萤石结构TiO2的电子结构和光学性质

利用第一性原理计算了立方相萤石TiO₂的晶胞参数,能带结构和电子态密度.结果显示萤石TiO₂属于间接带隙半导体材料,其间接禁带宽度(Γ→X)E_g为2.07eV,比常见的金红石和锐钛矿TiO₂的禁带宽度窄.为了更清楚地了解萤石的光学性质,利用Kramers-Kronig色散关系,分别对萤石和金红石TiO₂的复介电常数、吸收率等参数进行了计算,并将二者结果做了 关键词： 2')" href="#">萤石结构TiO₂ 密度泛函理论 能带结构 光学性质     

萤石结构TiO2的电子结构和光学性质

利用第一性原理计算了立方相萤石TiO₂的晶胞参数，能带结构和电子态密度.结果显示萤石TiO₂属于间接带隙半导体材料，其间接禁带宽度(Γ→X)E_g为2.07eV，比常见的金红石和锐钛矿TiO₂的禁带宽度窄.为了更清楚地了解萤石的光学性质，利用Kramers-Kronig色散关系，分别对萤石和金红石TiO₂的复介电常数、吸收率等参数进行了计算，并将二者结果做了     

First-principles investigations on elastic, phonon and thermodynamic properties of SrB6 under pressure

The elastic, phonon and thermodynamic properties of the divalent alkaline-earth hexaboride SrB₆ are investigated by using plane-wave pseudopotential density functional theory method. The calculated structure parameters and bulk modulus are well consistent with the available experiment and theoretical data. The pressure dependences of elastic constants C_ij, bulk modulus B₀, shear modulus G, Young's modulus E and Poisson's ratio σ are also presented. With these elastic parameters, we investigate the mechanical stability and compressibility of SrB₆. For the thermodynamic properties, both phonon and quasi-harmonic Debye model methods are adopted. Through the comparison with experimental and other theoretical results, we found the method of quasi-harmonic Debye model is a little better. Moreover, the phonon dispersion relations are also obtained. It is found that there are two LO/TO splitting around 5 THz and 26 THz, respectively.     

First-principles study of electronic structures and optical properties of Cu, Ag, and Au-doped anatase TiO2

We perform first-principles calculations to investigate the band structure, density of states, optical absorption, and the imaginary part of dielectric function of Cu, Ag, and Au-doped anatase TiO₂ in 72 atoms systems. The electronic structure results show that the Cu incorporation can lead to the enhancement of d states near the uppermost of valence band, while the Ag and Au doping cause some new electronic states in band gap of TiO₂. Meanwhile, it is found that the visible optical absorptions of Cu, Ag, and Au-doped TiO₂, are observed by analyzing the results of optical properties, which locate in the region of 400-1000 nm. The absorption band edges of Cu, Ag, and Au-doped TiO₂ shift to the long wavelength region compared with the pure TiO₂. Furthermore, according to the calculated results, we propose the optical transition mechanisms of Cu, Ag, and Au-doped TiO₂. Our results show that the visible light response of TiO₂ can be modulated by substitutional doping of Cu, Ag, and Au.     

Elastic and thermodynamic properties of CaB6 under pressure from first principles

The elastic and thermodynamic properties of CsCl-type structure CaB₆ under high pressure are investigated by first-principles calculations based on plane-wave pseudopotential density functional theory method within the generalized gradient approximation (GGA). The calculated lattice parameters of CaB₆ under zero pressure and zero temperature are in good agreement with the existing experimental data and other theoretical data. The pressure dependences of the elastic constants, bulk modulus B (GPa), and its pressure derivative B′, shear modulus G, Young's modulus E, elastic Debye temperature Θ_B, Zener's anisotropy parameter A, Poisson ratios σ, and Kleinmann parameter ζ are also presented. An analysis for the calculated elastic constants has been made to reveal the mechanical stability of CaB₆ up to 100 GPa. The thermodynamic properties of the CsCl-type structure CaB₆ are predicted using the quasi-harmonic Debye model. The pressure-volume-temperature (P-V-T) relationship, the variations of the heat capacity C_V, Debye temperature Θ_D, and the thermal expansion α with pressure P and temperature T, as well as the Grüneisen parameters γ are obtained systematically in the ranges of 0-100 GPa and 0-2000 K.     

