Broad bandwidth interference filter-stabilized external cavity diode laser with narrow linewidth below 100kHz

Interference filter-stabilized external cavity diode lasers(ECDLs) have properties of simple configurations, high stabilities, and narrow linewidths. However, the interference filter used in common ECDL designs requires an ultra-narrow bandwidth(about 0.3 nm) to achieve mode selection, that is considerably expensive and not yet available for a wide range of wavelengths. In this paper, a robust ECDL using an available broad bandwidth(about 4 nm) interference filter as the wavelength discriminator is constructed and tested. The ECDL demonstrated a narrow Lorentzian fitted linewidth of 95 kHz and a spectral purity of 2.9 MHz. The long-term frequency stability of the ECDL reaches 5.59×10~(-12).     

扫频光学相干层析成像系统的波数校正与相位测量研究

相位敏感光学相干层析成像(OCT)系统可以用于高灵敏度的相位探测,在细胞分析、材料检测等方面具有重要应用,但扫频光源的不稳定性会影响扫频OCT系统的相位测量精度.本文提出了一种基于马赫-曾德尔干涉仪(MZI)时域相位信息的波数校正方法.利用MZI时域包裹相位的互相关运算确定各采集波数序列的相对偏移量,鉴于时域包裹相位的非严格周期特征,可确定偏移量的大小不受限制.依据相对偏移量对各序列信号进行时域同步,并基于同步后的MZI时域解包裹相位实施待测干涉信号在位相域的等间隔重采样.基于所提出的波数校正方法,实施了各扫频序列波数偏移量的校正,开展了基于位相信息的光程重复性测量实验.结果表明,即使在不稳定扫频光源的前提下,也能获得高精度的相位测量结果.     

Irregular phase slipping in a model for a laser with injected signal

In a model for a single mode laser with injected signal we find irregular pulsing of the output signal. During the turbulent time intervals the relative phase between the internal and the external field slips by an integer multiple of 2pi, where the multiplicity varies irregularly from pulse to pulse. Between the pulses, in the laminar time intervals, the relative phase is locked. We compare this behavior with the results of various other laser models. By the investigation of this interesting mechanism for the creation of phase chaos in a driven oscillator, we learn which properties are responsible for the irregular interruption of the phase locking. (c) 1997 American Institute of Physics.     

Sub-100 kHz repetition rate erbium-doped fiber laser in anomalous dispersion regime

We propose and demonstrate a simple but efficient way to generate low repetition rate pulses in an erbium-doped fiber ring laser by using self-pulsing technique. About 2.25 km long single mode fiber is used to elongate in the cavity, providing large anomalous cavity dispersion in the wavelength region around 1550 nm. Self pulses at a repetition rate of 85.3 kHz with single pulse energy as high as 110 nJ are efficiently obtained on the nanosecond time scale. The experimental results demonstrate that the self-pulse fiber laser operating in the anomalous dispersion regime can also realize high-energy pulses at a very low pulse repetition rate.     

Cavity-enhanced absorption spectroscopy with a rapidly swept diode laser

Cavity-enhanced absorption spectroscopy is explained in terms of the transmission function of a rapidly swept interferometer, and the integrated transmission is shown to be proportional to the cavity ringdown time. The technique is demonstrated on the b¹Σ_g ⁺-X³Σ_g ^-  (1,0) band in molecular oxygen at 687 nm using a tunable diode laser and a relative-ly high-Q optical cavity (finesse ≈4000). A detection limit of 3×10^-8 cm^-1 s^1/2 is achieved for a 0.8 cm^-1 scanning range. Received: 24 June 2002 / Revised version: 5 August 2002 / Published online: 15 November 2002 RID="*" ID="*"Corresponding author. Fax: +44-1865/275410, E-mail: peverall@physchem.ox.ac.uk     

Single-frequency Er:YAG ceramic pulsed laser with frequency stability close to 100 kHz

A single-frequency 1645 nm pulsed laser with frequency stability close to 100 kHz was demonstrated. The laser oscillator is injection-seeded by a single-frequency narrow linewidth Er∶Y₃Al₅O₁₂(Er:YAG) nonplanar ring oscillator and frequency stabilized by the modified Pound–Drever–Hall method. The pulse repetition rate can be set from 100 to 500 Hz with the frequency stability from 82.72 kHz to 134.44 kHz and pulse energy from 9.84 mJ to 19.55 mJ. To our knowledge,...     

