Preparation and characterization of [Hg[P(C6F5)2]2], [Hg[(mu-P(C6F5)2)W(CO)5]2], and [Hg[(mu-P(CF3)2)W(CO)5]2] and the X-ray crystal structure of [Hg[(mu-P(C6F5)2)W(CO)5]2].2DMF

The thermally unstable compound [Hg[P(C(6)F(5))(2)](2)] was obtained from the reaction of mercury cyanide and bis(pentafluorophenyl)phosphane in DMF solution and characterized by multinuclear NMR spectroscopy. The thermally stable trinuclear compounds [Hg[(mu-P(CF(3))(2))W(CO)(5)](2)] and [Hg[(mu-P(C(6)F(5))(2))W(CO)(5)](2)] are isolated and completely characterized. The higher order NMR spectra exhibiting multinuclear satellite systems have been sufficiently analyzed. [Hg[(mu-P(CF(3))(2))W(CO)(5)](2)].2DMF crystallizes in the monoclinic space group C2/c with a = 2366.2(3) pm, b = 1046.9(1) pm, c = 104.0(1) pm, and beta = 104.01(1) degrees. Structural, NMR spectroscopic, and vibrational data prove a weak coordination of the two DMF molecules. Structural, vibrational, and NMR spectroscopic evidence is given for a successive weakening of the pi back-bonding effect of the W-P bond in the order [W(CO)(5)PH(R(f))(2)], [Hg[(mu-P(R(f))(2))W(CO)(5)](2)], and [W[P(R(f))(2)](CO)(5)](-) with R(f) = C(6)F(5) and CF(3). The pi back-bonding effect of the W-C bonds increases vice versa.     

Preparation and characterization of the argentates: [Ag[P(CF(3))(2)](2)](-), [Ag[(micro-P(CF(3))(2))M(CO)(5)](2)](-) (M = Cr, W), and [Ag[(micro-P(C(6)F(5))(2))W(CO)(5)](2)](-): X-ray crystal structure of [K(18-crown-6)][Ag[(micro-P(CF(3))(2))Cr(CO)(5)](2)

The first example of a mononuclear diphosphanidoargentate, bis[bis(trifluoromethyl)phosphanido]argentate, [Ag[P(CF(3))(2)](2)](-), is obtained via the reaction of HP(CF(3))(2) with [Ag(CN)(2)](-) and isolated as its [K(18-crown-6)] salt. When the cyclic phosphane (PCF(3))(4) is reacted with a slight excess of [K(18-crown-6)][Ag[P(CF(3))(2)](2)], selective insertion of one PCF(3) unit into each silver phosphorus bond is observed, which on the basis of NMR spectroscopic evidence suggests the [Ag[P(CF(3))P(CF(3))(2)](2)](-) ion. On treatment of the phosphane complexes [M(CO)(5)PH(CF(3))(2)] (M = Cr, W) with [K(18-crown-6)][Ag(CN)(2)], the analogous trinuclear argentates, [Ag[(micro-P(CF(3))(2))M(CO)(5)](2)](-), are formed. The chromium compound [K(18-crown-6)][Ag[(micro-P(CF(3))(2))Cr(CO)(5)](2)] crystallizes in a noncentrosymmetric space group Fdd2 (No. 43), a = 2970.2(6) pm, b = 1584.5(3) pm, c = 1787.0(4), V = 8.410(3) nm(3), Z = 8. The C(2) symmetric anion, [Ag[(micro-P(CF(3))(2))Cr(CO)(5)](2)](-), shows a nearly linear arrangement of the P-Ag-P unit. Although the bis(pentafluorophenyl)phosphanido compound [Ag[P(C(6)F(5))(2)](2)](-) has not been obtained so far, the synthesis of its trinuclear counterpart, [K(18-crown-6)][Ag[(micro-P(C(6)F(5))(2))W(CO)(5)](2)], was successful.     

Reactivity of the bis(pentafluorophenyl)boranes ClB(C6F5)2 and [HB(C6F5)2]n towards late transition metal reagents

The reactivities of the highly electrophilic boranes ClB(C(6)F(5))(2) (1) and [HB(C(6)F(5))(2)](n) (2) towards a range of organometallic reagents featuring metals from Groups 7-10 have been investigated. Salt elimination chemistry is observed 1 between and the nucleophilic anions eta(5)-C(5)R(5))Fe(CO)(2)](-)(R = H or Me) and [Mn(CO)(5)](-), leading to the generation of the novel boryl complexes (eta(5)-C(5)R(5))Fe(CO)(2)B(C(6)F(5))(2)[R = H (3) or Me (4)] and (OC)(5)MnB(C(6)F(5))(2) (5). Such systems are designed to probe the extent to which the strongly sigma-donor boryl ligand can also act as a pi-acceptor; a variety of spectroscopic, structural and computational probes imply that even with such strongly electron withdrawing boryl substituents, the pi component of the metal-boron linkage is a relatively minor one. Similar reactivity is observed towards the hydridomanganese anion [(eta(5)-C(5)H(4)Me)Mn(CO)(2)H](-), generating a thermally labile product identified spectroscopically as (eta(5)-C(5)H(4)Me)Mn(CO)(2)(H)B(C(6)F(5))(2) (6). Boranes 1 and 2 display different patterns of reactivity towards low-valent platinum and rhodium complexes than those demonstrated previously for less electrophilic reagents. Thus, reaction of 1 with (Ph(3)P)(2)Pt(H(2)C=CH(2)) ultimately generates EtB(C(6)F(5))(2) (10) as the major boron-containing product, together with cis-(Ph(3)P)(2)PtCl(2) and trans-(Ph(3)P)(2)Pt(C(6)F(5))Cl (9). The cationic platinum hydride [(Ph(3)P)(3)PtH](+) is identified as an intermediate in the reaction pathway. Reaction of with [(Ph(3)P)(2)Rh(mu-Cl)](2), in toluene on the other hand, appears to proceed via ligand abstraction with both Ph(3)P.HB(C(6)F(5))(2) (11) and the arene rhodium(I) cation [(Ph(3)P)(2)Rh(eta(6)-C(6)H(5)Me)](+) (14) ultimately being formed.     