Optical properties of superhard BC5: First-principles calculations

BC₅ is a newly synthesized superhard material. We present a systematic investigation of optical properties of BC₅ in P3m1 and I-4m2 phases at ambient and high pressure in the framework of density functional theory with the generalized gradient approximation (GGA) in this paper. Optical properties such as dielectric function, refractive index, absorption, reflectivity and electron energy-loss spectrum are obtained successfully. The feature in the spectra of the optical parameters is discussed. Through calculation, we find BC₅ is optically anisotropic. Moreover, the dielectric function exhibits a large change at 70 GPa pressure for P3m1 BC₅ phase, but I-4m2 phase not, indicating the stable electronic structure that the I-4m2 phase possesses.     

First-principles study of La and Sb-doping effects onelectronic structure and optical properties of SrTiO3

The effects of La and Sb doping on the electronic structure and optical properties of SrTiO 3 are investigated by first-principles calculation of the plane wave ultra-soft pseudo-potential based on density functional theory. The calculated results reveal that corner-shared TiO 6 octahedra dominate the main electronic properties of SrTiO 3 , and its structural stability can be improved by La doping. The La 3+ ion fully acts as an electron donor in Sr 0.875 La 0.125 TiO 3 and the Fermi level shifts into the conduction bands (CBs) after La doping. As for SrSb 0.125 Ti 0.875 O 3 , there is a distortion near the bottom of the CBs for SrSb 0.125 Ti 0.875 O 3 after Sb doping and an incipient localization of some of the doped electrons trapped in the Ti site, making it impossible to describe the evolution of the density of states (DOS) within the rigid band model. At the same time, the DOSs of the two electron-doped systems shift towards low energies and the optical band gaps are broadened by about 0.4 and 0.6 eV for Sr0.875La0.125TiO3 and SrSb0.125Ti0.875O3 , respectively. Moreover, the transmittance of SrSb0.125Ti0.875O3 is as high as 95% in most of the visible region, which is higher than that of Sr0.875La0.125TiO3 (85%). The wide band gap, the small transition probability and the weak absorption due to the low partial density of states (PDOS) of impurity in the Fermi level result in the significant optical transparency of SrSb0.125 Ti0.875 O3 .     

β-Si3N4电子结构和光学性质的第一性原理研究

采用基于密度泛函的平面波赝势方法(PWP)和广义梯度近似(GGA)，计算了β相氮化硅(β-Si₃N₄)的电子结构和光学性质，得到的晶格常数、能带结构等均与实验结果较好符合.进一步还研究了β-Si₃N₄的光吸收系数以及禁带宽度随外压力的变化规律，为β-Si₃N₄材料在高压条件下的应用提供了理论参考. 关键词： β相氮化硅 电子结构 能带结构 光学性质     

Study on the photovoltaic property of Cu4SnS4 synthesized by mechanochemical process

Photovoltaic property of Cu₄SnS₄ (CTS) is studied by employing a superstrate solar cell structure of Mo/CTS/In₂S₃/TiO₂/fluorine-doped tin oxide (FTO) glass for the first time. The CTS absorber layer was prepared by a combination of mechanochemical and doctor blade processes. The annealing effects on the structural, optical and electronic properties of the CTS absorber layer were investigated. The novel CTS absorber layer shows conversion efficiency as high as 2.34% under the standard AM 1.5 condition.     

First-principles study of structure and nonlinear optical properties of CdHg(SCN)4 crystal

The geometric structure,electronic structure,and optical properties of CdHg(SCN)4 crystal are calculated by using the density functional perturbation theory and Green function screening Coulomb interaction approximation.The band gap of CdHg(SCN)4 crystal is calculated to be 3.198 eV,which is in good agreement with the experimental value 3.265 eV.The calculated second-order nonlinear optical coefficients are d_(14) = 1.2906 pm/V and d_(15) = 5.0928 pm/V,which are in agreement with the experimental results(d_(14)=(1.4 ±0.6) pm/V and d_(15)=(6.0 ±0.9) pm/V).Moreover,it is found that the contribution to the valence band mainly comes from Cd-4d,Hg-5d states,and the contributions to the valence band top and the conduction band bottom predominantly come from C-2p,N-2p,and S-3p states.The second-order nonlinear optical effect of CdHg(SCN)_4 crystal results mainly from the internal electronic transition of(SCN)~-.     

