Deterioration of bulk heterojunction organic photovoltaic devices by a minute amount of oxidized fullerene

A chemical model of deterioration of a bulk heterojunction organic solar cell containing a photooxidized product of 1,4-bis(dimethylphenylsilylmethyl)[60]fullerene suggests that molecular oxygen degrades device performance by two mechanisms.     

Material structure-composite morphology-photovoltaic performance relationship for organic bulk heterojunction solar cells

Conjugated PPV-PPE copolymer has been investigated in organic solar cells in combination with twelve different fullerene derivatives. It was shown that the length of solubilizing alkyl chains in the fullerene derivative structures correlates well with the performance of photovoltaic cells.     

Novel alkoxyanthracene donor and benzothiadiazole acceptor for organic thin film transistor and bulk heterojunction organic photovoltaic cells

Novel alkoxy anthracene (ODA)‐based polymeric semiconductors were designed for polymer solar cell applications. Alkoxyanthracene, which contains many π electrons and electron donating group, was easily synthesized. The copolymers, poly(alkoxy anthracene‐alt‐thiophene benzothiadiazole thiophene) poly(ODA‐TBT) and poly(alkoxy anthracene‐alt‐benzothiadiazole) poly(ODA‐BT), have been obtained by Suzuki coupling polymerization. Both polymers have ODA unit as a donor and benzothiadiazole as an acceptor. ODA‐TBT has thiophene linkages between ODA and benzothiadiazole. The optical, thermal, and electrochemical properties have been investigated by UV–visible absorption, thermal gravimetric analysis, differential scanning calorimetry, and CV. Organic thin‐film transistor using polymers showed that the hole mobility of poly(ODA‐alt‐TBT) was around 3.6 × 10^?3 cm²/Vs with on/off ratio of 9.91 × 10⁵ while that of poly(ODA‐alt‐BT) was around 1.21 × 10^?2 cm²/Vs with on/off ratio of 2.64 × 10⁶. Organic photovoltaic performance based on polymers were evaluated with a configuration of ITO/PEDOT:PSS/active layer/LiF/Al. Poly(ODA‐TBT) exhibits a short circuit current (J_sc) of 3.9 mA/cm² and power conversion efficiency (PCE) of 1.4%, and poly(ODA‐BT) exhibits the J_sc of 6.4 mA/cm² and PCE of 2.2%. The better device performance of poly(ODA‐BT) is attributed to its charge transfer ability and enhanced mobility and crystallinity although poly(ODA‐BT) does not have extended π‐conjugation due to twisted structure compared with poly(ODA‐TBT). © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 1306–1314     

Morphological study of an intrinsically stretchable photovoltaic bulk heterojunction

Thin‐film polymer solar cell consisting of [6,6]‐phenyl‐C71‐butyric acid methyl ester (PC₇₁BM) and poly[[4,8‐bis[(2‐ethylhexyl)oxy]benzo[1,2‐b:4,5‐b′]dithiophene‐2,6‐diyl][3‐fluoro‐2‐[(2‐ethylhexyl)carbonyl]thieno[3,4‐b]thiophenediyl]] (PTB7) demonstrates elastic stretchability with the aid of a high boiling point additive, 1,8‐diiodooctane (DIO). The usage of DIO not only helps to form uniformly distributed nanocrystalline grains, but may also create free volumes between the nano‐grains that allow for relative sliding between the nano‐grains. The relative sliding can accommodate large external deformation. Large dichroic ratios of the optical absorption of both PC₇₁BM and PTB7 were observed under large‐strain deformation, indicating reorientation of the nanocrystalline PC₇₁BM and PTB7 polymer chains along stretching direction. The dichroic ratio decreases to nearly 1.0 as the blend was relaxed to 0% strain. Therefore, the nanometer‐size grain blending morphology provides an approach to impart stretchability to organic semiconductors that are otherwise un‐stretchable. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2018 , 56, 814–820     

Effect of solvent additives on bulk heterojunction morphology of organic photovoltaics and their impact on device performance

