Synthesis of 4-arm methyl methacrylate star polymer by atom transfer radical polymerization

The synthesis of 4-arm methyl methacrylate star polymer had been achieved successfully by atom transfer radical polymerization using CuCl as catalyst, 2, 2′-bipyridyl as ligand and pentaerythritol tetrakis (2-bromoisobutyrate) as the initiator. The star polymer was characterized by ¹H-NMR and GPC, by which the precise 4-arm structure of the PMMA was confirmed. __________ Translated from Journal of Shaanxi Normal University (Natural Science Edition), 2008, 36(2) (in Chinese)     

Synthesis of methacrylate polymer bearing cyanate groups and its chemoselective reaction with amines

A novel reactive polymer containing cyanate groups in the side chain was prepared by free radical polymerization of a cyanate‐containing monomer, 2‐(4‐cyanatophenyl)ethyl methacrylate ( 1 ). The monomer 1 and its polymer, poly[2‐(4‐cyanatophenyl)ethyl methacrylate] (PCPMA), were stable under the air for a long period. The copolymerization of 1 and methyl methacrylate provided the corresponding copolymers with various cyanate contents. The availability of the cyanate‐containing polymers as a reactive polymer was investigated. Model reaction using 4‐cyanatotoluene revealed that a cyanate group reacted with aliphatic amines, whereas no reaction occurred in the presence of water, alcohols, and aromatic amines under mild conditions. Post‐functionalization of PCPMA was demonstrated using aliphatic amines or diamines. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 699–706     

Synthesis of silsesquioxane nanocomposites

In order to investigate the effect of presence of well defined nano-sized inorganic particles on the molecular mobility a conformation statistics of polymer chains, well defined polystyrene (PS) and poly(methyl methacrylate) (PMMA) macromolecules containing polyhedral oligomeric silsesquioxanes nanoparticles (POSS) were synthesized by copper-mediated atom transfer radical polymerization (ATRP). Two approaches were used for the synthesis — the first involves POSS as the initiator of ATRP; the second way considers an addition of POSS to the polymer (prepared by ATRP) with an appropriate functional group. Kinetics of polymerization was determined using common analytical methods and it was compared to the polymerizations initiated by low-molecular weight initiators, regarding the polymerization rate, initiation efficiency and polydispersity of the polymer. Efficiency of the initiation with POSS-containing initiators was low, causing remnants of inseparable free POSS in polymer. The second approach bypassed these disadvantages —POSS is connected to the polymer through a pending allyl group using the very efficient hydrosilylation reaction. Presented at the 1st Bratislava Young Polymer Scientists Workshop, Bratislava, 20–23 August 2007.     

Graft copolymerization of methyl methacrylate on polystyrene backbone through nitroxide-mediated photo-living radical polymerization

Polystyrene-graft-poly(methyl methacrylate) (PSt-graft-PMMA) was prepared by the nitroxide-mediated photo-living radical polymerization using poly(4-vinylbenzyl-4-oxy-2,2,6,6-tetramethylpiperidine-1-oxyl-ran-styrene) (P(VTEMPO-r-St)) as the macromediator. The bulk polymerization of methyl methacrylate was performed at room temperature by irradiation using a high-pressure mercury lamp with P(VTEMPO-r-St) as the mediator having the molar ratio of VTEMPO/St unit = 0.40/0.60 and the molecular weight of Mn = 21,700 and the (2RS,2′RS)-azobis(4-methoxy-2,4-dimethylvaleronitrile) as the initiator in the presence of the (4-tert-butylphenyl)diphenylsulfonium triflate as the photo-acid generator. The polymerization proceeded via a controlled polymerization mechanism because both the first-order time-conversion plots and the conversion-molecular weight plots showed linear increases. It was found that all the VTEMPO units supported the controlled PMMA chains by ¹H NMR analysis because the molar ratio of the VTEMPO at the terminal chain end to the 1-cyano-3-methoxy-1,3-dimethylbutyl group at the initiation chain end of the PMMA was unity.     