基于界面信号的扫频光学相干层析成像系统相位矫正方法

由于扫频光源的采集触发信号和采样时钟信号存在时间上的随机延时,导致扫频光学相干层析成像(SS-OCT)系统干涉信号光谱的整体错移,进而引发OCT空间域信号的相位跳变,阻碍了基于相位信息的功能成像.为了获得稳定的相位,便于开展功能OCT的研究,提出了一种基于界面信号的数字相位矫正方法.对界面附近相邻A-line间同一深度的相位信号进行差分运算,计算得到相位跳变的A-line位置与光谱错移量(以像素为单位),然后在原始干涉信号上对齐光谱,重新傅里叶逆变换,得到矫正后的复信号.该数字矫正算法不会引入额外的相位噪声,可以实现OCT信噪比受限的相位探测.通过对反射镜、荧光板和小鼠脑皮层血流的多普勒成像验证了该方法的可行性.     

Use of modal energy transfer as a new damping device with controllable bandwidth

This paper presents a new design of nonlinear dynamic absorber (NDA) using the phenomenon of modal energy transfer between the symmetric mode and the anti-symmetric mode of a curved beam. It can reduce the resonance vibration of a primary structure with a controllable operational frequency range. The energy transfer is initiated by an autoparametric vibration and the excitation force required is lowest when the ratio of the resonance frequencies of the first symmetric mode (ω₁) and first anti-symmetric mode (ω₂) is close to 2.The resonance frequency of the first anti-symmetric mode (ω₂) can be altered to control the operational frequency range. The autoparametric vibration response can be used to create an energy-dissipative region with a controllable bandwidth. It is also possible to create a non-dissipative region in between two dissipative regions. This is useful for providing damping for a conventional dynamic absorber without adding high damping material. The damping is due to the dissipation of energy to anti-symmetric mode. Numerical calculations indicate that the resonance vibration of a primary structure can be successfully reduced using this approach. The results are verified with experimental data.     

Frequency-locked tunable LD laser with a broad bandwidth

Using lock-in amplifer and proportional, integral, and derivative (PID) electric circuit, the frequency of diode laser is stabilized on a highly mechanical stable Fabry-Perot (FP) cavity transmission peak. When the frequency locking system is on, the frequency tunable range of the laser is about 4 GHz around the D1 transition of Rb. The laser frequency tuning is implemented by scanning the FP cavity length. The fluctuation of frequency of the output laser is less than 1 MHz, and the drift of the center frequency is less than 1.5 MHz in 1.5 min. This system has great potential of the application in the experimental investigation of the interaction between light and atoms, especially, for the case of far off the atomic resonance.     

Phase calculation with a swept source in optical coherence tomography: Jitter influence

An analysis of phase modifications introduced by laser jitter in frequency-domain optical coherence tomography (OCT) is described. It is shown that a 1D spurious phase function is introduced as a consequence of this phenomenon. This phase function is added to any other introduced by the object under analysis causing a superposition of both. The result may impose some limitations for unambiguous determination of phase changes of objects. Experimental and theoretical results are presented.     

Postponed bifurcations of a swept parameter ring laser model with additive white noise

We have constructed an electronic circuit model of a single mode ring laser with additive white noise. Our measurements of the time evolution of the statistical densities and the distribution of bifurcation times are in good agreement with recent results obtained by digital integrations of the analogous Fokker-Planck equation due to Broggi, Colombo, Lugiato and Mandel.     

Generating controllable atom-light entanglement with a Raman atom laser system

We introduce a scheme for creating continuous variable entanglement between an atomic beam and an optical field, by using squeezed light to outcouple atoms from a Bose-Einstein condensate via a Raman transition. We model the full multimode dynamics of the atom laser beam and the squeezed optical field and show that, with appropriate two-photon detuning and two-photon Rabi frequency, the transmitted light is entangled in amplitude and phase with the outcoupled atom laser beam. The degree of entanglement is controllable via changes in the two-photon Rabi frequency of the outcoupling process.     