Morphology of the active layer in an organic photovoltaic (OPV) device is known to have a significant impact on the device performance. It is, however, difficult to characterize nanoscale morphologies in detail, especially at the ensemble level. Herein, we report the utilization of small angle neutron scattering (SANS) to investigate variations in the nanoscale morphologies of the active layer of poly(3-hexylthiophene-2,5-diyl):[6,6]-phenyl-C₆₁-butyric acid methyl ester (P3HT:PCBM) bulk heterojunction OPV depending on the composition of casting solvent. Both the power law and the poly hard sphere model were utilized to characterize the state of the donor and acceptor components, respectively, from the obtained SANS data. Furthermore, the relationship between the nanoscale morphology and device performance is outlined. It was found that the use of 2-chlorophenol, a poor solvent for P3HT and, at the same time, a very good solvent for PCBM, leads to nanomorphology featuring ordered, highly crystalline P3HT and small (15.2 nm) PCBM domains. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016, 54, 128–134     

Efficient ternary blend bulk heterojunction solar cells with tunable open-circuit voltage

To explore the potential of ternary blend bulk heterojunction (BHJ) photovoltaics as a general platform for increasing the attainable performance of organic solar cells, a model system based on poly(3-hexylthiophene) (P3HT) as the donor and two soluble fullerene acceptors, phenyl-C(61)-butyric acid methyl ester (PC(61)BM) and indene-C(60) bisadduct (ICBA), was examined. In all of the solar cells, the overall ratio of polymer to fullerene was maintained at 1:1, while the composition of the fullerene component (PC(61)BM:ICBA ratio) was varied. Photovoltaic devices showed high short-circuit current densities (J(sc)) and fill factors (FF) (>0.57) at all fullerene ratios, while the open-circuit voltage (V(oc)) was found to vary from 0.61 to 0.84 V as the fraction of ICBA was increased. These results indicate that the V(oc) in ternary blend BHJ solar cells is not limited to the smallest V(oc) of the corresponding binary blend solar cells but can be varied between the extreme V(oc) values without significant effect on the J(sc) or FF. By extension, this result suggests that ternary blends provide a potentially effective route toward maximizing the attainable J(sc)V(oc) product (which is directly proportional to the solar cell efficiency) in BHJ solar cells and that with judicious selection of donor and acceptor components, solar cells with efficiencies exceeding the theoretical limits for binary blend solar cells could be possible without sacrificing the simplicity of a single active-layer processing step.     

Incremental optimization in donor polymers for bulk heterojunction organic solar cells exhibiting high performance

The power conversion efficiency of an organic solar cell has now exceeded the 10% mark, which is a significant improvement in the last decade. This has been made possible due to the development of low-band-gap polymers with tunable electron affinity, ionization potential, solubility, and miscibility with the fullerene acceptor, and the improved understanding of the factors affecting the critical device parameters such as the V_OC and the J_SC. This review examines the latest strategies, results, and trends that have evolved in the design of solar cells with better efficiency and durability. © 2012 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2012     

Microscopic inhomogeneity and ultrafast orientational motion in an organic photovoltaic bulk heterojunction thin film studied with 2D IR vibrational spectroscopy

Two-dimensional infrared vibrational spectroscopy is used to examine conformational inhomogeneity and ultrafast orientational motion within local environments of an organic photovoltaic bulk heterojunction thin film. The bulk heterojunction material consists of a mixture of the electron donor poly[2-methoxy-5-(2'-ethylhexyloxy)-1,4-(1-cyanovinylene)phenylene] (CN-MEH-PPV) and the electron acceptor [6,6]-phenyl-C(61)-butyric acid methyl ester (PCBM). PCBM species reside in a distribution of environments within large domains of the molecules that cause their C=O stretch modes to be inhomogeneously broadened. The molecular inhomogeneity also results in frequency dependent vibrational relaxation dynamics. The butyric acid methyl ester group of PCBM undergoes ultrafast wobbling-in-the-cone orientational motion on the 110 fs time scale within a cone semiangle of 29 degrees . The vibrational dynamics are sensitive metrics of molecular order in the material and have implications for charge mobility and degradation phenomena in organic photovoltaic devices. This report represents the first study of organic photovoltaic materials using ultrafast two-dimensional infrared vibrational spectroscopy.     