Photo-controlled/living radical polymerization of tert-butyl methacrylate in the presence of a photo-acid generator using a nitroxide mediator

The photo-controlled/living radical polymerization of tert-butyl methacrylate was performed using a (2RS,2′RS)-azobis(4-methoxy-2,4-dimethylvaleronitrile) initiator and a 4-methoxy-2,2,6,6-tetramethylpiperidine-1-oxyl (MTEMPO) mediator in the presence of a (4-tert-butylphenyl)diphenylsulfonium triflate photo-acid generator. The bulk polymerization was carried out at 25 °C by irradiation with a high-pressure mercury lamp. Whereas the polymerization in the absence of MTEMPO produced a broad molecular weight distribution, the MTEMPO-mediated polymerization provided a polymer with a comparatively narrow molecular weight distribution around 1.4 without elimination of the tert-butyl groups. The living nature of the polymerization was confirmed on the basis of the linear correlations for the first-order time–conversion plots and conversion–molecular weight plots in the range below 50% conversion. The block copolymerization with methyl methacrylate also supported the livingness of the polymerization based on no deactivation of the prepolymer.     

Fluorescence probes for polymerization reactions: Bulk polymerization of styrene,n-butyl methacrylate,ethyl methacrylate,and ethyl acrylate

Julolidine malononitrile 3 was used as a fluorescent probe for high-conversion (free-radical) bulk polymerization of methyl methacrylate, ethyl methacrylate, n-butyl methacrylate, ethyl acrylate, styrene, and the copolymerization of styrene/n-butyl methacrylate. The fluorescence of the probe increased gradually as polymer conversion increased. This was followed by an abrupt rise in fluorescence intensities by a factor of 3 to 40 depending on the polymer formed. Finally the fluorescence intensities leveled off as the polymer limiting conversion was reached. The polymerization region in which fluorescence intensity increases sharply seems to correspond to the increase of the rigidity of the medium at the glass transition. A correlation between the limiting quantum yield of fluorescence of the dye and the polymer glass transition T_g and expansion coefficient α was found. These results were interpreted in terms of rotation-dependent nonradiative decay which links the excited-state conformation to the rigidity of the medium.     

Synthesis of poly(methyl methacrylate)-<Emphasis Type="Italic">block</Emphasis>-poly(tetrahydrofuran) by photo-living radical polymerization using a 2,2,6,6-tetramethylpiperidine-1-oxyl macromediator

The synthesis of a poly(methyl methacrylate)-block-poly(tetrahydrofuran) (PMMA-b-PTHF) diblock copolymer was attained by the photo-living radical polymerization of methyl methacrylate using 2,2,6,6-tetramethylpiperidine-1-oxyl (TEMPO) supported on the chain end of poly(tetrahydrofuran) (PTHF) as the macromediator. The polymerization was performed at room temperature by 2,2′-azobis(4-methoxy-2,4-dimethylvaleronitrile) as an initiator in the presence of bis(alkylphenyl)iodonium hexafluorophosphate as a photo-acid generator to produce the diblock copolymer consisting of poly(methyl methacrylate) (PMMA) and PTHF blocks connected through the TEMPO. The polymerization was confirmed to proceed in accordance with a living mechanism based on linear correlations for three different plots of the first order time-conversion, the molecular weight of the copolymer versus the monomer conversion, and the molecular weight versus the reciprocal of the initial concentration of the initiator. The molecular weight distribution of the block copolymer was dependent on the molecular weight of the macromediator based on the miscibility of PMMA and PTHF.     

Controlled radical polymerization of methacrylates of various structures in the presence of the AIBN-FeCl3-N,N-dimethylformamide catalytic system

The controlled radical polymerization of methyl methacrylate, 2-ethoxyethyl methacrylate, and tert-butyl methacrylate conducted via atom-transfer radical polymerization in the presence of the AIBN-FeCl₃· 6H₂O-N,N-dimethylformamide catalytic system is studied. For all the systems under study, the rate of reaction is first order with respect to the monomer concentration. The number-average molecular mass of the polymers linearly increases with conversion, and their polydispersity indexes are below 1.6. The rate of polymerization decreases in the following sequence: 2-ethoxyethyl methacrylate > methyl methacrylate > tert-butyl methacrylate. The presence of ω-terminal chlorine atoms in polymer macromolecules is confirmed by ¹H NMR spectroscopy and through the block copolymerization of methyl methacrylate with a poly(ethoxyethyl methacrylate)-based macroinitiator.     