一种新型Ag3PO4/Ag/Ag2Mo2O7纳米线光催化剂：三元纳米复合物的光催化活性

Ag₃PO₄/Ag/Ag₂Mo₂O₇ composite photocatalyst was successfully prepared via an in situ precipitation method. The as-prepared Ag₃PO₄/Ag/Ag₂Mo₂O₇ nanocomposite included Ag₃PO₄ nanoparticles (NPs) as well as Ag NPs assembling on the surface of Ag₂Mo₂O₇ nanowires. Under visible light irradiation (λ>420 nm), the Ag₃PO₄/Ag/Ag₂Mo₂O₇ composite degraded rhodamine B (Rh B) efficiently and showed much higher photocatalytic efficiency than pure Ag₃PO₄, Ag₂Mo₂O₇, or Ag₃PO₄/Ag₂Mo₂O₇. It was elucidated that the excellent photocatalytic performance of Ag₃PO₄/Ag/Ag₂Mo₂O₇ for the degradation of Rh B under visible light could be ascribed to the high specific surface area, the extended absorption in the visible light region resulting from the Ag₃PO₄/Ag loading, and the efficient separation of photogenerated electrons and holes through the ternary heterostrucure composed of Ag₃PO₄, Ag and Ag₂Mo₂O₇.     

YFeO3的电子结构和光学性质的第一性原理研究

稀土正铁氧体YFeO₃呈正交钙钛矿结构,其晶体和纳米晶材料在电极材料、 传感器和光催化领域具有重要的应用价值.用平面波赝势方法,采用广义梯度近似、改进的Perdew-Burke-Emzerhof交换-关联势、 实空间超软赝势计算方案,研究了YFeO₃晶体的几何结构、电子结构和光学性质. 计算得到的晶格参量与报道的实验结果一致.通过对能带结构、态密度、介电函数、吸收系数和光电导率的计算和分析, 确定YFeO₃是直接能隙半导体,能隙E_g约为2.22 eV,阐明了YFeO₃晶体和纳米晶具有较好的可见光催化性能.     

Co掺杂MgF2电子结构和光学特性的第一性原理研究

基于密度泛函理论（DFT）的第一性原理平面波超软赝势方法,计算了Co掺杂MgF₂晶体的几何结构、电子结构和光学性质.结果表明,Co掺杂导致MgF₂晶体结构畸变,可能发生一种类四方和斜方型结构相变.由于Co原子的加入,体系的禁带宽度减小,可观察到半导体—金属性转变.计算也表明,Co掺杂对静态介电常数和光吸收系数有重要调制作用,所得结果与最近实验测量很好相符,揭示了Co:MgF₂体系在光学元器件方面的潜在应用. 关键词： 密度泛函理论（DFT） 第一性原理 超软赝势 2')" href="#">Co掺杂MgF₂     

N掺杂锐钛矿TiO2光学性能的第一性原理研究

用平面波赝势方法(PWP)计算了N掺杂锐钛矿型TiO₂前后的光学特性,即介电函数虚部ε₂(ω)，光学吸收系数I(ω)和反射率R(ω). 并从能带结构上解释了为什么掺N后锐钛矿型TiO₂的光学谱在2.93，3.56和3.97eV处相对掺杂前会出现3个峰值的原因. 从光谱图上分析得出，掺杂后TiO₂要发生红移现象，实验现象证实了这一结果. 关键词： N掺杂 2')" href="#">锐钛矿型TiO₂ 光学性能 第一性原理     

Effect of substrate temperature on microstructure and optical properties of single-phased Ag2O film deposited by using radio-frequency reactive magnetron sputtering method

Using a radio-frequency reactive magnetron sputtering technique,a series of the single-phased Ag2O films are deposited in a mixture of oxygen and argon gas with a flow ratio of 2:3 by changing substrate temperature(T s).Effects of the T s on the microstructure and optical properties of the films are investigated by using X-ray diffractometry,scanning electron microscopy and spectrophotometry.The single-phased Ag2O films deposited at values of T s below 200℃ are(111) preferentially oriented,which may be due to the smallest free energy of the(111) crystalline face.The film crystallization becomes poor as the value of T s increases from 100℃ to 225℃.In particular,the Ag2O film deposited at T s = 225℃ loses the 111 preferential orientation.Correspondingly,the film surface morphology obviously evolves from a uniform and compact surface structure to a loose and gullied surface structure.With the increase of T s value,the transmissivity and the reflectivity of the films in the transparent region are gradually reduced,while the absorptivity gradually increases,which may be attributed to an evolution of the crystalline structure and the surface morphology of the films.     