Synthetic and structural investigations of linear and macrocyclic nickel/iron/sulfur cluster complexes

Three series of new Ni/Fe/S cluster complexes have been prepared and structurally characterized. One series of such complexes includes the linear type of (diphosphine)Ni-bridged double-butterfly Fe/S complexes [(μ-RS)(μ-S═CS)Fe(2)(CO)(6)](2)[Ni(diphosphine)] (1-6; R = Et, t-Bu, n-Bu, Ph; diphosphine = dppv, dppe, dppb), which were prepared by reactions of monoanions [(μ-RS)(μ-CO)Fe(2)(CO)(6)](-) (generated in situ from Fe(3)(CO)(12), Et(3)N, and RSH) with excess CS(2), followed by treatment of the resulting monoanions [(μ-RS)(μ-S═CS)Fe(2)(CO)(6)](-)with (diphosphine)NiCl(2). The second series consists of the macrocyclic type of (diphosphine)Ni-bridged double-butterfly Fe/S complexes [μ-S(CH(2))(4)S-μ][(μ-S═CS)Fe(2)(CO)(6)](2)[Ni(diphosphine)] (7-9; diphosphine = dppv, dppe, dppb), which were produced by the reaction of dianion [{μ-S(CH(2))(4)S-μ}{(μ-CO)Fe(2)(CO)(6)}(2)](2-) (formed in situ from Fe(3)(CO)(12), Et(3)N, and dithiol HS(CH(2))(4)SH with excess CS(2), followed by treatment of the resulting dianion [{μ-S(CH(2))(4)S-μ}{(μ-S═CS)Fe(2)(CO)(6)}(2)](2-) with (diphosphine)NiCl(2). However, more interestingly, when dithiol HS(CH(2))(4)SH (used for the production of 7-9) was replaced by HS(CH(2))(3)SH (a dithiol with a shorter carbon chain), the sequential reactions afforded another type of macrocyclic Ni/Fe/S complex, namely, the (diphosphine)Ni-bridged quadruple-butterfly Fe/S complexes [{μ-S(CH(2))(3)S-μ}{(μ-S═CS)Fe(2)(CO)(6)}(2)](2)[Ni(diphosphine)](2) (10-12; diphosphine = dppv, dppe, dppb). While a possible pathway for the production of the two types of novel metallomacrocycles 7-12 is suggested, all of the new complexes 1-12 were characterized by elemental analysis and spectroscopy and some of them by X-ray crystallography.     

Theoretical proton affinity and fluoride affinity of nerve agent VX

Proton affinity and fluoride affinity of nerve agent VX at all of its possible sites were calculated at the RI-MP2/cc-pVTZ//B3LYP/6-31G* and RI-MP2/aug-cc-pVTZ//B3LYP/6-31+G* levels, respectively. The protonation leads to various unique structures, with H(+) attached to oxygen, nitrogen, and sulfur atoms; among which the nitrogen site possesses the highest proton affinity of -ΔE ～ 251 kcal/mol, suggesting that this is likely to be the major product. In addition some H(2), CH(4) dissociation as well as destruction channels have been found, among which the CH(4) + [Et-O-P(═O)(Me)-S-(CH(2))(2)-N(+)(iPr)═CHMe] product and the destruction product forming Et-O-P(═O)(Me)-SMe + CH(2)═N(+)(iPr)(2) are only 9 kcal/mol less stable than the most stable N-protonated product. For fluoridization, the S-P destruction channel to give Et-O-P(═O)(Me)(F) + [S-(CH(2))(2)-N-(iPr)(2)](-) is energetically the most favorable, with a fluoride affinity of -ΔE ～ 44 kcal. Various F(-) ion-molecule complexes are also found, with the one having F(-) interacting with two hydrogen atoms in different alkyl groups to be only 9 kcal/mol higher than the above destruction product. These results suggest VX behaves quite differently from surrogate systems.     

Univalent gallium and indium phosphane complexes: from pyramidal M(PPh3)3(+) to carbene-analogous bent M(PtBu3)2(+) (M=Ga, In) complexes

In a new oxidative route, Ag(+)[Al(OR(F))(4)](-) (R(F)=C(CF(3))(3)) and metallic indium were sonicated in aromatic solvents, such as fluorobenzene (PhF), to give a precipitate of silver metal and highly soluble [In(PhF)(n)](+) salts (n=2, 3) with the weakly coordinating [Al(OR(F))(4)](-) anion in quantitative yield. The In(+) salt and the known analogous Ga(+)[Al(OR(F))(4)](-) were used to synthesize a series of homoleptic PR(3) phosphane complexes [M(PR(3))(n)](+), that is, the weakly PPh(3)-bridged [(Ph(3)P)(3)In-(PPh(3))-In(PPh(3))(3)](2+) that essentially contains two independent [In(PPh(3))(3)](+) cations or, with increasing bulk of the phosphane, the carbene-analogous [M(PtBu(3))(2)](+) (M=Ga, In) cations. The M(I)-P distances are 27 to 29 pm longer for indium, and thus considerably longer than the difference between their tabulated radii (18 pm). The structure, formation, and frontier orbitals of these complexes were investigated by calculations at the BP86/SV(P), B3LYP/def2-TZVPP, MP2/def2-TZVPP, and SCS-MP2/def2-TZVPP levels.     

