Model cell membranes: Techniques to form complex biomimetic supported lipid bilayers via vesicle fusion

Vesicle fusion has long provided an easy and reliable method to form supported lipid bilayers (SLBs) from simple, zwitterionic vesicles on siliceous substrates. However, for complex compositions, such as vesicles with high cholesterol content and multiple lipid types, the energy barrier for the vesicle-to-bilayer transition is increased or the required vesicle–vesicle and vesicle–substrate interactions are insufficient for vesicle fusion. Thus, for vesicle compositions that more accurately mimic native membranes, vesicle fusion often fails to form SLBs. In this paper, we review three approaches to overcome these barriers to form complex, biomimetic SLBs via vesicle fusion: (i) optimization of experimental conditions (e.g., temperature, buffer ionic strength, osmotic stress, cation valency, and buffer pH), (ii) α-helical (AH) peptide-induced vesicle fusion, and (iii) bilayer edge-induced vesicle fusion. AH peptide-induced vesicle fusion can form complex SLBs on multiple substrate types without the use of additional equipment. Bilayer edge-induced vesicle fusion uses microfluidics to form SLBs from vesicles with complex composition, including vesicles derived from native cell membranes. Collectively, this review introduces vesicle fusion techniques that can be generalized for many biomimetic vesicle compositions and many substrate types, and thus will aid efforts to reliably create complex SLB platforms on a range of substrates.     

Composition of supported model membranes determined by neutron reflection

We have investigated the formation of supported bilayers by coadsorption of dipalmitoyl phosphatidylcholine (DPPC) with the nonionic surfactant beta-D-dodecyl maltoside. The adsorption of mixed phospholipid-surfactant micelles on hydrophilic silica surfaces at 25 degrees C was followed as a function of bulk concentration by neutron reflection. Using chain-deuterated d(25)-beta-D-dodecyl maltoside and d(62)-DPPC, we demonstrate that it is possible to determine the composition of the bilayers at each stage of a sequential dilution process, which enriches the adsorbed layer in phospholipid and leads to complete elimination of the surfactant. The final supported bilayers have thicknesses of 51 +/- 3 A and are stable to heating to 37 degrees C once all surfactant has been removed, and the structures agree well with other published data on DPPC supported bilayers. The coadsorption of cholesterol in a DPPC-surfactant mixture was also achieved, and the location and volume fraction of cholesterol in the DPPC bilayer was determined. Cholesterol is located in a 18 +/- 1 A thick layer below the lipid headgroup region and leads to an increased bilayer thickness of 58 +/- 2 A at 26 mol % of cholesterol.     

Structure of spin-coated lipid films and domain formation in supported membranes formed by hydration

An atomic force and fluorescence microscopy investigation of the structure of spin-coated lipid films is presented. In the surface of the dry film, lipids are found to orient in a conformation where acyl chains are pointing outward while laterally the individual layers of the multilamellar film exhibit a dewetting pattern similar to what is found in polymer thin films. Hydration of the film in liquid water promotes detachment of bilayers from the surface while a single membrane remains on the mica substrate. This supported membrane is highly uniform and defect-free as compared to supported membranes prepared by conventional methods. It is further demonstrated that supported membranes of binary lipid mixtures prepared by this method exhibit gel-fluid domain coexistence in accordance with expectations from the phase diagrams.     

Shape transitions in lipid membranes and protein mediated vesicle fusion and fission

In the cell, the plasma membrane is often densely decorated by transmembrane proteins. The morphology and dynamics of the membrane are strongly influenced by the presence of proteins. In this paper, we use a coarse-grained model to explore the composite membrane-protein system and develop a simulation methodology based on thermodynamic integration to examine free energy changes during membrane shape transitions. The authors show that a critical concentration of conical membrane proteins or proteins with nonzero spontaneous curvature can drive the formation of small vesicles. The driving force of vesicle budding stems from the preference of proteins to gather in regions of high curvature. A sufficiently high concentration of proteins therefore can influence the topology of the membrane. The biological significance of our results is discussed.     