Thiophene-free diphenyl-amino-stilbene-diketo-pyrrolo-pyrrole derivatives as donors for organic bulk heterojunction solar cells

An extended study on a group of four soluble diphenyl-amino-stilbene based diphenyl-diketopyrrolo- pyrrole molecules has been carried out. Using the materials in thin-film transistors it was shown that the above-mentioned compounds can be successfully used as donors in organic photovoltaic devices. Influence of the molecular symmetry and solubilizing chain on the morphology and solar cell performance are described. It was shown that a shorter and non-branched ethyl acetate chain leads to higher charge carrier mobility, short circuit current, and better fill factor. After the basic optimization, a power conversion efficiency of about 1.5 % was reached. This, to the best of our knowledge, is the highest reported efficiency of thiophene-free small-molecule diketo-pyrrolopyrroles.     

Compositional dependence of the open-circuit voltage in ternary blend bulk heterojunction solar cells based on two donor polymers

Ternary blend bulk heterojunction (BHJ) solar cells containing as donor polymers two P3HT analogues, high-band-gap poly(3-hexylthiophene-co-3-(2-ethylhexyl)thiophene) (P3HT(75)-co-EHT(25)) and low-band-gap poly(3-hexylthiophene-thiophene-diketopyrrolopyrrole) (P3HTT-DPP-10%), with phenyl-C(61)-butyric acid methyl ester (PC(61)BM) as an acceptor were studied. When the ratio of the three components was varied, the open-circuit voltage (V(oc)) increased as the amount of P3HT(75)-co-EHT(25) increased. The dependence of V(oc) on the polymer composition for the ternary blend regime was linear when the overall polymer:fullerene ratio was optimized for each polymer:polymer ratio. Also, the short-circuit current densities (J(sc)) for the ternary blends were bettter than those of the binary blends because of complementary polymer absorption, as verified using external quantum efficiency measurements. High fill factors (FF) (>0.59) were achieved in all cases and are attributed to high charge-carrier mobilities in the ternary blends. As a result of the intermediate V(oc), increased J(sc) and high FF, the ternary blend BHJ solar cells showed power conversion efficiencies of up to 5.51%, exceeding those of the corresponding binary blends (3.16 and 5.07%). Importantly, this work shows that upon optimization of the overall polymer:fullerene ratio at each polymer:polymer ratio, high FF, regular variations in V(oc), and enhanced J(sc) are possible throughout the ternary blend composition regime. This adds to the growing evidence that the use of ternary blends is a general and effective strategy for producing efficient organic photovoltaics manufactured in a single active-layer processing step.     

Electron donor and acceptor spatial distribution in structured bulk heterojunction photovoltaic devices induced by periodic photopolymerization

Donor and acceptor spatial distributions were directly formed in a surface relief grating of structured bulk heterojunction (BHJ) photovoltaic devices by simple periodic photopolymerization. Enhanced photocurrents were observed in the structured BHJ photovoltaic devices and formation of the D/A spatial distribution was confirmed by Kelvin probe force microscopy. This technique enables the fabrication of structured BHJ photovoltaic devices with solution-processable organic semiconductors, and has tremendous potential for controlling D/A spatial distribution in organic optoelectronics devices.     

Interface configuration effects on excitation,exciton dissociation,and charge recombination in organic photovoltaic heterojunction

The morphology of donor-acceptor heterojunction interface significantly affects the electron/hole processes in organic solar cells, including charge transfer (CT), exciton dissociation (ED), and charge recombination (CR). Here, to investigate interface molecular configuration effects, the donor-acceptor complexes with face-on, edge-on, and end-on configurations were constructed as model systems for the p-SIDT(FBTTh₂)₂/C₆₀ heterojunction. The geometries, electronic structures, and excitation properties of monomers and the complexes with three configurations were studied based on density functional theory (DFT) and time-dependent DFT calculations with optimally tuned range separation parameters and solid polarization effects. In terms of Marcus theory, the rate constants of ED and CR processes were analyzed. The results show that most of the excited states for p-SIDT(FBTTh₂)₂ exhibit an intramolecular CT character, and the similarity of the excitation characters (CT and local excitation) and energies among three complexes with different configurations indicate that the electronic structure and excitation properties are insensitive to the interfacial molecular configurations. However, the rates of ED and CR processes heavily depend on it. These results underline the importance of controlling molecular configuration and then the morphology at the heterojunction interface in organic solar cells.     