Condensation reactions of monomeric hydroxo palladium complexes with active methyl and methylene compounds

Heating a suspension of the monomeric hydroxo palladium complex of the type [Pd(N-N)(C(6)F(5))(OH)](N-N = bipy, Me(2)bipy, phen or tmeda) in methylketone (acetone or methylisobutylketone) under reflux affords the corresponding ketonyl palladium complex [Pd(N-N)(C(6)F(5))(CH(2)COR)]. On the other hand, the reaction of the hydroxo palladium complexes [Pd(N-N)(C(6)F(5))(OH)](N-N = bipy, phen or tmeda) with diethylmalonate or malononitrile yields the C-bound enolate palladium complexes [Pd(N-N)(CHX(2))(C(6)F(5))](X = CO(2)Et or CN), and the reaction of [Pd(N-N)(C(6)F(5))(OH)](N-N = bipy or phen) with nitromethane gives the nitromethyl palladium complexes [Pd(N-N)(CH(2)NO(2))(C(6)F(5))]. [Pd(tmeda)(C(6)F(5))(OH)] catalyses the cyclotrimerization of malononitrile. The crystal structures of [Pd(bipy)(C(6)F(5))(CH(2)COMe)].1/2Me(2)CO, [Pd(tmeda)(C(6)F(5))[CH(CO(2)Et)(2)]], [Pd(tmeda)(C(6)F(5))[CH(CN)(2)]] and [Pd(tmeda)(C(6)F(5))(CH(2)NO(2))].1/2CH(2)Cl(2) have been established by X-ray diffraction.     

From tetrahydroborate- to aminoborylvinylidene-osmium complexes via alkynyl-aminoboryl intermediates

The tetrahydroborate OsH(η(2)-H(2)BH(2))(CO)(P(i)Pr(3))(2) (1) reacts with aniline and p-toluidine to give the aminoboryl derivatives [chemical structure: see text] (R = H (2), CH(3) (3)) and four H(2) molecules. Treatment of 2 and 3 with phenylacetylene gives Os{B(NHC(6)H(4)R)(2)}(C≡CPh)(CO)(P(i)Pr(3))(2) (R = H (4), CH(3) (5)), which react with HBF(4) to afford the amino(fluoro)boryl species Os{BF(NHC(6)H(4)R)}(C≡CPh)(CO)(P(i)Pr(3))(2) (R = H (6), CH(3) (7)). In contrast to HBF(4), the addition of acetic acid to 4 and 5 induces the release of phenylacetylene and the formation of the six-coordinate derivatives Os{B(NHC(6)H(4)R)(2)}(κ(2)-O(2)CCH(3))(CO)(P(i)Pr(3))(2) (R = H (8), CH(3) (9)). The coordination number six for 4 and 5 can be also achieved by addition of CO. Under this gas Os{B(NHC(6)H(4)R)(2)}(C≡CPh)(CO)(2)(P(i)Pr(3))(2) (R = H (10), CH(3) (11)) are formed. In toluene, these alkynyl-aminoboryl compounds evolve into the aminoborylvinylidenes Os{═C═C(Ph)B(NHC(6)H(4)R)(2)}(CO)(2)(P(i)Pr(3))(2) (R = H (12), CH(3) (13)) via a unimolecular 1,3-boryl migration from the metal to the C(β) atom of the alkynyl ligand. Similarly to 4 and 5, complexes 6 and 7 coordinate CO to give Os{BF(NHC(6)H(4)R)}(C≡CPh)(CO)(2)(P(i)Pr(3))(2) (R = H (15), CH(3) (16)), which evolve to Os{═C═C(Ph)BF(NHC(6)H(4)R)}(CO)(2)(P(i)Pr(3))(2) (R = H (17), CH(3) (18)).     

Synthesis with structural and electronic characterization of homoleptic Fe(II)- and Fe(III)-fluorinated phenolate complexes

Four Fe(III) compounds and one Fe(II) compound containing mononuclear, homoleptic, fluorinated phenolate anions of the form [Fe(OAr)(m)](n-) have been prepared in which Ar(F) = C(6)F(5) and Ar' = 3,5-C(6)(CF(3))(2)H(3): (Ph(4)P)(2)[Fe(OAr(F))(5)], 1, (Me(4)N)(2)[Fe(OAr(F))(5)], 2, {K(18-crown-6)}(2)[Fe(OAr(F))(5)], 3a, {K(18-crown-6)}(2)[Fe(OAr')(5)], 3b, and {K(18-crown-6)}(2)[Fe(OAr(F))(4)], 6. Two dinuclear Fe(III) compounds have also been prepared: {K(18-crown-6)}(2)[(OAr(F))(3)Fe(μ(2)-O)Fe(OAr(F))(3)], 4, and {K(18-crown-6)}(2)[(OAr(F))(3)Fe(μ(2)-OAr(F))(2)Fe(OAr(F))(3)], 5. These compounds have been characterized with UV-vis spectroscopy, elemental analysis, Evans method susceptibility, and X-ray crystallography. All-electron, geometry-optimized DFT calculations on four [Ti(IV)(OAr)(4)] and four [Fe(III)(OAr)(4)](-) species (Ar = 2,3,5,6-C(6)Me(4)H, C(6)H(5), 2,4,6-C(6)Cl(3)H(2), C(6)F(5)) with GGA-BP and hybrid B3LYP basis sets demonstrated that, under D(2d) symmetry, π donation from the O 2p orbitals is primarily into the d(xy) and d(z(2)) orbitals. The degree of donation is qualitatively consistent with expectations based on ligand Br?nsted basicity and supports the contention that fluorinated phenolate ligands facilitate isolation of nonbridged homoleptic complexes due to their reduced π basicity at oxygen.     