Effects of ligands on the “living” radical polymerization initiated by the aged Cr2+ plus benzoyl peroxide system

The “living” radical polymerization of methyl methacrylate with the aged Cr²⁺ plus benzoyl peroxide (BPO) system in the presence of various amines as ligand has been studied in N,N′-dimethylformamide. Aliphatic amines such as ethylenediamine diminished the rate of polymerization, while dipyridyl (dipy) and o-phenanthroline (phen) accelerated the polymerization rate as follows: phen > dipy > pyridine ? none. Specifically, the rate of polymerization in the presence of phen had a maximum value at [phen]/[Cr²⁺] = 0.5. The retardation of polymerization by aliphatic amines was explained by the interaction of BPO with free and coordinated amines. The latter result may support the mechanism involving the complexed radical proposed for the living radical polymerization with the aged Cr²⁺ + BPO system. In the presence of phen the effects of aging period and aging temperature as well as polymerization temperature were studied and the nature of complexed radicals is discussed.     

Cellulose acetate/poly(methyl methacrylate) interpenetrating networks: synthesis and estimation of thermal and mechanical properties

IPN-type composites consisting of cellulose acetate (CA) and poly(methyl methacrylate; PMMA) were successfully synthesized in film form. In this synthesis, a mercapto group (SH)-containing CA, CA-MA, was prepared in advance by esterification of CA with mercaptoacetic acid, and then intercomponent cross-linking between CA-MA and PMMA was attained by thiol–ene polymerization of methyl methacrylate (MMA) onto the CA-MA substrate. For comparison, polymer synthesis was also attempted to produce a semi-IPN type of composites comprising CA and cross-linked PMMA, via copolymerization of MMA and ethylene glycol dimethacrylate as cross-linker in a homogeneous system containing CA solute. Thermal and mechanical properties of thus obtained polymer composites were investigated by differential scanning calorimetry, dynamic mechanical analysis, and a tensile test, in correlation with the mixing state of the essentially immiscible cellulosic and methacrylate polymer components. It was shown that the specific IPN technique using thiol–ene reactions usually resulted in a much better compatibility-enhanced polymer composite, which exhibited a higher tensile strength and even an outstanding ductility without parallel in any film sample of CA, PMMA, and their physical blends.     

Nitroxide-mediated photo-controlled/living radical polymerization of ethyl acrylate

The nitroxide-mediated photo-controlled/living radical polymerization of ethyl acrylate was attained using (2RS,2′RS)-azobis(4-methoxy-2,4-dimethylvaleronitrile) as the initiator, 4-methoxy-2,2,6,6-tetramethylpiperidine-1-oxyl as the mediator, and (4-tert-butylphenyl)diphenylsulfonium triflate as the photo-acid generator. The photopolymerization was performed in acetonitrile at room temperature by irradiation with a high-pressure mercury lamp. The molecular weight distribution of the resulting polymer decreased as the monomer concentration decreased. It was confirmed that the polymerization was controlled on the basis of the linear correlations for the first-order time-conversion plots and the plots of the molecular weight vs. the reciprocal of the initial concentration of the initiator, although the conversion–molecular weight plots did not show a completely linear correlation. The block copolymerization with methyl methacrylate accompanied by no deactivation of the growing polymer chain end supported the livingness of the polymerization.     