Solute- and temperature-responsive "smart" grafts and supported membranes formed by covalent layer-by-layer assembly

Polymers like poly(N-isopropylacrylamide) (PNIPAM) exhibit lower critical solution temperature (LCST) behavior. A variety of reports have shown that brush grafts of PNIPAM on surfaces exhibit similar temperature responsiveness. We recently described an alternative synthetic approach to such surfaces that affords surfaces with similar LCST-like behavior. We also noted how such surfaces' wettability can change in response to the identity and concentration of solutes. Here we show that this synthetic procedure can be extended to glass surfaces and to more complex surfaces present in porous glass frits. Functionalized glass surfaces exhibit solute-dependent wetting behavior analogous to that previously reported. We further show that the resulting responsive nanocomposite grafts on such frits exhibit "smart" responsive permeability with a greater than 1000-fold difference in permeability to water versus aqueous solutions of sodium sulfate. This "smart" permeability is ascribed to the solute-dependent wettability behavior of the responsive PNIPAM component of the nanocomposite graft, which is sensitive both to the identity and concentration of the solute anion and to temperature.     

Planar block copolymer membranes by vesicle spreading

An easy route to planar solid-supported polymer membranes by vesicle spreading is described. Pre-organized poly(butadiene)-block-poly(ethylene oxide)(PB-PEO) assemblies were spread on two different supports, i.e. strongly hydrophilic glass surfaces and ultrasmooth gold substrates. Polymer membranes were produced on a hydrophilic support by spreading hydroxyl-functionalized polymer vesicles, while covalently immobilized polymer membranes were obtained by spreading LA-functionalized polymer vesicles on gold substrates. Covalently bound membranes were further incubated with the peptide polymyxin B. Interactions with the polymer membrane were detected by EIS. These systems are of great interest to fundamental membrane science and have potential in technological applications, such as drug screening and (bio)sensing.     

支撑液膜研究及应用进展

支撑液膜技术是高选择性膜分离技术,本文对支撑液膜分离技术的研究进展进行了回顾,详述了用于金属离子分离的支撑液膜所采用的载体、影响支撑液膜稳定性的原因以及改善途径,并对支撑液膜的发展前景进行了展望。     

Measuring lipid asymmetry in planar supported bilayers by fluorescence interference contrast microscopy

There is substantial scientific and practical interest in engineering supported lipid bilayers with asymmetric lipid distributions as models for biological cell membranes. In principle, it should be possible to make asymmetric supported lipid bilayers by either the Langmuir-Blodgett/Schafer (LB/LS) or Langmuir-Blodgett/vesicle fusion (LB/VF) techniques (Kalb et al. Biochim. Biophys. Acta 1992, 1103, 307-316). However, the retention of asymmetry in biologically relevant lipid bilayers has never been experimentally examined in any of these systems. In the present work, we developed a technique that is based on fluorescence interference contrast (FLIC) microscopy to measure lipid asymmetry in supported bilayers. We compared the final degree of lipid asymmetry in LB/LS and LB/VF bilayers with and without cholesterol in liquid-ordered (l(o)) and liquid-disordered (l(d)) phases. Of five different fluorescent lipid probes that were examined, 1,2-dipalmitoyl-phosphatidylethanolamine-N-[lissamine rhodamine B] was the best for studying supported bilayers of complex composition and phase by FLIC microscopy. An asymmetrically labeled bilayer made by the LB/LS method was found to be at best 70-80% asymmetric once completed. In LB/LS bilayers of either l(o) or l(d) phase, cholesterol increased the degree of lipid mixing between the opposing monolayers. The use of a tethered polymer support for the initial monolayer did not improve lipid asymmetry in the resulting bilayer. However, asymmetric LB/VF bilayers retained nearly 100% asymmetric label, with or without the use of a tethered polymer support. Finally, lipid mixing across the center of LB/LS bilayers was found to have drastic effects on the appearance of l(d)-l(o) phase coexistence as shown by epifluorescence microscopy.     