Rhodium(I) and Rhodium(III) complexes containing the chiral ligand 2,6-bis[4'(S)-isopropyloxazolin-2'-yl]pyridine (pybox): an unprecedented monohapto coordination of pybox

The complex [Rh(kappa(3)-N,N,N-pybox)(CO)][PF(6)] (1) has been prepared by reaction of the precursor [Rh(mu-Cl)(eta(2)-C(2)H(4))(2)](2), 2,6-bis[4'(S)-isopropyloxazolin-2'-yl]pyridine (pybox), CO, and NaPF(6). Complex 1 reacts with monodentate phosphines to give the complexes [Rh(kappa(1)-N-pybox)(CO)(PR(3))(2)][PF(6)] (R(3) = MePh(2) (2), Me(2)Ph (3), (C(3)H(5))Ph(2) (4)), which show a previously unseen monodentate coordination of pybox. Complex 1 undergoes oxidative addition reactions with iodine and CH(3)I leading to the complexes [RhI(R)(kappa(3)-N,N,N-pybox)(CO)][PF(6)] (R = I (5); R = CH(3) (6)). Furthermore, a new allenyl Rh(III)-pybox complex of formula [Rh(CH=C=CH(2))Cl(2)(kappa(3)-N,N,N-pybox)] (7) has been synthesized by a one-pot reaction from [Rh(mu-Cl)(eta(2)-C(2)H(4))(2)](2), pybox, and an equimolar amount of propargyl chloride.     

Silylenediamido [(CH3)2Si(NTs)2(2-); Ts = p-CH3C6H4SO2] complexes of iridium: synthesis, structures and facile Si-N bond cleavage

The N,N'-bis(sulfonyl)diaminosilane TsdmsinH(2) (TsdmsinH(2) = (CH(3))(2)Si(NHTs)(2), Ts = p-CH(3)C(6)H(4)SO(2)) reacted with [Cp*IrCl(2)](2) (Cp* = eta(5)-C(5)(CH(3))(5)) in the presence of a base to give the coordinatively unsaturated (silylenediamido)iridium complex [Cp*Ir(Tsdmsin)] (2), which was further converted to the 18e adducts [Cp*Ir(Tsdmsin)L] (L = P(C(6)H(5))(3) (3a), P(OC(2)H(5))(3), CO); the reactions of 2 and 3a with water led to the formation of the imido-bridged dinuclear complex [Cp*Ir(micro(2)-NTs)(2)IrCp*] and the bis(amido) complex [Cp*Ir(NHTs)(2){P(C(6)H(5))(3)}], respectively.     

Activation of H-H and H-O bonds at phosphorus with diiron complexes bearing pyramidal phosphinidene ligands

The complex [Fe(2)Cp(2)(μ-PMes*)(μ-CO)(CO)(2)] (Mes* = 2,4,6-C(6)H(2)(t)Bu(3)), which in the solid state displays a pyramidal phosphinidene bridge, reacted at room temperature with H(2) (ca. 4 atm) to give the known phosphine complex [Fe(2)Cp(2)(μ-CO)(2)(CO)(PH(2)Mes*)] as the major product, along with small amounts of other byproducts arising from the thermal degradation of the starting material, such as the phosphindole complex [Fe(2)Cp(2)(μ-CO)(2)(CO){PH(CH(2)CMe(2))C(6)H(2)(t)Bu(2)}], the dimer [Fe(2)Cp(2)(CO)(4)], and free phosphine PH(2)Mes*. During the course of the reaction, trace amounts of the mononuclear phosphide complex [FeCp(CO)(2)(PHMes*)] were also detected, a compound later found to be the major product in the carbonylation of the parent phosphinidene complex, with this reaction also yielding the dimer [Fe(2)Cp(2)(CO)(4)] and the known diphosphene Mes*P═PMes*. The outcome of the carbonylation reactions of the title complex could be rationalized by assuming the formation of an unstable tetracarbonyl intermediate [Fe(2)Cp(2)(μ-PMes*)(CO)(4)] (undetected) that would undergo a fast homolytic cleavage of a Fe-P bond, this being followed by subsequent evolution of the radical species so generated through either dimerization or reaction with trace amounts of water present in the reaction media. A more rational synthetic procedure for the phosphide complex was accomplished through deprotonation of the phosphine compound [FeCp(CO)(2)(PH(2)Mes*)](BF(4)) with Na(OH), the latter in turn being prepared via oxidation of [Fe(2)Cp(2)(CO)(4)] with [FeCp(2)](BF(4)) in the presence of PH(2)Mes*. To account for the hydrogenation of the parent phosphinidene complex it was assumed that, in solution, small amounts of an isomer displaying a terminal phosphinidene ligand would coexist with the more stable bridged form, a proposal supported by density functional theory (DFT) calculations of both isomers, with the latter also revealing that the frontier orbitals of the terminal isomer (only 5.7 kJ mol(-1) above of the bridged isomer, in toluene solution) have the right shapes to interact with the H(2) molecule. In contrast to the above behavior, the cyclohexylphosphinidene complex [Fe(2)Cp(2)(μ-PCy)(μ-CO)(CO)(2)] failed to react with H(2) under conditions comparable to those of its PMes* analogue. Instead, it slowly reacted with HOR (R = H, Et) to give the corresponding phosphinous acid (or ethyl phosphinite) complexes [Fe(2)Cp(2)(μ-CO)(2)(CO){PH(OR)Mes*}], a behavior not observed for the PMes* complex. The presence of BEt(3) increased significantly the rate of the above reaction, thus pointing to a pathway initiated with deprotonation of an O-H bond of the reagent by the basic P center of the phosphinidene complex, this being followed by the nucleophilic attack of the OR(-) anion at the P site of the transient cationic phosphide thus formed. The solid-state structure of the cis isomer of the ethanol derivative was determined through a single crystal X-ray diffraction study (Fe-Fe = 2.5112(8) ?, Fe-P = 2.149(1) ?).     