Neodymium-glass laser with a π-shaped lasing pulse of controllable duration

Journal of Applied Spectroscopy -     

液芯光纤中基于多线抽运调制的带宽可控平顶布里渊增益谱

提出在CS₂/CCl₄混合介质液芯光纤中利用多线抽运调制 技术实现带宽可控平顶布里渊增益谱的方法, 理论研究了抽运光谱线间距、谱线强度和芯液介质混合比对布里渊增益谱的影响, 得到了带宽可控平顶增益谱的条件. 结果表明, 采用一个强度或相位调制器, 基于单频和多频调制技术产生2–9条抽运光谱线, 通过控制谱线间距和各谱线强度比, 并改变CS₂体积分数, 获得了增益带宽在50 MHz–2 GHz 范围内可控的平顶增益谱. 该方法操作简便、带宽调控范围大, 可用于高增益低畸变布里渊放大, 满足微弱光信号探测和慢光系统的应用需求. 关键词： 受激布里渊散射 布里渊增益谱 多线抽运调制 液芯光纤     

光源对激光超声信号特性的影响分析

通过已搭建好的激光超声检测实验平台,在保持相同激光脉冲能量和相同探测位置的条件下,重点研究了点光源与线光源产生的超声信号的特点和区别。研究了不同探测位置点光源与线光源激发出的超声信号幅值以及产生的超声信号波形。实验发现:在同一探测位置下,将点光源换成线光源后,产生的超声信号幅值由1.3 V提高到1.7 V,提高了0.4 V;在探测位置逐渐增大的情况下,点光源激发出超声信号幅值的衰减幅度为75.78%,而线光源激发出的超声信号幅值的衰减幅度为34.92%。结果表明,在功率密度相同的情况下,线光源产生的超声信号要比点光源产生的超声信号幅值提高40.86%,产生较强的表面波,提高了信噪比。     

Tunable and switchable dual-wavelength passively mode-locked fiber ring laser with high-energy pulses at a sub-100 kHz repetition rate

We demonstrate a tunable and switchable dual-wavelength passively mode-locked fiber ring laser in the anomalous dispersion regime that generates high-energy pulses at a sub-100 kHz repetition rate. The nonlinear polarization rotation (NPR) technique is employed in this configuration to allow for passively mode-locked operation. By exploiting the intensity-dependent loss caused by NPR, the mode competition could be efficiently alleviated. Moreover, taking advantage of the intrinsic spectral filter induced by the intracavity birefringence, the dual-wavelength separations as well as the wavelength lasing locations could be flexibly tuned by properly rotating the polarization controller. With a repetition rate of 85.8 kHz, the laser delivers the single pulse energy of 198 nJ at a pump power of 250 mW. The combination of high per-pulse energy and flexible tunability in this fiber laser is useful for practical applications.     

Realization of low frequency and controllable bandwidth squeezing based on a four-wave-mixing amplifier in rubidium vapor

We experimentally demonstrate the creation of two correlated beams generated by a nondegenerate four-wave-mixing amplifier at λ=795 nm in hot rubidium vapor. We achieve intensity difference squeezing at frequencies as low as 1.5 kHz which is so far the lowest frequency to observe squeezing in an atomic system. The squeezing spans from 5.5 to 16.5 MHz with a maximum squeezing of -5 dB at 1 MHz. We can control the squeezing bandwidth by changing the pump power. Both low frequency and controllable bandwidth squeezing show great potential in sensitivity detection and precise control of the atom optics measurement.     

相位调制激光多普勒频移测量方法的改进

本文对现有相位调制激光多普勒频移测量方法进行了改进,通过定义新的鉴频参量来同时利用相位调制信号直流和交流分量中的有用信息进行多普勒频移测量.由于相位调制信号直流分量中包含着调制信号光的Fabry-Perot干涉仪光强透过率,所以这一改进本质上是将基于Fabry-Perot干涉仪的边缘技术激光多普勒频移测量方法的优势引入到相位调制测量方法中,以提高其自身的性能.理论上证明改进后的相位调制激光多普勒频移测量方法无需对信号光的光强进行测量,所以可以进一步简化探测系统的结构和较少噪声混入的通道.另外,通过对改进前后鉴频和测量灵敏度曲线进行对比,还证明了其具有更高的测量灵敏度和动态范围.实验上对硬目标反射的频移可控信号光进行测量,不但证明了理论的正确性,而且证明了改进后的相位调制激光多普勒频移测量方法,测量动态范围提高约1倍,测量标准偏差降低约35%.     

Continuous operation up to 3 kHz in a discharge-pumped XeCl excimer laser

Continuous operations at a high repetition rate up to 3 kHz for discharge-pumped XeCl excimer laser are presented. The dependence of the clearing ratio on laser-gas pressure and input energy densities is studied. It was found that suitable laser-gas pressures minimize the clearing ratio for various input-energy densities. It is also shown that few density disturbances in the discharge region are induced by gas heating in a discharge-pumped XeCl excimer laser with low input-energy density