Coupling of bending and stretching deformations in vesicle membranes

Biomimetic membranes are fluid and can undergo two different elastic deformations, bending and stretching. The bending of a membrane is primarily governed by two elastic parameters: its spontaneous (or preferred) curvature m and its bending rigidity κ. These two parameters define an intrinsic tension scale, the spontaneous tension 2 κm². Membrane stretching and compression, on the other hand, are determined by the mechanical tension acting within the membrane. For vesicle membranes, the two elastic deformations are coupled via the enclosed vesicle volume even in the absence of mechanical forces as shown here by minimizing the combined bending and stretching energy with respect to membrane area for fixed vesicle volume. As a consequence, the mechanical tension within a vesicle membrane depends on the spontaneous curvature and on the bending rigidity. This interdependence, which is difficult to grasp intuitively, is then illustrated for a variety of simple vesicle shapes. Depending on the vesicle morphology, the magnitude of the mechanical tension can be comparable to or can be much smaller than the spontaneous tension.     

Stabilization of vesicular and supported membranes by glycolipid oxime polymers

We report herein new synthetic glycolipid dimers and polymers that provide unprecedented stability to both supported (SLBs) and vesicular lipid bilayers against dehydration and serum exposure. These novel physical properties will enable pharmaceutical delivery and development of SLB bioanalytical devices.     

Transport of chloride and carboxyfluorescein through phospholipid vesicle membranes by heptapeptide amphiphiles

Seven synthetic anion transporters (SAT) of the general form R(2)N-COCH(2)OCH(2)CO-(Gly)(3)-Pro-(Gly)(3)-OR' were prepared. Three pairs of compounds each contained twin n-hexyl, n-decyl, and n-octadecyl (R) groups at the N-terminus and one contained twin n-tetradecyl groups. Three of the compounds were C-terminated by benzyl and three by heptyl (R') residues. The ability of these compounds to mediate ion release from phospholipid vesicles was assessed. Chloride release was measured by ion selective electrode measurements and by chloride quenching of the fluorescent dye lucigenin. Transport of the anion carboxyfluorescein (CF) was measured by fluorescence dequenching. Differences in both the C- (R') and N-terminal (R) residues within the ionophores affected anion transport. The chloride release data acquired by ion selective electrode and fluorescence methods were similar but not identical. A possible carrier mechanism for Cl(-) transport was discredited. Both Cl(-) and CF anions were released from vesicles by these compounds. The results of CF and Cl(-) transport showed good consistency when the ionophore's N-terminal chains were either decyl or octadecyl but not when they were hexyl. The transport of CF and Cl(-) appears to be fundamentally different when R is C(6) compared to C(10) or C(18). Differences between the behavior of SATs with Cl(-) and CF were also reflected in negative ion mass spectrometric studies.     

Photoinduced increase in vesicle size and role of photoresponsive malachite green leuconitrile derivative in vesicle fusion

The influence of photoirradiation on vesicles containing a Malachite Green leuconitrile derivative carrying a long alkyl chain, affording photogenerated amphiphilicity, was investigated. The photoresponsive Malachite Green leuconitrile derivative was embedded in the vesicle bilayer of two single-tailed amphiphiles with oppositely charged head groups consisting of cetyltrimethylammonium chloride (CTAC) and sodium octyl sulfate (SOS). Transmission electron microscopy, which was used for observing photoinduced structural change in the vesicles, demonstrated that photoirradiation of the vesicles containing the Malachite Green leuconitrile derivative increased the average size of the vesicle diameter from 116 to 243 nm in the [CTAC]/[SOS] = 0.48 system. The mechanism for vesicle enlargement was studied with fluorescent probe molecules. The photoinduced change in the vesicle size can be explained by the destabilization of the vesicle bilayer, which is perturbed by photogenerated amphiphilicity. In addition, it was shown that the fusion process arising from the destabilized bilayer contributed to the increase in vesicle size.     