Synthesis, structure and reactivity of novel pyridazine-coordinated diiron bridging carbene complexes

[{mu-(Pyridazine-N(1):N(2))}Fe(2)(mu-CO)(CO)(6)](1) reacts with aryllithium reagents, ArLi (Ar = C(6)H(5), m-CH(3)C(6)H(4)) followed by treatment with Me(3)SiCl to give the novel pyridazine-coordinated diiron bridging siloxycarbene complexes [(C(4)H(4)N(2))Fe(2){mu-C(OSiMe(3))Ar}(CO)(6)](2, Ar = C(6)H(5); 3, Ar =m-CH(3)C(6)H(4)). Complex 2 reacts with HBF(4).Et(2)O at low temperature to yield a cationic bridging carbyne complex [(C(4)H(4)N(2))Fe(2)(mu-CC(6)H(5))(CO)(6)]BF(4)(4). Cationic 4 reacts with NaBH(4) in THF at low temperature to afford the diiron bridging arylcarbene complex [(C(4)H(4)N(2))Fe(2){mu-C(H)C(6)H(5)}(CO)(6)](5). Unexpectedly, the reaction of 4 with NaSCH(3) under similar conditions gave the bridging arylcarbene complex 5 and a carbonyl-coordinated diiron bridging carbene complex [Fe(2){mu-C(SCH(3))C(6)H(5)}(CO)(7)](6), while the reaction of NaSC(6)H(4)CH(3)-p with 4 affords the expected bridging arylthiocarbene complex [(C(4)H(4)N(2))Fe(2){mu-C(SC(6)H(4)CH(3)-p)C(6)H(5)}(CO)(6)](7), which can be converted into a novel diiron bridging carbyne complex with a thiolato-bridged ligand, [Fe(2)(mu-CC(6)H(5))(mu-SC(6)H(4)CH(3)-p)(CO)(6)](8). Cationic can also react with the carbonylmetal anionic compound Na(2)[Fe(CO)(4)] to yield complex 5, while the reactions of 4 with carbonylmetal anionic compounds Na[M(CO)(5)(CN)](M = Cr, Mo, W) produce the diiron bridging aryl(pentacarbonylcyanometal)carbene complexes [(C(4)H(4)N(2))Fe(2)-{mu-C(C(6)H(5))NCM(CO)(5)}(CO)(6)](9, M = Cr; 10, M = Mo; 11, M = W). The structures of complexes 2, 5, 6, 8, and 9 have been established by X-ray diffraction studies.     

Oxidation and reduction of bis(imino)pyridine iron dicarbonyl complexes

The oxidation and reduction of a redox-active aryl-substituted bis(imino)pyridine iron dicarbonyl has been explored to determine whether electron-transfer events are ligand- or metal-based or a combination of both. A series of bis(imino)pyridine iron dicarbonyl compounds, [((iPr)PDI)Fe(CO)(2)](-), ((iPr)PDI)Fe(CO)(2), and [((iPr)PDI)Fe(CO)(2)](+) [(iPr)PDI = 2,6-(2,6-(i)Pr(2)C(6)H(3)N═CMe)(2)C(5)H(3)N], which differ by three oxidation states, were prepared and the electronic structures evaluated using a combination of spectroscopic techniques and, in two cases, [((iPr)PDI)Fe(CO)(2)](+) and [((iPr)PDI)Fe(CO)(2)], metrical parameters from X-ray diffraction. The data establish that the cationic iron dicarbonyl complex is best described as a low-spin iron(I) compound (S(Fe) = ?) with a neutral bis(imino)pyridine chelate. The anionic iron dicarbonyl, [((iPr)PDI)Fe(CO)(2)](-), is also best described as an iron(I) compound but with a two-electron-reduced bis(imino)pyridine. The covalency of the neutral compound, ((iPr)PDI)Fe(CO)(2), suggests that both the oxidative and reductive events are not ligand- or metal-localized but a result of the cooperativity of both entities.     

Synthesis, structures, and reactivity of weakly coordinating anions with delocalized borate structure: the assessment of anion effects in metallocene polymerization catalysts.