Optical properties of Mn-activated Na2SnF6 and Cs2SnF6 red phosphors

Alkaline hexafluorostantanate red phosphors Na₂SnF₆:Mn⁴⁺ and Cs₂SnF₆:Mn⁴⁺ are synthesized by chemical reaction in HF/NaMnO₄ (CsMnO₄)/H₂O₂/H₂O mixed solutions immersed with tin metal. X-ray diffraction patterns suggest that the synthesized phosphors have a tetragonal symmetry with the space group D_4h¹⁴ (Na₂SnF₆:Mn⁴⁺) and a trigonal symmetry with the space group D_3d³ (Cs₂SnF₆:Mn⁴⁺). Photoluminescence (PL) analysis, PL excitation (PLE) spectroscopy, and the Raman scattering techniques are used to investigate the optical properties of the phosphors. The Franck-Condon analysis of the PLE data yields the Mn⁴⁺-related optical transitions to occur at ∼2.39 and ∼2.38 eV (⁴A_2g→⁴T_2g) and at ∼2.83 and ∼2.76 eV (⁴A_2g→⁴T_1g) for Na₂SnF₆:Mn⁴⁺ and Cs₂SnF₆:Mn⁴⁺, respectively. The crystal field parameters (Dq) of the Mn⁴⁺ ions in the Na₂SnF₆ and Cs₂SnF₆ hosts are determined to be ∼1930 and ∼1920 cm⁻¹, respectively. Temperature-dependent PL measurements are performed from 20 to 440 K in steps of 10 K, and the obtained results are interpreted by taking into account the Bose-Einstein occupation factor. Comprehensive discussion is given on the phosphorescent properties of a family of Mn⁴⁺-activated alkaline hexafluoride salts.     

Structural and electronic properties of cubic SrHfO3 surface: First-principles calculations

Structural, electronic and chemical bonding properties of the (0 0 1) surface of cubic SrHfO₃ have been investigated with both SrO and HfO₂ termination using the plane-wave ultrasoft pseudopotential technique based on the first-principles density-functional theory. The relaxed structures of two slabs have been analyzed, which shows the interplanar distance of two slabs has the same changed trend. The electronic band structures and density of states of two slabs have been discussed, showing the reduced band gaps by comparison with those of bulk system. The chemical bonding between Sr and O between the surface layer and subsurface layer as well as Hf and O has been increased. The surface energy, work function and stability have been calculated, which indicates SrO-terminated slab is more stable.     

First-principles study of electronic and optical properties of N-doped SrHfO3

The plane-wave ultrasoft pseudopotential technique based on the first-principles density-functional theory (DFT) is used to investigate the doping effect of N substituting for O in cubic SrHfO₃. The calculated results show that the reaction from pure elements to final compounds is favorable and the final compounds are energetically stable. Electronic structure analysis shows the band gaps narrowing with the increase of N concentration due to the presence of the impurity state of N 2p on the top of the valence band and the acceptor energy levels above the Fermi energy, which may be responsible for the red-shift. Besides, the optical absorption edge has been gradually red shifted with increasing N concentration.     

Electronic structure and optical properties of Nb-doped Sr2TiO4 by density function theory calculation

This paper investigates the effect of Nb doping on the electronic structure and optical properties of Sr2TiO4 by the first-principles calculation of plane wave ultra-soft pseudo-potential based on density functional theory(DFT).The calculated results reveal that due to the electron doping,the Fermi level shifts into conduction bands(CBs) for Sr2 Nb x Ti1 x O4 with x=0.125 and the system shows n-type degenerate semiconductor features.Sr2TiO4 exhibits optical anisotropy in its main crystal axes,and the c-axis shows the most suitable crystal growth direction for obtaining a wide transparent region.The optical transmittance is higher than 90% in the visible range for Sr2 Nb 0.125Ti0.875O4.     

Electronic and optical properties of kesterite Cu2ZnSnS4 under in-plane biaxial strains: First-principles calculations

The electronic structures and optical properties of Cu₂ZnSnS₄ (CZTS) under in-plane biaxial strain were systematically investigated using first-principles calculations based on generalized gradient approximation and hybrid functional method, respectively. It is found that the fundamental bandgap at the Γ point decreases linearly with increasing tensile biaxial strain perpendicular to c-axis. However, a bandgap maximum occurs as the compressive biaxial strain is 1.5%. Further increase of compressive strain decreases the bandgap. In addition, the optical properties of CZTS under biaxial strain are also calculated, and the variation trend of optical bandgap with biaxial strain is consistent with the fundamental bandgap.