Wavelength-selective fluorescence in ion channels formed by gramicidin A in membranes

Gramicidins are linear peptides that form ion channels that are specific for monovalent cations in membranes. The tryptophan residues in the gramicidin channel play a crucial role in the organization and function of the channel. The natural mixture of gramicidins, denoted as gramicidin A’, consists of mostly gramicidin A, but also contains gramicidins B, C and D as minor components. We have previously shown that the tryptophan residues in ion channels formed by the naturally occurring peptide, gramicidin A’, display wavelength-dependent fluorescence characteristics due to the motionally restricted environment in which they are localized. In order to check the influence of ground-state heterogeneity in the observed wavelength-selective fluorescence of gramicidin A’ in membranes, we performed similar experiments with pure gramicidin A in model membranes. Our results show that the observed wavelength-selective fluorescence characteristics of naturally occurring gramicidin A’ are not due to ground-state heterogeneity.     

Electrical manipulation of supported lipid membranes by embedded electrodes

Alkanethiol modified gold electrodes patterned over a silica surface provided a dual hydrophobic/hydrophilic surface suitable for phospholipid monolayer and bilayer formation over the alkylated gold and glass surfaces, respectively. The phospholipid monolayer and bilayer were connected, allowing free diffusion of lipids within both leaflets of the glass-supported bilayer over the alkanethiol/gold-to-glass interface. Application of large alternating current fields to these electrodes irreversibly switched the gold electrodes to diffusion barriers. Enclosure of the electrode devices within protein barriers revealed a resting state surface potential driven reorganization of the charged fluorescent probes. Application of lower magnitude direct current fields resulted in electrophoretic redistribution of the membrane probes and electro-osmotic reorganization of membrane associated proteins.     

The mechanism of vesicle fusion as revealed by molecular dynamics simulations

We describe molecular dynamics simulations elucidating the molecular details of the process of fusion for small lipid vesicles. The simulations are based on a coarse grained (CG) lipid model that accurately represents the lamellar state of a variety of phospholipids and enables us to observe intermediate stages during fusion at near atomic detail. Simulations were conducted on a variety of systems containing common phospholipids such as phosphatidylcholine (PC), phosphatidylethanolamine (PE), lysoPC, and mixtures of the above. The fusion intermediates found are in general agreement with the stalk-pore mechanism. Transient pores sometimes form adjacent to the stalk, however, resulting in the mixing of lipids from the outer and inner monolayers. The speed of stalk formation and the opening of the fusion pore can be modulated by altering the lipid composition in qualitative agreement with experimental observations.     

Composition of vanadium carbides formed by solidification in ternary Fe-V-C alloys

The solidification behaviour of Fe-V-C alloys, was studied by differential thermal analysis. The composition and the nature of the phases were analysed by quantitative electron probe microanalysis and X-ray diffraction. Accurate microanalysis of carbon in vanadium carbides (VC_x and V₂C) were performed. A liquidus projection of the system Fe-V-C in the Fe-V rich region was proposed.     

Simulations of lipid vesicle rupture induced by an adjacent supported lipid bilayer patch

Using a simple phenomenological model of a lipid bilayer and a surface, simulations were performed to study the bilayer-induced vesicle rupture probability as a vesicle adsorbs adjacently to a bilayer patch already adsorbed on the surface. The vesicle rupture probability was studied as a function of temperature, vesicle size, and surface-bilayer interaction strength. From the simulation data, estimates of the apparent activation energy for bilayer-induced vesicle rupture were calculated, both for different vesicle sizes and for different surface-bilayer interaction strengths.     

Orientation and conformation of cell-penetrating peptide penetratin in phospholipid vesicle membranes determined by polarized-light spectroscopy

The orientation and conformation of the cell-penetrating peptide "penetratin" associated with phospholipid vesicle membranes has been determined using polarized-light spectroscopy. The magnitude of orientation of penetratin is unprecedented for a solute in our membrane system, which we believe indicates a strong, specific interaction with the membrane. To validate the spectroscopic technique for studying the orientation of the two tryptophan residues of penetratin, we applied tryptophan octyl ester as a model compound. It is found to be incorporated in the membrane and preferentially oriented with its hydrophobic benzene edge of the indole chromophore pointing into the membrane and its hydrophilic groups oriented toward the water. For penetratin, the results indicate that a central alpha-helical part of the peptide is aligned parallel with the membrane surface, while the ends of the peptide adopt a planar structure. The planes of the two tryptophan side chains show a preferred orientation parallel with the membrane surface, indicating that they are not inserted into the membrane.