The formation of adducts of tris(pentafluorophenyl)borane with strongly coordinating anions such as CN(-) and [M(CN)(4)](2)(-) (M = Ni, Pd) is a synthetically facile route to the bulky, very weakly coordinating anions [CN[B(C(6)F(5))(3)](2)](-) and [M[CNB(C(6)F(5))(3)](4)](2-) which are isolated as stable NHMe(2)Ph(+) and CPh(3)(+) salts. The crystal structures of [CPh(3)][CN[B(C(6)F(5))(3)](2)] (1), [CPh(3)][ClB(C(6)F(5))(3)] (2), [NHMe(2)Ph](2)[Ni[CNB(C(6)F(5))(3)](4)].2Me(2)CO (4b.2Me(2)CO), [CPh(3)](2)[Ni[CNB(C(6)F(5))(3)](4)].2CH(2)Cl(2) (4c.2CH(2)Cl(2)), and [CPh(3)](2)[Pd[CNB(C(6)F(5))(3)](4)].2CH(2)Cl(2) (5c.2CH(2)Cl(2)) are reported. The CN stretching frequencies in 4 and 5 are shifted by approximately 110 cm(-1) to higher wavenumbers compared to the parent tetracyano complexes in aqueous solution, although the M-C and C-N distances show no significant change on B(C(6)F(5))(3) coordination. Zirconocene dimethyl complexes L(2)ZrMe(2) [L(2) = Cp(2), SBI = rac-Me(2)Si(Ind)(2)] react with 1, 4c or 5c in benzene solution at 20 degrees C to give the salts of binuclear methyl-bridged cations, [(L(2)ZrMe)(2)(mu-Me)][CN[B(C(6)F(5))(3)](2)] and [(L(2)ZrMe)(2)(mu-Me)](2)[M[CNB(C(6)F(5))(3)](4)]. The reactivity of these species in solution was studied in comparison with the known [[(SBI)ZrMe](2)(mu-Me)][B(C(6)F(5))(4)]. While the latter reacts with excess [CPh(3)][B(C(6)F(5))(4)] in benzene to give the mononuclear ion pair [(SBI)ZrMe(+).B(C(6)F(5))(4)(-)] in a pseudo-first-order reaction, k = 3 x 10(-4) s(-1), [(L(2)ZrMe)(2)(mu-Me)][CN[B(C(6)F(5))(3)](2)] reacts to give a mixture of L(2)ZrMe(mu-Me)B(C(6)F(5))(3) and L(2)ZrMe(mu-NC)B(C(6)F(5))(3). Recrystallization of [Cp' '(2)Zr(mu-Me)(2)AlMe(2)][CN[B(C(6)F(5))(3)](2)] affords Cp' '(2)ZrMe(mu-NC)B(C(6)F(5))(3) 6, the X-ray structure of which is reported. The stability of [(L(2)ZrMe)(2)(mu-Me)](+)X(-) decreases in the order X = [B(C(6)F(5))(4)] > [M[CNB(C(6)F(5))(3)](4)] > [CN[B(C(6)F(5))(3)](2)] and increases strongly with the steric bulk of L(2) = Cp(2) < SBI. Activation of (SBI)ZrMe(2) by 1 in the presence of AlBu(i)(3) gives extremely active ethene polymerization catalysts. Polymerization studies at 1-7 bar monomer pressure suggest that these, and by implication most other highly active ethene polymerization catalysts, are strongly mass-transport limited. By contrast, monitoring propene polymerization activities with the systems (SBI)ZrMe(2)/1/AlBu(i)(3) and CGCTiMe(2)/1/AlBu(i)(3) at 20 degrees C as a function of catalyst concentration demonstrates that in these cases mass-transport limitation is absent up to [metal] approximately 2 x 10(-5) mol L(-1). Propene polymerization activities decrease in the order [CN[B(C(6)F(5))(3)](2)](-) > [B(C(6)F(5))(4)](-) > [M[CNB(C(6)F(5))(3)](4)](2-) > [MeB(C(6)F(5))(3)](-), with differences in activation barriers relative to [CN[B(C(6)F(5))(3)](2)](-) of DeltaDeltaG = 1.1 (B(C(6)F(5))(4)(-)), 4.1 (Ni[CNB(C(6)F(5))(3)](4)(2-)) and 10.7-12.8 kJ mol(-)(1) (MeB(C(6)F(5))(3)(-)). The data suggest that even in the case of very bulky anions with delocalized negative charge the displacement of the anion by the monomer must be involved in the rate-limiting step.     

Synthesis and characterization of reduced heme and heme/copper carbonmonoxy species