Synthesis of central functionalized asymmetric triblock copolymers for surface modification and switchable surface properties

Well‐defined central functionalized asymmetric triblock copolymers (CFABC) were designed as a new type of polymer‐brush surface modifier with a short central functionalized block that could form chemical bonds with a suitable substrate surface. A combination of sequential living anionic polymerization and polymer modification reactions was used for the synthesis of two CFABCs: polystyrene‐b‐poly(4‐hydroxystyrene)‐b‐poly(methyl methacrylate) (3) and polystyrene‐b‐poly(4‐urethanopropyl triethoxysilylstyrene)‐b‐poly(methyl methacrylate) (4). The central block of 3, poly(4‐hydroxystyrene), was synthesized with a protected monomer, p‐[(tert‐butyldimethylsilyl)oxy]styrene, for the polymerization step, and this synthesis was followed by the hydrolysis of the silyl protecting group. To obtain polymer 4, the phenol functionality in 3 was converted to triethoxysilyl groups by a quantitative reaction with isocyanato propyl triethoxysilane. Gel permeation chromatography and NMR characterization indicated that the block copolymers possessed controlled molecular weights and narrow molecular weight distributions. Preliminary atomic force microscopy and X‐ray photoelectron spectroscopy analysis of the polymer brushes were reported. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 3742–3750, 2000     

Photopolymerization of methyl methacrylate in the presence of tertiary amines

The sensitization effect of tertiary amines on the photopolymerization of methyl methacrylate was studied. N,N-Dimethylbenzylamine, triethylamine, and N,N-dimethylaniline increased the rate of polymerization in this order, but pyridine did not show any effect. A free-radical mechanism was confirmed by the tacticity of polymer, the retarding effect of hydroquinone, and the copolymer composition with styrene. On the basis of the detailed kinetics of the sensitized polymerization and the ultraviolet spectra of the reaction mixtures, a sensitization mechanism is proposed, in which the excited monomer and the amine form a complex and generate an initiating radical.     

Bis(3,6-di-tert-butylcatecholato)tin(IV) ditetrahydrofuranate in radical polymerization of methyl methacrylate

The effect of bis(3,6-di-tert-butylcatecholato)tin(IV) ditetrahydrofuranate (1) on the kinetic parameters of methyl methacrylate polymerization and on the molecular weight characteristics of polymers prepared was studied. According to EPR data, complex 1 can accept and eliminate the growing macroradicals in monomer media. This allows the lifetimes of the growing polymer chains to be controlled. The optimal temperature range for accomplishing controlled synthesis of polymer in the presence of complex 1 was determined. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 7, pp. 1314–1319, July, 2007.     

Living anionic homo- and block copolymerization of 2-(tert-butylamino)ethyl methacrylate

Anionic polymerization of 2-(tert-butylamino)ethyl methacrylate (tBAEMA), which bears an unprotected secondary amine moiety, has been investigated in THF at −78°C. The presence of lithium chloride has been shown to be desirable to afford narrow molecular weight distribution as well as a good agreement between theoretical and observed molecular weight. The living character of the polymerization has also been demonstrated, and the synthesis of block copolymers carried out successfully. They have been analyzed by SEC by adding a mixture of secondary and tertiary amines to the eluent (THF) so as to avoid any polymer adsorption during elution. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35 : 2035–2040, 1997     

Amine activators for the “cool” peroxide initiated polymerization of acrylic monomers

Two tertiary amines with a chemical structure rather similar to dimethyl-4-toluidine have been prepared and tested as activators for the free radical polymerization of methyl methacrylate. 4-Dimethylaminobenzyl alcohol, DMOH, was synthesized by reduction of the corresponding benzaldehyde. 4-Dimethylaminobenzyl methacrylate, DMMO, was synthesized by condensation of methacryloyl chloride with DMOH in the presence of triethylamine as catalyst. Kinetic studies of the bulk polymerization of methyl methacrylate initiated by the redox system BPO–amine have been carried out by differential scanning calorimetry at different temperatures in the interval 30–40°C. An increase of the overall rate constant, k, with increasing temperature was observed for all redox systems. The system BPO/DMT gave the highest values of k. The polymerizations catalyzed by DMOH and DMMO respectively gave lower values of the overall Arrhenius activation than that obtained with DMT. DMMO may participate in the polymerization not only as activator but also as an acrylic derivative which can be incorporated into the polymeric growing chains during the propagation step of the free radical polymerization. © 1996 John Wiley & Sons, Inc.     

