展和应用进行了评述,引用文献48篇。