Carbon monoxide readily binds to heme and copper proteins, acting as a competitive inhibitor of dioxygen. As such, CO serves as a probe of protein metal active sites. In our ongoing efforts to mimic the active site of cytochrome c oxidase, reactivity toward carbon monoxide offers a unique opportunity to gain insight into the binding and spectroscopic characteristics of synthetic model compounds. In this paper, we report the synthesis and characterization of CO-adducts of ((5/6)L)Fe(II), [((5/6)L)Fe(II)...Cu(I)](B(C(6)F(5))(4)), and [(TMPA)Cu(I)(CH(3)CN)](B(C(6)F(5))(4)), where TMPA = tris(2-pyridylmethyl)amine and (5/6)L = a tetraarylporphyrinate tethered in either the 5-position ((5)L) or 6-position ((6)L) to a TMPA copper binding moiety. Reaction of ((5/6)L)Fe(II) [in THF (293 K): UV-vis 424 (Soret), 543-544 nm; (1)H NMR delta(pyrrole) 52-59 ppm (4 peaks); (2)H NMR (from ((5)L-d(8))Fe(II)) delta(pyrrole) 53.3, 54.5, 55.8, 56.4 ppm] with CO in solution at RT yielded ((5/6)L)Fe(II)-CO [in THF (293 K): UV-vis 413-414 (Soret), 532-533 nm; IR nu(CO)(Fe) 1976-1978 cm(-1); (1)H NMR delta(pyrrole) 8.8 ppm; (2)H NMR (from ((5)L-d(8))Fe(II)-CO) delta(pyrrole) 8.9 ppm; (13)C NMR delta((CO)Fe) 206.8-207.1 ppm (2 peaks)]. Experiments repeated in acetonitrile, acetone, toluene, and dichloromethane showed similar spectroscopic data. Binding of CO resulted in a change from five-coordinate, high-spin Fe(II) to six-coordinate, low-spin Fe(II), as evidenced by the upfield shift of the pyrrole resonances to the diamagnetic region ((1)H and (2)H NMR spectra). Addition of CO to [((5/6)L)Fe(II)...Cu(I)](B(C(6)F(5))(4)) [in THF (293 K): UV-vis ((6)L only) 424 (Soret), 546 nm; (1)H NMR delta(pyrrole) 54-59 ppm (multiple peaks); (2)H NMR (from [((5)L-d(8))Fe(II).Cu(I)](B(C(6)F(5))(4))) delta(pyrrole) 53.4 ppm (br)] gave the bis-carbonyl adduct [((5/6)L)Fe(II)-CO...Cu(I)-CO](B(C(6)F(5))(4)) [in THF (293 K): UV-vis ((6)L only) 413 (Soret), 532 nm; IR nu(CO)(Fe) 1971-1973 cm(-1), nu(CO)(Cu) 2091-2093 cm(-1), approximately 2070(sh) cm(-1); (1)H NMR delta(pyrrole) 8.7-8.9 ppm; (2)H NMR (from [((5)L-d(8))Fe(II)-CO...Cu(I)-CO](B(C(6)F(5))(4))) delta(pyrrole) 8.9 ppm; (13)C NMR delta((CO)Fe) 206.8-208.1 ppm (2 peaks), delta((CO)Cu) 172.4 ((5)L), 178.2 ((6)L) ppm]. Experiments in acetonitrile, acetone, and toluene exhibited spectral features similar to those reported. The [((5/6)L)Fe(II)-CO.Cu(I)-CO](B(C(6)F(5))(4)) compounds yielded (CO)(Fe) spectra analogous to those seen for ((5/6)L)Fe(II)-CO and (CO)(Cu) spectra similar to those seen for [(TMPA)Cu(I)-CO](B(C(6)F(5))(4)) [in THF (293 K): IR nu(CO)(Cu) 2091 cm(-1), approximately 2070(sh) cm(-1); (13)C NMR delta((CO)Cu) 180.3 ppm]. Additional IR studies were performed in which the [((5)L)Fe(II)-CO...Cu(I)-CO](B(C(6)F(5))(4)) in solution was bubbled with argon in an attempt to generate the iron-only mono-carbonyl [((5)L)Fe(II)-CO.Cu(I)](B(C(6)F(5))(4)) species; in coordinating solvent or with axial base present, decreases in characteristic IR-band intensities revealed complete loss of CO from copper and variable loss of CO from the heme.     

Ni, Pd, Pt, and Ru complexes of phosphine-borate ligands

The species Cy(2)PHC(6)F(4)BF(C(6)F(5))(2) reacts with Pt(PPh(3))(4) to yield the new product cis-(PPh(3))(2)PtH(Cy(2)PC(6)F(4)BF(C(6)F(5))(2)) 1 via oxidative addition of the P-H bond of the phosphonium borate to Pt(0). The corresponding reaction with Pd(PPh(3))(4) affords the Pd analogue of 1, namely, cis-(PPh(3))(2)PdH(Cy(2)PC(6)F(4)BF(C(6)F(5))(2)) 3; while modification of the phosphonium borate gave the salt [(PPh(3))(3)PtH][(tBu(2)PC(6)F(4)BF(C(6)F(5))(2))] 2. Alternatively initial deprotonation of the phosphonium borate gave [tBu(3)PH][Cy(2)PC(6)F(4)BF(C(6)F(5))(2)] 4, [SIMesH][Cy(2)PC(6)F(4)BF(C(6)F(5))(2)] 5 which reacted with NiCl(2)(DME) yielding [BaseH](2)[trans-Cl(2)Ni(Cy(2)PC(6)F(4)BF(C(6)F(5))(2))(2)] (Base = tBu(3)P 6, SIMes 7) or with PdCl(2)(PhCN)(2) to give [BaseH](2)[trans-Cl(2)Pd(Cy(2)PC(6)F(4)BF(C(6)F(5))(2))(2)] (Base = tBu(3)P 8, SIMes 9). While [C(10)H(6)N(2)(Me)(4)H][tBu(2)PC(6)F(4)BF(C(6)F(5))(2)] 10 was also prepared. A third strategy for formation of a metal complex of anionic phosphine-borate derivatives was demonstrated in the reaction of (COD)PtMe(2) with the neutral phosphine-borane Mes(2)PC(6)F(4)B(C(6)F(5))(2) affording (COD)PtMe(Mes(2)PC(6)F(4)BMe(C(6)F(5))(2)) 11. Extension of this reactivity to tBu(2)PH(CH(2))(4)OB(C(6)F(5))(3)) was demonstrated in the reaction with Pt(PPh(3))(4) which yielded cis-(PPh(3))(2)PtH(tBu(2)P(CH(2))(4)OB(C(6)F(5))(3)) 12, while the reaction of [SIMesH][tBu(2)P(CH(2))(4)OB(C(6)F(5))(3)] 13 with NiCl(2)(DME) and PdCl(2)(PhCN)(2) afforded the complexes [SIMesH](2)[trans-Cl(2)Ni(tBu(2)PC(4)H(8)OB(C(6)F(5))(3))(2)] 14 and [SIMesH](2)[trans-PdCl(2)(tBu(2)P(CH(2))(4)OB(C(6)F(5))(3))(2)] 15, respectively, analogous to those prepared with 4 and 5. Finally, the reaction of 7 and 13with [(p-cymene)RuCl(2)](2) proceeds to give the new orange products [SIMesH][(p-cymene)RuCl(2)(Cy(2)PC(6)F(4)BF(C(6)F(5))(2))] 16 and [SIMesH][(p-cymene)RuCl(2)(tBu(2)P(CH(2))(4)OB(C(6)F(5))(3))] 17, respectively. Crystal structures of 1, 6, 10, 11, 12, and 16 are reported.     