Synthesis and electrooptic properties of side‐chain methacrylate polymers containing a new azophenylbenzoxazole chromophore

The synthesis and characterization of four methacrylate copolymers obtained by radical addition polymerization of methyl methacrylate as well as a new methacrylate azophenylbenzoxazole chromophore in percentages of 10, 30, 50, and 70% were explored. The copolymers were amorphous and showed glass‐transition temperatures ranging from 132 to 146 °C. High‐quality polymer films were easily obtained by spin coating from N‐methylpyrrolidone solutions. Polymer films spun cast on iridium tin oxide (ITO) substrates were used in the electro‐optic (EO) experiments to evaluate the EO coefficients r₃₃ using the reflection technique. The measured values fell in the range of 1.7–3.7 pm/V (laser incident wavelength of 1.552 μm) depending on the percentage of chromophore in the polymer. © 2001 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 1162–1168, 2001     

Atom transfer radical polymerization of styrene and methyl methacrylate catalyzed by FeCl2/iminodiacetic acid

The atom transfer radical polymerization of styrene and methyl methacrylate with FeCl₂/iminodiacetic acid as the catalyst system in bulk was successfully implemented at 70 and 110 °C, respectively. The polymerization was controlled: the molecular weight of the resultant polymer was close to the calculated value, and the molecular weight distribution was relatively narrow (weight‐average molecular weight/number‐average molecular weight ∼ 1.5). Block copolymers of polystyrene‐b‐poly(methyl methacrylate) and poly(methyl methacrylate)‐b‐poly(methyl acrylate) were successfully synthesized, confirming the living nature of the polymerization. A small amount of water added to the reaction system increased the reaction rate and did not affect the living nature of the polymerization system. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 4308–4314, 2000     

Effect of matrix polymerization conditions on the structure and adsorption properties of porous polymers on the basis of divinylbenzene,acrylonitrile, and methyl methacrylate

A comparative study was carried out on the matrix polymerization of divinylbenzene, acrylonitrile, and methyl methacrylate in SBA-15 silica mesoporous molecular sieves. The occupancy of the matrix mesopores by the starting monomer, the medium, the polymerization temperature and time as well as the means of removing the exotemplate were all found to affect the spatial organization and porous structure of the polymer materials. Surplus occupancy of the mesopores by the monomer (1–1.5), polymerization in vacuum, and an alkaline method for matrix removal were found to be optimal. IR spectroscopy was used to find the conversion of the starting polymer by following the relative change in intensity of the vinyl group bands. Translated from Teoreticheskaya i éksperimental'naya Khimiya, Vol. 44, No. 6, pp. 371–375, November–December, 2008.     

Multifunctional ATRP initiators: Synthesis of four‐arm star homopolymers of methyl methacrylate and graft copolymers of polystyrene and poly(t‐butyl methacrylate)

Tetrakis bromomethyl benzene was used as a tetrafunctional initiator in the synthesis of four‐armed star polymers of methyl methacrylate via atom transfer radical polymerization (ATRP) with a CuBr/2,2 bipyridine catalytic system and benzene as a solvent. Relatively low polydispersities were achieved, and the experimental molecular weights were in agreement with the theoretical ones. A combination of 2,2,6,6‐tetramethyl piperidine‐N‐oxyl‐mediated free‐radical polymerization and ATRP was used to synthesize various graft copolymers with polystyrene backbones and poly(t‐butyl methacrylate) grafts. In this case, the backbone was produced with a 2,2,6,6‐tetramethyl piperidine‐N‐oxyl‐mediated stable free‐radical polymerization process from the copolymerization of styrene and p‐(chloromethyl) styrene. This polychloromethylated polymer was used as an ATRP multifunctional initiator for t‐butyl methacrylate polymerization, giving the desired graft copolymers. © 2001 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 650–655, 2001