Organic light emitting diodes with a solution processible organic bulk heterojunction electroluminescent layer

1. Download : Download full-size image

     

Effects of various donor: acceptor blend ratios on photophysical properties in non-fullerene organic bulk heterojunctions

In this work, the donor:acceptor ratio effected photophysical properties of non-fullerene organic solar cells are comparatively investigated. Effective transportation of the photo-generated charge carriers can be obtained with the PDBD-T:ITIC ratio variation. There is no significant energy loss variation exists in the process of changing the D:A ratio.     

Synthesis of annulated thiophene perylene bisimide analogues: their applications to bulk heterojunction organic solar cells

Annulated thiophene perylene bisimides and their triphenyl-amine based oligomers have been synthesized. One of the oligomers FPTTPA has been demonstrated to be an efficient electron donor in bulk heterojunction (BHJ) organic solar cells, giving a power conversion efficiency of 1.42%.     

Monte Carlo morphological modelling of a P3HT:PCBM bulk heterojunction organic solar cell

To deepen the understanding of morphology evolution in bulk heterojunction P3HT:PCBM organic photovoltaics system by thermal treatment, domain‐size‐dependent interfacial energies were first determined by coarse‐grained molecular dynamics modelling and then used in Monte Carlo simulations of the morphology evolution. Thereby initial conditions associated with optimal interfacial surface area, continuous volume, as well as domain sizes, and spatial distributions of the phase separated domains were identified. In line with earlier studies, a 1:1 P3HT:PCBM blend ratio is found to exhibit the most efficient morphology for exciton dissociation and charge transport. Our simulations reveal that preseeding of P3HT crystal at the anode side prior to the annealing process will be instrumental to pin the formation of P3HT at the favorable electrode especially when seeding exceeds a threshold of 10% surface coverage, whereas denser seeding patterns beyond the threshold did not improve the active layer morphology further. The observed trilayer depth profile (in the absence of preseeded P3HT crystals) implies that the commonly used thickness 100 nm of the active layer is not ideal for ensuring that donor and acceptor phases dominate at opposite ends of the active layer. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2015 , 53, 270–279     

Effects of processing additives in non-fullerene organic bulk heterojunction solar cells with efficiency >11%

The solar cell surface morphologies with different additives observed with slightly changed in roughness. It is easily to get the best PCE of 11.1% with using 0.5% DIO additives.     

Raman study on pentacene:C60 bulk heterojunction films

We measured 785 nm excited Raman and infrared spectra of pentacene-d₁₄. The observed spectra were assigned on the basis of the Raman and infrared spectra calculated by the density functional theory (DFT) method at the B3LYP/6⬜311 + G** level. We measured 785 nm excited Raman spectrum of a pentacne-d₁₄:C₆₀ bulk heterojunction film. The spectrum was assigned on the basis of the wavenumber shifts upon deuteration of pentacene. The assignments of the 1462 and 493 cm^↙1 A_g bands of C₆₀ were confirmed. The 511, 453, and 256 cm^↙1 bands, which were observed only in pentacene:C₆₀ bulk heterojunction films, did not show large deuteration shifts. This result indicates that the 511, 453, and 256 cm^↙1 bands are attributed to activation of the silent modes of C₆₀ due to symmetry lowering_.     

Fluorination vs. chlorination: a case study on high performance organic photovoltaic materials

Halogenation is a very efficient chemical modification method to tune the molecular energy levels, absorption spectra and molecular packing of organic semiconductors. Recently, in the field of organic solar cells(OSCs), both fluorine-and chlorinesubstituted photovoltaic materials, including donors and acceptors, demonstrated their great potentials in achieving high power conversion efficiencies(PCEs), raising a question that how to make a decision between fluorination and chlorination when designing materials. Herein, we systemically studied the impact of fluorination and chlorination on the properties of resulting donors(PBDB-T-2 F and PBDB-T-2 Cl) and acceptors(IT-4 F and IT-4 Cl). The results suggest that all the OSCs based on different donor and acceptor combinations can deliver good PCEs around 13%–14%. Chlorination is more effective than fluorination in downshifting the molecular energy levels and broadening the absorption spectra. The influence of chlorination and fluorination on the crystallinity of the resulting materials is dependent on their introduction positions. As chlorination has the advantage of easy synthesis, it is more attractive in designing low-cost photovoltaic materials and therefore may have more potential in largescale applications.