Synthesis and characterization of a new family of square-planar nickel(II) carbonyl derivatives

The reaction of [NBu(4)](2)[Ni(C(6)F(5))(4)] (1) with solutions of dry HCl(g) in Et(2)O results in the protonolysis of two Nibond;C(6)F(5) bonds giving [NBu(4)](2)[[Ni(C(6)F(5))(2)](2)(mu-Cl)(2)] (2 a) together with the stoichiometrically required amount of C(6)F(5)H. Compound 2 a reacts with AgClO(4) in THF to give cis-[Ni(C(6)F(5))(2)(thf)(2)] (3). Reacting 3 with phosphonium halides, [PPh(3)Me]X, gives dinuclear compounds [PPh(3)Me](2)[[Ni(C(6)F(5))(2)](2)(mu-X)(2)] (X=Br (2 b) or I (2 c)). Solutions of compounds 2 in CH(2)Cl(2) at 0 degrees C do not react with excess CNtBu, but do react with CO (1 atm) to split the bridges and form a series of terminal Ni(II) carbonyl derivatives with general formula Qcis-[Ni(C(6)F(5))(2)X(CO)] (4). The nu(CO) stretching frequencies of 4 in CH(2)Cl(2) solution decrease in the order Cl (2090 cm(-1))>Br (2084 cm(-1))>I (2073 cm(-1)). Compounds 4 revert to the parent dinuclear species 2 on increasing the temperature or under reduced CO pressure. [NBu(4)]cis-[Ni(C(6)F(5))(2)Cl(CO)] (4 a) reacts with AgC(6)F(5) to give [NBu(4)][Ni(C(6)F(5))(3)(CO)] (5, nu(CO)(CH(2)Cl(2))=2070 cm(-1)). Compound 5 is also quantitatively formed ((19)F NMR spectroscopy) by 1:1 reaction of 1 with HCl(Et(2)O) in CO atmosphere. Complex 3 reacts with CO at -78 degrees C to give cis-[Ni(C(6)F(5))(2)(CO)(2)] (6, nu(CO)(CH(2)Cl(2))=2156, 2130 cm(-1)), which easily decomposes by reductive elimination of C(6)F(5)bond;C(6)F(5). Compounds 3 and 6 both react with CNtBu to give trans-[Ni(C(6)F(5))(2)(CNtBu)(2)] (7). The solid-state structures of compounds 3, 4 b, 6, and 7 have been established by X-ray diffraction methods. Complexes 4-6 are rare examples of square-planar Ni(II) carbonyl derivatives.     

Iron-catalyzed intermolecular [2π+2π] cycloaddition

The bis(imino)pyridine iron dinitrogen compounds, ((iPr)PDI)Fe(N(2))(2) and [((Me)PDI)Fe(N(2))](2)(μ(2)-N(2)) ((R)PDI = 2,6-(2,6-R(2)-C(6)H(3)N═CMe)(2)C(5)H(3)N; R = (i)Pr, Me), promote the catalytic intermolecular [2π + 2π] cycloaddition of ethylene and butadiene to form vinylcyclobutane. Stoichiometric experiments resulted in isolation of a catalytically competent iron metallocycle intermediate, which was shown to undergo diene-induced C-C reductive elimination. Deuterium labeling experiments establish competitive cyclometalation of the bis(imino)pyridine aryl substituents during catalytic turnover.     

Stabilization of the P(CF3)(2)(-) and P(C6F5)(2)(-) ions by coordination to pentacarbonyl tungsten: structures of [18-crown-6-K]P(CF3)2, [18-crown-6-K][W[P(CF3)2](CO)5], and [18-crown-6-K][[W(CO)5]2[mu-P(C6F5)2]].THF

The stabilization of the P(CF(3))(2)(-) ion by intermediary coordination to the very weak Lewis acid acetone gives access to single crystals of [18-crown-6-K]P(CF(3))(2). The X-ray single crystal analysis exhibits nearly isolated P(CF(3))(2)(-) ions with an unusually short P-C distance of 184(1) pm, which can be explained by negative hyperconjugation and is also found by quantum chemical hybrid DFT calculation. Coordination of the P(CF(3))(2)(-) ion to pentacarbonyl tungsten has only a minor effect on electronic and geometric properties of the P(CF(3))(2) moiety, while a strong increase in thermal stability of the dissolved species is achieved. The hitherto unknown P(C(6)F(5))(2)(-) ion is stabilized by coordination to pentacarbonyl tungsten and isolated as a stable 18-crown-6 potassium salt, [18-crown-6-K][W[P(C(6)F(5))(2)](CO)(5)], which is fully characterized. The tungstate, [W[P(C(6)F(5))(2)](CO)(5)](-), decomposes slowly in solution, while coordination of the phosphorus atom to a second pentacarbonyl tungsten moiety results in an enhanced thermal stability in solution. The single-crystal X-ray analysis of [18-crown-6-K][[W(CO)(5)](2)[mu-P(C(6)F(5))(2)]].THF exhibits a very tight arrangement of the two C(6)F(5) and two W(CO)(5) groups around the central phosphorus atom. NMR spectroscopic investigations of the [[W(CO)(5)](2)[mu-P(C(6)F(5))(2)]](-) ion exhibit a hindered rotation of both the C(6)F(5) and W(CO)(5) groups in solution.